Removal of dyes by immobilization of Trametes versicolor in a solid-state micro-fermentation system.

A novel bioreactor system (low cost and easily scaled-up) is presented for dye decolorization applying filamentous fungi. In this two-phase bioreactor, dyes were decolorized at 28°C in a first phase by immobilized fungi in spherical cartridges prepared with a high-density plastic polyethylene mesh and filled with wheat bran as substrate for growth. In a second phase the capacity of the ligninolytic enzymes (laccase and Mn-peroxidase) present in the extracellular extracts from the solid residues was exploited for decolorization at 50°C. Each sphere behaved as a small-scale bioreactor for cell-culture. This system allowed the decoupling of growth (sterile condition) and decolorization (non-sterile condition) stages. The ability to decolorize the azo dye xylidine and the triphenylmethane Malachite Green by two Argentinean strains of Trametes versicolor was evaluated. The highest decolorization rates were displayed by T. versicolor BAFC 2234. When both dyes were applied together in the bioreactor, after a first phase (100min) 73.5% of Malachite Green and 40% of xylidine decolorization was attained, while at the end of the second phase (240min) a 97% and 52% decolorization was observed. Laccase activity was detected in the decolorized solution, but no Mn-peroxidase activity. The easy change of the cartridges allows the continuous use of the bioreactor in the non-sterile decolorization of dye-containing effluents.

Long time exposure digital in-line holography for 3-D particle trajectography.

One advantage of digital in-line holography is the ability for a user to know the 3-D location of a moving particle recorded at a given time. When the time exposure is much larger than the time required for grabbing the particle image at a given location, the diffraction pattern is spread along the trajectory of this particle. This can be seen as a convolution between the diffraction pattern and a blurring function resulting from the motion of the particle during the camera exposure. This article shows that the reconstruction of holograms recorded under such conditions exhibit traces that could be processed for extracting 3D trajectories.