Interface-modulated kinetic differentials in electron and hole transfer rates as a key design principle for redox photocatalysis by Sb2VO5/QD heterostructures.

The efficient conversion of solar energy to chemical energy represents a critical bottleneck to the energy transition. Photocatalytic splitting of water to generate solar fuels is a promising solution. Semiconductor quantum dots (QDs) are prime candidates for light-harvesting components of photocatalytic heterostructures, given their size-dependent photophysical properties and band-edge energies. A promising series of heterostructured photocatalysts interface QDs with transition-metal oxides which embed midgap electronic states derived from the stereochemically active electron lone pairs of p-block cations. Here, we examine the thermodynamic driving forces and dynamics of charge separation in Sb2VO5/CdSe QD heterostructures, wherein a high density of Sb 5s2-derived midgap states are prospective acceptors for photogenerated holes. Hard-x-ray valence band photoemission spectroscopy measurements of Sb2VO5/CdSe QD heterostructures were used to deduce thermodynamic driving forces for charge separation. Interfacial charge transfer dynamics in the heterostructures were examined as a function of the mode of interfacial connectivity, contrasting heterostructures with direct interfaces assembled by successive ion layer adsorption and reaction (SILAR) and interfaces comprising molecular bridges assembled by linker-assisted assembly (LAA). Transient absorption spectroscopy measurements indicate ultrafast (<2 ps) electron and hole transfer in SILAR-derived heterostructures, whereas LAA-derived heterostructures show orders of magnitude differentials in the kinetics of hole (<100 ps) and electron (∼1 ns) transfer. The interface-modulated kinetic differentials in electron and hole transfer rates underpin the more effective charge separation, reduced charge recombination, and greater photocatalytic efficiency observed for the LAA-derived Sb2VO5/CdSe QD heterostructures.

Effect of Stereochemically Active Electron Lone Pairs on Magnetic Ordering in Trivanadates.

Stereoactive electron lone pairs derived from filled 5/6s2 states of p-block cations are an intriguing electronic and geometric structure motif that have been exploited for diverse applications such as thermoelectrics, thermochromics, photocatalysis, and nonlinear optics. Layered trivanadates are dynamic intercalation hosts, where the insertion of cations can be used to tune electron correlation, charge localization, and magnetic ordering. However, the interaction of 5/6s2 stereoactive electron lone pairs with layered trivanadates remains unexplored. In this study, we contrast s- and p-block trivanadates and map off-centering in the coordination environment and reduction in symmetry arising from the stereochemical activity of lone pair cations to the emergence of filled antibonding lone-pair 6s2-O 2p hybridized states. The former is studied by high-resolution single-crystal X-ray diffraction studies of TlV3O8 and isostructural RbV3O8 to probe distinct differences in Tl and Rb coordination environments and the resulting modulation of V-V interactions in V3O8 slabs. The latter has been probed by variable-energy hard X-ray photoelectron spectroscopy (HAXPES) measurements, which manifest orbital-specific contributions from bonding and antibonding interactions of stereoactive Tl 6s2 electron lone pairs in TlV3O8. The spectroscopic assignment of valence band states to stereoactive lone pairs is further corroborated by first-principles electronic structure calculations, crystal orbital Hamilton population analyses, and electron localization function maps. The presence of the Tl 6s2 electron lone pair in TlV3O8 brings about the off-centering of Tl+ cations, which leads to anisotropy in Tl-O bonds. The off-centering of Tl ions weakens V-O bonds in one direction, which subsequently strengthens directional V-V coupling. Magnetic measurements reveal ferromagnetic signatures for both RbV3O8 and TlV3O8. However, the differences in V···V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 140 K for TlV3O8 as compared to 125 K for RbV3O8. The results demonstrate the distinctive effects of stereochemically active lone pairs in modifying electronic structure near the Fermi level and for mediating superexchange interactions.

Evidence that gecko setae are coated with an ordered nanometre-thin lipid film.

The fascinating adhesion of gecko to virtually any material has been related to surface interactions of myriads of spatula at the tips of gecko feet. Surprisingly, the molecular details of the surface chemistry of gecko adhesion are still largely unknown. Lipids have been identified within gecko adhesive pads. However, the location of the lipids, the extent to which spatula are coated with lipids, and how the lipids are structured are still open questions. Lipids can modulate adhesion properties and surface hydrophobicity and may play an important role in adhesion. We have therefore studied the molecular structure of lipids at spatula surfaces using near-edge X-ray absorption fine structure imaging. We provide evidence that a nanometre-thin layer of lipids is present at the spatula surfaces of the tokay gecko (Gekko gecko) and that the lipids form ordered, densely packed layers. Such dense, thin lipid layers can effectively protect the spatula proteins from dehydration by forming a barrier against water evaporation. Lipids can also render surfaces hydrophobic and thereby support the gecko adhesive system by enhancement of hydrophobic-hydrophobic interactions with surfaces.

Multimodal electrochemistry coupled microcalorimetric and X-ray probing of the capacity fade mechanisms of Nickel rich NMC - progress and outlook.

Lithium nickel manganese cobalt oxide (NMC) is a commercially successful Li-ion battery cathode due to its high energy density; however, its delivered capacity must be intentionally limited to achieve capacity retention over extended cycling. To design next-generation NMC batteries with longer life and higher capacity the origins of high potential capacity fade must be understood. Operando hard X-ray characterization techniques are critical for this endeavor as they allow the acquisition of information about the evolution of structure, oxidation state, and coordination environment of NMC as the material (de)lithiates in a functional battery. This perspective outlines recent developments in the elucidation of capacity fade mechanisms in NMC through hard X-ray probes, surface sensitive soft X-ray characterization, and isothermal microcalorimetry. A case study on the effect of charging potential on NMC811 over extended cycling is presented to illustrate the benefits of these approaches. The results showed that charging to 4.7 V leads to higher delivered capacity, but much greater fade as compared to charging to 4.3 V. Operando XRD and SEM results indicated that particle fracture from increased structural distortions at >4.3 V was a contributor to capacity fade. Operando hard XAS revealed significant Ni and Co redox during cycling as well as a Jahn-Teller distortion at the discharged state (Ni3+); however, minimal differences were observed between the cells charged to 4.3 and 4.7 V. Additional XAS analyses using soft X-rays revealed significant surface reconstruction after cycling to 4.7 V, revealing another contribution to fade. Operando isothermal microcalorimetry (IMC) indicated that the high voltage charge to 4.7 V resulted in a doubling of the heat dissipation when compared to charging to 4.3 V. A lowered chemical-to-electrical energy conversion efficiency due to thermal energy waste was observed, providing a complementary characterization of electrochemical degradation. The work demonstrates the utility of multi-modal X-ray and microcalorimetric approaches to understand the causes of capacity fade in lithium-ion batteries with Ni-rich NMC.

Core level spectroscopies locate hydrogen in the proton transfer pathway - identifying quasi-symmetrical hydrogen bonds in the solid state.

Short, strong hydrogen bonds (SSHBs) have been a source of interest and considerable speculation over recent years, culminating with those where hydrogen resides around the midpoint between the donor and acceptor atoms, leading to quasi-covalent nature. We demonstrate that X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy provide deep insight into the electronic structure of the short OHN hydrogen bond of 3,5-pyridinedicarboxylic acid, revealing for the first time distinctive spectroscopic identifiers for these quasi-symmetrical hydrogen bonds. An intermediate nitrogen (core level) chemical shift occurs for the almost centrally located hydrogen compared to protonated (ionic) and non-ionic analogues, and it reveals the absence of two-site disorder. This type of bonding is also evident through broadening of the nitrogen 1s photoemission and 1s → 1π* peaks in XPS and NEXAFS, respectively, arising from the femtosecond lifetimes of hydrogen in the potential wells slightly offset to either side of the centre. The line-shape of the core level excitations are thus related to the population occupancies, reflecting the temperature-dependent shape of the hydrogen potential energy well. Both XPS and NEXAFS provide a distinctive identifier for these quasi-symmetrical hydrogen bonds, paving the way for detailed studies into their prevalence and potentially unique physical and chemical properties.

In Situ Solid-State Reactions Monitored by X-ray Absorption Spectroscopy: Temperature-Induced Proton Transfer Leads to Chemical Shifts.

The dramatic colour and phase alteration with the solid-state, temperature-dependent reaction between squaric acid and 4,4'-bipyridine has been probed in situ with X-ray absorption spectroscopy. The electronic and chemical sensitivity to the local atomic environment through chemical shifts in the near-edge X-ray absorption fine structure (NEXAFS) revealed proton transfer from the acid to the bipyridine base through the change in nitrogen protonation state in the high-temperature form. Direct detection of proton transfer coupled with structural analysis elucidates the nature of the solid-state process, with intermolecular proton transfer occurring along an acid-base chain followed by a domino effect to the subsequent acid-base chains, leading to the rapid migration along the length of the crystal. NEXAFS thereby conveys the ability to monitor the nature of solid-state chemical reactions in situ, without the need for a priori information or long-range order.

Synthesis and Characterization of Aminopropyltriethoxysilane-Polydopamine Coatings.

Polydopamine coatings are of interest due to the fact that they can promote adhesion to a broad range of materials and can enable a variety of applications. However, the polydopamine-substrate interaction is often noncovalent. To broaden the potential applications of polydopamine, we show the incorporation of 3-aminopropyltriethoxysilane (APTES), a traditional coupling agent capable of covalent bonding to a broad range of organic and inorganic surfaces, into polydopamine coatings. High energy X-ray photoelectron spectroscopy (HE-XPS), conventional XPS, near-edge X-ray absorption fine structure (NEXAFS), Fourier transform infrared-attenuated total reflectance (FTIR-ATR), and ellipsometry measurements were used to investigate changes in coating chemistry and thickness, which suggest covalent incorporation of APTES into polydopamine. These coatings can be deposited either in Tris buffer or by using an aqueous APTES solution as a buffer without Tris. APTES-dopamine hydrochloride deposition from solutions with molar ratios between 0:1 and 10:1 allowed us to control the coating composition across a broad range.

Magnetic Field Landscapes Guiding the Chemisorption of Diamagnetic Molecules.

It is shown that the self-assembly of diamagnetic molecule submonolayers on a surface can be influenced by magnetic stray field landscapes emerging from artificially fabricated magnetic domains and domain walls. The directed local chemisorption of diamagnetic subphthalocyaninatoboron molecules in relation to the artificially created domain pattern is proved by a combination of surface analytical methods: ToF-SIMS, X-PEEM, and NEXAFS imaging. Thereby, a new method to influence self-assembly processes and to produce patterned submonolayers is presented.

Poly(sulfobetaine methacrylate)s as electrode modifiers for inverted organic electronics.

We demonstrate the use of poly(sulfobetaine methacrylate) (PSBMA), and its pyrene-containing copolymer, as solution-processable work function reducers for inverted organic electronic devices. A notable feature of PSBMA is its orthogonal solubility relative to solvents typically employed in the processing of organic semiconductors. A strong permanent dipole moment on the sulfobetaine moiety was calculated by density functional theory. PSBMA interlayers reduced the work function of metals, graphene, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) by over 1 eV, and an ultrathin interlayer of PSBMA reduced the electron injection barrier between indium tin oxide (ITO) and C70 by 0.67 eV. As a result, the performance of organic photovoltaic devices with PSBMA interlayers is significantly improved, and enhanced electron injection is demonstrated in electron-only devices with ITO, PEDOT:PSS, and graphene electrodes. This work makes available a new class of dipole-rich, counterion-free, pH insensitive polymer interlayers with demonstrated effectiveness in inverted devices.

Atomic Layer Deposition of Hafnium(IV) Oxide on Graphene Oxide: Probing Interfacial Chemistry and Nucleation by using X-ray Absorption and Photoelectron Spectroscopies.

Interfacing graphene with metal oxides is of considerable technological importance for modulating carrier density through electrostatic gating as well as for the design of earth-abundant electrocatalysts. Herein, we probe the early stages of the atomic layer deposition (ALD) of HfO2 on graphene oxide using a combination of C and O K-edge near-edge X-ray absorption fine structure spectroscopies and X-ray photoelectron spectroscopy. Dosing with water is observed to promote defunctionalization of graphene oxide as a result of the reaction between water and hydroxyl/epoxide species, which yields carbonyl groups that further react with migratory epoxide species to release CO2 . The carboxylates formed by the reaction of carbonyl and epoxide species facilitate binding of Hf precursors to graphene oxide surfaces. The ALD process is accompanied by recovery of the π-conjugated framework of graphene. The delineation of binding modes provides a means to rationally assemble 2D heterostructures.

Power, fatigue, and recovery changes in national collegiate athletic association division I hockey players across a competitive season.

This study aimed to evaluate changes in pre- to postseason power output, fatigue, and recovery during a repeated sprint test. Twenty National Collegiate Athletic Association Division I men's hockey athletes performed identical sessions of repeated sprint work pre- and postseason. The repeated sprint test consisted of 5 sets of 45 seconds of repeated sprint work with 90 seconds of rest in between each series of sprints. Power output (W), decrement, and recovery scores (RECs) were determined using raw data from a nonmotorized treadmill. Ratings of perceived exertion were recorded after, and perceived readiness (PR) recorded before, each series of sprints. Mean power was significantly higher in preseason vs. postseason performance during sprint 1 (760.6 vs. 691.3 W; p = 0.03), sprint 2 (719.9 vs 657.0 W; p = 0.05), sprint 4 (648.4 vs 588.9 W; p = 0.04), and sprint 5 (656.6 vs. 586.8 W, p = 0.04). Ratings of perceived exertion were significantly higher during sprints 3, 4, and 5 postseason with PR significantly higher (indicating less readiness) before sprints 3 and 4. There were no significant differences in REC or decrement score. Overall, athletes were unable to maintain power during subsequent repeated sprint work during postseason. The degree to which the athletes fatigued and recovered between sprints did not change between pre- and postseason testing, however, athletes exhibit increased perceptual strain during the repeated sprint work. These data indicate meaningful performance and perceptual differences throughout the competitive season in collegiate-level hockey players.

Multiplexed orientation and structure analysis by imaging near-edge X-ray absorption fine structure (MOSAIX) for combinatorial surface science.

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, as a technique, offers detailed information about the bonding environment of molecules at a surface. However, because it is a synchrotron based method, beam-time is limited and users must typically prioritize and narrowly define the scopes of experiments. In this study, we demonstrate a novel method that opens up the possibility of the use of large area NEXAFS imaging to pursue combinatorial studies. To explore the capabilities of the NIST full field NEXAFS microscope available at the National Synchrotron Light Source as a high throughput imaging instrument, we collected NEXAFS images from a sample array consisting of 144 different elements with a periodic sequence of different surface modifications. NEXAFS images collected from this model system illustrate how hyperspectral NEXAFS data can be used for parallel analysis of large numbers of samples either directly from the overall image or by extracting spectra from regions of interest.

Electrical and physical characterization of bilayer carboxylic acid-functionalized molecular layers.

We have used flip chip lamination (FCL) to form monolayer and bilayer molecular junctions of carboxylic acid-containing molecules with Cu atom incorporation. Carboxylic acid-terminated monolayers are self-assembled onto ultrasmooth Au by using thiol chemistry and grafted onto n-type Si. Prior to junction formation, monolayers are physically characterized by using polarized infrared absorption spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure spectroscopy, confirming the molecular quality and functional group termination. FCL was used to form monolayer junctions onto H-terminated Si or bilayer junctions of carboxylic acid monolayers on Au and Si. From the electrical measurements, we find that the current through the junction is attenuated as the effective molecular length within the junction increases, indicating that molecules are electrically active within the junction. We find that the electronic transport through the bilayer junction saturates at very thick effective distances possibly because of another electron-transport mechanism that is not nonresonant tunneling as a result of trapped defects or sequential tunneling. In addition, bilayer junctions are fabricated with and without Cu atoms, and we find that the electron transport is not distinguishably different when Cu atoms are within the bilayer.

Toggling Stereochemical Activity through Interstitial Positioning of Cations between 2D V2O5 Double Layers.

The 5/6s2 lone-pair electrons of p-block cations in their lower oxidation states are a versatile electronic and geometric structure motif that can underpin lattice anharmonicity and often engender electronic and structural instabilities that underpin the function of active elements in nonlinear optics, thermochromics, thermoelectrics, neuromorphic computing, and photocatalysis. In contrast to periodic solids where lone-pair-bearing cations are part of the structural framework, installing lone-pair-bearing cations in the interstitial sites of intercalation hosts provides a means of a systematically modulating electronic structure through the choice of the group and the period of the inserted cation while preserving the overall framework connectivity. The extent of stereochemical activity and the energy positioning of lone-pair-derived mid-gap states depend on the cation identity, stoichiometry, and strength of anion hybridization. V2O5 polymorphs are versatile insertion hosts that can accommodate a broad range of s-, p-, and d-block cations. However, the insertion of lone-pair-bearing cations remains largely underexplored. In this article, we examine the implications of varying the 6s2 cations situated in interlayer sites between condensed [V4O10]n double layers. Systematic modulations of lattice distortions, electronic structure, and magnetic ordering are observed with increasing strength of stereochemical activity from group 12 to group 14 cations. We compare and contrast p-block-layered MxV2O5 (M = Hg, Tl, and Pb) compounds and map the significance of local off-centering arising from the stereochemical activity of lone-pair cations to the emergence of filled antibonding lone-pair 6s2-O 2p-hybridized mid-gap states mediated by second-order Jahn-Teller distortions. Crystallographic studies of cation coordination environments and the resulting modulation of V-V interactions have been used in conjunction with variable-energy hard X-ray photoelectron spectroscopy measurements, first-principles electronic structure calculations, and crystal orbital Hamilton population analyses to decipher the origins of stereochemical activity. Magnetic susceptibility measurements reveal antiferromagnetic signatures for all the three compounds. However, the differences in V-V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 160 and 260 K for Hg0.5V2O5 and δ-Tl0.5V2O5, respectively, as compared to 7 K for δ-Pb0.5V2O5. In δ-Pb0.5V2O5, the strong stereochemical activity of electron lone pairs and the resulting electrostatic repulsions enforce superlattice ordering, which strongly modifies the electronic localization patterns along the [V4O10] slabs, resulting in disrupted magnetic ordering and an anomalously low ordering temperature. The results demonstrate a versatile strategy for toggling the stereochemical activity of electron lone pairs to modify the electronic structure near the Fermi level and to mediate superexchange interactions.

Direct observation of phenylalanine orientations in statherin bound to hydroxyapatite surfaces.

Extracellular biomineralization proteins such as salivary statherin control the growth of hydroxyapatite (HAP), the principal component of teeth and bones. Despite the important role that statherin plays in the regulation of hard tissue formation in humans, the surface recognition mechanisms involved are poorly understood. The protein-surface interaction likely involves very specific contacts between the surface atoms and the key protein side chains. This study demonstrates for the first time the power of combining near-edge X-ray absorption fine structure (NEXAFS) spectroscopy with element labeling to quantify the orientation of individual side chains. In this work, the 15 amino acid N-terminal binding domain of statherin has been adsorbed onto HAP surfaces, and the orientations of phenylalanine rings F7 and F14 have been determined using NEXAFS analysis and fluorine labels at individual phenylalanine sites. The NEXAFS-derived phenylalanine tilt angles have been verified with sum frequency generation spectroscopy.

Surface orientation of polystyrene based polymers: steric effects from pendant groups on the phenyl ring.

Near edge X-ray absorption fine structure (NEXAFS) coupled with molecular dynamics simulations were utilized to probe the orientation at the exposed surface of the polymer film for polystyrene type polymers with various pendant functional groups off the phenyl ring. For all the polymers, the surface was oriented so that the rings are nominally normal to the film surface and pointing outward from the surface. The magnitude of this orientation was small and dependent on the size of the pendant functional group. Bulky functional groups hindered the surface orientation, leading to nearly unoriented surfaces. Depth dependent NEXAFS measurements demonstrated that the surface orientation was localized near the interface. Molecular dynamics simulations showed that the phenyl rings were not oriented strongly around a particular "average tilt angle". In contrast, simulations demonstrate that the phenyl rings exhibit a broad distribution of tilt angles, and that changes in the tilt angle distribution with pendant functionality give rise to the observed NEXAFS response. The more oriented samples exhibit a higher probability of phenyl ring orientation at angles greater than 60 degrees relative to the plane of the films surface.

Manipulation of interfacial amine density in epoxy-amine systems as studied by near-edge X-ray absorption fine structure (NEXAFS).

In this work, we investigate the ability to tune the quantity of surface amine functional groups in the interfacial region of epoxy-diamine composites using NEXAFS, a technique that is extremely sensitive to surface composition. Thereby, we employ a model surface (silicon wafer with the native oxide present) and, after deposition of an epoxy functionalized silane, we immersed the wafers in various diamines, followed by reaction with a diepoxy acting as a molecular probe. These results show that the number of available surface amines depends on the diamine chosen, wherein smaller molecular weight diamines provide more reaction sites. Subsequent experiments with mixtures of diamines undergoing competitive adsorption show that the amine quantity can be tailored by choice of the diamine mixture. Further experiments of diamine treated 3-(glycidoxypropyl) trimethoxysilane layers in a reacting epoxy/diamine showed that the surface reaction site density differences observed for adsorption experiments persisted in the reacting epoxy, implying that the surface reaction rate (and by extension, the surface amine concentration) dictate interfacial cross-link density up to the point of gelation.

Structure of Keratins in Adhesive Gecko Setae Determined by Near-Edge X-ray Absorption Fine Structure Spectromicroscopy.

Geckos have the astonishing ability to climb on vertical surfaces due to the adhesive properties of fibrous setae at the tips of their toe pads. While the adhesion mechanism principle, based on van der Waals interactions of myriads of spatula located at the outermost end of the setal arrays, has been studied extensively, there are still open questions about the chemistry of gecko setae. The gecko adhesive system is based on keratin fibrils assembled to support the entire setal structure. At the same time, the structure and alignment of keratin molecules within the ultrafine spatula tissue, which can support the enormous mechanical strain, still remain unknown. We have studied the molecular structure of gecko spatula using near-edge X-ray absorption fine structure (NEXAFS) imaging. We indeed found that the setae consist of a ß-sheet structure aligned with the adhesion direction of the setae. Such alignment may provide mechanical stability to the setae and resistance to wear across different length scales.

Carbon-free high-performance cathode for solid-state Li-O2 battery.

The development of a cathode for solid-state lithium-oxygen batteries has been hindered in practice by a low capacity and limited cycle life despite their potential for high energy density. Here, a previously unexplored strategy is proposed wherein the cathode delivers a specific capacity of 200 milliampere hour per gram over 665 discharge/charge cycles, while existing cathodes achieve only ~50 milliampere hour per gram and ~100 cycles. A highly conductive ruthenium-based composite is designed as a carbon-free cathode by first-principles calculations to avoid the degradation associated with carbonaceous materials, implying an improvement in stability during the electrochemical cycling. In addition, water vapor is added into the main oxygen gas as an additive to change the discharge product from growth-restricted lithium peroxide to easily grown lithium hydroxide, resulting in a notable increase in capacity. Thus, the proposed strategy is effective for developing reversible solid-state lithium-oxygen batteries with high energy density.

Molecular packing of high-mobility diketo pyrrolo-pyrrole polymer semiconductors with branched alkyl side chains.

We describe a series of highly soluble diketo pyrrolo-pyrrole (DPP)-bithiophene copolymers exhibiting field effect hole mobilities up to 0.74 cm(2) V(-1) s(-1), with a common synthetic motif of bulky 2-octyldodecyl side groups on the conjugated backbone. Spectroscopy, diffraction, and microscopy measurements reveal a transition in molecular packing behavior from a preferentially edge-on orientation of the conjugated plane to a preferentially face-on orientation as the attachment density of the side chains increases. Thermal annealing generally reduces both the face-on population and the misoriented edge-on domains. The highest hole mobilities of this series were obtained from edge-on molecular packing and in-plane liquid-crystalline texture, but films with a bimodal orientation distribution and no discernible in-plane texture exhibited surprisingly comparable mobilities. The high hole mobility may therefore arise from the molecular packing feature common to the entire polymer series: backbones that are strictly oriented parallel to the substrate plane and coplanar with other backbones in the same layer.