Synthesis, characterization and enhanced thermoelectric performance of structurally ordered cable-like novel polyaniline-bismuth telluride nanocomposite.

Bismuth telluride (Bi2Te3) nanorods and polyaniline (PANI) nanoparticles have been synthesized by employing solvothermal and chemical oxidative processes, respectively. Nanocomposites, comprising structurally ordered PANI preferentially grown along the surface of a Bi2Te3 nanorods template, are synthesized using in situ polymerization. X-ray powder diffraction, UV-vis and Raman spectral analysis confirm the highly ordered chain structure of PANI on Bi2Te3 nanorods, leading to a higher extent of doping, higher chain mobility and enhancement of the thermoelectric performance. Above 380 K, the PANI-Bi2Te3 nanocomposite with a core-shell/cable-like structure exhibits a higher thermoelectric power factor than either pure PANI or Bi2Te3. At room temperature the thermal conductivity of the composite is lower than that of its pure constituents, due to selective phonon scattering by the nanointerfaces designed in the PANI-Bi2Te3 nanocable structures. The figure of merit of the nanocomposite at room temperature is comparable to the values reported in the literature for bulk polymer-based composite thermoelectric materials.

Ionic ingress and charge-neutralization phenomena of conducting-polymer films.

Ionic ingress and diffusion through a conducting-polymer (CP) film containing embedded charges under potential and concentration gradients is studied. Electroneutrality, a common assumption in modeling of similar systems, is not justified in this case or similar diffusion-limited processes, as the timescale of ionic diffusion in the solid matrix is quite large. Counter ions therefore cannot move instantaneously for effective neutralization of excess charges. Poisson-Nernst-Planck (PNP) equations have to be solved for such cases without any simplifying assumption. Analytical solution shows the existence of a charge boundary layer, which limits and strongly influences the ionic flux. A general numerical method for solution is also developed for the dynamic modeling, analysis, and design of these types of systems. The numerical results are validated by comparison with analytical solutions as well as with some experimental results available in the literature. With this modeling framework, the basic features of controlled release of molecules across a CP film under an applied electrical potential can be explained quantitatively.

Pregnancy-induced haemophagocytic lymphohistiocytosis.

Haemophagocytic lymphohistiocytosis is an aggressive and life-threatening syndrome of excessive immune activation. It is associated with various aetiologies, including infections, collagen vascular diseases and malignancies. Pregnancy-induced immune dysregulation in genetically susceptible women may also play a critical role in haemophagocytic lymphohistiocytosis. Our case involves that of a 23-year-old pregnant woman who presented at 22 weeks gestation with tachycardia, swinging pyrexia, rigors and generalised myalgia. Refractory hypotension to intravenous fluids and rise in lactate level required admission to the intensive care unit for vasopressor support. Despite treatment with broad-spectrum antibiotics for presumed sepsis, she made little clinical improvement. Investigations for infection and rheumatological disease were unremarkable. A pronounced hyperferritinaemia, hypertriglyceridaemia and cytopenia raised the suspicion of haemophagocytic lymphohistiocytosis. Subsequent elevated CD25 levels helped establish the diagnosis. Treatment with corticosteroids and intravenous immunoglobulin provided a transient response in regard to temperature control and cardiovascular stability. The decision was made to treat her with anakinra, an interleukin-1 receptor antagonist. She responded well to this with a complete resolution of her symptoms and normalisation of her ferritin levels over the course of some weeks. Because of progressive slowing of foetal growth and abnormal umbilical artery Dopplers and cardiotocography, she eventually had an emergency caesarean section at 31 + 5 weeks. There were no foetal abnormalities.

Polyaniline/Reduced Graphene Oxide Composite-Enhanced Visible-Light-Driven Photocatalytic Activity for the Degradation of Organic Dyes.

Creation of an innovative composite photocatalyst, to advance its performance, has attracted researchers to the field of photocatalysis. In this article, a new photocatalyst based on polyaniline/reduced graphene oxide (PANI/RGO) composites has been prepared via the in situ oxidative polymerization method employing RGO as a template. For thermoelectric applications, though a higher percentage (50 wt %) of RGO has been used, for photocatalytic activity, lesser percentages (2, 5, and 8 wt %) of RGO in the composite have given a significant outcome. Furthermore, photoluminescence (PL) spectra, time-resolved fluorescence spectra, and Brunauer-Emmett-Teller surface area analyses confirmed the improved photocatalytic mechanism. PANI/RGO composites under visible light irradiation exhibit amazingly improved activity toward the degradation of cationic and anionic dyes in comparison with pristine PANI or RGO. Here, a PANI/RGO composite, with 5 wt % RGO(PG2), has emerged as the best combination with the degradation percentages of 99.68, 99.35, and 98.73 for malachite green, rhodamine B, and congo red within 15, 30, and 40 min, respectively. Experimental findings show that the introduction of RGO can relieve the agglomeration of PANI nanoparticles and enhance the light absorption of the materials due to an increased surface area. Moreover, the PG2 composite also showed excellent photocatalytic activity to reduce noxious Cr(VI). The effective removal of Cr(VI) up to 94.7% at pH 2 was observed within only 15 min. With the help of the active species trapping experiment, a plausible mechanism for the photocatalytic degradation has been proposed. The heightened activity of the as-synthesized composite compared to that of neat PANI or RGO was generally because of high concentrations of •OH radicals and partly of •O2 - and holes (h+) as concluded from the nitroblue tetrazolium probe test and photoluminescence experiment. It is hoped that the exceptional photocatalytic performance of our work makes the conducting polymer-based composite an effective alternative in wastewater treatment for industrial applications.

Nonlinear control of a multicomponent distillation process coupled with a binary distillation model as an EKF predictor.

The work is devoted to design the globally linearizing control (GLC) strategy for a multicomponent distillation process. The control system is comprised with a nonlinear transformer, a nonlinear closed-loop state estimator [extended Kalman filter (EKF)], and a linear external controller [conventional proportional integral (PI) controller]. The model of a binary distillation column has been used as a state predictor to avoid huge design complexity of the EKF estimator. The binary components are the light key and the heavy key of the multicomponent system. The proposed GLC-EKF (GLC in conjunction with EKF) control algorithm has been compared with the GLC-ROOLE [GLC coupled with reduced-order open-loop estimator (ROOLE)] and the dual-loop PI controller based on set point tracking and disturbance rejection performance. Despite huge process/predictor mismatch, the superiority of the GLC-EKF has been inspected over the GLC-ROOLE control structure.

Nonlinear model-based control algorithm for a distillation column using software sensor.

This paper presents the design of model-based globally linearizing control (GLC) structure for a distillation process within the differential geometric framework. The model of a nonideal binary distillation column, whose characteristics were highly nonlinear and strongly interactive, is used as a real process. The classical GLC law is comprised of a transformer (input-output linearizing state feedback), a nonlinear state observer, and an external PI controller. The tray temperature based short-cut observer (TTBSCO) has been used as a state estimator within the control structure, in which all tray temperatures were considered to be measured. Accordingly, the liquid phase composition of each tray was calculated online using the derived temperature-composition correlation. In the simulation experiment, the proposed GLC coupled with TTBSCO (GLC-TTBSCO) outperformed a conventional PI controller based on servo performances with and without measurement noise as well as on regulatory behaviors. In the subsequent part, the GLC law has been synthesized in conjunction with tray temperature based reduced-order observer (GLC-TTBROO) where the distillate and bottom compositions of the distillation process have been inferred from top and bottom product temperatures respectively, which were measured online. Finally, the comparative performance of the GLC-TTBSCO and the GLC-TTBROO has been addressed under parametric uncertainty and the GLC-TTBSCO algorithm provided slightly better performance than the GLC-TTBROO. The resulting control laws are rather general and can be easily adopted for other binary distillation columns.

Globally linearized control on diabatic continuous stirred tank reactor: a case study.

This paper focuses on the promise of globally linearized control (GLC) structure in the realm of strongly nonlinear reactor system control. The proposed nonlinear control strategy is comprised of: (i) an input-output linearizing state feedback law (transformer), (ii) a state observer, and (iii) an external linear controller. The synthesis of discrete-time GLC controller for single-input single-output diabatic continuous stirred tank reactor (DCSTR) has been studied first, followed by the synthesis of feedforward/feedback controller for the same reactor having dead time in process as well as in disturbance. Subsequently, the multivariable GLC structure has been designed and then applied on multi-input multi-output DCSTR system. The simulation study shows high quality performance of the derived nonlinear controllers. The better-performed GLC in conjunction with reduced-order observer has been compared with the conventional proportional integral controller on the example reactor and superior performance has been achieved by the proposed GLC control scheme.