Origin of Suppressed Chain Transfer in Phosphinephenolato Ni(II)-Catalyzed Ethylene Polymerization.

Recent breakthroughs in the generation of polar-functionalized and more sustainable degradable polyethylenes have been enabled by advanced phosphinephenolato Ni(II) catalysts. A key has been to overcome this type of catalysts' propensity for extensive chain transfer to enable formation of high-molecular-weight polyethylene chains. We elucidate the mechanistic origin of this paradigm shift by a combined experimental and theoretical study. Single-crystal X-ray structural analysis and cyclic voltammetry of a set of six different catalysts with variable electronics and sterics, combined with extensive pressure reactor polymerization studies, suggest that an attractive Ni-aryl interaction of a P-[2-(aryl)phenyl] is responsible for the suppression of chain transfer. This differs from the established picture of steric shielding found for other prominent late transition metal catalysts. Extensive density functional theory studies identify the relevant pathways of chain growth and chain transfer and show how this attractive interaction suppresses chain transfer.

Mechanistic Insights into Ni(II)-Catalyzed Nonalternating Ethylene-Carbon Monoxide Copolymerization.

Polyethylene materials with in-chain-incorporated keto groups were recently enabled by nonalternating copolymerization of ethylene with carbon monoxide in the presence of Ni(II) phosphinephenolate catalysts. We elucidate the mechanism of this long-sought-for reaction by a combined theoretical DFT study of catalytically active species and the experimental study of polymer microstructures formed in pressure-reactor copolymerizations with different catalysts. The pathway leading to the desired nonalternating incorporation proceeds via the cis/trans isomerization of an alkyl-olefin intermediate as the rate-determining step. The formation of alternating motifs is determined by the barrier for the opening of the six-membered C,O-chelate by ethylene binding as the decisive step. An η2-coordination of a P-bound aromatic moiety axially oriented to the metal center is a crucial feature of these Ni(II) catalysts, which also modulates the competition between the two pathways. The conformational constraints imposed in a 2',6'-dimethoxybiphenyl moiety overall result in a desirable combination of disfavoring ethylene coordination along the alternating incorporation pathway, which is primarily governed by electronics, while not overly penalizing the nonalternating chain growth, which is primarily governed by sterics.

Compounded Interplay of Kinetic and Thermodynamic Control over Comonomer Sequences by Lewis Pair Polymerization.

The design of facile synthetic routes to well-defined block copolymers (BCPs) from direct polymerization of one-pot comonomer mixtures, rather than traditional sequential additions, is both fundamentally and technologically important. Such synthetic methodologies often leverage relative monomer reactivity toward propagating species exclusively and therefore are rather limited in monomer scope and control over copolymer structure. The recently developed compounded sequence control (CSC) by Lewis pair polymerization (LPP) utilizes synergistically both thermodynamic (Keq) and kinetic (kp) differentiation to precisely control BCP sequences and suppress tapering and misincorporation errors. Here, we present an in-depth study of CSC by LPP, focusing on the complex interplay of the fundamental Keq and kp parameters, which enable the unique ability of CSC-LPP to precisely control comonomer sequences across a variety of polar vinyl monomer classes. Individual Lewis acid equilibrium and polymerization rate parameters of a range of commercially relevant monomers were experimentally quantified, computationally validated, and rationalized. These values allowed for the judicious design of copolymerizations which probed multiple hypotheses regarding the constructive vs conflicting nature of the relationship between Keq and kp biases, which arise during CSC-LPP of comonomer mixtures. These relationships were thoroughly explored and directly correlated with resultant copolymer microstructures. Several examples of higher-order BCPs are presented, further demonstrating the potential for materials innovation offered by this methodology.

Gold N-Heterocyclic Carbene Catalysts for the Hydrofluorination of Alkynes Using Hydrofluoric Acid: Reaction Scope, Mechanistic Studies and the Tracking of Elusive Intermediates.

An efficient and chemoselective methodology deploying gold-N-heterocyclic carbene (NHC) complexes as catalysts in the hydrofluorination of terminal alkynes using aqueous HF has been developed. Mechanistic studies shed light on an in situ generated catalyst, formed by the reaction of Brønsted basic gold pre-catalysts with HF in water, which exhibits the highest reactivity and chemoselectivity. The catalytic system has a wide alkyl substituted-substrate scope, and stoichiometric as well as catalytic reactions with tailor-designed gold pre-catalysts enable the identification of various gold species involved along the catalytic cycle. Computational studies aid in understanding the chemoselectivity observed through examination of key mechanistic steps for phosphine- and NHC-coordinated gold species bearing the triflate counterion and the elusive key complex bearing a bifluoride counterion.

The Comparison between Single Atom Catalysis and Surface Organometallic Catalysis.

Single atom catalysis (SAC) is a recent discipline of heterogeneous catalysis for which a single atom on a surface is able to carry out various catalytic reactions. A kind of revolution in heterogeneous catalysis by metals for which it was assumed that specific sites or defects of a nanoparticle were necessary to activate substrates in catalytic reactions. In another extreme of the spectrum, surface organometallic chemistry (SOMC), and, by extension, surface organometallic catalysis (SOMCat), have demonstrated that single atoms on a surface, but this time with specific ligands, could lead to a more predictive approach in heterogeneous catalysis. The predictive character of SOMCat was just the result of intuitive mechanisms derived from the elementary steps of molecular chemistry. This review article will compare the aspects of single atom catalysis and surface organometallic catalysis by considering several specific catalytic reactions, some of which exist for both fields, whereas others might see mutual overlap in the future. After a definition of both domains, a detailed approach of the methods, mostly modeling and spectroscopy, will be followed by a detailed analysis of catalytic reactions: hydrogenation, dehydrogenation, hydrogenolysis, oxidative dehydrogenation, alkane and cycloalkane metathesis, methane activation, metathetic oxidation, CO2 activation to cyclic carbonates, imine metathesis, and selective catalytic reduction (SCR) reactions. A prospective resulting from present knowledge is showing the emergence of a new discipline from the overlap between the two areas.

Mechanism of Spatial and Temporal Control in Precision Cyclic Vinyl Polymer Synthesis by Lewis Pair Polymerization.

In typical cyclic polymer synthesis via ring-closure, chain growth and cyclization events are competing with each other, thus affording cyclic polymers with uncontrolled molecular weight or ring size and high dispersity. Here we uncover a mechanism by which Lewis pair polymerization (LPP) operates on polar vinyl monomers that allows the control of where and when cyclization takes place, thereby achieving spatial and temporal control to afford precision cyclic vinyl polymers or block copolymers with predictable molecular weight and low dispersity (≈1.03). A combined experimental and theoretical study demonstrates that cyclization occurs only after all monomers have been consumed (when) via conjugate addition of the propagating chain end to the specific site of the initiating chain end (where), allowing the cyclic polymer formation steps to be regulated and executed with precision in space and time.

Synthesis of Gold(I)-Trifluoromethyl Complexes and their Role in Generating Spectroscopic Evidence for a Gold(I)-Difluorocarbene Species.

Readily prepared and bench-stable [Au(CF3 )(NHC)] compounds were synthesized by using new methods, starting from [Au(OH)(NHC)], [Au(Cl)(NHC)] or [Au(L)(NHC)]HF2 precursors (NHC=N-heterocyclic carbene). The mechanism of formation of these species was investigated. Consequently, a new and straightforward strategy for the mild and selective cleavage of a single carbon/fluorine bond from [Au(CF3 )(NHC)] complexes was attempted and found to be reversible in the presence of an additional nucleophilic fluoride source. This straightforward technique has led to the unprecedented spectroscopic observation of a gold(I)-NHC difluorocarbene species.

Simple Synthetic Routes to Carbene-M-Amido (M=Cu, Ag, Au) Complexes for Luminescence and Photocatalysis Applications.

The development of novel and operationally simple synthetic routes to carbene-metal-amido (CMA) complexes of copper, silver and gold relevant for photonic applications are reported. A mild base and sustainable solvents allow all reactions to be conducted in air and at room temperature, leading to high yields of the targeted compounds even on multigram scales. The effect of various mild bases on the N-H metallation was studied in silico and experimentally, while a mechanochemical, solvent-free synthetic approach was also developed. Our photophysical studies on [M(NHC)(Cbz)] (Cbz=carbazolyl) indicate that the occurrence of fluorescent or phosphorescent states is determined primarily by the metal, providing control over the excited state properties. Consequently, we demonstrate the potential of the new CMAs beyond luminescence applications by employing a selected CMA as a photocatalyst. The exemplified synthetic ease is expected to accelerate the applications of CMAs in photocatalysis and materials chemistry.

Neutral Unsymmetrical Coordinated Cyclophane Polymerization Catalysts.

Cyclophane structures can control steric pressure in the otherwise open spaces of square-planar d8 -metal catalysts. This elegant concept was so far limited to symmetrical coordinated metals. We report how a cyclophane motif can be generated in ligands that chelate via two different donors. An ancillary second imine in the versatile κ2 -N,O-salicylaldiminato catalyst type enables ring closure via olefin metathesis and selective double bond hydrogenation to yield a 30-membered ring efficiently. Experimental and theoretical analyses show the ancillary imine is directed away from the active site and inert for catalysis. In ethylene polymerization the cyclophane catalyst is more active and temperature stable vs. an open structure reference, notably also in polar solvents. Increased molecular weights and decreased degrees of branching can be traced to an increased energy of sterically demanding transition states by the encircling cyclophane while chain propagation remains highly efficient.

Optically Pure C1-Symmetric Cyclic(alkyl)(amino)carbene Ruthenium Complexes for Asymmetric Olefin Metathesis.

An expedient access to the first optically pure ruthenium complexes containing C1-symmetric cyclic (alkyl)(amino)carbene ligands is reported. They demonstrate excellent catalytic performances in asymmetric olefin metathesis with high enantioselectivities (up to 92% ee). Preliminary mechanistic insights provided by density functional theory models highlight the origin of the enantioselectivity.

Barium-Catalysed Dehydrocoupling of Hydrosilanes and Borinic Acids: A Mechanistic Insight.

Invited for the cover of this issue are the groups of Yann Sarazin at the University of Rennes and Laura Falivene at the King Abdullah University of Science and Technology. The image depicts two barium figures working in tandem to mimic the dinuclear nature of the active species in the catalytic cycle described in the manuscript. Read the full text of the article at 10.1002/chem.201904933.

Barium-Catalysed Dehydrocoupling of Hydrosilanes and Borinic Acids: A Mechanistic Insight.

Two very rare cases of barium boryloxides, the homoleptic [Ba(OB{CH(SiMe3 )2 }2 )2 ⋅C7 H8 ] and the heteroleptic [{LONO4 }BaOB{CH(SiMe3 )2 }2 ] stabilised by the multidentate aminoetherphenolate {LONO4 }- , are presented, and their structural properties are discussed. The electron-deficient [Ba(OB{CH(SiMe3 )2 }2 )2 ⋅C7 H8 ] shows, in particular, resilient η6 -coordination of the toluene molecule. Together with its amido parents [Ba{N(SiMe3 )2 }2 ⋅thf2 ] and [Ba{N(SiMe3 )2 }2 ]2 , this complex catalyses the fast and chemoselective dehydrocoupling of borinic acids R2 BOH and hydrosilanes HSiR'3 , yielding borasiloxanes R2 BOSiR'3 in a controlled fashion. The assessment of substrate scope indicates that, for now, the reaction is limited to bulky borinic acids. Kinetic analysis shows that the rate-limiting step of the catalytic manifold traverses a dinuclear transition state. A detailed mechanistic scenario is proposed on the basis of DFT computations, the results of which are fully consistent with experimental data. It consists of a stepwise process with rate-determining nucleophilic attack of a metal-bound O-atom onto the incoming hydrosilane, involving throughout dinuclear catalytically active species.

A Mechanistically and Operationally Simple Route to Metal-N-Heterocyclic Carbene (NHC) Complexes.

We have been puzzled by the involvement of weak organic and inorganic bases in the synthesis of metal-N-heterocyclic carbene (NHC) complexes. Such bases are insufficiently strong to permit the presumed required deprotonation of the azolium salt (the carbene precursor) prior to metal binding. Experimental and computational studies provide support for a base-assisted concerted process that does not require free NHC formation. The synthetic protocol was found applicable to a number of transition-metal- and main-group-centered NHC compounds and could become the synthetic route of choice to form M-NHC bonds.

Biodegradable Polyhydroxyalkanoates by Stereoselective Copolymerization of Racemic Diolides: Stereocontrol and Polyolefin-Like Properties.

Bacterial polyhydroxyalkanoates (PHAs) are a unique class of biodegradable polymers because of their biodegradability in ambient environments and structural diversity enabled by side-chain groups. However, the biosynthesis of PHAs is slow and expensive, limiting their broader applications as commodity plastics. To overcome such limitation, the catalyzed chemical synthesis of bacterial PHAs has been developed, using the metal-catalyzed stereoselective ring-opening (co)polymerization of racemic cyclic diolides (rac-8DLR , R=alkyl group). In this combined experimental and computational study, polymerization kinetics, stereocontrol, copolymerization characteristics, and the properties of the resulting PHAs have been examined. Most notably, stereoselective copolymerizations of rac-8DLMe with rac-8DLR (R=Et, Bu) have yielded high-molecular-weight, crystalline isotactic PHA copolymers that are hard, ductile, and tough plastics, and exhibit polyolefin-like thermal and mechanical properties.

Quantifying electronic similarities between NHC-gold(i) complexes and their isolobal imidazolium precursors.

A series of NHC-gold(i) (NHC = N-heterocyclic carbene) complexes has been studied by DFT calculations, enabling comparison of electronic and NMR behaviour with related protonated and free NHC molecules. Based on calculations, the NMR resonances of the carbenic C2 carbon atom in [Au(NHC)(Cl)] and [NHC(H)][Cl] exhibit increased shielding when compared to the free N-heterocyclic carbenes by an average of 46.6 ± 2.2 and 73.7 ± 4.3 ppm, respectively. A similar trend is observed when analysing the paramagnetic term of the magnetic shielding tensor. Although gold(i) and proton are considered isolobal fragments, imidazolium compounds lack π-backdonation due to the energetic unavailability of d-orbitals in H+. We propose that NHC-gold(i) complexes exhibit important π-backdonation irrespective of the relative amount of σ-donation between the NHC and gold(i)-X (X = anionic ligand) moieties in Au-NHC complexes. Interestingly, a correlation exists between the calculated shielding for gold (197Au) and the π-donation and π-backdonation contributions. We describe that this correlation also exists when analysing the σ-backdonation term, a property generally ignored yet representing a significant energetic contribution to the stability of the C2-Au bond.

Control of Chain Walking by Weak Neighboring Group Interactions in Unsymmetrical Catalysts.

A combined theoretical and experimental study shows how weak attractive interactions of a neighboring group can strongly promote chain walking and chain transfer. This accounts for the previously observed very different microstructures obtained in ethylene polymerization by [κ2-N,O-{2,6-(3',5'-R2C6H3)2C6H3-N═C(H)-(3,5-X,Y-2-O-C6H2)}NiCH3(pyridine)], namely hyperbranched oligomers for remote substituents R = CH3 versus high-molecular-weight polyethylene for R = CF3. From a full mechanistic consideration, the alkyl olefin complex with the growing chain cis to the salicylaldiminato oxygen donor is identified as the key species. Alternative to ethylene chain growth by insertion in this species, decoordination of the monomer to form a cis ß-agostic complex provides an entry into branching and chain-transfer pathways. This release of monomer is promoted and made competitive by a weak η2-coordination of the distal aryl rings to the metal center, operative only for the case of sufficiently electron-rich aryls. This concept for controlling chain walking is underlined by catalysts with other weakly coordinating furan and thiophene motifs, which afford highly branched oligomers with >120 branches per 1000 carbon atoms.

SOMC-Designed Silica Supported Tungsten Oxo Imidazolin-2-iminato Methyl Precatalyst for Olefin Metathesis Reactions.

Synthesis, structure, and olefin metathesis activity of a surface complex [(≡Si-O-)W(═O)(CH3)2-ImDippN] (4) (ImDipp = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-iminato) supported on silica by a surface organometallic chemistry (SOMC) approach are reported. The reaction of N-silylated 2-iminoimidazoline with tungsten(VI) oxytetrachloride generated the tungsten oxo imidazolin-2-iminato chloride complex [ImDippNW(═O)Cl3] (2). This was grafted on partially dehydroxylated silica pretreated at 700 °C (SiO2-700) to afford a well-defined monopodal surface complex [(≡Si-O-)W(═O)Cl2-ImDippN] (3). 3 underwent alkylation by ZnMe2 to produce [(≡Si-O-)W(═O)(CH3)2-ImDippN] (4). The alkylated surface complex was thoroughly characterized by solid-state NMR, elemental microanalysis, Raman, FT-IR spectroscopies, and XAS analysis. 4 proved to be an active precatalyst for self-metathesis of terminal olefins such as propylene and 1-hexene.

Robust Cross-Linked Stereocomplexes and C60 Inclusion Complexes of Vinyl-Functionalized Stereoregular Polymers Derived from Chemo/Stereoselective Coordination Polymerization.

The successful synthesis of highly syndiotactic polar vinyl polymers bearing the reactive pendant vinyl group on each repeat unit, which is enabled by perfectly chemoselective and highly syndiospecific coordination polymerization of divinyl polar monomers developed through this work, has allowed the construction of robust cross-linked supramolecular stereocomplexes and C60 inclusion complexes. The metal-mediated coordination polymerization of three representative polar divinyl monomers, including vinyl methacrylate (VMA), allyl methacrylate (AMA), and N,N-diallyl acrylamide (DAA) by Cs-ligated zirconocenium ester enolate catalysts under ambient conditions exhibits complete chemoselectivity and high stereoselectivity, thus producing the corresponding vinyl-functionalized polymers with high (92% rr) to quantitative (>99% rr) syndiotacticity. A combined experimental (synthetic, kinetic, and mechanistic) and theoretical (DFT) investigation has yielded a unimetallic, enantiomorphic-site-controlled propagation mechanism. Postfunctionalization of the obtained syndiotactic vinyl-functionalized polymers via the thiol-ene click and photocuring reactions readily produced the corresponding thiolated polymers and flexible cross-linked thin-film materials, respectively. Complexation of such syndiotactic vinyl-functionalized polymers with isotactic poly(methyl methacrylate) and fullerene C60 generates supramolecular crystalline helical stereocomplexes and inclusion complexes, respectively. Cross-linking of such complexes affords robust cross-linked stereocomplexes that are solvent-resistant and also exhibit considerably enhanced thermal and mechanical properties compared with the un-cross-linked stereocomplexes.

The Quest for Converting Biorenewable Bifunctional α-Methylene-γ-butyrolactone into Degradable and Recyclable Polyester: Controlling Vinyl-Addition/Ring-Opening/Cross-Linking Pathways.

α-Methylene-γ-butyrolactone (MBL), a naturally occurring and biomass-sourced bifunctional monomer, contains both a highly reactive exocyclic C═C bond and a highly stable five-membered γ-butyrolactone ring. Thus, all previous work led to exclusive vinyl-addition polymerization (VAP) product P(MBL)VAP. Now, this work reverses this conventional chemoselectivity to enable the first ring-opening polymerization (ROP) of MBL, thereby producing exclusively unsaturated polyester P(MBL)ROP with Mn up to 21.0 kg/mol. This elusive goal was achieved through uncovering the thermodynamic, catalytic, and processing conditions. A third reaction pathway has also been discovered, which is a crossover propagation between VAP and ROP processes, thus affording cross-linked polymer P(MBL)CLP. The formation of the three types of polymers, P(MBL)VAP, P(MBL)CLP, and P(MBL)ROP, can be readily controlled by adjusting the catalyst (La)/initiator (ROH) ratio, which is determined by the unique chemoselectivity of the La-X (X = OR, NR2, R) group. The resulting P(MBL)ROP is degradable and can be readily postfunctionalized into cross-linked or thiolated materials but, more remarkably, can also be fully recycled back to its monomer thermochemically. Computational studies provided the theoretical basis for, and a mechanistic understanding of, the three different polymerization processes and the origin of the chemoselectivity.

Selective Reduction of CO2 to CH4 by Tandem Hydrosilylation with Mixed Al/B Catalysts.

This contribution reports the first example of highly selective reduction of CO2 into CH4 via tandem hydrosilylation with mixed main-group organo-Lewis acid (LA) catalysts [Al(C6F5)3 + B(C6F5)3] {[Al] + [B]}. As shown by this comprehensive experimental and computational study, in this unique tandem catalytic process, [Al] effectively mediates the first step of the overall reduction cycle, namely the fixation of CO2 into HCOOSiEt3 (1) via the LA-mediated C═O activation, while [B] is incapable of promoting the same transformation. On the other hand, [B] is shown to be an excellent catalyst for the subsequent reduction steps 2-4, namely the hydrosilylation of the more basic intermediates [1 to H2C(OSiEt3)2 (2) to H3COSiEt3 (3) and finally to CH4] through the frustrated Lewis pair (FLP)-type Si-H activation. Hence, with the required combination of [Al] and [B], a highly selective hydrosilylative reduction of CO2 system has been developed, achieving high CH4 production yield up to 94%. The remarkably different catalytic behaviors between [Al] and [B] are attributed to the higher overall Lewis acidity of [Al] derived from two conflicting factors (electronic and steric effects), which renders the higher tendency of [Al] to form stable [Al]-substrate (intermediate) adducts with CO2 as well as subsequent intermediates 1, 2, and 3. Overall, the roles of [Al] and [B] are not only complementary but also synergistic in the total reduction of CO2, which render both [Al]-mediated first reduction step and [B]-mediated subsequent steps catalytic.