Recycling drainage effluents using reverse osmosis powered by photovoltaic solar energy in hydroponic tomato production: Environmental footprint analysis.

Greenhouse cultivation in the Mediterranean region has undoubtedly enhanced the economic growth and has generated social benefits by making an efficient use of resources. However, these production systems caused undesirable environmental impacts. In order to move towards cleaner production in greenhouse areas, this study has assessed the potential environmental benefits and trade-offs of the integration of an on-farm reverse osmosis system powered by photovoltaic solar energy to recycle the drainage effluents from greenhouses. To that end, we compare the environmental footprint of a greenhouse tomato crop using this technology in a hydroponic system (HS), versus the conventional sanded soil 'enarenado' (CS) with free-drainage to soil. Additionally, for comparison, three independent irrigation sources (desalinated seawater with low electrical conductivity and two different mixes of underground and desalinated water, with moderate and high electrical conductivity, respectively) were evaluated. The use of desalinated seawater can help reduce the overexploitation of aquifers, although if the desalination process is not done with clean energy it also comes with a negative impact on the carbon footprint. Life Cycle Assessment (LCA) was used to analyse and evaluate six environmental impact indicators associated with these production systems and water treatments. In addition, a sensitivity analysis was conducted to explore the potential environmental benefits of increasing the use of renewable energy for desalinated water production, whilst also curbing the common over-fertilisation malpractice reported in the study area. Based on our findings, the HS with leachate treatment technology showed, compared to the CS system, a significant reduction in the eutrophication (72 %), although it did inevitably increase the depletion of fossil fuels (43 %) global warming (37 %) and acidification (32 %) impacts, due to the need for additional infrastructure and equipment. Among the inputs considered for the cultivation systems, the greenhouse structure, and the production of fertilisers and electricity for fertigation represented the highest environmental burdens. When comparing the three irrigation treatments, it was observed that the partial substitution of desalinated seawater by brackish groundwater substantially mitigated (27 %) the global warming footprint. The sensitivity analysis revealed that a significant reduction in the environmental impact is feasible.

Impact of artificial monolayer application on stored water quality at the air-water interface.

Evaporation mitigation has the potential to significantly improve water use efficiency, with repeat applications of artificial monolayer formulations the most cost-effective strategy for large water storages. Field investigations of the impact of artificial monolayers on water quality have been limited by wind and wave turbulence, and beaching. Two suspended covers differing in permeability to wind and light were used to attenuate wind turbulence, to favour the maintenance of a condensed monolayer at the air/water interface of a 10 m diameter tank. An octadecanol formulation was applied twice-weekly to one of two covered tanks, while a third clean water tank remained uncovered for the 14-week duration of the trial. Microlayer and subsurface water samples were extracted once a week to distinguish impacts associated with the installation of covers, from the impact of prolonged monolayer application. The monolayer was selectively toxic to some phytoplankton, but the toxicity of hydrocarbons leaching from a replacement liner had a greater impact. Monolayer application did not increase water temperature, humified dissolved organic matter, or the biochemical oxygen demand, and did not reduce dissolved oxygen. The impact of an octadecanol monolayer on water quality and the microlayer may not be as detrimental as previously considered.