Adsorption Capacity of Carbon-Silica Composites Towards Diclofenac in Poly(acrylic acid) Containing Systems: A Crucial Study on Common Wastewater Contaminants.

Diclofenac is one of the most popular over-the-counter non-steroidal anti-inflammatory drug and poly(acrylic acid) is a frequently used as thickener, filler or stabilizer. For these reasons, they are common organic contaminants in raw wastewater. The purpose of the presented studies was to compare the adsorption capacity of three carbon-silica composites - metal-free C/SiO2, iron-enriched C/Fe/SiO2 and manganese-enriched C/Mn/SiO2 towards diclofenac. The studies were carried out in single, and mixed systems in the presence of poly(acrylic acid) polymer. Adsorption, desorption and kinetics of the adsorption process were investigated. The concentration of diclofenac in the supernatants was determined using high-performance liquid chromatography. The solids were also characterized with an ASAP apparatus using low-temperature nitrogen desorption adsorption isotherms at liquid nitrogen temperature. In addition, potentiometric titrations and electrophoretic mobility measurements, as well as stability tests of the studied suspensions were carried out. The most efficient composite among investigated ones proved to be C/Fe/SiO2 removing diclofenac at the level of 46.68 mg/g for its initial concentration of 90 ppm. The results obtained clearly demonstrated that the carbon-silica composites are effective in separation of drugs from aqueous solutions and can be successfully used in the future for the removal of organic pollutants from water environment.

The influence of sodium alginate on the structural and adsorption properties of resorcinol-formaldehyde resins and their porous carbon derivatives.

A series of carbon composites were synthesised by carbonisation of resorcinol-formaldehyde resin mixtures with the addition of different amounts of sodium alginate (SA) and compared with a composite prepared using Na2 CO3 as a catalyst for the polymerisation reaction. The effect of operating parameters such as SA concentration and polycondensation time on the structural and morphological properties of resorcinol-formaldehyde resins (RFR) and carbon-derived composites was investigated for further use as adsorbents. The synthesised composites were characterised by FTIR, SEM, Raman spectroscopy and N2 adsorption/desorption techniques. It was found that the morphology, specific surface area (SBET ~347-559 m2 /g), volume and particle size distribution (~0.5-4 µm) and porosity (Vpor =0.178-0.348 cm3 /g) of the composites were influenced by the concentration of SA and the synthesis technique and determined the adsorption properties of the materials. It was found that the surface of the filled chars was found to have an affinity for heavy metals and has the ability to form chemical bonds with cadmium ions. The maximum sorption capacities for Cd(II), i. e. 13.28 mg/g, were observed for the sample synthesised with the highest SA content. This confirms the statement that as-synthesised materials are promising adsorbents for environmental applications.

Activated Carbon from Agricultural Wastes for Adsorption of Organic Pollutants.

Agricultural waste materials (strawberry seeds and pistachio shells) were used for preparation of activated carbons by two various methods. Chemical activation using acetic acid and physical activation with gaseous agents (carbon dioxide and water vapor) were chosen as mild and environmentally friendly methods. The effect of type of raw material, temperature, and activation agent on the porous structure characteristics of the materials was discussed applying various methods of analysis. The best obtained activated carbons were characterized by high values of specific surface area (555-685 m2/g). The Guinier analysis of small-angle X-ray scattering (SAXS) curves showed that a time of activation affects pore size. The samples activated using carbon dioxide were characterized mostly by the spherical morphology of pores. Adsorbents were utilized for removal of the model organic pollutants from the single- and multicomponent systems. The adsorption capacities for the 4-chloro-2-methyphenoxyacetic acid (MCPA) removal were equal to 1.43-1.56 mmol/g; however, for adsorbent from strawberry seeds it was much lower. Slight effect of crystal violet presence on the MCPA adsorption and inversely was noticed as a result of adsorption in different types of pores. For similar herbicides strong competition in capacity and adsorption rate was observed. For analysis of kinetic data various equations were used.

Physicochemical and Adsorption Characterization of Char Derived from Resorcinol-Formaldehyde Resin Modified with Metal Oxide/Silica Nanocomposites.

A series of metal- and silica-containing carbon-based nanocomposites were synthesized by pyrolysis of a resorcinol-formaldehyde polymer modified with metal oxide/silica nanocomposites (MxOy/SiO2, where M = Mg, Mn, Ni, Cu and Zn) via the thermal oxidative destruction of metal acetates adsorbed on highly dispersed silica (A380). The concentration of metals was 3.0 mmol/g SiO2. The phase composition and morphological, structural and textural properties of the carbon materials were analyzed by X-ray diffraction, SEM, Raman spectroscopy and low-temperature N2 adsorption. Thermal decomposition under a nitrogen atmosphere and in air was analyzed using TG-FTIR and TG-DTG-DSC techniques to determine the influence of the filler on the decomposition process. The synthesized composites show mesoporous structures with high porosity and narrow pore size distributions. It could be shown that the textural properties and the final composition of the nanocomposites depend on the metal oxide fillers of the precursors. The data obtained show that nickel and copper promote the degree of graphitization and a structural order with the highest porosity and largest specific surface area of the hybrid composites. The good adsorption properties of the obtained materials were shown for the recovery of p-chlorophenol and p-nitrophenol from aqueous solutions.

Green Synthesis and Efficient Adsorption: Na-X Zeolite vs. C/Mn/SiO2 Composite for Heavy Metals Removal.

The studies aimed to test the adsorption capacity of two silica-enriched porous materials, synthetic Na-X zeolite and Mn-containing carbon composite, towards Pb(II) and Zn(II) ions in single and mixed systems and in the presence of diclofenac (DCF) and (or) poly(acrylic acid) (PAA). The synthetic zeolite was characterized by a well-developed surface area of 728 m2/g and a pore diameter of 1.73 nm, while the carbon composite exhibited 268 m2/g and 7.37 nm, respectively. Na-X was found to be more efficient than the carbon composite (75-212 mg/g) in adsorbing heavy metal ions in both single and bimetallic systems (322-333 mg/g). In turn, the C/Mn/SiO2 composite was more effective in removing Pb(II) ions from the systems that simultaneously contained DCF or PAA (480 and 476 mg/g, respectively). The Na-X zeolite demonstrated the greatest stability in all the systems studied. The highest stability was observed in the DCF + Pb(II) mixture, in contrast to the carbon composites where the stability was much lower. To evaluate the possibility of regeneration of the solids, HCl proved to be the best desorbent for heavy metal ions (efficiency of 99%). In general, both adsorbents offer promising potential for solving environmental problems.

Novel carbon-based composites enriched with Fe and Mn as effective and eco-friendly adsorbents of heavy metals in multicomponent solutions.

With increasing demand for adsorbents highly effective in pollutant removal, carbon-based porous materials are becoming more and more popular. In this work, a new approach to the synthesis of such solids using an environmentally friendly, two-step preparation method is presented. A series of hybrid porous silica-containing carbon composites was synthesized, namely: metal free (C/SiO2), enriched with manganese (C/Mn/SiO2), as well as iron (C/Fe/SiO2). The effect of additives on the structure and morphology of the composites was evaluated using X-ray photoelectron spectroscopy (XPS), nitrogen adsorption/desorption and scanning electron microscope (SEM). The as-synthesized carbons were used as effective adsorbents for the simultaneous removal of heavy metals, including lead (Pb(II)) and zinc (Zn(II)) ions. In particular, it was determined that C/Mn/SiO2 sample demonstrated the highest adsorption capacity towards Pb(II) and Zn(II) ions. It was equal to 211.60 mg/g for Pb(II) and 74.95 mg/g for Zn(II). Zeta potential and surface charge density of the solids, with and without metals, were investigated to determine electrical double layer structure, whereas stability studies and aggregate size measurements were performed to estimate solid aggregation under selected conditions. It was established that solids with adsorbed metals formed suspensions with lower stability than those without ions. This, in turn, facilitates their separation from aqueous solutions.

Simultaneous adsorption of Cu(II) ions and poly(acrylic acid) on the hybrid carbon-mineral nanocomposites with metallic elements.

In order to propose a novel, effective adsorbent of Cu(II) ions, hybrid carbon-mineral nanocomposites with metallic elements (Mn/Fe in the case of B-6, Mn - B-8) were examined. A combination of mechanochemical and pyrolytic methods was used to obtain these bimodal micro-mesopore systems. First, mechanochemical mixing of phenol-formaldehyde resin and inorganic compounds in a ball mill was carried out. Then, the pyrolysis of the mixture under inert atmosphere at 800 °C was performed. The obtained composites were characterized using nitrogen adsorption/desorption, Fourier transform infrared spectroscopy, electron microscopes as well as X-ray diffraction, X-ray fluorescence and X-ray photoelectron spectroscopy. Adsorption, electrokinetic and aggregation studies were also performed, in the absence and presence of poly(acrylic acid) (PAA) - a macromolecular compound commonly used in industry and agriculture, which may be present in wastewater together with copper(II) ions. Under examined conditions (at pH 5 and 6), Cu(II) adsorbed amount was higher on the B-8 surface than on the B-6 one. At pH 6 for the initial Cu(II) concentration 100 ppm, 51.74% of the ions was adsorbed on B-8% and 46.68% - on B-6. Heavy metal adsorption contributes to stronger aggregation of nanocomposite particles. Thus, the presented bimodal solids, especially that containing Mn (called B-8), can be considered as adsorbents in heavy metal removal from aqueous solutions.

Study on Adsorption and Aggregation in the Mixed System of Polyacrylamide, Cu(II) Ions and Innovative Carbon-Silica Composite.

The paper presents an original study on adsorption and aggregation phenomena in a mixed system consisting of a macromolecular compound, heavy metal ions and an innovative adsorbent. The authors used ionic polyacrylamides (PAM), Cu(II) ions and carbon-silica composite (C-SiO2) in the experiments. Such a system has not yet been described in the literature and therefore, the article is of significant novelty and great importance. The composite was prepared by mixing phenol-formaldehyde resin with silica and pyrolysis at 800 °C. The adsorbed amounts of Cu(II) ions and PAM were determined spectrophotometrically. C-SiO2 was characterized using potentiometric titration, microelecrophoresis and Fourier Transform Infrared Spectroscopy (FTIR) analysis. In turn, the C-SiO2 aggregation was established turbidimetrically as well as using a particle size analyzer. The obtained results indicated that both Cu(II) ions and ionic polyacrylamide were adsorbed on the composite surface at pH 6. The highest noted adsorbed amounts were 9.8 mg/g for Cu(II) and 35.72 mg/g for CT PAM-25%. Cu(II) ions increased the anionic PAM adsorbed and reduced the cationic PAM one. The adsorption of anionic PAM (50 ppm) stimulated the solid aggregation significantly. What is more, Cu(II) ions enhanced this process. The size of particles/aggregates formed without additives equaled 0.44 µm, whereas in the mixed Cu(II)/AN PAM system, they were even at 1.04 µm.

Mechanochemical synthesis of carbon-stabilized Cu/C, Co/C and Ni/C nanocomposites with prolonged resistance to oxidation.

Metal-carbon nanocomposites possess attractive physical-chemical properties compared to their macroscopic counterparts. They are important and unique nanosystems with applications including in the future development of nanomaterial enabled sensors, polymer fillers for electromagnetic radiation shields, and catalysts for various chemical reactions. However, synthesis of these nanocomposites typically employs toxic solvents and hazardous precursors, leading to environmental and health concerns. Together with the complexity of the synthetic processes involved, it is clear that a new synthesis route is required. Herein, Cu/C, Ni/C and Co/C nanocomposites were synthesized using a two-step method including mechanochemical treatment of polyethylene glycol and acetates of copper, nickel and cobalt, followed by pyrolysis of the mixtures in an argon flow at 700 °C. Morphological and structural analysis of the synthesized nanocomposites show their core-shell nature with average crystallite sizes of 50 (Cu/C), 18 (Co/C) and 20 nm (Ni/C) respectively. The carbon shell originates from disordered sp2 carbon (5.2-17.2 wt.%) with a low graphitization degree. The stability and prolonged resistance of composites to oxidation in air arise from the complete embedding of the metal core into the carbon shell together with the presence of surface oxide layer of metal nanoparticles. This approach demonstrates an environmentally friendly method of mechanochemistry for controllable synthesis of metal-carbon nanocomposites.