Three-Dimensional Growth of Li2S in Lithium-Sulfur Batteries Promoted by a Redox Mediator.

During the discharge of a lithium-sulfur (Li-S) battery, an electronically insulating 2D layer of Li2S is electrodeposited onto the current collector. Once the current collector is enveloped, the overpotential of the cell increases, and its discharge is arrested, often before reaching the full capacity of the active material. Guided by a new computational platform known as the Electrolyte Genome, we advance and apply benzo[ghi]peryleneimide (BPI) as a redox mediator for the reduction of dissolved polysulfides to Li2S. With BPI present, we show that it is now possible to electrodeposit Li2S as porous, 3D deposits onto carbon current collectors during cell discharge. As a result, sulfur utilization improved 220% due to a 6-fold increase in Li2S formation. To understand the growth mechanism, electrodeposition of Li2S was carried out under both galvanostatic and potentiostatic control. The observed kinetics under potentiostatic control were modeled using modified Avrami phase transformation kinetics, which showed that BPI slows the impingement of insulating Li2S islands on carbon. Conceptually, the pairing of conductive carbons with BPI can be viewed as a vascular approach to the design of current collectors for energy storage devices: here, conductive carbon "arteries" dominate long-range electron transport, while BPI "capillaries" mediate short-range transport and electron transfer between the storage materials and the carbon electrode.

Polysulfide flow batteries enabled by percolating nanoscale conductor networks.

A new approach to flow battery design is demonstrated wherein diffusion-limited aggregation of nanoscale conductor particles at ∼1 vol % concentration is used to impart mixed electronic-ionic conductivity to redox solutions, forming flow electrodes with embedded current collector networks that self-heal after shear. Lithium polysulfide flow cathodes of this architecture exhibit electrochemical activity that is distributed throughout the volume of flow electrodes rather than being confined to surfaces of stationary current collectors. The nanoscale network architecture enables cycling of polysulfide solutions deep into precipitation regimes that historically have shown poor capacity utilization and reversibility and may thereby enable new flow battery designs of higher energy density and lower system cost. Lithium polysulfide half-flow cells operating in both continuous and intermittent flow mode are demonstrated for the first time.

Aqueous semi-solid flow cell: demonstration and analysis.

An aqueous Li-ion flow cell using suspension-based flow electrodes based on the LiTi2(PO4)3-LiFePO4 couple is demonstrated. Unlike conventional flow batteries, the semi-solid approach utilizes fluid electrodes that are electronically conductive. A model of simultaneous advection and electrochemical transport is developed and used to separate flow-induced losses from those due to underlying side reactions. The importance of plug flow to achieving high energy efficiency in flow batteries utilizing highly non-Newtonian flow electrodes is emphasized.

Molecular understanding of polyelectrolyte binders that actively regulate ion transport in sulfur cathodes.

Polymer binders in battery electrodes may be either active or passive. This distinction depends on whether the polymer influences charge or mass transport in the electrode. Although it is desirable to understand how to tailor the macromolecular design of a polymer to play a passive or active role, design rules are still lacking, as is a framework to assess the divergence in such behaviors. Here, we reveal the molecular-level underpinnings that distinguish an active polyelectrolyte binder designed for lithium-sulfur batteries from a passive alternative. The binder, a cationic polyelectrolyte, is shown to both facilitate lithium-ion transport through its reconfigurable network of mobile anions and restrict polysulfide diffusion from mesoporous carbon hosts by anion metathesis, which we show is selective for higher oligomers. These attributes allow cells to be operated for >100 cycles with excellent rate capability using cathodes with areal sulfur loadings up to 8.1 mg cm-2.

Mechanism and Kinetics of Li2S Precipitation in Lithium-Sulfur Batteries.

The kinetics of Li2 S electrodeposition onto carbon in lithium-sulfur batteries are characterized. Electrodeposition is found to be dominated by a 2D nucleation and growth process with rate constants that depend strongly on the electrolyte solvent. Nucleation is found to require a greater overpotential than growth, which results in a morphology that is dependent on the discharge rate.