Size, shape and orientation of macro-sized substrate protrusions affect the toe and foot adhesion of geckos.

Geckos are excellent climbers using compliant, hierarchically arranged adhesive toes to negotiate diverse terrains varying in roughness at multiple size scales. Here, we complement advancements at smaller size scales with measurements at the macro scale. We studied the attachment of a single toe and whole foot of geckos on macroscale rough substrates by pulling them along, across and off smooth rods and spheres mimicking different geometric protrusions of substrates. When we pulled a single toe along rods, the force increased with the rod diameter, whereas the attachment force of dragging toes across rods increased from about 60% on small diameter rods relative to a flat surface to ∼100% on larger diameter rods, but showed no further increase as rod diameter doubled. Toe force also increased as the pulling changed from along-rod loading to across-rod loading. When toes were pulled off spheres, the force increased with increasing sphere diameter as observed for along-rod pulling. For feet with separated toes, attachment on spheres was stronger than that on rods with the same diameter. Attachment force of a foot decreased as rod and sphere size increased but remained sufficient to support the body weight of geckos. These results provide a bridge to the macroscale roughness seen in nature by revealing the importance of the dimension, shape and orientation of macroscale substrate features for compliant toe and foot function of geckos. Our data not only enhance our understanding of geckos' environmental adaptive adhesion but can also provide inspiration for novel robot feet in development.

Role of multiple, adjustable toes in distributed control shown by sideways wall-running in geckos.

Remarkable progress has been made characterizing one of nature's most integrated, hierarchical structures--the fibrillar adhesive system of geckos. Nonetheless, we lack an understanding of how multiple toes coordinate to facilitate geckos' acrobatic locomotion. Here, we tested the control function of gecko toes by running them on vertical substrates varying in orientation, friction and roughness. Sideways wall-running geckos realigned the toes of their top feet upward to resist gravity. Toe contact area was not compromised, but redistributed. Geckos aligned all toes upward to resist slipping when encountering low-friction patches during sideways wall-running. Negotiation of intermittent slippery strips showed an increased contribution of particular toes to compensate for toes that lost adhesion. Increasing substrate roughness using discrete rods perpendicular to sideways locomotion resulted in geckos bending and/or rotating toes to conform to and even grasp the rods, with potential forces more than five times body weight. Geckos increase their effectiveness of manoeuvrability in demanding environments by taking advantage of the distributed control afforded by multiple toes. Our findings provide insight on biological attachment and offer inspiration to advance gecko-inspired robotics and other biomimetic applications.

Cockroaches use diverse strategies to self-right on the ground.

Terrestrial animals often must self-right from an upside-down orientation on the ground to survive. Here, we compared self-righting strategies of the Madagascar hissing, American and discoid cockroaches on a challenging flat, rigid, low-friction surface to quantify the mechanical principles. All three species almost always self-righted (97% probability) when given time (30 s), frequently self-righted (63%) on the first attempt, and on that attempt did so in 1 s or less. When successful, two of the three species gained and used pitch and/or roll rotational kinetic energy to overcome potential energy barriers (American 63% of all attempts and discoid 78%). By contrast, the largest, heaviest, wingless cockroach (Madagascar hissing) relied far less on the energy of motion and was the slowest to self-right. Two of the three species used rolling strategies to overcome low potential energy barriers. Successful righting attempts had greater rolling rotation than failed attempts as the center of mass rose to the highest position. Madagascar hissing cockroaches rolled using body deformation (98% of all trials) and the American cockroach rolled using leg forces (93%). By contrast, the discoid cockroach overcame higher and a wider range of potential energy barriers with simultaneous pitching and rolling using the wings (46% of all trials) and legs (49%) equally to self-right. Our quantification revealed the performance advantages of using rotational kinetic energy to overcome the potential energy barrier and rolling more to lower it, while maintaining diverse strategies for ground-based self-righting.

Cockroaches traverse crevices, crawl rapidly in confined spaces, and inspire a soft, legged robot.

Jointed exoskeletons permit rapid appendage-driven locomotion but retain the soft-bodied, shape-changing ability to explore confined environments. We challenged cockroaches with horizontal crevices smaller than a quarter of their standing body height. Cockroaches rapidly traversed crevices in 300-800 ms by compressing their body 40-60%. High-speed videography revealed crevice negotiation to be a complex, discontinuous maneuver. After traversing horizontal crevices to enter a vertically confined space, cockroaches crawled at velocities approaching 60 cm⋅s(-1), despite body compression and postural changes. Running velocity, stride length, and stride period only decreased at the smallest crevice height (4 mm), whereas slipping and the probability of zigzag paths increased. To explain confined-space running performance limits, we altered ceiling and ground friction. Increased ceiling friction decreased velocity by decreasing stride length and increasing slipping. Increased ground friction resulted in velocity and stride length attaining a maximum at intermediate friction levels. These data support a model of an unexplored mode of locomotion--"body-friction legged crawling" with body drag, friction-dominated leg thrust, but no media flow as in air, water, or sand. To define the limits of body compression in confined spaces, we conducted dynamic compressive cycle tests on living animals. Exoskeletal strength allowed cockroaches to withstand forces 300 times body weight when traversing the smallest crevices and up to nearly 900 times body weight without injury. Cockroach exoskeletons provided biological inspiration for the manufacture of an origami-style, soft, legged robot that can locomote rapidly in both open and confined spaces.

Tail-assisted pitch control in lizards, robots and dinosaurs.

In 1969, a palaeontologist proposed that theropod dinosaurs used their tails as dynamic stabilizers during rapid or irregular movements, contributing to their depiction as active and agile predators. Since then the inertia of swinging appendages has been implicated in stabilizing human walking, aiding acrobatic manoeuvres by primates and rodents, and enabling cats to balance on branches. Recent studies on geckos suggest that active tail stabilization occurs during climbing, righting and gliding. By contrast, studies on the effect of lizard tail loss show evidence of a decrease, an increase or no change in performance. Application of a control-theoretic framework could advance our general understanding of inertial appendage use in locomotion. Here we report that lizards control the swing of their tails in a measured manner to redirect angular momentum from their bodies to their tails, stabilizing body attitude in the sagittal plane. We video-recorded Red-Headed Agama lizards (Agama agama) leaping towards a vertical surface by first vaulting onto an obstacle with variable traction to induce a range of perturbations in body angular momentum. To examine a known controlled tail response, we built a lizard-sized robot with an active tail that used sensory feedback to stabilize pitch as it drove off a ramp. Our dynamics model revealed that a body swinging its tail experienced less rotation than a body with a rigid tail, a passively compliant tail or no tail. To compare a range of tails, we calculated tail effectiveness as the amount of tailless body rotation a tail could stabilize. A model Velociraptor mongoliensis supported the initial tail stabilization hypothesis, showing as it did a greater tail effectiveness than the Agama lizards. Leaping lizards show that inertial control of body attitude can advance our understanding of appendage evolution and provide biological inspiration for the next generation of manoeuvrable search-and-rescue robots.

Sensory processing within cockroach antenna enables rapid implementation of feedback control for high-speed running maneuvers.

Animals are remarkably stable during high-speed maneuvers. As the speed of locomotion increases, neural bandwidth and processing delays can limit the ability to achieve and maintain stable control. Processing the information of sensory stimuli into a control signal within the sensor itself could enable rapid implementation of whole-body feedback control during high-speed locomotion. Here, we show that processing in antennal afferents is sufficient to act as the control signal for a fast sensorimotor loop. American cockroaches Periplaneta americana use their antennae to mediate escape running by tracking vertical surfaces such as walls. A control theoretic model of wall following predicts that stable control is possible if the animal can compute wall position (P) and velocity, its derivative (D). Previous whole-nerve recordings from the antenna during simulated turning experiments demonstrated a population response consistent with P and D encoding, and suggested that the response was synchronized with the timing of a turn executed while wall following. Here, we record extracellularly from individual mechanoreceptors distributed along the antenna and show that these receptors encode D and have distinct latencies and filtering properties. The summed output of these receptors can be used as a control signal for rapid steering maneuvers. The D encoding within the antenna in addition to the temporal filtering properties and P dependence of the population of afferents support a sensory-encoding notion from control theory. Our findings support the notion that peripheral sensory processing can enable rapid implementation of whole-body feedback control during rapid running maneuvers.

Gecko toe and lamellar shear adhesion on macroscopic, engineered rough surfaces.

The role in adhesion of the toes and lamellae - intermediate-sized structures - found on the gecko foot remains unclear. Insight into the function of these structures can lead to a more general understanding of the hierarchical nature of the gecko adhesive system, but in particular how environmental topology may relate to gecko foot morphology. We sought to discern the mechanics of the toes and lamellae by examining gecko adhesion on controlled, macroscopically rough surfaces. We used live Tokay geckos, Gekko gecko, to observe the maximum shear force a gecko foot can attain on an engineered substrate constructed with sinusoidal patterns of varying amplitudes and wavelengths in sizes similar to the dimensions of the toes and lamellae structures (0.5 to 6 mm). We found shear adhesion was significantly decreased on surfaces that had amplitudes and wavelengths approaching the lamella length and inter-lamella spacing, losing 95% of shear adhesion over the range tested. We discovered that the toes are capable of adhering to surfaces with amplitudes much larger than their dimensions even without engaging claws, maintaining 60% of shear adhesion on surfaces with amplitudes of 3 mm. Gecko adhesion can be predicted by the ratio of the lamella dimensions to surface feature dimensions. In addition to setae, remarkable macroscopic-scale features of gecko toes and lamellae that include compliance and passive conformation are necessary to maintain contact, and consequently, generate shear adhesion on macroscopically rough surfaces. Findings on the larger scale structures in the hierarchy of gecko foot function could provide the biological inspiration to drive the design of more effective and versatile synthetic fibrillar adhesives.

Mechanical processing via passive dynamic properties of the cockroach antenna can facilitate control during rapid running.

The integration of information from dynamic sensory structures operating on a moving body is a challenge for locomoting animals and engineers seeking to design agile robots. As a tactile sensor is a physical linkage mediating mechanical interactions between body and environment, mechanical tuning of the sensor is critical for effective control. We determined the open-loop dynamics of a tactile sensor, specifically the antenna of the American cockroach, Periplaneta americana, an animal that escapes predators by using its antennae during rapid closed-loop tactilely mediated course control. Geometrical measurements and static bending experiments revealed an exponentially decreasing flexural stiffness (EI) from base to tip. Quasi-static experiments with a physical model support the hypothesis that a proximodistally decreasing EI can simplify control by increasing preview distance and allowing effective mapping to a putative control variable--body-to-wall distance--compared with an antenna with constant EI. We measured the free response at the tip of the antenna following step deflections and determined that the antenna rapidly damps large deflections: over 90% of the perturbation is rejected within the first cycle, corresponding to almost one stride period during high-speed running (~50 ms). An impulse-like perturbation near the tip revealed dynamics that were characteristic of an inelastic collision, keeping the antenna in contact with an object after impact. We contend that proximodistally decreasing stiffness, high damping and inelasticity simplify control during high-speed tactile tasks by increasing preview distance, providing a one-dimensional map between antennal bending and body-to-wall distance, and increasing the reliability of tactile information.

Locomotion- and mechanics-mediated tactile sensing: antenna reconfiguration simplifies control during high-speed navigation in cockroaches.

Animals can expend energy to acquire sensory information by emitting signals and/or moving sensory structures. We propose that the energy from locomotion itself could permit control of a sensor, whereby animals use the energy from movement to reconfigure a passive sensor. We investigated high-speed, antenna-mediated tactile navigation in the cockroach Periplaneta americana. We discovered that the passive antennal flagellum can assume two principal mechanical states, such that the tip is either projecting backward or forward. Using a combination of behavioral and robotic experiments, we demonstrate that a switch in the antenna's state is mediated via the passive interactions between the sensor and its environment, and this switch strongly influences wall-tracking control. When the tip of the antenna is projected backward, the animals maintain greater body-to-wall distance with fewer body collisions and less leg-wall contact than when the tip is projecting forward. We hypothesized that distally pointing mechanosensory hairs at the tip of the antenna mediate the switch in state by interlocking with asperities in the wall surface. To test this hypothesis, we performed laser ablation of chemo-mechanosensory hairs and added artificial hairs to a robotic antenna. In both the natural and artificial systems, the presence of hairs categorically increased an antenna's probability of switching state. Antennal hairs, once thought to only play a role in sensing, are sufficient for mechanically reconfiguring the state of the entire antenna when coupled with forward motion. We show that the synergy between antennal mechanics, locomotion and the environment simplifies tactile sensing.

Instantaneous kinematic phase reflects neuromechanical response to lateral perturbations of running cockroaches.

Instantaneous kinematic phase calculation allows the development of reduced-order oscillator models useful in generating hypotheses of neuromechanical control. When perturbed, changes in instantaneous kinematic phase and frequency of rhythmic movements can provide details of movement and evidence for neural feedback to a system-level neural oscillator with a time resolution not possible with traditional approaches. We elicited an escape response in cockroaches (Blaberus discoidalis) that ran onto a movable cart accelerated laterally with respect to the animals' motion causing a perturbation. The specific impulse imposed on animals (0.50 [Formula: see text] 0.04 m s[Formula: see text]; mean, SD) was nearly twice their forward speed (0.25 [Formula: see text] 0.06 m s[Formula: see text]. Instantaneous residual phase computed from kinematic phase remained constant for 110 ms after the onset of perturbation, but then decreased representing a decrease in stride frequency. Results from direct muscle action potential recordings supported kinematic phase results in showing that recovery begins with self-stabilizing mechanical feedback followed by neural feedback to an abstracted neural oscillator or central pattern generator. Trials fell into two classes of forward velocity changes, while exhibiting statistically indistinguishable frequency changes. Animals pulled away from the side with front and hind legs of the tripod in stance recovered heading within 300 ms, whereas animals that only had a middle leg of the tripod resisting the pull did not recover within this period. Animals with eight or more legs might be more robust to lateral perturbations than hexapods.

Mole crab-inspired vertical self-burrowing.

We present EMBUR-EMerita BUrrowing Robot-the first legged robot inspired by the Pacific mole crab, Emerita analoga, capable of burrowing vertically downward. We choose Emerita analoga as a model organism for its rapid downward burrowing behaviors, as it is four times as fast as the most rapid bivalve mollusk. Vertical burrowing in granular media is a challenging endeavor due to the tendency for the media to create upwards resistive forces on an intruder, even during purely horizontal motions. Our robot is capable of vertically burrowing its body in granular substrate primarily through excavation using two leg pairs, which are functionally analogous to groupings of leg pairs of the mole crab. We implement a novel leg mechanism with a sweeping trajectory, using compliant fabric to enable an anisotropic force response. The maximum resistive force during the power stroke is 6.4 times that of the return stroke. We compare robot body pitch and spatial trajectories with results from biomechanical studies of the mole crabs. We characterize the sensitivity of the robot to initial depth, body pitch and leg pose, and propose bounds on initial conditions which predict various burrowing failure modes. Parametric studies utilizing Granular Resistive Force Theory inform our understanding of robot behavior in response to leg phasing and orientation. Not only does this robotic platform represent the first robophysical model of vertical mole crab-inspired burrowing, it is also one of the first legged, primarily excavative small-scale burrowing agents.

Incline-dependent adjustments of toes in geckos inspire functional strategies for biomimetic manipulators.

Geckos show versatility by rapidly maneuvering on diverse complex terrain because they benefit from their distributed, setae-covered toes and thus have the ability to generate reliable and adaptive attachment. Significant attention has been paid to their adhesive microstructures (setae), but the effectiveness of the gecko's adaptive attachment at the level of toes and feet remains unclear. In order to better understand the geckos' attachment, we first focused on the deployment of toes while challenging geckos to locomote on varying inclines. When the slope angle was less than 30°, their feet mainly interacted with the substrate using the bases of the toes and generated anisotropic frictional forces. As the slope angle increased to 90°, the participation of the toe bases was reduced. Instead, the setae contribution increased for the middle three toes of the front feet and for the first three toes of the hind feet. As the incline changed from vertical to inverted, the adhesive contribution of the toes of the front feet became more equal, whereas the effective adhesion contact of the hind feet gradually shifted to the toes oriented rearwards. Second, a mathematical model was established and then suggested the potential advantages of distributed control among the toes to regulate foot force. Finally, a physical foot model containing five compliant, adjustable toes was constructed and validated the discoveries with regard to the animals. Using the gecko toes' control strategies, the artificial foot demonstrated diverse behavior regulating attachment forces. The success of the foot prototype not only tested our understanding of the mechanism of biological attachment, but also provided a demonstration for the design and control of gecko-inspired attachment devices, grippers and other manipulators.

Active tails enhance arboreal acrobatics in geckos.

Geckos are nature's elite climbers. Their remarkable climbing feats have been attributed to specialized feet with hairy toes that uncurl and peel in milliseconds. Here, we report that the secret to the gecko's arboreal acrobatics includes an active tail. We examine the tail's role during rapid climbing, aerial descent, and gliding. We show that a gecko's tail functions as an emergency fifth leg to prevent falling during rapid climbing. A response initiated by slipping causes the tail tip to push against the vertical surface, thereby preventing pitch-back of the head and upper body. When pitch-back cannot be prevented, geckos avoid falling by placing their tail in a posture similar to a bicycle's kickstand. Should a gecko fall with its back to the ground, a swing of its tail induces the most rapid, zero-angular momentum air-righting response yet measured. Once righted to a sprawled gliding posture, circular tail movements control yaw and pitch as the gecko descends. Our results suggest that large, active tails can function as effective control appendages. These results have provided biological inspiration for the design of an active tail on a climbing robot, and we anticipate their use in small, unmanned gliding vehicles and multisegment spacecraft.

Mechanisms for Mid-Air Reorientation Using Tail Rotation in Gliding Geckos.

Arboreal animals face numerous challenges when negotiating complex three-dimensional terrain. Directed aerial descent or gliding flight allows for rapid traversal of arboreal environments, but presents control challenges. Some animals, such as birds or gliding squirrels, have specialized structures to modulate aerodynamic forces while airborne. However, many arboreal animals do not possess these specializations but still control posture and orientation in mid-air. One of the largest inertial segments in lizards is their tail. Inertial reorientation can be used to attain postures appropriate for controlled aerial descent. Here, we discuss the role of tail inertia in a range of mid-air reorientation behaviors using experimental data from geckos in combination with mathematical and robotic models. Geckos can self-right in mid-air by tail rotation alone. Equilibrium glide behavior of geckos in a vertical wind tunnel show that they can steer toward a visual stimulus by using rapid, circular tail rotations to control pitch and yaw. Multiple coordinated tail responses appear to be required for the most effective terminal velocity gliding. A mathematical model allows us to explore the relationship between morphology and the capacity for inertial reorientation by conducting sensitivity analyses, and testing control approaches. Robotic models further define the limits of performance and generate new control hypotheses. Such comparative analysis allows predictions about the diversity of performance across lizard morphologies, relative limb proportions, and provides insights into the evolution of aerial behaviors.

Acrobatic squirrels learn to leap and land on tree branches without falling.

Arboreal animals often leap through complex canopies to travel and avoid predators. Their success at making split-second, potentially life-threatening decisions of biomechanical capability depends on their skillful use of acrobatic maneuvers and learning from past efforts. Here, we found that free-ranging fox squirrels (Sciurus niger) leaping across unfamiliar, simulated branches decided where to launch by balancing a trade-off between gap distance and branch-bending compliance. Squirrels quickly learned to modify impulse generation upon repeated leaps from unfamiliar, compliant beams. A repertoire of agile landing maneuvers enabled targeted leaping without falling. Unanticipated adaptive landing and leaping "parkour" behavior revealed an innovative solution for particularly challenging leaps. Squirrels deciding and learning how to launch and land demonstrates the synergistic roles of biomechanics and cognition in robust gap-crossing strategies.

Tails stabilize landing of gliding geckos crashing head-first into tree trunks.

Animals use diverse solutions to land on vertical surfaces. Here we show the unique landing of the gliding gecko, Hemidactylus platyurus. Our high-speed video footage in the Southeast Asian rainforest capturing the first recorded, subcritical, short-range glides revealed that geckos did not markedly decrease velocity prior to impact. Unlike specialized gliders, geckos crashed head-first with the tree trunk at 6.0 ± 0.9 m/s (~140 body lengths per second) followed by an enormous pitchback of their head and torso 103 ± 34° away from the tree trunk anchored by only their hind limbs and tail. A dynamic mathematical model pointed to the utility of tails for the fall arresting response (FAR) upon landing. We tested predictions by measuring foot forces during landing of a soft, robotic physical model with an active tail reflex triggered by forefoot contact. As in wild animals, greater landing success was found for tailed robots. Experiments showed that longer tails with an active tail reflex resulted in the lower adhesive foot forces necessary for stabilizing successful landings, with a tail shortened to 25% requiring over twice the adhesive foot force.

Eyes Toward Tomorrow Program Enhancing Collaboration, Connections, and Community Using Bioinspired Design.

The goal of our Eyes Toward Tomorrow Program is to enrich the future workforce with STEM by providing students with an early, inspirational, interdisciplinary experience fostering inclusive excellence. We attempt to open the eyes of students who never realized how much their voice is urgently needed by providing an opportunity for involvement, imagination, invention, and innovation. Students see how what they are learning, designing, and building matters to their own life, community, and society. Our program embodies convergence by obliterating artificially created, disciplinary boundaries to go far beyond STEM or even STEAM by including artists, designers, social scientists, and entrepreneurs collaborating in diverse teams using scientific discoveries to create inventions that could shape our future. Our program connects two recent revolutions by amplifying Bioinspired Design with the Maker Movement and its democratizing effects empowering anyone to innovate and change the world. Our course is founded in original discovery. We explain the process of biological discovery and the importance of scaling, constraints, and complexity in selecting systems for bioinspired design. By spotlighting scientific writing and publishing, students become more science literate, learn how to decompose a biology research paper, extract the principles, and then propose a novel design by analogy. Using careful, early scaffolding of individual design efforts, students build the confidence to interact in teams. Team building exercises increase self-efficacy and reveal the advantages of a diverse set of minds. Final team video and poster project designs are presented in a public showcase. Our program forms a student-centered creative action community comprised of a large-scale course, student-led classes, and a student-created university organization. The program structure facilitates a community of learners that shifts the students' role from passive knowledge recipients to active co-constructors of knowledge being responsible for their own learning, discovery, and inventions. Students build their own shared database of discoveries, classes, organizations, research openings, internships, and public service options. Students find next step opportunities so they can see future careers. Description of our program here provides the necessary context for our future publications on assessment that examine 21st century skills, persistence in STEM, and creativity.

Jumping kinematics in the wandering spider Cupiennius salei.

Spiders use hemolymph pressure to extend their legs. This mechanism should be challenged when required to rapidly generate forces during jumping, particularly in large spiders. However, effective use of leg muscles could facilitate rapid jumping. To quantify the contributions of different legs and leg joints, we investigated jumping kinematics by high-speed video recording. We observed two different types of jumps following a disturbance: prepared and unprepared jumps. In unprepared jumps, the animals could jump in any direction away from the disturbance. The remarkable directional flexibility was achieved by flexing the legs on the leading side and extending them on the trailing side. This behaviour is only possible for approximately radial-symmetric leg postures, where each leg can fulfil similar functions. In prepared jumps, the spiders showed characteristic leg positioning and the jumps were directed anteriorly. Immediately after a preliminary countermovement in which the centre of mass was moved backwards and downwards, the jump was executed by extending first the fourth and then the second leg pair. This sequence provided effective acceleration to the centre of mass. At least in the fourth legs, the hydraulic and the muscular mechanism seem to interact to generate ground reaction forces.

Insects running on elastic surfaces.

In nature, cockroaches run rapidly over complex terrain such as leaf litter. These substrates are rarely rigid, and are frequently very compliant. Whether and how compliant surfaces change the dynamics of rapid insect locomotion has not been investigated to date largely due to experimental limitations. We tested the hypothesis that a running insect can maintain average forward speed over an extremely soft elastic surface (10 N m(-1)) equal to 2/3 of its virtual leg stiffness (15 N m(-1)). Cockroaches Blaberus discoidalis were able to maintain forward speed (mean +/- s.e.m., 37.2+/-0.6 cm s(-1) rigid surface versus 38.0+/-0.7 cm s(-1) elastic surface; repeated-measures ANOVA, P=0.45). Step frequency was unchanged (24.5+/-0.6 steps s(-1) rigid surface versus 24.7+/-0.4 steps s(-1) elastic surface; P=0.54). To uncover the mechanism, we measured the animal's centre of mass (COM) dynamics using a novel accelerometer backpack, attached very near the COM. Vertical acceleration of the COM on the elastic surface had a smaller peak-to-peak amplitude (11.50+/-0.33 m s(-2), rigid versus 7.7+/-0.14 m s(-2), elastic; P=0.04). The observed change in COM acceleration over an elastic surface required no change in effective stiffness when duty factor and ground stiffness were taken into account. Lowering of the COM towards the elastic surface caused the swing legs to land earlier, increasing the period of double support. A feedforward control model was consistent with the experimental results and provided one plausible, simple explanation of the mechanism.

Ten robotics technologies of the year.

We identify 10 exciting robotics developments and technologies, ranging from original research that may change the future of robotics to commercial products that enable basic science and drive industrial and medical innovations.