Strain-Controlled Spin Transition in Heterostructured Metal-Organic Framework Thin Film.

Metal-organic framework (MOF) thin films have recently attracted much attention as a new platform for surface/interface research, where unconventional structural and physical properties emerge. Among the many MOFs as candidates for fabrication of thin films, Hofmann-type MOFs {Fe(pz)[M(CN)4]} [pz = pyrazine; M = Ni (Nipz), M = Pt (Ptpz)] are attractive, because they undergo spin transitions with concomitant structural changes. Here, we demonstrate the first example of a strain-controlled spin transition in heterostructured MOF thin films. The spin transition temperature of Ptpz can be controlled in the temperature range of 300-380 K by fabricating a nanometer-sized heterostructured thin film with a Nipz buffer layer, where the smaller lattice of Nipz causes epitaxial compressive strain to the Ptpz layer. The fabricated heterostructured thin film exhibited a remarkable increase in spin transition temperature with a dynamic structural transformation, confirmed by variable-temperature (VT) X-ray diffraction and VT Raman spectroscopy. By verifying interfacial strain in a heterostructured thin film, we can rationally control the characteristics of MOFs-not only spin transition but also various physical properties such as gas storage, catalysis, sensing, proton conductivity, and electrical properties, among others.

Extended Polymorphism of Two-Dimensional Material.

When controlling electronic properties of bulk materials, we usually assume that the basic crystal structure is fixed. However, in two-dimensional (2D) materials, atomic structure or polymorph is attracting growing interest as a controlling parameter to functionalize their properties. Various polymorphs can exist in transition metal dichalcogenides (TMDCs) from which 2D materials are generated, and polymorphism has drastic impacts on the electronic states. Here we report the discovery of an unprecedented polymorph of a TMDC 2D material. By mechanical exfoliation, we made thin flakes from a single crystal of 2Ha-type tantalum disulfide (TaS2), a metallic TMDC with a charge-density-wave (CDW) phase. Microbeam X-ray diffraction measurements and electrical transport measurements indicate that thin flakes possess a polymorph different from any one known in TaS2 bulk crystals. Moreover, the flakes with the unique polymorph displayed the dramatically enhanced CDW ordering temperature. The present results suggest the potential existence of diverse structural and electronic phases accessible only in 2D materials.

Visualization of Individual Images in Patterned Organic-Inorganic Multilayers Using GISAXS-CT.

Using grazing-incidence small-angle scattering (GISAXS) with computed tomography (CT), we have individually reconstructed the spatial distribution of a thin gold (Au) layer buried under a thin poly(styrene-b-2-vinylpyridine) (PS-b-P2VP) layer. Owing to the difference between total reflection angles of Au and PS-b-P2VP, the scattering profiles for Au nanoparticles and self-assembled nanostructures of PS-b-P2VP could be independently obtained by changing the X-ray angle of incidence. Reconstruction of scattering profiles allows one to separately characterize spatial distributions in Au and PS-b-P2VP nanostructures.

Fabrication and Structural Characterization of an Ultrathin Film of a Two-Dimensional-Layered Metal-Organic Framework, {Fe(py)2[Ni(CN)4]} (py = pyridine).

We report the fabrication and characterization of the first example of a tetracyanonickelate-based two-dimensional-layered metal-organic framework, {Fe(py)2Ni(CN)4} (py = pyridine), thin film. To fabricate a nanometer-sized thin film, we utilized the layer-by-layer method, whereby a substrate was alternately soaked in solutions of the structural components. Surface X-ray studies revealed that the fabricated film was crystalline with well-controlled growth directions both parallel and perpendicular to the substrate. In addition, lattice parameter analysis indicated that the crystal system is found to be close to higher symmetry by being downsized to a thin film.

Mixed-Valence Nickel Bis(azamacrocycle) Compounds with Ghost-Leg-type Sheets.

The fabrication of so-called ghost-leg sheets and their electronic properties is reported. This unique sheet structure is composed of one-dimensional mixed-valence nickel chains, which are linked with one another by bis(azamacrocycle) ligands. They are also topologically unique NiII /NiIII mixed-valence complexes, as confirmed by X-ray and optical measurements. Moreover, their magnetic susceptibilities indicated two-dimensional antiferromagnetic behavior following the Fisher 1D chain model with interchain interactions, where spins on NiIII sites mutually interact antiferromagnetically in the sheets.

Guest-Induced Two-Way Structural Transformation in a Layered Metal-Organic Framework Thin Film.

Fabrication of thin films made of metal-organic frameworks (MOFs) has been intensively pursued for practical applications that use the structural response of MOFs. However, to date, only physisorption-induced structural response has been studied in these films. Chemisorption can be expected to provide a remarkable structural response because of the formation of bonds between guest molecules and reactive metal sites in host MOFs. Here, we report that chemisorption-induced two-way structural transformation in a nanometer-sized MOF thin film. We prepared a two-dimensional layered-type MOF Fe[Pt(CN)4] thin film using a step-by-step approach. Although the as-synthesized film showed poor crystallinity, the dehydrated form of this thin film had a highly oriented crystalline nature (Film-D) as confirmed by synchrotron X-ray diffraction (XRD). Surprisingly, under water and pyridine vapors, Film-D showed chemisorption-induced dynamic structural transformations to Fe(L)2[Pt(CN)4] thin films [L = H2O (Film-H), pyridine (Film-P)], where water and pyridine coordinated to the open Fe2+ site. Dynamic structural transformations were also confirmed by in situ XRD, sorption measurement, and infrared reflection absorption spectroscopy. This is the first report of chemisorption-induced dynamic structural response in a MOF thin film, and it provides useful insights, which would lead to future practical applications of MOFs utilizing chemisorption-induced structural responses.

Neutral-Type One-Dimensional Mixed-Valence Halogen-Bridged Platinum Chain Complexes with Large Charge-Transfer Band Gaps.

One-dimensional (1D) electronic systems have attracted significant attention for a long time because of their various physical properties. Among 1D electronic systems, 1D halogen-bridged mixed-valence transition-metal complexes (the so-called MX chains) have been thoroughly studied owing to designable structures and electronic states. Here, we report the syntheses, structures, and electronic properties of three kinds of novel neutral MX-chain complexes. The crystal structures consist of 1D chains of Pt-X repeating units with (1R,2R)-(-)-diaminocychlohexane and CN(-) in-plane ligands. Because of the absence of a counteranion, the neutral MX chains have short interchain distances, so that strong interchain electronic interaction is expected. Resonance Raman spectra and diffuse-reflectance UV-vis spectra indicate that their electronic states are mixed-valence states (charge-density-wave state: Pt(2+)···X-Pt(4+)-X···Pt(2+)···X-Pt(4+)-X···). In addition, the relationship between the intervalence charge-transfer (IVCT) band gap and the degree of distortion of the 1D chain shows that the neutral MX chains have a larger IVCT band gap than that of cationic MX-chain complexes. These results provide new insight into the physical and electronic properties of 1D chain compounds.

An Electrically Conductive Single-Component Donor-Acceptor-Donor Aggregate with Hydrogen-Bonding Lattice.

An electrically conductive D-A-D aggregate composed of a single component was first constructed by use of a protonated bimetal dithiolate (complex 1H2). The crystal structure of complex 1H2 has one-dimensional (1-D) π-stacking columns where the D and A moieties are placed in a segregated-stacking manner. In addition, these segregated-stacking 1-D columns are stabilized by hydrogen bonds. The result of a theoretical band calculation suggests that a conduction pathway forms along these 1-D columns. The transport property of complex 1H2 is semiconducting (Ea = 0.29 eV, ρrt = 9.1 × 104 Ω cm) at ambient pressure; however, the resistivity becomes much lower upon applying high pressure up to 8.8 GPa (Ea = 0.13 eV, ρrt = 6.2 × 10 Ω cm at 8.8 GPa). The pressure dependence of structural and optical changes indicates that the enhancement of conductivity is attributed to not only an increase of π-π overlapping but also a unique pressure-induced intramolecular charge transfer from D to A moieties in this D-A-D aggregate.

Superconductivity in alkali-metal-doped picene.

Efforts to identify and develop new superconducting materials continue apace, motivated by both fundamental science and the prospects for application. For example, several new superconducting material systems have been developed in the recent past, including calcium-intercalated graphite compounds, boron-doped diamond and-most prominently-iron arsenides such as LaO(1-x)F(x)FeAs (ref. 3). In the case of organic superconductors, however, no new material system with a high superconducting transition temperature (T(c)) has been discovered in the past decade. Here we report that intercalating an alkali metal into picene, a wide-bandgap semiconducting solid hydrocarbon, produces metallic behaviour and superconductivity. Solid potassium-intercalated picene (K(x)picene) shows T(c) values of 7 K and 18 K, depending on the metal content. The drop of magnetization in K(x)picene solids at the transition temperature is sharp (<2 K), similar to the behaviour of Ca-intercalated graphite. The T(c) of 18 K is comparable to that of K-intercalated C(60) (ref. 4). This discovery of superconductivity in K(x)picene shows that organic hydrocarbons are promising candidates for improved T(c) values.

Network topology for the formation of solvated electrons in binary CaO-Al2O3 composition glasses.

Glass formation in the CaO-Al2O3 system represents an important phenomenon because it does not contain typical network-forming cations. We have produced structural models of CaO-Al2O3 glasses using combined density functional theory-reverse Monte Carlo simulations and obtained structures that reproduce experiments (X-ray and neutron diffraction, extended X-ray absorption fine structure) and result in cohesive energies close to the crystalline ground states. The O-Ca and O-Al coordination numbers are similar in the eutectic 64 mol % CaO (64CaO) glass [comparable to 12CaO·7Al2O3 (C12A7)], and the glass structure comprises a topologically disordered cage network with large-sized rings. This topologically disordered network is the signature of the high glass-forming ability of 64CaO glass and high viscosity in the melt. Analysis of the electronic structure reveals that the atomic charges for Al are comparable to those for Ca, and the bond strength of Al-O is stronger than that of Ca-O, indicating that oxygen is more weakly bound by cations in CaO-rich glass. The analysis shows that the lowest unoccupied molecular orbitals occurs in cavity sites, suggesting that the C12A7 electride glass [Kim SW, Shimoyama T, Hosono H (2011) Science 333(6038):71-74] synthesized from a strongly reduced high-temperature melt can host solvated electrons and bipolarons. Calculations of 64CaO glass structures with few subtracted oxygen atoms (additional electrons) confirm this observation. The comparable atomic charges and coordination of the cations promote more efficient elemental mixing, and this is the origin of the extended cage structure and hosted solvated (trapped) electrons in the C12A7 glass.