RESUMO
Previously, different approaches of spectral comparison were evaluated, and the spectral difference (SD) method was shown to be valuable for its linearity with spectral changes and its independence on data spacing (Anal. Biochem. 434 (2013) 153-165). In this note, we present an enhancement of the SD calculation, referred to as the "weighted spectral difference" (WSD), by implementing a weighting function based on relative signal magnitude. While maintaining the advantages of the SD method, WSD improves the method sensitivity to spectral changes and tolerance for baseline inclusion. Furthermore, a generalized formula is presented to unify further development of approaches to quantify spectral difference.
Assuntos
Proteínas/química , Análise Espectral/métodos , Conformação ProteicaRESUMO
Optical and vibrational spectroscopic techniques are important tools for evaluating secondary and tertiary structures of proteins. These spectroscopic techniques are routinely applied in biopharmaceutical development to elucidate structural characteristics of protein products, to evaluate the impact of processing and storage conditions on product quality, and to assess comparability of a protein product before and after manufacturing changes. Conventionally, the degree of similarity between two spectra has been determined visually. In addition to requiring a significant amount of analyst training and experience, visual inspection of spectra is inherently subjective, and any determination of comparability based on visual analysis of spectra is therefore arbitrary. Here, we discuss a general methodology for evaluating the suitability of numerical methods to calculate spectral similarity, and then we apply the methodology to compare four quantitative spectral similarity methods: the correlation coefficient, area of spectral overlap, derivative correlation algorithm, and spectral difference methods. While the most effective spectral similarity method may depend on the particular application, all four approaches are superior to visual evaluation, and each is suitable for assessing the degree of similarity between spectra.
Assuntos
Dicroísmo Circular , Proteínas/química , Espectroscopia de Infravermelho com Transformada de Fourier , Algoritmos , Anticorpos Monoclonais/química , Anticorpos Monoclonais/metabolismo , Estrutura Secundária de Proteína , Estrutura Terciária de Proteína , Proteínas/metabolismoRESUMO
The in vitro binding stoichiometry of denosumab, an IgG2 fully human monoclonal therapeutic antibody, to RANK ligand was determined by multiple complementary size separation techniques with mass measuring detectors, including two solution-based techniques (size-exclusion chromatography with static light scattering detection and sedimentation velocity analytical ultracentrifugation) and a gas-phase analysis by electrospray ionization time-of-flight mass spectrometry from aqueous nondenaturing solutions. The stoichiometry was determined under defined conditions ranging from small excess RANK ligand to large excess denosumab (up to 40:1). High concentrations of denosumab relative to RANK ligand were studied because of their physiological relevance; a large excess of denosumab is anticipated in circulation for extended periods relative to much lower concentrations of free soluble RANKL. The studies revealed that an assembly including 3 denosumab antibody molecules bound to 2 RANKL trimers (3D2R) is the most stable complex in DPBS at 37 °C. This differs from the 1:1 binding stoichiometry reported for RANKL and osteoprotegerin (OPG), a soluble homodimeric decoy receptor which binds RANKL with high affinity. Denosumab and RANKL also formed smaller assemblies including 1 denosumab and 2 RANKL trimer molecules (1D2R) under conditions of excess RANKL, 3 denosumab molecules and 1 RANKL trimer (3D1R) under conditions of excess denosumab, and larger assemblies, but these intermediate species were only present at lower temperatures (4 °C), shortly after mixing denosumab and RANKL, and converted over time to the more stable 3D2R assembly.
Assuntos
Anticorpos Monoclonais/química , Mapeamento de Interação de Proteínas , Ligante RANK/antagonistas & inibidores , Ligante RANK/química , Animais , Anticorpos Monoclonais/metabolismo , Anticorpos Monoclonais Humanizados , Soluções Tampão , Células CHO , Cricetinae , Denosumab , Escherichia coli/química , Escherichia coli/genética , Escherichia coli/metabolismo , Glicosilação , Humanos , Imunoglobulina G/química , Imunoglobulina G/genética , Estabilidade Proteica , Ligante RANK/sangue , Proteínas Recombinantes de Fusão/química , Proteínas Recombinantes de Fusão/genética , SolubilidadeRESUMO
The required performance of an analytical method depends on the purpose for which it will be used. As a methodology matures, it may find new application, and the performance demands placed on the method can increase. Sedimentation velocity analytical ultracentrifugation (SV-AUC) has a long and distinguished history with important contributions to molecular biology. Now the technique is transitioning into industrial settings, and among them, SV-AUC is now used to quantify the amount of protein aggregation in biopharmaceutical protein products, often at levels less than 1% of the total protein mass. In this paper, we review recent advances to SV methodology which have been shown to improve quantitation of protein aggregation. Then we discuss the performance of the SV method in its current state, with emphasis on the precision and quantitation limit of the method, in the context of existing industrial guidance on analytical method performance targets for quantitative methods.
Assuntos
Proteínas/química , Ultracentrifugação/métodos , Animais , Bovinos , Proteínas/metabolismo , Soroalbumina Bovina/química , Ultracentrifugação/tendênciasRESUMO
Obtaining an elegant finished pharmaceutical product remains a problem when salt concentration is high, protein concentration is low, and particularly when both conditions are combined. We propose a simple approach to develop a robust lyophilized formulation in the presence of salt and at low protein concentration. We combine this with a commercially viable lyophilization cycle that can serve as a starting point for many protein-based pharmaceutical products. In this manner the formulator scientist, even with little experience, can develop a robust and visually acceptable lyophilized product. In addition, this platform allows the production of placebo vials with no visual differences compared to the active product.
Assuntos
Produtos Biológicos , Excipientes , Liofilização , ProteínasRESUMO
Subvisible particles in formulations intended for parenteral administration are of concern in the biopharmaceutical industry. However, monitoring and control of subvisible particulates can be complicated by formulation components, such as the silicone oil used for the lubrication of prefilled syringes, and it is difficult to differentiate microdroplets of silicone oil from particles formed by aggregated protein. In this study, we demonstrate the ability of flow cytometry to resolve mixtures comprising subvisible bovine serum albumin (BSA) aggregate particles and silicone oil emulsion droplets with adsorbed BSA. Flow cytometry was also used to investigate the effects of silicone oil emulsions on the stability of BSA, lysozyme, abatacept, and trastuzumab formulations containing surfactant, sodium chloride, or sucrose. To aid in particle characterization, the fluorescence detection capabilities of flow cytometry were exploited by staining silicone oil with BODIPY 493/503 and model proteins with Alexa Fluor 647. Flow cytometric analyses revealed that silicone oil emulsions induced the loss of soluble protein via protein adsorption onto the silicone oil droplet surface. The addition of surfactant prevented protein from adsorbing onto the surface of silicone oil droplets. There was minimal formation of homogeneous protein aggregates due to exposure to silicone oil droplets, although oil droplets with surface-adsorbed trastuzumab exhibited flocculation. The results of this study demonstrate the utility of flow cytometry as an analytical tool for monitoring the effects of subvisible silicone oil droplets on the stability of protein formulations.
Assuntos
Anticorpos Monoclonais/química , Citometria de Fluxo/métodos , Imunoconjugados/química , Muramidase/química , Soroalbumina Bovina/química , Óleos de Silicone/química , Abatacepte , Adsorção , Anticorpos Monoclonais Humanizados , Química Farmacêutica , Emulsões , Tamanho da Partícula , Espectrometria de Fluorescência/métodos , Tensoativos/química , TrastuzumabRESUMO
Sedimentation velocity analytical ultracentrifugation (SV-AUC) is routinely applied in biopharmaceutical development to measure levels of protein aggregation in protein products. SV-AUC is free from many limitations intrinsic to size exclusion chromatography (SEC) such as mobile phase and column interaction effects on protein self-association. Despite these clear advantages, SV-AUC exhibits lower precision measurements than corresponding measurements by SEC. The precision of SV-AUC is influenced by numerous factors, including sample characteristics, cell alignment, centerpiece quality, and data analysis approaches. In this study, we evaluate the precision of SV-AUC in its current practice utilizing a multilaboratory, multiproduct intermediate precision study. We then explore experimental approaches to improve SV-AUC measurement precision, with emphasis on utilization of high quality centerpieces.
Assuntos
Proteínas/análise , Ultracentrifugação/métodos , Cromatografia em Gel , Ligação Proteica , Conformação Proteica , Proteínas/químicaRESUMO
A diverse set of analytical tools is required to characterize the complex structural properties of biopharmaceutical products and to ensure their quality, stability, safety, and efficacy. It is generally necessary to demonstrate that such tools are capable of measuring one or more intended attribute(s) of the product with a desired degree of precision, accuracy, linearity, specificity and sensitivity. Here we present a general framework upon which experiments may be designed to establish analytical procedure performance, predicated on the hypothesis that many analytical procedures have universal performance characteristics - that is, the validity of the measured result is a function of the measurement system and data characteristics and is not a function of the specific analyte being measured. Using simulated data, we demonstrate that the generalized approach improves the scientific validity of resulting descriptions of procedure performance by reducing the incidence of false failures and missed faults during future use of the procedure. Broad adoption of these principles will facilitate an improved understanding of procedure performance characteristics while requiring fewer human resources for procedure qualification studies.
Assuntos
Produtos Biológicos , HumanosRESUMO
Protein secondary structures are frequently assessed using infrared and circular dichroism spectroscopies during drug development (e.g., during product comparability and biosimilarity studies, reference standard characterization, etc.) However, there is little information on the lower limits of quantitation of structural misfolds and impurities for these methods. A model system using a monoclonal antibody reference material was spiked at various levels with a protein that had a significantly different secondary structure to represent the presence of a stable and discreet structural misfold. The ability of circular dichroism, transmission Fourier transform infrared spectroscopy and microfluidic modulation spectroscopy, along with various spectral comparison algorithms, were assessed for their ability to detect the presence and quantify the amount of the misfolded structure.
Assuntos
Anticorpos Monoclonais/química , Medicamentos Biossimilares/química , Dicroísmo Circular , Imunoglobulina G/química , Técnicas Analíticas Microfluídicas , Espectroscopia de Infravermelho com Transformada de Fourier , Algoritmos , Dobramento de Proteína , Estrutura Secundária de ProteínaRESUMO
Size-exclusion high-performance liquid chromatography (SE-HPLC, SEC) is the long-standing biopharmaceutical industry standard for quantitation of soluble protein aggregates. Recently, sedimentation velocity analytical ultracentrifugation (SV-AUC) has emerged as a possible orthogonal technique to SEC for soluble aggregate quantitation. Moreover, asymmetrical flow field flow fractionation (AF4) has shown early promise in quantifying protein aggregates, both soluble and insoluble. We report soluble aggreg ate quantities measured by SEC, AF4, and SV-AUC analyzed by SEDFIT/c(s) for acid stressed and unstressed samples of a recombinant humanized monoclonal antibody. In equivalent antibody samples, SV-AUC, and AF4 detect markedly higher total aggregate levels than SEC. Furthermore, SEC fails to detect higher molecular weight soluble aggregates apparent in SV-AUC and AF4 analyses. Pooled fractions containing soluble dimeric aggregates were purified and re-analyzed by both SV-AUC and SEC. Reinjection of purified dimer onto the SEC column induces formation of detectable quantities of monomer and trimer. All sample types show statistically significant (p-values<0.01) antibody losses through the SEC column. This incomplete mass recovery from SEC indicates probable antibody physical adsorption to gel filtration media. Analysis of the sedimentation behavior of high molecular weight components suggests increased molecular asphericity with increasing molecular weight. We present an aggregation model based on nearly linear end-to-end assembly of monomeric subunits which is shown to be consistent with SV-AUC, SEC, AF4, and dynamic light scattering (DLS) results.
Assuntos
Anticorpos Monoclonais/análise , Proteínas Recombinantes/análise , Cromatografia em Gel , Fracionamento por Campo e Fluxo , Humanos , Luz , Espalhamento de Radiação , SolubilidadeRESUMO
UNLABELLED: The rapid identification of protein drug products for packaging and receiving can significantly reduce disposition cycle time, and thereby improve the efficiency and productivity of the supply chain to better meet the needs of patients. In this feasibility study, we demonstrate a novel methodology that combines Raman spectroscopy with discriminant analysis that can be used for rapid identification or verification of finished products. With this methodology, Raman spectra of formulated therapeutic proteins were collected non-invasively with the samples either in a quartz cuvette or in the original glass vials, and analyzed without subtraction of buffer or placebo solutions. The algorithm used for the discriminant analysis was Mahalanobis distance by principal component analysis with residuals. In addition to product identification, the methodology has the potential to be used for characterizing formulated proteins when exposed to external stresses based on the changes of Mahalanobis distances. LAY ABSTRACT: The rapid identification of protein drug products for packaging and receiving can significantly reduce disposition cycle time, and thereby improve the efficiency and productivity of the supply chain. In this study, we demonstrate a novel methodology that combines Raman spectroscopy with discriminant analysis to rapidly identify formulated proteins non-invasively.
Assuntos
Proteínas/análise , Análise Espectral Raman/métodos , Análise Discriminante , Composição de Medicamentos , Humanos , Imunoglobulina G/análise , Proteínas/síntese química , Proteínas Recombinantes de Fusão/análise , Fatores de TempoRESUMO
Characterization of the higher order structure (HOS) of protein-based biopharmaceutical products is an important aspect of their development. Opinions vary about how best to apply biophysical methods, in which contexts to use these methods, and how to use the resulting data to make technical decisions as drug candidates are commercialized [Gabrielson JP, Weiss WF IV. J Pharm Sci. 2015;104(4):1240-1245]. The aim of this commentary is to provide guidance for the development and implementation of a robust and comprehensive HOS characterization strategy. We first consider important concepts involved in developing a strategy that is appropriately suited to a particular biologic, and then discuss ways industry can partner with academia, technology companies, government laboratories, and regulatory agencies to improve the consistency with which HOS characterization is applied across the biopharmaceutical industry.
Assuntos
Produtos Biológicos/química , Tomada de Decisões , Indústria Farmacêutica/métodos , Estatística como Assunto/métodos , Tecnologia Farmacêutica/métodos , Animais , Descoberta de Drogas/métodos , Descoberta de Drogas/tendências , Indústria Farmacêutica/tendências , Humanos , Relação Estrutura-Atividade , Tecnologia Farmacêutica/tendênciasRESUMO
Characterization of the higher order structure (HOS) of biological products has been growing in importance in recent years. Scientists in the biopharmaceutical industry, academic researchers, and regulators are all increasingly aware of the critical role that HOS plays in maintaining the stability and intended biological function of biopharmaceutical products. We organized a consortium of scientists and researchers from industry and academic institutions to address how HOS data can be used most effectively to drive decisions during product development. In this commentary, we introduce the purpose, objectives, and scope of the consortium and then provide some brief points to consider in the context of characterizing HOS of biopharmaceutical products. Scientific advances in HOS analysis, as well as continued dialogue among academia, industry, and regulatory agencies will ensure that appropriate methodologies are used to inform technical decision-making during biopharmaceutical development.
Assuntos
Produtos Biológicos/química , Biofarmácia/métodos , Comportamento de Escolha , Técnicas de Apoio para a Decisão , Comunicação Interdisciplinar , Proteínas/química , Produtos Biológicos/efeitos adversos , Consenso , Comportamento Cooperativo , Humanos , Conformação Proteica , Proteínas/efeitos adversos , Medição de Risco , Relação Estrutura-AtividadeRESUMO
Differential scanning calorimetry (DSC) is a useful tool for monitoring thermal stability of the molecular conformation of proteins. Here, we present an example of the sensitivity of DSC to changes in stability arising from a common chemical degradation pathway, oxidation. This Note is part of a series of industry case studies demonstrating the application of higher order structure data for technical decision making. For this study, six protein products from three structural classes were evaluated at multiple levels of oxidation. For each protein, the melting temperature (Tm ) decreased linearly as a function of oxidation; however, differences in the rate of change in Tm , as well as differences in domain Tm stability were observed across and within structural classes. For one protein, analysis of the impact of oxidation on protein function was also performed. For this protein, DSC was shown to be a leading indicator of decreased antigen binding suggesting a subtle conformation change may be underway that can be detected using DSC prior to any observable impact on product potency. Detectable changes in oxidized methionine by mass spectrometry (MS) occurred at oxidation levels below those with a detectable conformational or functional impact. Therefore, by using MS, DSC, and relative potency methods in concert, the intricate relationship between a primary structural modification, changes in conformational stability, and functional impact can be elucidated.
Assuntos
Produtos Biológicos/química , Varredura Diferencial de Calorimetria , Técnicas de Apoio para a Decisão , Descoberta de Drogas/métodos , Proteínas/química , Tecnologia Farmacêutica/métodos , Química Farmacêutica , Estabilidade de Medicamentos , Modelos Lineares , Espectrometria de Massas , Metionina/química , Modelos Químicos , Oxirredução , Conformação Proteica , Estabilidade Proteica , Relação Estrutura-Atividade , TemperaturaRESUMO
The levels and types of aggregates present in protein biopharmaceuticals must be assessed during all stages of product development, manufacturing, and storage of the finished product. Routine monitoring of aggregate levels in biopharmaceuticals is typically achieved by size exclusion chromatography (SEC) due to its high precision, speed, robustness, and simplicity to operate. However, SEC is error prone and requires careful method development to ensure accuracy of reported aggregate levels. Sedimentation velocity analytical ultracentrifugation (SV-AUC) is an orthogonal technique that can be used to measure protein aggregation without many of the potential inaccuracies of SEC. In this chapter, we discuss applications of SV-AUC during biopharmaceutical development and how characteristics of the technique make it better suited for some applications than others. We then discuss the elements of a comprehensive analytical control strategy for SV-AUC. Successful implementation of these analytical control elements ensures that SV-AUC provides continued value over the long time frames necessary to bring biopharmaceuticals to market.
Assuntos
Proteínas/isolamento & purificação , Biofarmácia , Humanos , Peso Molecular , Agregados Proteicos , Proteínas/química , Ultracentrifugação/métodosRESUMO
Protein therapeutics differ considerably from small molecule drugs because of the presence of higher order structure (HOS), post-translational modifications, inherent molecular heterogeneity, and unique stability profiles. At early stages of development, multiple molecular candidates are often produced for the same biological target. In order to select the most promising molecule for further development, studies are carried out to compare and rank order the candidates in terms of their manufacturability, purity, and stability profiles. This note reports a case study on the use of selected HOS characterization methods for candidate selection and the role of HOS data in identifying potential challenges that may be avoided by selecting the optimal molecular entity for continued development.
Assuntos
Anticorpos Monoclonais/química , Produtos Biológicos/química , Técnicas de Apoio para a Decisão , Descoberta de Drogas/métodos , Tecnologia Farmacêutica/métodos , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Concentração de Íons de Hidrogênio , Tamanho da Partícula , Agregados Proteicos , Conformação Proteica , Estabilidade Proteica , Relação Estrutura-Atividade , Temperatura , Fatores de TempoRESUMO
Sedimentation velocity analytical ultracentrifugation (SV-AUC) has found application in the biopharmaceutical industry as a method of detecting and quantifying protein aggregates. While the technique offers several advantages (i.e., matrix-free separation and minimal sample handling), its results exhibit a high degree of variability relative to orthogonal size-sensitive separation techniques such as size exclusion chromatography (SEC). The goal of this work is to characterize and quantify the sources of variability that affect SV-AUC results, particularly size distributions for a monoclonal antibody monomer/dimer system. Contributions of individual factors to the overall variability are examined. Results demonstrate that alignment of sample cells to the center of rotation is the most significant contributing factor to overall variability. The relative importance of other factors (e.g., temperature equilibration, time-invariant noise, meniscus misplacement, etc.) are quantified and discussed.
Assuntos
Anticorpos Monoclonais/química , Proteínas/química , Ultracentrifugação , Soluções Tampão , Simulação por Computador , Interpretação Estatística de Dados , Dimerização , Indicadores e Reagentes , Peso Molecular , Proteínas Recombinantes de Fusão/química , Reprodutibilidade dos Testes , TemperaturaRESUMO
The final formulations of modern pharmaceutical protein products typically contain sugars or sugar alcohols as stabilizers. Migration of these sugars under the influence of an applied gravitational field during sedimentation velocity analytical ultracentrifugation (SV-AUC) produces dynamic density and viscosity gradients. If the formation of such gradients is not taken into account during data analysis, the capability of the SV-AUC technique to detect protein oligomers/aggregates may be dramatically impacted. In the example described here, the limit of quantitation (LOQ) of a simulated monoclonal antibody (mAb) dimer increases from 0.8% to 2.4% upon addition of 5% sorbitol to the formulation. This study uses simulated and experimental SV-AUC data to demonstrate the detrimental effect of dynamic gradients; it further explores how sophisticated data analysis techniques, including SEDFIT's inhomogeneous solvent options, may be used to mitigate the detection problems caused by the sedimentation of excipients.
Assuntos
Química Farmacêutica/métodos , Excipientes/análise , Proteínas/análise , Excipientes/química , Ligação Proteica/fisiologia , Proteínas/química , Ultracentrifugação/métodosRESUMO
Sedimentation velocity analytical ultracentrifugation (SV-AUC) has emerged in the biopharmaceutical industry as a technique to detect small quantities of protein aggregates. However, the limits of detection and quantitation of these aggregates are not yet well understood. Although diverse factors (molecule, instrument, technique, and software dependent) preclude an all-encompassing measurement of these limits for the complete system, it is possible to use simulated data to determine the quantitation limits of the data analysis software aspect. The current study examines the performance of the SEDFIT/c(s) data analysis tool with simulated antibody monomer/dimer and monomer/aggregate systems. Under completely ideal conditions (zero noise, known meniscus, and shape factor homogeneity), the software limit of quantitation was 0.01% for the monomer/aggregate system and 0.03% for the less well-resolved monomer/dimer system. Under more realistic conditions (0.005 OD root mean square [RMS] noise, shape factor variability, and long solution column), the software limits of quantitation were 0.2 and 0.6% (0.002 and 0.006 OD) for the monomer/aggregate and monomer/dimer systems, respectively. Interestingly, diminished quantitation accuracy at very low levels of oligomer was not accompanied by deterioration of fit quality (as measured by root mean square deviation [RMSD] and residuals bitmap images).