Gastric Bypass Versus Sleeve Gastrectomy in Type 2 Diabetes: Effects on Hepatic Steatosis and Fibrosis : A Randomized Controlled Trial.

BACKGROUND: Weight loss improves fatty liver disease. No randomized trial has compared the effects of sleeve gastrectomy (SG) and Roux-en-Y gastric bypass (RYGB) on liver fat content and fibrosis. OBJECTIVE: To compare the 1-year effects of SG and RYGB on hepatic steatosis and fibrosis. DESIGN: Single-center, randomized, controlled trial (Oseberg [ObesitySurgery in Tønsberg]). (ClinicalTrials.gov: NCT01778738). SETTING: Tertiary care obesity center in Norway. PARTICIPANTS: 100 patients (65% female; mean age, 47.5 years; mean body mass index, 42 kg/m2) with type 2 diabetes mellitus (T2DM). INTERVENTION: From January 2013 to February 2018, patients were randomly assigned (1:1 ratio) to SG or RYGB. MEASUREMENTS: The primary outcome was remission of T2DM (previously published). Predefined secondary outcomes in the present study were hepatic steatosis and fibrosis assessed by magnetic resonance imaging (liver fat fraction), enhanced liver fibrosis (ELF) test, noninvasive indices, and liver enzymes. RESULTS: Liver fat fraction declined similarly after SG (-19.7% [95% CI, -22.5% to -16.9%]) and RYGB (-21.5% [CI, -24.3% to -18.6%]) from surgery to 1-year follow-up, and almost all patients (SG, 94%; RYGB, 100%) had no or low-grade steatosis at 1 year. The ELF score category remained stable in 77% of patients, but 18% experienced worsening of fibrosis at 1 year, with no substantial between-group difference. LIMITATIONS: Single-center study, short follow-up time, and lack of power for secondary outcomes. CONCLUSION: With an almost complete clearance of liver fat 1 year after surgery, RYGB and SG were both highly effective in reducing hepatic steatosis. Bariatric surgery had less influence on degree of fibrosis in the short term, but assessment of long-term progression is warranted. PRIMARY FUNDING SOURCE: Vestfold Hospital Trust and the South-Eastern Norway Regional Health Authority.

Association between hepatic steatosis and fibrosis with measures of insulin sensitivity in patients with severe obesity and type 2 diabetes - a cross-sectional study.

BACKGROUND: Obesity, non-alcoholic fatty liver disease (NAFLD) and insulin resistance are three pathological conditions highly correlated, but this relationship is not fully elucidated. Hence, we aimed to assess the association of hepatic steatosis and fibrosis with different measures of insulin sensitivity in patients with severe obesity and type 2 diabetes mellitus (T2DM). METHODS: A cross-sectional study (Oseberg trial) including patients with T2DM referred for bariatric surgery at Vestfold Hospital Trust, Norway. Magnetic resonance imaging (MRI) and the enhanced liver fibrosis (ELF) test was used for estimation of liver fat fraction (LFF) and degree of fibrosis, respectively. Oral and intravenous glucose tolerance tests were applied for estimation of insulin sensitivity (HOMA2S, Matsuda ISI and MinMod SI). RESULTS: A total of 100 patients (mean [SD] age 47.5 [9.7] years, 65% women, BMI 42.0 [5.3] kg/m2 and 98% with metabolic syndrome) were included in the analyses. The mean (SD) LFF in the total population was 19.1 (11.5), and the mean (SD) ELF score was 8.46 (0.84), a value representing moderate fibrosis. LFF was inversely associated with HOMA2S and Matsuda ISI, and both measures were significantly higher in the no or low-grade steatosis group compared with the medium-to-high grade steatosis group (mean difference [95% CI] 5.9 [2.2-9.6]%, Cohen's d = 0.75), and (0.7 [0.3-1.1], Cohen's d = 0.80, respectively). There was no association between LFF, as a categorical or continuous variable, and MinMod SI. The proportions of patients with none to mild fibrosis, moderate fibrosis and severe fibrosis were 14, 78 and 6%, respectively, and there were no significant associations between level of fibrosis and measures of insulin sensitivity. CONCLUSIONS: Patients with morbid obesity and T2DM demonstrated high levels of liver fat fraction, and we showed that hepatic steatosis, but not the degree of liver fibrosis, was associated with different measures of insulin sensitivity in patients with severe obesity and T2DM. Further, our results might indicate that the LFF is primarily associated with hepatic, and not peripheral insulin sensitivity. To improve the diagnosis of NAFLD and the prediction of its progression, more studies are needed to reveal the pathological mechanistic pathways involved in NAFLD and insulin sensitivity. TRIAL REGISTRATION: ClinicalTrials.gov: NCT01778738.

Vaccines against sexually transmitted infections: an update.

Sexually transmitted infections (STI) constitute a major share of the diseases encountered by physicians. Although science has made considerable progress in terms of diagnosing and treating such infections, development of effective and safe vaccines is still needed. Syphilis, viral warts, gonorrhoea, genital herpes, chlamydia and trichomoniasis are the most common infections that are transmitted sexually. In this review, we have attempted to summarize the current status, lacunae and avenues for future research, with reference to the development of STI vaccines.

Treatment of Nail Psoriasis.

Nail psoriasis has a considerable negative impact on the quality of life by limiting the patient’s household chores, professional activities and social interactions. Treatment for nail psoriasis is often overlooked with treatment for skin and joint involvement being more emphasized. It is also challenging since the clinical improvement takes a long time to be observed and is often met with poor compliance with treatment. This review focuses on the various treatment options for nail psoriasis after review of literature. The literature research considered published journal articles (clinical trials or scientific reviews). Studies were identified by searching electronic databases (MEDLINE and PubMed) and reference lists of respective articles. Only articles available in English were considered for this review. J Drugs Dermatol. 2022;21(2):146-150. doi:10.36849/JDD.4969.

Abemaciclib-loaded ethylcellulose based nanosponges for sustained cytotoxicity against MCF-7 and MDA-MB-231 human breast cancer cells lines.

Abemaciclib (AC) is a novel, orally available drug molecule approved for the treatment of breast cancer. Due to its low bioavailability, its administration frequency is two to three times a day that can decrease patient compliance. Sustained release formulation are needed for prolong the action and to reduce the adverse effects. The aim of current study was to develop sustained release NSs of AC. Nanosponges (NSs) was prepared by emulsion-solvent diffusion method using ethyl-cellulose (EC) and Kolliphor P-188 (KP-188) as sustained-release polymer and surfactant, respectively. Effects of varying surfactant concentration and drug: polymer proportions on the particle size (PS), polydispersity index (PDI), zeta potential (ζP), entrapment efficiency (%EE), and drug loading (%DL) were investigated. The results of AC loaded NSs (ACN1-ACN5) exhibited PS (366.3-842.2 nm), PDI (0.448-0.853), ζP (-8.21 to -19.7 mV), %EE (48.45-79.36%) and %DL (7.69-19.17%), respectively. Moreover, ACN2 showed sustained release of Abemaciclib (77.12 ± 2.54%) in 24 h Higuchi matrix as best fit kinetics model. MTT assay signified ACN2 as potentials cytotoxic nanocarrier against MCF-7 and MDA-MB-231 human breast cancer cells. Further, ACN2 displayed drug release property without variation in the % release after exposing the product at 25 °C, 5 °C, and 45 °C storage conditions for six months. This investigation proved that the developed NSs would be an efficient carrier to sustain the release of AC in order to improve efficacy against breast cancer.

Development and Characterization of Calcium-Alginate Beads of Apigenin: In Vitro Antitumor, Antibacterial, and Antioxidant Activities.

The objective of this work was to develop sustained-release Ca-alginate beads of apigenin using sodium alginate, a natural polysaccharide. Six batches were prepared by applying the ionotropic gelation technique, wherein calcium chloride was used as a crosslinking agent. The beads were evaluated for particle size, drug loading, percentage yield, and in vitro drug release. Particle size was found to decrease, and drug entrapment efficiency was enhanced with an increase in the polymer concentration. The dissolution study showed sustained drug release from the apigenin-loaded alginate beads with an increase in the polymer proportion. Based on the dissolution profiles, BD6 formulation was optimized and characterized for FTIR, DSC, XRD, and SEM, results of which indicated successful development of apigenin-loaded Ca alginate beads. MTT assay demonstrated a potential anticancer effect against the breast cancer MCF-7 cell lines. The antimicrobial activity exhibited effective inhibition in the bacterial and fungal growth rate. The DPPH measurement revealed that the formulation had substantial antioxidant activity, with EC50 value slightly lowered compared to pure apigenin. A stability study demonstrated that the BD6 was stable with similar (f2) drug release profiles in harsh condition. In conclusion, alginate-based beads could be used for sustaining the drug release of poorly water-soluble apigenin while also improving in vitro antitumor, antimicrobial, and antioxidant activity.

Brigatinib loaded poly(d,l-lactide-co-glycolide) nanoparticles for improved anti-tumoral activity against non-small cell lung cancer cell lines.

OBJECTIVE: The aim of the current investigation was to develop poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) to sustain the brigatinib (BTB) release for prolong time period and to examine the antitumor effect of the optimized NPs. SIGNIFICANCE: Optimized PLGA-based NPs of BTB could be potentially used as a promising nanocarrier for the treatment of non-small cell lung cancer. METHODS: BTB-loaded NPs were fabricated with core-shell of PLGA by solvent evaporation technique using different proportions of PLGA polymer and poly-vinyl alcohol (PVA) stabilizer. The prepared NPs were evaluated for particle characterizations; size, polydispersity index (PDI), zeta-potential, entrapment efficiency (EE), and drug loading (DL), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction studies. The optimized NPs (BN5) were further evaluated for morphology, stability, and cytotoxicity studies against A549 cell-lines. RESULTS: Among the nine different NPs formulae (BN1-BN9), BN5 was optimized with composition of BTB (30 mg), PLGA (75 mg), PVA (0.55% w/v), represents an average particle size of (267.1 ± 1.01 nm), PDI (0.101 ± 0.007), and zeta potential (-42.1 ± 0.75 mV), high EE (66.83 ± 0.06%), and DL (6.17 ± 0.69%). SEM image of selected NPs was spherical with smooth surface. In vitro drug release profile in phosphate buffers (pH 5 and pH 7.4) showed a biphasic release with initial burst phase followed by sustained release for prolong time. Furthermore, optimized NPs (BN5) exhibited excellent cytotoxic activity against A549 cell-lines with IC50 value of 5.25 ± 0.23 µg/mL. CONCLUSION: The overall results suggest that BTB-loaded PLGA NPs could be a potential nanocarrier for lung cancer treatment.

Formulation and in vitro evaluation of topical nanosponge-based gel containing butenafine for the treatment of fungal skin infection.

In the current study, four formulae (BNS1-BNS4) of butenafine (BTF) loaded nanosponges (NS) were fabricated by solvent emulsification technology, using different concentration of ethyl cellulose (EC) and polyvinyl alcohol (PVA) as a rate retarding polymer and surfactant, respectively. Prepared NS were characterized for particle size (PS), polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE) and drug loading (DL). Nanocarrier BNS3 was optimized based on the particle characterizations and drug encapsulation. It was further evaluated for physicochemical characterizations; FTIR, DSC, XRD and SEM. Selected NS BNS3 composed of BTF (100 mg), EC (200 mg) and 0.3% of PVA showed, PS (543 ± 0.67 nm), PDI (0.330 ± 0.02), ZP (-33.8 ± 0.89 mV), %EE (71.3 ± 0.34%) and %DL (22.8 ± 0.67%), respectively. Fabricated NS also revealed; polymer-drug compatibility, drug-encapsulation, non-crystalline state of the drug in the spherical NS as per the physicochemical evaluations. Optimized NS (BNS3) with equivalent amount of (1%, w/w or w/v) BTF was incorporated into the (1%, w/w or w/v) carbopol gel. BTF loaded NS based gel was then evaluated for viscosity, spreadability, flux, drug diffusion, antifungal, stability and skin irritation studies. BNS3 based topical gels exhibited a flux rate of 0.18 (mg/cm2.h), drug diffusion of 89.90 ± 0.87% in 24 h with Higuchi model following anomalous non-Fickian drug release. The BNS3 based-gel could be effective against pathogenic fungal strains.

Sustained release and enhanced oral bioavailability of rivaroxaban by PLGA nanoparticles with no food effect.

The purpose of the currents study was to enhance bioavailability of rivaroxaban (RXB) and reduce the food effect. RXB loaded PLGA nanoparticles (RXB-PLGA-NPs) were prepared by emulsion solvent evaporation method and optimized using central composite design (CDD). The optimized RXB-PLGA-NPs (F8) with composition, PLGA (125 mg), PVA (0.5%w/w) and RXB (20 mg) was found optimum with particle size (496 ± 8.5 nm), PDI (0.607), ZP (- 18.41 ± 3.14 mV), %EE (87.9 ± 8.6) and %DL (9.5 ± 1.6). The optimized NPs (F8) was further evaluated in vitro for DSC, FTIR, SEM and in vitro release studies. A comparative pharmacokinetic studies with commercial tablet (XARELTO®) were conducted on fasted and fed state rats. Compared to commercial tablet (XARELTO®), the RXB-PLGA-NPs (F8) exhibited a significant enhancement of bioavailability in both fasted and fed state. In addition, the bioavailability of RXB from NPs (F8) was found unaffected in the presence of food.

Development of spray-dried amorphous solid dispersions of tadalafil using glycyrrhizin for enhanced dissolution and aphrodisiac activity in male rats.

Tadalafil (TDL) is a phosphodiesterase-5 inhibitor (PDE5I), indicated for erectile dysfunction (ED). However, TDL exhibits poor aqueous solubility and dissolution rate, which may limit its application. This study aims to prepare amorphous solid dispersion (ASD) by spray-drying, using glycyrrhizin-a natural drug carrier. Particle and physicochemical characterizations were performed by particle size, polydispersity index measurement, yield, drug content estimation, Fourier Transformed Infrared (FTIR) spectroscopy, Differential scanning calorimetry (DSC), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and dissolution study. In order to evaluate the aphrodisiac activity of the prepared ASD, sexual behavior study was performed in male rats. It is further considered for the stability study. Our results revealed that TDL-GLZ spray-dried dispersion was a successful drug-carrier binary mixture. XRD and SEM showed that ASD of TDL with GLZ presented in the amorphous state and dented-spherical shape, unlike the drug indicating crystalline and spiked shaped. The optimized ASD3 formulation with particle size (1.92 µm), PDI (0.32), yield (97.78%) and drug content (85.00%) showed 4.07 folds' increase in dissolution rate compared to pure TDL. The results obtained from the in vivo study exhibit significantly improved aphrodisiac activity with ASD3. The stability study revealed that the prepared ASD3 did not show any remarkable changes in the dissolution and drug content for 1 month storage at room temperature.

Hibiscetin attenuates lipopolysaccharide-evoked memory impairment by inhibiting BDNF/caspase-3/NF-κB pathway in rodents.

This study explores the neuroprotective potential of hibiscetin concerning memory deficits induced by lipopolysaccharide (LPS) injection in rats. The aim of this study is to evaluate the effect of hibiscetin against LPS-injected memory deficits in rats. The behavioral paradigms were conducted to access LPS-induced memory deficits. Various biochemical parameters such as acetyl-cholinesterase activity, choline-acetyltransferase, antioxidant (superoxide dismutase, glutathione transferase, catalase), oxidative stress (malonaldehyde), and nitric oxide levels were examined. Furthermore, neuroinflammatory parameters such as tumor necrosis factor-α, interleukin-1ß (IL-1ß), IL-6, and nuclear factor-kappa B expression and brain-derived neurotrophic factor as well as apoptosis marker i.e., caspase-3 were evaluated. The results demonstrated that the hibiscetin-treated group exhibited significant recovery in LPS-induced memory deficits in rats by using behavioral paradigms, biochemical parameters, antioxidant levels, oxidative stress, neuroinflammatory markers, and apoptosis markers. Recent research suggested that hibiscetin may serve as a promising neuroprotective agent in experimental animals and could offer an alternative in LPS-injected memory deficits in rodent models.

Pharmacokinetics and Pharmacodynamics of a Nanostructured Lipid Carrier Co-Encapsulating Artemether and miRNA for Mitigating Cerebral Malaria.

Cerebral malaria (CM), a severe neurological pathology caused by Plasmodium falciparum infection, poses a significant global health threat and has a high mortality rate. Conventional therapeutics cannot cross the blood-brain barrier (BBB) efficiently. Therefore, finding effective treatments remains challenging. The novelty of the treatment proposed in this study lies in the feasibility of intranasal (IN) delivery of the nanostructured lipid carrier system (NLC) combining microRNA (miRNA) and artemether (ARM) to enhance bioavailability and brain targeting. The rational use of NLCs and RNA-targeted therapeutics could revolutionize the treatment strategies for CM management. This study can potentially address the challenges in treating CM, allowing drugs to pass through the BBB. The NLC formulation was developed by a hot-melt homogenization process utilizing 3% (w/w) precirol and 1.5% (w/v) labrasol, resulting in particles with a size of 94.39 nm. This indicates an effective delivery to the brain via IN administration. The results further suggest the effective intracellular delivery of encapsulated miRNAs in the NLCs. Investigations with an experimental cerebral malaria mouse model showed a reduction in parasitaemia, preservation of BBB integrity, and reduced cerebral haemorrhages with the ARM+ miRNA-NLC treatment. Additionally, molecular discoveries revealed that nicotinamide adenine dinucleotide phosphate oxidase 2 (NOX2) and Interleukin-6 (IL-6) levels were reduced in the treated groups in comparison to the CM group. These results support the use of nanocarriers for IN administration, offering a viable method for mitigating CM through the increased bioavailability of therapeutics. Our findings have far-reaching implications for future research and personalized therapy.

Development of Statistically Optimized Piperine-Loaded Polymeric Nanoparticles for Breast Cancer: In Vitro Evaluation and Cell Culture Studies.

Piperine (PPN) is a natural alkaloid derived from black pepper (Piper nigrum L.) and has garnered substantial attention for its potential in breast cancer therapy due to its diverse pharmacological properties. However, its highly lipophilic characteristics and poor dissolution in biological fluids limit its clinical application. Therefore, to overcome this limitation, we formulate and evaluate PPN-encapsulated polycaprolactone (PCL) nanoparticles (PPN-PCL-NPs). The nanoparticles were prepared by a single-step nanoprecipitation method and further optimized by a formulation design approach. The influence of selected independent variables PCL (X1), poloxamer 188 (P-188; X2), and stirring speed (SS; X3) were investigated on the particle size (PS), polydispersity index (PDI), and % encapsulation efficiency (EE). The selected optimized nanoparticles were further assessed for stability, in vitro release, and in vitro antibreast cancer activity in the MCF-7 cancer cell line. The PS, PDI, zeta potential, and % EE of the optimized PPN-PCL-NPs were observed to be 107.61 ± 5.28 nm, 0.136 ± 0.011, -20.42 ± 1.82 mV, and 79.53 ± 5.22%, respectively. The developed PPN-PCL-NPs were stable under different temperature conditions with insignificant changes in their pharmaceutical attributes. The optimized PPN-PCL-NPs showed a burst release for the first 6 h and later showed sustained release for 48 h. The PPN-PCL-NPs exhibit exceptional cytotoxic effects in MCF-7 breast tumor cells in comparison with the native PPN. Thus, the formulation of PPN-loaded PCL-NPs can be a promising approach for better therapeutic efficacy against breast cancer.

Fused Deposition Modelling 3D-Printed Gastro-Retentive Floating Device for Propranolol Hcl Tablets.

Three-dimensional printing has revolutionized drug manufacturing and has provided a solution to the limitations associated with the conventional manufacturing method by designing complex drug delivery systems with customized drug release profiles for personalized therapies. The present investigation aims to design a gastric floating tablet with prolonged gastric floating time and sustained drug release profile. In the present study, a gastro retentive floating device (GRFD) was designed and fabricated using a fused deposition modelling (FDM)-based 3D printing technique. This device acts as a multifunctional dosage form exhibiting prolonged gastric retention time and sustained drug release profile with improved oral bioavailability in the upper gastrointestinal tract. Commercial polyvinyl alcohol (PVA) and polylactic acid (PLA) filaments were used to design GRFD, which was comprised of dual compartments. The outer sealed compartment acts as an air-filled chamber that imparts buoyancy to the device and the inner compartment is filled with a commercial propranolol hydrochloride immediate-release tablet. The device is designed as a round-shaped shell with a central opening of varying size (1 mm, 2 mm, 3 mm, and 4 mm), which acts as a drug release window. Scanning electron microscope (SEM) images were used to determine morphological characterization. The in vitro buoyancy and drug release were evaluated using the USP type II dissolution apparatus. All the designed GRFDs exhibit good floating ability and sustained drug release profiles. GRFDs fabricated using PLA filament show maximum buoyancy (>24 h) and sustained drug release for up to 10 h. The floating ability and drug release from the developed devices were governed by the drug release window opening size and the filament material affinity towards the gastric fluid. The designed GRFDs show great prospects in modifying the drug release characteristics and could be applied to any conventional immediate-release product.

Rosinidin inhibits NF-κB/ Nrf2/caspase-3 expression and restores neurotransmitter levels in rotenone-activated Parkinson's disease.

Objectives: The examination was sighted to study the preventive effects of rosinidin against rotenone-activated Parkinson's disease in rats. Methods: Animals were randamoized into five groups: I-saline, II-rotenone (0.5 mg/kg/b.wt.), III- IV-10 and 20 mg/kg rosinidin after rotenone and V-20 mg/kg rosinidin per se for 28 days and were assigned for behavioral analysis., Biochemical parameters i.e. lipid peroxidation, endogenous antioxidants, nitrite level, neurotransmitter levels, proinflammatory biomarkers such as interleukin- 6 (IL-6), tumor necrosis factor-α, IL-1ß, nuclear factor kappa B, nuclear factor erythroid 2-related factor 2, and caspase-3 were assessed on the 29th day of the research. Results: Rosinidin augmented the effectiveness of rotenone on akinesia, catalepsy, forced-swim test, rotarod, and open-field test. Biochemical findings indicated that treatment of rosinidin showed restoring neuroinflammatory cytokines, antioxidants, and neurotransmitter levels in rotenone-injected rats. Conclusion: As a result of rosinidin treatment, the brain was protected from oxidative stress-induced neuronal damage and inhibited neuroinflammatory cytokines.

Development of Gefitinib-Loaded Solid Lipid Nanoparticles for the Treatment of Breast Cancer: Physicochemical Evaluation, Stability, and Anticancer Activity in Breast Cancer (MCF-7) Cells.

In the current study, the toxic effects of gefitinib-loaded solid lipid nanoparticles (GFT-loaded SLNs) upon human breast cancer cell lines (MCF-7) were investigated. GFT-loaded SLNs were prepared through a single emulsification-evaporation technique using glyceryl tristearate (Dynasan™ 114) along with lipoid® 90H (lipid surfactant) and Kolliphore® 188 (water-soluble surfactant). Four formulae were developed by varying the weight of the lipoid™ 90H (100-250 mg), and the GFT-loaded SLN (F4) formulation was optimized in terms of particle size (472 ± 7.5 nm), PDI (0.249), ZP (-15.2 ± 2.3), and EE (83.18 ± 4.7%). The optimized formulation was further subjected for in vitro release, stability studies, and MTT assay against MCF-7 cell lines. GFT from SLNs exhibited sustained release of the drug for 48 h, and release kinetics followed the Korsmeyer-Peppas model, which indicates the mechanism of drug release by swelling and/or erosion from a lipid matrix. When pure GFT and GFT-SLNs were exposed to MCF-7 cells, the activities of p53 (3.4 and 3.7 times), caspase-3 (5.61 and 7.7 times), and caspase-9 (1.48 and 1.69 times) were enhanced, respectively, over those in control cells. The results suggest that GFT-loaded SLNs (F4) may represent a promising therapeutic alternative for breast cancer.

Design and Characterization of Baricitinib Incorporated PLA 3D Printed Pills by Fused Deposition Modeling: An Oral Pill for Treating Alopecia Areata.

This study aimed to develop three-dimensional (3D) baricitinib (BAB) pills using polylactic acid (PLA) by fused deposition modeling. Two strengths of BAB (2 and 4% w/v) were dissolved into the (1:1) PEG-400 individually, diluting it with a solvent blend of acetone and ethanol (27.8:18:2) followed by soaking the unprocessed 200 cm~6157.94 mg PLA filament in the solvent blend acetone-ethanol. FTIR spectrums of the 3DP1 and 3DP2 filaments calculated and recognized drug encapsulation in PLA. Herein, 3D-printed pills showed the amorphousness of infused BAB in the filament, as indicated by DSC thermograms. Fabricated pills shaped like doughnuts increased the surface area and drug diffusion. The releases from 3DP1 and 3DP2 were found to be 43.76 ± 3.34% and 59.14 ± 4.54% for 24 h. The improved dissolution in 3DP2 could be due to the higher loading of BAB due to higher concentration. Both pills followed Korsmeyer-Peppas' order of drug release. BAB is a novel JAK inhibitor that U.S. FDA has recently approved to treat alopecia areata (AA). Therefore, the proposed 3D printed tablets can be easily fabricated with FDM technology and effectively used in various acute and chronic conditions as personalized medicine at an economical cost.