Flexible molecular crystals for optoelectronic applications.

The cornerstones of the advancement of flexible optoelectronics are the design, preparation, and utilization of novel materials with favorable mechanical and advanced optoelectronic properties. Molecular crystalline materials have emerged as a class of underexplored yet promising materials due to the reduced grain boundaries and defects anticipated to provide enhanced photoelectric characteristics. An inherent drawback that has precluded wider implementation of molecular crystals thus far, however, has been their brittleness, which renders them incapable of ensuring mechanical compliance required for even simple elastic or plastic deformation of the device. It is perplexing that despite a plethora of reports that have in the meantime become available underpinning the flexibility of molecular crystals, the "discovery" of elastically or plastically deformable crystals remains limited to cases of serendipitous and laborious trial-and-error approaches, a situation that calls for a systematic and thorough assessment of these properties and their correlation with the structure. This review provides a comprehensive and concise overview of the current understanding of the origins of crystal flexibility, the working mechanisms of deformations such as plastic and elastic bending behaviors, and insights into the examples of flexible molecular crystals, specifically concerning photoelectronic changes that occur in deformed crystals. We hope this summary will provide a reference for future experimental and computational efforts with flexible molecular crystals aimed towards improving their mechanical behavior and optoelectronic properties, ultimately intending to advance the flexible optoelectronic technology.

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides.

Poly(α-hydroxy acids) are important biodegradable polymers with wide applications. Attempts to synthesize them from O-carboxyanhydrides with pendant functional groups by various methods, including methods involving organocatalysts or organometallics, have been plagued by uncontrolled polymerization, including epimerization for some monomers, which hampers the preparation of stereoregular high-molecular-weight polymers. Herein we describe an effective protocol that combines photoredox Ni/Ir catalysis with the use of a Zn-alkoxide for efficient ring-opening polymerization, allowing for the synthesis of isotactic polyesters with expected molecular weights (>140 kDa) and narrow molecular weight distributions (Mw/Mn < 1.1). Mechanistic studies indicate that the use of a low temperature (-20 °C) and photoredox Ni/Ir catalysis synergistically accelerates ring-opening and decarboxylation of the monomer for chain propagation while avoiding the formation of the undesired Ni-carbonyl complex.

In Situ Super-Hindrance-Triggered Multilayer Cracks for Random Lasing in π-Functional Nanopolymer Films.

In situ self-assembly of semiconducting emitters into multilayer cracks is a significant solution-processing method to fabricate organic high-Q lasers. However, it is still difficult to realize from conventional conjugated polymers. Herein, we create the molecular super-hindrance-etching technology, based on the π-functional nanopolymer PG-Cz, to modulate multilayer cracks applied in organic single-component random lasers. Massive interface cracks are formed by promoting interchain disentanglement with the super-steric hindrance effect of π-interrupted main chains, and multilayer morphologies with photonic-crystal-like ordering are also generated simultaneously during the drop-casting method. Meanwhile, the enhancement of quantum yields on micrometer-thick films (Φ = 40% to 50%) ensures high-efficient and ultrastable deep-blue emission. Furthermore, a deep-blue random lasing is achieved with narrow linewidths ~0.08 nm and high-quality factors Q ≈ 5,500 to 6,200. These findings will offer promising pathways of organic π-nanopolymers for the simplification of solution processes applied in lasing devices and wearable photonics.

Enhanced Efficiency of Exciplex Emission from a 9-Phenylfluorene Derivative.

The exciplex-thermally activated delayed fluorescence (exciplex-TADF) system is an excellent candidate for the fabrication of high-efficiency organic light-emitting diodes (OLEDs) because of its more easily achieved small singlet-triplet energy splitting (ΔEST) and doping control. However, exciplex-TADF is still faced with the problems of low external quantum efficiency (ηext) and unclear effect of structure modification in electron acceptors. Herein, we provide a steric hindrance increase strategy to obtain high-efficiency exciplex emissions. Through introducing a 9-phenylfluorene group into N-ethylcarbazole of the dicyano-substituted 9-phenylfluorene, an electron acceptor material with increased steric hindrance is obtained, which helps the exciplex harvest a larger driving force and higher emission efficiencies. Encouragingly, the obtained OLED displays a maximum ηext of 25.8%, which is one of the best efficiency values among reported exciplex-OLEDs, simultaneously possessing excellent current efficiency of 83.6 cd A-1 and power efficiency of 93.7 lm W-1. It is expected that this work will offer a new avenue for designing electron acceptors for highly efficient exciplex emissions.

Synthesis and photovoltaic properties of organic sensitizers incorporating a thieno[3,4-c]pyrrole-4,6-dione moiety.

Novel organic sensitizers containing a thieno[3,4-c]pyrrole-4,6-dione (TPD) moiety with triphenylamine or julolidine as the electron donor have been designed and synthesized for quasi-solid-state dye-sensitized solar cells (DSSCs). For comparison, two organic dyes based on a terthiophene spacer have also been synthesized. The absorption, electrochemical and photovoltaic properties of all sensitizers have been systematically investigated. We found that the incorporation of TPD is highly beneficial to broaden the absorption spectra of the organic sensitizers and prevent the intermolecular interaction. Therefore, the charge recombination possibility is reduced, which is revealed by the controlled intensity modulated photovoltage spectroscopy. A quasi-solid-state DSSC based on sensitizer FNE38 with TPD and triphenylamine moieties demonstrates a solar energy conversion efficiency of 4.71% under standard AM 1.5G sunlight without the use of coadsorbant agents.

Near infrared thieno[3,4-b]pyrazine sensitizers for efficient quasi-solid-state dye-sensitized solar cells.

Three near infrared (NIR) metal-free organic sensitizers (FNE32, FNE34, FNE36) based on the thieno[3,4-b]pyrazine derivative have been designed and synthesized for application in quasi-solid-state dye-sensitized solar cells (DSSCs). These organic dyes demonstrate maximum absorption bands at 596-625 nm due to the presence of the thieno[3,4-b]pyrazine derivative, which facilitates the intramolecular electron transfer from the donor to the acceptor. Quasi-solid-state DSSCs based on FNE34 display efficient photoelectric conversion over the whole visible range extending into the NIR region up to 900 nm with maximum incident monochromatic photon-to-electron conversion efficiency (IPCE) of 77%, yielding a short-circuit photocurrent density of 16.24 mA cm(-2) and a power conversion efficiency of 5.30%. To the best of our knowledge, this is the highest efficiency for quasi-solid-state DSSCs based on an organic NIR dye. When exposed to one-sun illumination for 1000 h, the quasi-solid-state DSSC based on FNE34 exhibits good long-term stability with almost constant power conversion efficiency.

Gridization-Driven Mesoscale Self-Assembly of Conjugated Nanopolymers into Luminescence-Anisotropic Photonic Crystals.

Organic semiconducting emitters integrated with butterfly-mimetic photonic crystals (PhCs) are fascinating for dramatic advantages over light outcoupling efficiency and multifunctional strain sensors, as well as the key step toward electrically pumped lasers. Herein, an unprecedentedly direct mesoscale self-assembly into 1D PhCs is reported through a covalently gridization-driven approach of wide-bandgap conjugated polymers. A simple solvent-casting procedure allows for in situ self-assembly of the state-of-the-art conjugated nanopolymer, poly{[4-(octyloxy)-9,9-diphenylfluoren-2,7-diyl]grid}-co-{[5-(octyloxy)-9,9-diphenylfluoren-2,7-diyl]grid} (PODPFG), into well-defined multilayer architectures with an excellent toughness (30-40 J m-3 ). This ordered meso-architecture shows a typical Bragg-Snell diffraction behavior to testify the PhC nature, along with a high effective refractive index (1.80-1.88) and optical transmittance (85-87%). The PhC films also exhibit an angle-dependent blue/green photoluminescence switching, an electroluminescence efficiency enhancement by 150-250%, and an amplified spontaneous emission enhancement with ultralow waveguide loss coefficient (2.60 cm-1 ). Gridization of organic semiconductors offers promising opportunities for cross-scale morphology-directed molecular design in multifunctional organic mechatronics and intelligences.

Photocatalyst-independent photoredox ring-opening polymerization of O-carboxyanhydrides: stereocontrol and mechanism.

Photoredox ring-opening polymerization of O-carboxyanhydrides allows for the synthesis of polyesters with precisely controlled molecular weights, molecular weight distributions, and tacticities. While powerful, obviating the use of precious metal-based photocatalysts would be attractive from the perspective of simplifying the protocol. Herein, we report the Co and Zn catalysts that are activated by external light to mediate efficient ring-opening polymerization of O-carboxyanhydrides, without the use of exogenous precious metal-based photocatalysts. Our methods allow for the synthesis of isotactic polyesters with high molecular weights (>200 kDa) and narrow molecular weight distributions (M w/M n < 1.1). Mechanistic studies indicate that light activates the oxidative status of a CoIII intermediate that is generated from the regioselective ring-opening of the O-carboxyanhydride. We also demonstrate that the use of Zn or Hf complexes together with Co can allow for stereoselective photoredox ring-opening polymerizations of multiple racemic O-carboxyanhydrides to synthesize syndiotactic and stereoblock copolymers, which vary widely in their glass transition temperatures.

Functionalized Polyesters via Stereoselective Electrochemical Ring-Opening Polymerization of O-Carboxyanhydrides.

Ring-opening polymerization is used to prepare polyesters with precisely controlled molecular weights, molecular weight distributions, and tacticities. Herein, we report a Co/Zn catalytic system that can be activated by an electrical current to mediate efficient ring-opening polymerization of enantiopure O-carboxyanhydrides, allowing for the synthesis of isotactic functionalized polyesters with high molecular weights (>140 kDa) and narrow molecular weight distributions (Mw/Mn < 1.1). We also demonstrate that these catalysts can be used for stereoselective ring-opening polymerization of racemic O-carboxyanhydrides to synthesize syndiotactic or stereoblock copolymers with different glass transition temperatures compared with their atactic counterparts.

Stereoselective gridization and polygridization with centrosymmetric molecular packing.

The gridarenes, with well-defined edges and vertices, represent versatile nanoscale building blocks for the installation of frameworks and architectures but suffer from difficulty in stereoselective control during their synthesis. Here we report a diastereoselective gridization of superelectrophilic diazafluorene-containing substrates (AmBn) with crescent shapes into Drawing Hands grids (DHGs). The meso-selectivity reaches 75.6% diastereomeric excess (de) during the gridization of A1B1-type substrates and maintains ~80% de during the polygridization of A2B2-type monomers. Such stereocontrol originates from the centrosymmetric molecular packing of two charge-delocalized superelectrophiles with synergistically π-π stacking attractions and coulombic repulsions. As meso-stereoregular structures show 20∼30 nm in length, the rigid ring/chain-alternating polygrids have a Mark-Houwink exponent of 1.651 and a molecular weight (M) dependence of the hydrodynamic radius Rh ∼ M1.13. Via the simulation of chain collapse, meso-configured polygridarenes still adopt rod-like conformations that facilitate the high rigidity of organic nanopolymers, distinguished from toroid backbones of rac-type polygrids.

Stereoselective photoredox ring-opening polymerization of O-carboxyanhydrides.

Biodegradable polyesters with various tacticities have been synthesized by means of stereoselective ring-opening polymerization of racemic lactide and ß-lactones but with limited side-chain groups. However, stereoselective synthesis of functional polyesters remains challenging from O-carboxyanhydrides that have abundant pendant side-chain functional groups. Herein we report a powerful strategy to synthesize stereoblock polyesters by stereoselective ring-opening polymerization of racemic O-carboxyanhydrides with the use of photoredox Ni/Ir catalysts and a selected Zn complex with an achiral ligand. The obtained stereoblock copolymers are highly isotactic with high molecular weights ( > 70 kDa) and narrow molecular weight distributions (Mw/Mn < 1.1), and they display distinct melting temperatures that are similar to their stereocomplex counterparts. Furthermore, in one-pot photoredox copolymerization of two different O-carboxyanhydrides, the use of such Zn complex mediates kinetic resolution of the comonomers during enchainment and shows a chirality preference that allows for the synthesis of gradient copolymers.

4,5-Diazafluorene-Based Donor-Acceptor Small Molecules as Charge Trapping Elements for Tunable Nonvolatile Organic Transistor Memory.

Three diazafluorene derivatives triphenylamine (TPA)(PDAF) n (n = 1, 2, 3) serving as small molecular elements are designed and synthesized via concentrated sulfuric acid mediated Friedel-Crafts reaction. With highly nonplanar topological configuration, TPA(PDAF)3 shows weaker intermolecular interaction in the solid states and thus exhibits single nanomolecular behavior, which is crucial for charge stored and retained in an organic field-effect transistor (OFET) memory device. Furthermore, diazafluorene derivatives possess a completely separate highest occupied molecular orbital/lowest unoccupied molecular orbital, which offers ideal hole and electron trapping sites. As charge storage elements, triphenylamine groups provide the hole trapping sites, while diazafluorene units provide the electron trapping sites and act as a hole blocking group to restrain the leakage of stored holes trapped in triphenylamine. The pentacene-based OFET memory device with solution-processing TPA(PDAF)3 shows a good hole-trapping ability, high hole trapping density (4.55 × 1012 cm-2), fast trapping speed (<20 ms), a large memory window (89 V), and a tunable ambipolar memory behavior. The optimized device shows a large ON/OFF current ratio (2.85 × 107), good charge retention (>104 s), and reliable endurance properties. This study suggests that diazafluorene based donor-acceptor small molecular elements have great promise for high-performance OFET memory.

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes.

Here, we describe an effective protocol that combines photoredox Ni/Ir catalysis with the use of a Zn-alkoxide for efficient ring-opening polymerization, allowing for the synthesis of isotactic poly(α-hydroxy acids) with expected molecular weights (>140 kDa) and narrow molecular weight distributions (Mw/Mn < 1.1). This ring-opening polymerization is mediated by Ni and Zn complexes in the presence of an alcohol initiator and a photoredox Ir catalyst, irradiated by a blue LED (400 - 500 nm). The polymerization is performed at a low temperature (-15 °C) to avoid undesired side reactions. The complete monomer consumption can be achieved within 4 - 8 hours, providing a polymer close to the expected molecular weight with narrow molecular weight distribution. The resulted number-average molecular weight shows a linear correlation with the degree of polymerization up to 1000. The homodecoupling 1H NMR study confirms that the obtained polymer is isotactic without epimerization. This polymerization reported herein offers a strategy for achieving rapid, controlled O-carboxyanhydrides polymerization to prepare stereoregular poly(α-hydroxy acids) and its copolymers bearing various functional side-chain groups.

Anticancer nanoparticulate polymer-drug conjugate.

We review recent progress in polymer-drug conjugate for cancer nanomedicine. Polymer-drug conjugates, including the nanoparticle prepared from these conjugates, are designed to release drug in tumor tissues or cells in order to improve drugs' therapeutic efficacy. We summarize general design principles for the polymer-drug conjugate, including the synthetic strategies, the design of the chemical linkers between the drug and polymer in the conjugate, and the in vivo drug delivery barriers for polymer-drug conjugates. Several new strategies, such as the synthesis of polymer-drug conjugates and supramolecular-drug conjugates, the use of stimulus-responsive delivery, and triggering the change of the nanoparticle physiochemical properties to over delivery barriers, are also highlighted.

Novel thiazolo[5,4-d]thiazole-based organic dyes for quasi-solid-state dye-sensitized solar cells.

A series of novel metal-free organic dyes containing the thiazolo[5,4-d]thiazole moiety were designed and synthesized for quasi-solid-state dye-sensitized solar cells (DSSCs). Different alkoxy chains were introduced into the electron donor part of the dye molecules for comparison. The optical, electrochemical, and photovoltaic properties for all sensitizers were systematically investigated. It was found that the sensitizers with the different alkoxy groups have similar photophysical and electrochemical properties, such as absorbance and energy levels, owing to their close chemical structures. However, the quasi-solid-state DSSCs based on the resulting sensitizers exhibit different performance parameters. The quasi-solid-state DSSC based on sensitizer FNE74 with two octyloxy chains possessed the highest solar energy conversion efficiency of 5.10 % under standard AM 1.5G sunlight illumination without the use of coadsorbant agents.

Enhanced performance of quasi-solid-state dye-sensitized solar cells by branching the linear substituent in sensitizers based on thieno[3,4-c]pyrrole-4,6-dione.

Thieno[3,4-c]pyrrole-4,6-dione-based organic sensitizers with triphenylamine (FNE38 and FNE40) or julolidine (FNE39 and FNE41) as electron-donating unit have been designed and synthesized. A linear hexyl group or a branched alkyl chain, the 2-ethylhexyl group, is incorporated into molecular skeleton of the dyes to minimize intermolecular interactions. The absorption, electrochemical, and photovoltaic properties for these sensitizers were then systematically investigated. It is found that the sensitizers have similar photophysical and electrochemical properties, such as absorption spectra and energy levels, owing to their close chemical structures. However, the quasi-solid-state dye-sensitized solar cells (DSSCs) based on the two types of sensitizers exhibit very different performance parameters. Upon the incorporation of the short ethyl group on the hexyl moiety, enhancements in both open-circuit voltage (V(oc)) and short-circuit current (J(sc)) are achieved for the quasi-solid-state DSSCs. The V(oc) gains originating from the suppression of charge recombination were quantitatively investigated and are in good agreement with the experimentally observed V(oc) enhancements. Therefore, an enhanced solar energy conversion efficiency (η) of 6.16%, constituting an increase by 23%, is achieved under standard AM 1.5 sunlight without the use of coadsorbant agents for the quasi-solid-state DSSC based on sensitizer FNE40, which bears the branched alkyl group, in comparison with that based on FNE38 carrying the linear alkyl group. This work presents a design concept for considering the crucial importance of the branched alkyl substituent in novel metal-free organic sensitizers.

Embedding an electron donor or acceptor into naphtho[2,1-b:3,4-b']dithiophene based organic sensitizers for dye-sensitized solar cells.

An electron donor and acceptor, respectively, is embedded into naphtho[2,1-b:3,4-b']dithiophene based organic sensitizers to tune their optoelectronic properties. The DSSC based on FNE52 containing an auxiliary electron acceptor displays a maximum power conversion efficiency of 8.2% and good long-term stability.

Reduced graphene oxide-TaON composite as a high-performance counter electrode for Co(bpy)3(3+/2+)-mediated dye-sensitized solar cells.

We report herein the investigation of TaON nanoparticles incorporating a reduced graphene oxide (RGO) nanocomposite as a counter electrode for application in Co(bpy)3(3+/2+) (bpy = 2,2'-bipyridine)-mediated dye-sensitized solar cells (DSSCs). The RGO-TaON nanocomposite has been prepared by mixing graphene oxide (GO) and presynthesized TaON nanoparticles in ethanol/water followed by the facile hydrazine hydrate reduction of GO to RGO. Compared with RGO or TaON alone, the RGO-TaON nanocomposite shows a much higher electrocatalytic activity for the reduction of Co(bpy)3(3+) species owing to synergistic effects, resulting in significantly improved solar-cell performance when it is applied as the counter electrode in DSSCs. An efficiency of 7.65% for the DSSC with the RGO-TaON counter electrode is obtained, competing with the efficiency produced by the Pt counter electrode; additionally, the former exhibits a much better electrochemical stability than the latter in a Co(bpy)3(3+/2+) acetonitrile solution.

Facile and selective synthesis of oligothiophene-based sensitizer isomers: an approach toward efficient dye-sensitized solar cells.

Two sets of isomeric organic dyes with n-hexyl (DH and AH) or 2-ethylhexyl (DEH and AEH) groups substituted at the spacer part have been designed and straightforwardly synthesized via a facile and selective synthetic route. The structure difference between the isomers stands at the position of the incorporated alkyl chains which are introduced into the terthiophene spacer close to the donor (D) or anchor (A) side. The relationship between the isomeric structures and the optoelectronic properties are systematically investigated. It is found that, in the D series dyes, the alkyl group is much closer to the aromatic donor moiety, which brings about strong steric hindrance and therefore causes a remarkable twist in the molecular skeleton. In contrast, a more planar chemical structure and more effective π-conjugation are realized in the A series dye isomers. Consequently, the A series isomeric dyes demonstrate bathochromically shifted absorption bands, resulting in the improved light-harvesting capability and enhanced photo-generated current. However, the D series isomeric dyes with more twisted molecular skeleton have suppressed the intermolecular interactions and retarded the charge recombination more efficiently, which induces higher open-circuit photovoltage. Combining the two effects on the performance of the fabricated dye-sensitized solar cells (DSSC), the influence from the short-circuit photocurrent plays a more significant role on the power conversion efficiency (η). As a result, isomer AEH-based DSSC with quasi-solid-state electrolyte displays the highest η of 7.10% which remained at 98% of the initial value after continuous light soaking for 1000 h. Promisingly, a η of 8.66% has been achieved for AEH-based DSSC with liquid electrolyte containing Co(II)/(III) redox couple. This work presents the crucial issue of molecular engineering and paves a way to design organic sensitizers for highly efficient and stable DSSCs.