RESUMO
The spin-orbit interaction in spin qubits enables spin-flip transitions, resulting in Rabi oscillations when an external microwave field is resonant with the qubit frequency. Here, we introduce an alternative driving mechanism mediated by the strong spin-orbit interactions in hole spin qubits, where a far-detuned oscillating field couples to the qubit phase. Phase-driving at radio frequencies, orders of magnitude slower than the microwave qubit frequency, induces highly nontrivial spin dynamics, violating the Rabi resonance condition. By using a qubit integrated in a silicon fin field-effect transistor, we demonstrate a controllable suppression of resonant Rabi oscillations and their revivals at tunable sidebands. These sidebands enable alternative qubit control schemes using global fields and local far-detuned pulses, facilitating the design of dense large-scale qubit architectures with local qubit addressability. Phase-driving also decouples Rabi oscillations from noise, an effect due to a gapped Floquet spectrum and can enable Floquet engineering high-fidelity gates in future quantum processors.
RESUMO
PbTe is a semiconductor with promising properties for topological quantum computing applications. Here, we characterize electron quantum dots in PbTe nanowires selectively grown on InP. Charge stability diagrams at zero magnetic field reveal large even-odd spacing between Coulomb blockade peaks, charging energies below 140 µeV and Kondo peaks in odd Coulomb diamonds. We attribute the large even-odd spacing to the large dielectric constant and small effective electron mass of PbTe. By studying the Zeeman-induced level and Kondo splitting in finite magnetic fields, we extract the electron g-factor as a function of magnetic field direction. We find the g-factor tensor to be highly anisotropic with principal g-factors ranging from 0.9 to 22.4 and to depend on the electronic configuration of the devices. These results indicate strong Rashba spin-orbit interaction in our PbTe quantum dots.
RESUMO
PURPOSE: This study aimed to analyze our data on delayed graft function (DGF) and to identify associated factors. METHODS: This is a retrospective case-control study of all patients transplanted in our center over a period of 11 years (January 1, 2003, to December 31, 2014) comparing patients with immediate graft function (n = 332) to those with DGF (n = 165). DGF was defined as the need for hemodialysis within the first 7 days after transplantation. Donor and recipient characteristics as well as procedural factors were compared by univariate and multivariate logistic regression analyses. RESULTS: Overall, 33% of patients had DGF. The rate of DGF declined from 2003 to 2011. In cases with DGF, donors and recipients were significantly older (p = 0.004 and p = 0.005, respectively), had longer cold ischemia times (p = 0.039), more revision surgeries (p < 0.001), and more HLA mismatches (p = 0.001), especially in the DR locus (p = 0.002). Neither donor nor recipient gender, waiting time, nor CMV status had any influence. In multivariable analysis, significant risk factors were ischemia time and mismatches at the HLA-DR loci. CONCLUSIONS: DGF is a common complication in renal transplantation which occurred in 33% of our cases. Important factors identified were donor and recipient age, ischemia time, HLA mismatching, and revision surgery.
Assuntos
Transplante de Rim , Estudos de Casos e Controles , Função Retardada do Enxerto/etiologia , Rejeição de Enxerto , Sobrevivência de Enxerto , Humanos , Isquemia/etiologia , Transplante de Rim/efeitos adversos , Estudos Retrospectivos , Fatores de Risco , Doadores de TecidosRESUMO
Controlled atomic scale fabrication based on scanning probe patterning or surface assembly typically involves a complex process flow, stringent requirements for an ultra-high vacuum environment, long fabrication times and, consequently, limited throughput and device yield. We demonstrate a device platform that overcomes these limitations by integrating scanning-probe based dopant device fabrication with a CMOS-compatible process flow. Silicon on insulator substrates are used featuring a reconstructed Si(001):H surface that is protected by a capping chip and has pre-implanted contacts ready for scanning tunneling microscope (STM) patterning. Processing in ultra-high vacuum is thereby reduced to a few critical steps. Subsequent reintegration of the samples into the CMOS process flow opens the door to successful application of STM fabricated dopant devices in more complex device architectures. Full functionality of this approach is demonstrated with magnetotransport measurements on degenerately doped STM patterned Si:P nanowires up to room temperature.
RESUMO
We present a scalable hybrid architecture for the 2D surface code combining superconducting resonators and hole-spin qubits in nanowires with tunable direct Rashba spin-orbit coupling. The backbone of this architecture is a square lattice of capacitively coupled coplanar waveguide resonators each of which hosts a nanowire hole-spin qubit. Both the frequency of the qubits and their coupling to the microwave field are tunable by a static electric field applied via the resonator center pin. In the dispersive regime, an entangling two-qubit gate can be realized via a third order process, whereby a virtual photon in one resonator is created by a first qubit, coherently transferred to a neighboring resonator, and absorbed by a second qubit in that resonator. Numerical simulations with state-of-the-art coherence times yield gate fidelities approaching the 99% fault tolerance threshold.
RESUMO
Hole spins have gained considerable interest in the past few years due to their potential for fast electrically controlled qubits. Here, we study holes confined in Ge hut wires, a so-far unexplored type of nanostructure. Low-temperature magnetotransport measurements reveal a large anisotropy between the in-plane and out-of-plane g-factors of up to 18. Numerical simulations verify that this large anisotropy originates from a confined wave function of heavy-hole character. A light-hole admixture of less than 1% is estimated for the states of lowest energy, leading to a surprisingly large reduction of the out-of-plane g-factors compared with those for pure heavy holes. Given this tiny light-hole contribution, the spin lifetimes are expected to be very long, even in isotopically nonpurified samples.
RESUMO
Hole spins in Ge/SiGe heterostructures have emerged as an interesting qubit platform with favourable properties such as fast electrical control and noise-resilient operation at sweet spots. However, commonly observed gate-induced electrostatic disorder, drifts, and hysteresis hinder reproducible tune-up of SiGe-based quantum dot arrays. Here, we study Hall bar and quantum dot devices fabricated on Ge/SiGe heterostructures and present a consistent model for the origin of gate hysteresis and its impact on transport metrics and charge noise. As we push the accumulation voltages more negative, we observe non-monotonous changes in the low-density transport metrics, attributed to the induced gradual filling of a spatially varying density of charge traps at the SiGe-oxide interface. With each gate voltage push, we find local activation of a transient low-frequency charge noise component that completely vanishes again after 30 hours. Our results highlight the resilience of the SiGe material platform to interface-trap-induced disorder and noise and pave the way for reproducible tuning of larger multi-dot systems.
RESUMO
We present nuclear spin relaxation measurements in GaAs epilayers using a new pump-probe technique in all-electrical, lateral spin-valve devices. The measured T(1) times agree very well with NMR data available for T>1 K. However, the nuclear spin relaxation rate clearly deviates from the well-established Korringa law expected in metallic samples and follows a sublinear temperature dependence T(1)(-1) is proportional to T(0.6) for 0.1 K≤T≤10 K. Further, we investigate nuclear spin inhomogeneities.
RESUMO
BACKGROUND: Hantavirus infection in humans usually occurs via inhalation of infectious aerosolized excreta of rodents. Horizontal human-to-human transmission was reported only for the highly virulent Andes virus. The likelihood of vertical transmission and the clinical outcome of hantavirus infections in pregnancy is still unpredictable. OBJECTIVES: Very few data were published about the impact of hantaviruses in pregnancy. Here we present four cases of pregnant women infected by European hantaviruses. The risk of vertical virus transmission was investigated. STUDY DESIGN: Four pregnant women with clinical signs of acute hantavirus disease were investigated for hantavirus IgM and IgG after onset of clinical symptoms. Furthermore, the newborns were tested for presence of viral RNA and antibodies in cord blood and, if any parameter was found positive, 8-12 months after delivery. RESULTS: Four women suffered from a hantavirus infection, two of them due to infection by Puumala virus and two by Dobrava-Belgrade virus. Three women delivered healthy babies by vaginal route and one woman by Caesarean section (week 28). In no case hantavirus RNA was detected in cord blood after delivery or in the 8-12 month old babies. Hantavirus IgG was detectable in the cord blood of 3 babies (but not in the preterm child); these antibodies disappeared after 8-12 months indicating a passive transfer of immunoglobulins. No child had any clinical sign of hantavirus infection. CONCLUSIONS: In this study, the absence of vertical hantavirus transmission was demonstrated for pregnant women with onset of hantavirus disease between gestation weeks 14 and 28.
Assuntos
Infecções por Hantavirus/transmissão , Transmissão Vertical de Doenças Infecciosas , Orthohantavírus/isolamento & purificação , Complicações Infecciosas na Gravidez/virologia , Virus Puumala/isolamento & purificação , Adulto , Anticorpos Antivirais/sangue , Feminino , Sangue Fetal/imunologia , Sangue Fetal/virologia , Infecções por Hantavirus/virologia , Humanos , Imunoglobulina G/sangue , Imunoglobulina M/sangue , Recém-Nascido , Masculino , Gravidez , RNA Viral/sangue , Adulto JovemRESUMO
We investigate electrical properties of self-assembled branched InAs nanowires. The branched nanowires are catalytically grown using chemical beam epitaxy, and three-terminal nanoelectronic devices are fabricated from the branched nanowires using electron-beam lithography. We demonstrate that, in difference from conventional macroscopic junctions, the fabricated self-assembled nanowire junction devices exhibit tunable nonlinear electrical characteristics and a signature of ballistic electron transport. As an example of applications, we demonstrate that the self-assembled three-terminal nanowire junctions can be used to implement the functions of frequency mixing, multiplication, and phase-difference detection of input electrical signals at room temperature. Our results suggest a wide range of potential applications of branched semiconductor nanostructures in nanoelectronics.
RESUMO
We report on fabrication of double quantum dots in catalytically grown InAs/InP nanowire heterostructures. In the few-electron regime, starting with both dots empty, our low-temperature transport measurements reveal a clear shell structure for sequential charging of the larger of the two dots with up to 12 electrons. The resonant current through the double dot is found to depend on the orbital coupling between states of different radial symmetry. The charging energies are well described by a capacitance model if next-neighbor capacitances are taken into account.
RESUMO
We report on low-temperature transport measurements on single and double quantum dots defined using local gates to electrostatically deplete InAs nanowires grown by chemical beam epitaxy. This technique allows us to define multiple quantum dots along a semiconducting nanowire and tune the coupling between them.