A 70-Year-Old Mystery in Technetium Chemistry Explained by the New Technetium Polyoxometalate [H7 O3 ]4 [Tc20 O68 ] ⋠4H2 O.

[H7 O3 ]4 [Tc20 O68 ] ⋅ 4H2 O [1] was prepared from an aqueous Tc2 O7 solution concentrated over anhydrous H2 SO4 . [Tc20 O68 ]4- is the first polyanionic species to be reported for Tc. The unit cell contains one centrosymmetric [Tc20 O68 ]4- polyanion as well as hydronium ions and water molecules. The core of the structure consists of four Tc(V)O6 octahedra that form a square Tc4 O4 ring. The four Tc(V)O6 octahedra are decorated by sixteen Tc(VII)O4 tetrahedra. Calculations show the bonding within the Tc4 O4 ring to consist of a 3-center bond formed between each neighboring pair of Tc atoms and their bridging oxygen. Calculations also indicate that a strong d→d electronic transition at 513 nm is the origin of the red color of [1]. The characterization of red HTcO4 solutions by X-ray absorption spectroscopy has complemented the description of this compound in aqueous solution. The formation mechanisms in solution, including the possible role of technetium's radioactivity in the formation of [1], are discussed.

An Atomistic Understanding of the Unusual Thermal Behavior of the Molecular Oxide Tc2O7.

The thermal behavior of Tc2O7 has been investigated by single-crystal X-ray diffraction of the solid state over a range of 80-280 K and by ab initio molecular dynamics (MD) simulations. The thermal expansion coefficient of the solid was experimentally determined to be 189 × 10-6 Å3 K-1 at 280 K. The simulations accurately reproduce the experimentally determined crystal structures and thermal expansion within a few percent. The experimental melting point and vapor pressure for Tc2O7 are unusually high and low, respectively, in comparison to similar molecular solids. Through investigating the structure and the motion of the solid across a range of temperatures, we provide insights into the thermal behavior of Tc2O7.

Hydrogen Uptake on Coordinatively Unsaturated Metal Sites in VSB-5: Strong Binding Affinity Leading to High-Temperature D2/H2 Selectivity.

We examine the adsorption of hydrogen and deuterium into the nanoporous nickel phosphate, VSB-5. On the basis of gas sorption analysis, VSB-5 exhibits one of the highest measured H2 heats of adsorption (HOA) for hydrogen (16 kJ/mol) yet reported. This high HOA is consistent with an unusually large red shift in the Q(1) and Q(0) hydrogen vibrational modes as measured with in situ infrared spectroscopy. The HOA for D2 is measured to be 2 kJ/mol higher than that for H2. "Ideal adsorbed solution theory" analysis of H2 and D2 isotherms provides selectivities above 4 for deuterium at 140 K, suggesting that VSB-5 is a promising adsorbent for pressure-swing adsorption-type separations of hydrogen isotopes.

Molecular and Electronic Structures of M2O7 (M = Mn, Tc, Re).

The molecular and electronic structures of the group 7 heptoxides were investigated by computational methods as both isolated molecules and in the solid-state. The metal-oxygen-metal bending angle of the single molecule increased with increasing atomic number, with Re2O7 preferring a linear structure. Natural bond orbital and localized orbital bonding analyses indicate that there is a three-center covalent bond between the metal atoms and the bridging oxygen, and the increasing ionic character of the bonds favors larger bond angles. The calculations accurately reproduce the experimental crystal structures within a few percent. Analysis of the band structures and density of states shows similar bonding for all of the solid-state heptoxides, including the presence of the three-center covalent bond. DFT+U simulations show that PBE-D3 underpredicts the band gap by ∼0.2 eV due to an undercorrelation of the metal d conducting states. Homologue and compression studies show that Re2O7 adopts a polymeric structure because the Re-oxide tetrahedra are easily distorted by packing stresses to form additional three-center covalent bonds.

Utility of Bifunctional N-Heterocyclic Phosphine (NHP)-Thioureas for Metal-Free Carbon-Phosphorus Bond Construction toward Regio- and Stereoselective Formation of Vinylphosphonates.

An efficient and practical protocol for completely regioselective and highly stereoselective synthesis of vinyldiazaphosphonates from N-heterocyclic phosphine (NHP) and allenes via phospha-Michael/intramolecular nucleophilic substitution reaction has been developed. This transformation enabled the synthesis of valuable densely functionalized vinyldiazaphosphonates with a ß-, γ-unsaturated ester moiety under mild reaction conditions. Synthetic utility of vinyldiazaphosphonates was demonstrated by a series of synthetic manipulations.

Molecular and Electronic Structure of Re2Br4(PMe3)4.

The dinuclear rhenium(II) complex Re2Br4(PMe3)4 was prepared from the reduction of [Re2Br8](2-) with (n-Bu4N)BH4 in the presence of PMe3 in propanol. The complex was characterized by single-crystal X-ray diffraction (SCXRD) and UV-visible spectroscopy. It crystallizes in the monoclinic C2/c space group and is isostructural with its molybdenum and technetium analogues. The Re-Re distance (2.2521(3) Å) is slightly longer than the one in Re2Cl4(PMe3)4 (2.247(1) Å). The molecular and electronic structure of Re2X4(PMe3)4 (X = Cl, Br) were studied by multiconfigurational quantum chemical methods. The computed ground-state geometry is in excellent agreement with the experimental structure determined by SCXRD. The calculated total bond order (2.75) is consistent with the presence of an electron-rich triple bond and is similar to the one found for Re2Cl4(PMe3)4. The electronic absorption spectrum of Re2Br4(PMe3)4 was recorded in benzene and shows a series of low-intensity bands in the range 10 000-26 000 cm(-1). The absorption bands were assigned based on calculations of the excitation energies with the multireference wave functions followed by second-order perturbation theory using the CASSCF/CASPT2 method. Calculations predict that the lowest energy band corresponds to the δ* → σ* transition, while the next higher energy bands were attributed to the δ* → π*, δ → σ*, and δ → π* transitions.

Ditechnetium Heptoxide Revisited: Solid-State, Gas-Phase, and Theoretical Studies.

Ditechnetium heptoxide was synthesized from the oxidation of TcO2 with O2 at 450 °C and characterized by single-crystal X-ray diffraction, electron-impact mass spectrometry (EI-MS), and theoretical methods. Refinement of the structure at 100 K indicates that Tc2O7 crystallizes as a molecular solid in the orthorhombic space group Pbca [a = 7.312(3) Å, b = 5.562(2) Å, c = 13.707(5) Å, and V = 557.5(3) Å3]. The Tc2O7 molecule can be described as corner-sharing TcO4 tetrahedron [Tc---Tc = 3.698(1) Å and Tc-OBri-Tc = 180.0°]. The EI-MS spectrum of Tc2O7 consists of both mononuclear and dinuclear species. The main dinuclear species in the gas-phase are Tc2O7 (100%) and Tc2O5 (56%), while the main mononuclear species are TcO3 (33.9%) and TcO2 (42.8%). The difference in the relative intensities of the M2O5 (M = Tc, Re) fragments (1.7% for Re) indicates that these group 7 elements exhibit different gas-phase chemistry. The solid-state structure of Tc2O7 was investigated by density functional theory methods. The optimized structure of the Tc2O7 molecule is in good agreement with the experimental one. Simulations indicate that the more favorable geometry for the Tc2O7 molecule in the gas-phase is bent (Tc-OBri-Tc = 156.5°), while a linear geometry (Tc-OBri-Tc = 180.0°) is favored in the solid-state.

On the importance of a precise crystal structure for simulating gas adsorption in nanoporous materials.

We show that simulation of gas adsorption in nanoporous sorbents may be highly sensitive to accurate crystallographic coordinates, even for frameworks anticipated to have low flexibility.

Side group dependent room temperature crystallization-induced phosphorescence of benzil based all organic phosphors.

In this work, we report alkoxy substituted benzil based all organic room temperature phosphors which showed crystallization induced phosphorescence (CIP). Nine title compounds were prepared with various alkyl lengths (OCnH2n+1: n = 8-16) and the effect of alkyl side group length on the phosphorescence performance was investigated, as compared to p-anisil. It was found that both phosphorescence quantum yield and lifetime increased concomitantly as the alkyl length increased up to nonyloxy (BZL-OC9). Further increase in the carbon number caused the phosphorescence performance to deteriorate due to greater conformational freedom of the side groups. An incredible quantum yield of 70% was achieved for BZL-OC9. A promising finding is that the increased quantum yield was accompanied by the increase in the lifetime relative to p-anisil, which has been historically challenging. Single crystallography coupled with UV-Vis spectroscopy revealed that a higher level of intermolecular π-π interactions was observed from p-anisil while more alkyl interactions with less intermolecular π-orbital overlap were found for BZL-OC8. As a result, molecular rigidification with less phosphorescence quenching was achieved for BZL-OC8 leading to enhanced performance. A precipitation study on a dichloromethane solution as a function of the content of MeOH (poor solvent) proved that the emission of the BZL-OCn system is truly aggregation-induced. The current work demonstrates that strategic side group engineering could be a promising approach to developing high-performance all organic phosphors as well as improving the properties of existing phosphors.

ß-Technetium dichloride: solid-state modulated structure, electronic structure, and physical properties.

A second polymorph of technetium dichloride, ß-TcCl2, has been synthesized from the reaction of Tc metal and chlorine in a sealed tube at 450 °C. The crystallographic structure and physical properties of ß-TcCl2 have been investigated. The structure of ß-TcCl2 consists of infinite chains of face sharing [Tc2Cl8] units; within a chain, the Tc≡Tc vectors of two adjacent [Tc2Cl8] units are ordered in the long-range where perpendicular and/or parallel arrangement of Tc≡Tc vectors yields a modulated structure. Resistivity and Seebeck measurements performed on a ß-TcCl2 single crystal indicate the compound to be a p-type semiconductor while a magnetic susceptibility measurement shows technetium dichloride to be diamagnetic. A band gap of 0.12(2) eV was determined by reflectance spectroscopy measurements. Theoretical calculations at the density functional level were utilized for the investigation of other possible stable forms of TcCl2.

Trivalent actinide and lanthanide complexation of 5,6-dialkyl-2,6-bis(1,2,4-triazin-3-yl)pyridine (RBTP; R = H, Me, Et) derivatives: a combined experimental and first-principles study.

Complexations of lanthanide ions with 5,6-dialkyl-2,6-bis(1,2,4-triazin-3-yl)pyridine [RBTP; R = H (HBTP), methyl (MeBTP), ethyl (EtBTP)] derivatives have been studied in the acetonitrile medium by electrospray ionization mass spectrometry, time-resolved laser-induced fluorescence spectroscopy, and UV-vis spectrophotometric titration. These studies were carried out in the absence and presence of a nitrate ion in order to understand the effect of the nitrate ion on their complexation behavior, particularly in the poor solvating acetonitrile medium where strong nitrate complexation of hard lanthanide ions is expected. Consistent results from all three techniques undoubtedly show the formation of lower stoichiometric complexes in the presence of excess nitrate ion. This kind of nitrate ion effect on the speciation of Ln(3+) complexes of RBTP ligands has not so far been reported in the literature. Different Am(3+) and Ln(3+) complexes were observed with RBTP ligands in the presence of 0.01 M tetramethylammonium nitrate, and their stability constant values are determined using UV-vis spectrophotometric titrations. The formation of higher stoichiometric complexes and higher stability constants for Am(3+) compared to Ln(3+) ions indicates the selectivity of these classes of ligands. A single-crystal X-ray diffraction (XRD) study of europium(III) complexes shows the formation of a dimeric complex with HBTP and a monomeric complex with EtBTP, whereas MeBTP forms both the dimeric and monomeric complexes. Density functional theory calculations confirm the findings from single-crystal XRD and also predict the structures of Eu(3+) and Am(3+) complexes observed experimentally.

A trigonal-prismatic hexanuclear technetium(II) bromide cluster: solid-state synthesis and crystallographic and electronic structure.

The compound Na{[Tc6Br12]2Br} has been obtained from the decomposition of TcBr4 under vacuum in a Pyrex ampule at 450 °C. The stoichiometry of the compound has been confirmed by energy-dispersive X-ray spectroscopy and its structure determined by single-crystal X-ray diffraction. The compound contains a trigonal-prismatic hexanuclear [Tc6Br12] cluster. The cluster is composed of two triangular Tc3Br6 units linked by multiple Tc-Tc bonds. In the Tc3Br6 unit, the average Tc-Tc distance [2.6845(5) Å] is characteristic of Tc-Tc single bonds, while the average Tc-Tc distance between the two triangular units [2.1735(5) Å] is characteristic of Tc≡Tc triple bonds. The electronic structure of the [Tc6Br12] cluster was studied by first-principles calculations, which confirm the presence of single and triple Tc-Tc bonds in the cluster.

Synthetic and coordination chemistry of the heavier trivalent technetium binary halides: uncovering technetium triiodide.

Technetium tribromide and triiodide were obtained from the reaction of the quadruply Tc-Tc-bonded dimer Tc2(O2CCH3)4Cl2 with flowing HX(g) (X = Br, I) at elevated temperatures. At 150 and 300 °C, the reaction with HBr(g) yields TcBr3 crystallizing with the TiI3 structure type. The analogous reactions with flowing HI(g) yield TcI3, the first technetium binary iodide to be reported. Powder X-ray diffraction (PXRD) measurements show the compound to be amorphous at 150 °C and semicrystalline at 300 °C. X-ray absorption fine structure spectroscopy indicates TcI3 to consist of face-sharing TcI6 octahedra. Reactions of technetium metal with elemental iodine in a sealed Pyrex ampules in the temperature range 250-400 °C were performed. At 250 °C, no reaction occurred, while the reaction at 400 °C yielded a product whose PXRD pattern matches the one of TcI3 obtained from the reaction of Tc2(O2CCH3)4Cl2 and flowing HI(g). The thermal stability of TcBr3 and TcI3 was investigated in Pyrex and/or quartz ampules at 450 °C under vacuum. Technetium tribromide decomposes to Na{[Tc6Br12]2Br} in a Pyrex ampule and to technetium metal in a quartz ampule; technetium triiodide decomposes to technetium metal in a Pyrex ampule.

Probing the presence of multiple metal-metal bonds in technetium chlorides by X-ray absorption spectroscopy: implications for synthetic chemistry.

The cesium salts of [Tc(2)X(8)](3-) (X = Cl, Br), the reduction product of (n-Bu(4)N)[TcOCl(4)] with (n-Bu(4)N)BH(4) in THF, and the product obtained from reaction of Tc(2)(O(2)CCH(3))(4)Cl(2) with HCl(g) at 300 °C have been characterized by extended X-ray absorption fine structure (EXAFS) spectroscopy. For the [Tc(2)X(8)](3-) anions, the Tc-Tc separations found by EXAFS spectroscopy (2.12(2) Å for both X = Cl and Br) are in excellent agreement with those found by single-crystal X-ray diffraction (SCXRD) measurements (2.117[4] Å for X = Cl and 2.1265(1) Å for X = Br). The Tc-Tc separation found by EXAFS in these anions is slightly shorter than those found in the [Tc(2)X(8)](2-) anions (2.16(2) Å for X = Cl and Br). Spectroscopic and SCXRD characterization of the reduction product of (n-Bu(4)N)[TcOCl(4)] with (n-Bu(4)N)BH(4) are consistent with the presence of dinuclear species that are related to the [Tc(2)Cl(8)](n-) (n = 2, 3) anions. From these results, a new preparation of (n-Bu(4)N)(2)[Tc(2)Cl(8)] was developed. Finally, EXAFS characterization of the product obtained from reaction of Tc(2)(O(2)CCH(3))(4)Cl(2) with HCl(g) at 300 °C indicates the presence of amorphous α-TcCl(3). The Tc-Tc separation (i.e., 2.46(2) Å) measured in this compound is consistent with the presence of Tc═Tc double bonds in the [Tc(3)](9+) core.

ß-Technetium trichloride: formation, structure, and first-principles calculations.

A second polymorph of technetium trichloride, ß-TcCl(3), has been identified from the reaction between Tc metal and Cl(2) gas. The structure of ß-TcCl(3) consists of infinite layers of edge-sharing octahedra, similar to its MoCl(3) and RuCl(3) analogues. The Tc-Tc distance [2.861(3) Å] between adjacent octahedra is indicative of metal-metal bonding. Earlier theoretical work predicted that ß-TcCl(3) is less stable than α-TcCl(3). In agreement with the prediction, ß-TcCl(3) slowly transforms into α-TcCl(3) (Tc(3)Cl(9)) over 16 days at 280 °C.

Technetium tetrachloride revisited: a precursor to lower-valent binary technetium chlorides.

Technetium tetrachloride has been prepared from the reaction of technetium metal with excess chlorine in sealed Pyrex ampules at elevated temperatures. The product was characterized by single-crystal and powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and alternating-current magnetic susceptibility. Solid TcCl(4) behaves as a simple paramagnet from room temperature down to 50 K with µ(eff) = 3.76 µ(B). Below 25 K, TcCl(4) exhibits an antiferromagnetic transition with a Néel temperature (T(N)) of ∼24 K. The thermal behavior of TcCl(4) was investigated under vacuum at 450 °C; the compound decomposes stepwise to α-TcCl(3) and TcCl(2).

Investigating H2 Adsorption in Isostructural Metal-Organic Frameworks M-CUK-1 (M = Co and Mg) through Experimental and Theoretical Studies.

A combined experimental and theoretical study of H2 adsorption was carried out in Co-CUK-1 and Mg-CUK-1, two isostructural metal-organic frameworks (MOFs) that consist of M2+ ions (M = Co and Mg) coordinated to pyridine-2,4-dicarboxylate (pdc2-) and OH- ligands. These MOFs possess saturated metal centers in distorted octahedral environments and narrow pore sizes and display high chemical and thermal stability. Previous experimental studies revealed that Co-CUK-1 exhibits a H2 uptake of 183 cm3 g-1 at 77 K/1.0 atm [ Angew. Chem., Int. Ed. 2007, 46, 272-275, DOI: 10.1002/anie.200601627], while that for Mg-CUK-1 under the same conditions is 240 cm3 g-1 on the basis of the experimental measurements carried out herein. The theoretical H2 adsorption isotherms are in close agreement with the corresponding experimental measurements for simulations using electrostatic and polarizable potentials of the adsorbate. Through simulated annealing calculations, it was found that the primary binding site for H2 in both isostructural analogues is localized proximal to the center of the aromatic rings belonging to the pdc2- linkers. Inelastic neutron scattering (INS) spectroscopic studies of H2 adsorbed in both MOFs revealed a rotational tunnelling transition occurring at around 8 meV in the corresponding spectra; this peak represents H2 adsorbed at the primary binding site. Two-dimensional quantum rotation calculations for H2 localized at the primary and secondary binding sites in both MOFs yielded rotational energy levels that are in agreement with the transitions observed in the INS spectra. Even though both M-CUK-1 analogues possess different metal ions, they exhibit similar electrostatic environments, modeled structures at H2 saturation, and rotational potentials for H2 adsorbed at the most favorable adsorption site. Overall, this study demonstrates how important molecular-level details of the H2 adsorption mechanism inside MOF micropores can be derived from a combination of experimental measurements and theoretical calculations using two stable and isostructural MOFs with saturated metal centers and small pore windows as model systems.

Technetium dichloride: a new binary halide containing metal-metal multiple bonds.

Technetium dichloride has been discovered. It was synthesized from the elements and characterized by several physical techniques, including single crystal X-ray diffraction. In the solid state, technetium dichloride exhibits a new structure type consisting of infinite chains of face sharing [Tc(2)Cl(8)] rectangular prisms that are packed in a commensurate supercell. The metal-metal separation in the prisms is 2.127(2) Å, a distance consistent with the presence of a Tc≡Tc triple bond that is also supported by electronic structure calculations.

Self-assembly of pyrazine-containing tetrachloroacenes.

In this paper, we report self-assembly of tetrachloroacenes containing pyrazine moieties. The title compounds, phenazine and bisphenazine substituted with four chlorine atoms for increased electron deficiency and alkyloxy side groups for solubility, demonstrated excellent gelation ability in select organic solvents. The assembled structure of these two series of compounds exhibited a morphological difference. Tetrachlorophenazine containing hexadecyloxy side groups induced rigid microbelts, while more extensive entanglement of thinner, more flexible fibers was observed from tetrachlorobisphenazine compounds, characterized by scanning electron microscopy. Tetrachlorophenazine and tetrachlorobisphenazine gels showed quite different emission behavior compared to their solution state. A strong, red-shifted emission compared to that of its diluted solution state was observed from the gel of tetrachlorophenazine. We have ascertained this is a result of J-aggregate formation. From the crystal structure of a model compound, it was found that tetrachlorophenazine cores adopt π-π stacking with a short stacking distance of 3.38 Å, enabling significant intermolecular π-orbital overlap. In addition, the π-cores were displaced longitudinally, indicative of J-aggregate formation. Surprisingly, the gel of tetrachlorobisphenazine showed fluorescence comparable to that of its dilute solution, suggesting that such a close packing of the π-cores may not be possible due to the bulky tert-butyl substituents.

Ionothermal synthesis and magnetic studies of novel two-dimensional metal-formate frameworks.

Five novel two-dimensional frameworks containing formate-bridged metal-centered octahedra are synthesized ionothermally from two ionic liquids previously unused as solvents in hybrid synthesis, 2-hydroxyethylammonium (HEA) formate, and 1-hydroxy-3-proplyammonium (HPA) formate. Templating effects of the cation from each ionic liquid drive the formation of different structures. [NH(3)C(2)H(4)OH](2)[M(CHO(2))(4)] (1: M = Co, 2: M = Ni) exhibit the same stoichiometry and connectivity as their manganese analogue (3: M = Mn), but the manganese form exhibits a different topology from 1 and 2. [NH(3)C(3)H(6)OH][M(CHO(2))(3)(H(2)O)] (4: M = Co, 5: M = Mn) were synthesized using the HPA formate ionic liquid with a metal-formate connectivity related to those of 1-3. Canted antiferromagnetic ordering occurs at low temperatures (1: T(N) = 7.0 K, 2: T(N) = 4.6 K, 3: T(N) = 8.0 K, 4: T(N) = 7.0 K, 5: T(N) = 9.2 K), similar to the magnetic properties previously reported for other metal-formate hybrid materials.