RESUMO
OBJECTIVE: The purpose of this report is to compare satisfaction of patients rehabilitated with full-mouth fixed prostheses using computer-aided flapless implant placement and immediate loading with patients rehabilitated with conventional removable prostheses. MATERIALS AND METHODS: The study included 30 consecutive fully edentulous patients who received 312 implants and 30 matched controls treated with conventional removable prostheses. Mandible and maxilla were treated in the same surgical session with computer-guided flapless approach using NobelGuide protocol. Prefabricated screw-retained fixed prostheses were inserted at the end of surgery. Clinical and radiographic evaluations were assessed at 6, 12, and 36 months. At baseline and 5 years after prostheses delivery, patients answered OHIP-EDENT questionnaire (Oral Health Impact Profile for Edentulous subjects) to assess satisfaction. RESULTS: The implant survival rate was 97.9%, whereas the average marginal bone loss was 1.9 ± 1.3 mm after 3 years. At 6 months, patients showed significantly greater satisfaction with their fixed rehabilitation as compared to conventional dentures. CONCLUSIONS: The results of this study confirm that rehabilitation with a prefabricated fixed prosthesis supported by implants placed with NobelGuide protocol significantly increases the quality of life in fully edentulous patients when compared with complete dentures.
Assuntos
Prótese Total , Carga Imediata em Implante Dentário/métodos , Boca Edêntula/cirurgia , Retenção em Prótese Dentária/estatística & dados numéricos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Boca Edêntula/reabilitação , Boca Edêntula/terapia , Satisfação do Paciente , Qualidade de Vida , Estudos Retrospectivos , Inquéritos e QuestionáriosRESUMO
OBJECTIVE: The purpose of this report is to present the clinical outcomes and patients' satisfaction of full-mouth rehabilitation using computer-aided flapless implant placement and immediate loading of a prefabricated prosthesis. MATERIALS AND METHODS: The study included 30 consecutive fully edentulous patients who received 312 implants. Mandible and maxilla were treated in the same surgical session with computer-guided flapless approach using the NobelGuide protocol. Prefabricated screw-retained fixed prostheses were inserted at the end of surgery. Clinical and radiographic evaluations were assessed at 6, 12, and 36 months. At baseline and 6 months after surgery, patients answered Oral Health Impact Profile in Edentulous Adults questionnaire to assess satisfaction. RESULTS: The implant survival rate was 97.9%, whereas the average marginal bone loss was 1.9 ± 1.3 mm after 3 years. At 6 months, patients showed significantly greater satisfaction with their fixed rehabilitation when compared with conventional dentures. CONCLUSIONS: The results of this study confirm that rehabilitation with a prefabricated fixed prosthesis supported by implants placed with NobelGuide protocol is a viable and predictable treatment and increases patients' satisfaction and improves oral health-related quality of life.
Assuntos
Prótese Dentária Fixada por Implante/métodos , Arcada Edêntula/cirurgia , Saúde Bucal , Adulto , Planejamento de Prótese Dentária/métodos , Prótese Dentária Fixada por Implante/psicologia , Falha de Restauração Dentária/estatística & dados numéricos , Feminino , Humanos , Masculino , Saúde Bucal/estatística & dados numéricos , Satisfação do Paciente/estatística & dados numéricos , Cirurgia Assistida por Computador/métodos , Inquéritos e Questionários , Fatores de TempoRESUMO
Modern root-form endosseous dental implants have been used to successfully replace missing teeth for more than four decades. The implant industry has grown substantially during this time, with many hundreds of dental implant manufacturers providing components for clinicians around the globe. Increased acceptance of dental implants has greatly amplified the number of dental implants placed worldwide. As the dental implant patient population continues to age, long-term follow-up after implant placement has become increasingly important due to various factors associated with the condition and maintenance of implants placed. Although dental implants exhibit a high success rate as a medical device, their life expectancy may be limited depending on the patient's changing health, use of medications, lifestyle changes, nutrition, occlusal/bite issues, loss of additional teeth, experiences of trauma, lack of sufficient keratinized soft tissue, loss of bony support, and oral hygiene habits. When loss of soft-tissue coverage and/or bone occurs, the resultant inflammation surrounding the implant is known as peri-implantitis.
Assuntos
Perda do Osso Alveolar , Implantes Dentários , Peri-Implantite , Humanos , Peri-Implantite/etiologia , Peri-Implantite/prevenção & controle , Implantes Dentários/efeitos adversos , Implantação Dentária EndósseaRESUMO
OBJECTIVE: To describe a new procedure capable of coupling 2 data sets from cone beam computed tomography (CBCT) and an intraoral laser digital scanner to produce a stereolithographic model and surgical guide. METHODS: Use of DICOM (digital imaging and communications in medicine) format data obtained from CBCT scan images merged with standard triangulation language (STL) file data obtained from digital impressions using an intraoral laser scanner. The 2 data sets were electronically sent to a 3-dimensional imaging and technology software company over the Internet to fabricate a stereolithographic model of the jaws and surgical guide without the use of stone or plaster models obtained from traditional dental impressions. CONCLUSION: STL file data are able to accurately fabricate a stereolithographic model and surgical guide for implant surgery.
Assuntos
Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico/métodos , Implantação Dentária Endóssea , Processamento de Imagem Assistida por Computador/métodos , Lasers , Imagem Óptica/métodos , Interface Usuário-Computador , Implantação Dentária Endóssea/instrumentação , Implantes Dentários , Desenho de Equipamento , Humanos , Imageamento Tridimensional/métodos , Internet , Mandíbula/anatomia & histologia , Mandíbula/diagnóstico por imagem , Maxila/anatomia & histologia , Maxila/diagnóstico por imagem , Planejamento de Assistência ao Paciente , Estudos Prospectivos , Software , Cirurgia Assistida por Computador , Dente/anatomia & histologia , Dente/diagnóstico por imagemRESUMO
PURPOSE: The International Congress of Oral Implantologists has supported the development of this consensus report involving the use of Cone Beam Computed Tomography (CBCT) in implant dentistry with the intent of providing scientifically based guidance to clinicians regarding its use as an adjunct to traditional imaging modalities. MATERIALS AND METHODS: The literature regarding CBCT and implant dentistry was systematically reviewed. A PubMed search that included studies published between January 1, 2000, and July 31, 2011, was conducted. Oral presentations, in conjunction with these studies, were given by Dr. Erika Benavides, Dr. Scott Ganz, Dr. James Mah, Dr. Myung-Jin Kim, and Dr. David Hatcher at a meeting of the International Congress of Oral Implantologists in Seoul, Korea, on October 6-8, 2011. RESULTS: The studies published could be divided into four main groups: diagnostics, implant planning, surgical guidance, and postimplant evaluation. CONCLUSIONS: The literature supports the use of CBCT in dental implant treatment planning particularly in regards to linear measurements, three-dimensional evaluation of alveolar ridge topography, proximity to vital anatomical structures, and fabrication of surgical guides. Areas such as CBCT-derived bone density measurements, CBCT-aided surgical navigation, and postimplant CBCT artifacts need further research. ICOI RECOMMENDATIONS: All CBCT examinations, as all other radiographic examinations, must be justified on an individualized needs basis. The benefits to the patient for each CBCT scan must outweigh the potential risks. CBCT scans should not be taken without initially obtaining thorough medical and dental histories and performing a comprehensive clinical examination. CBCT should be considered as an imaging alternative in cases where the projected implant receptor or bone augmentation site(s) are suspect, and conventional radiography may not be able to assess the true regional three-dimensional anatomical presentation. The smallest possible field of view should be used, and the entire image volume should be interpreted.
Assuntos
Tomografia Computadorizada de Feixe Cônico/métodos , Implantação Dentária/métodos , Processo Alveolar/diagnóstico por imagem , Pontos de Referência Anatômicos/anatomia & histologia , Densidade Óssea/fisiologia , Cefalometria/métodos , Humanos , Imageamento Tridimensional/métodos , Arcada Osseodentária/diagnóstico por imagem , Planejamento de Assistência ao Paciente , Medição de Risco , Cirurgia Assistida por Computador/métodos , Resultado do TratamentoRESUMO
Through a CBCT-based team meeting, the surgical team, restorative dentist, and laboratory team member can better coordinate dental implant treatment on many levels. Once the desired restorative result has been established through conventional means, the information can then be transferred via a radiographic template during the scan acquisition. The type of implant, angulation, width and diameter of the implant, and need for grafting, can be determined with great accuracy. This effective exchange of information can take place during an online meeting at a convenient time for all parties. The treatment planning that is possible within the framework of this digital workflow defines the essence of a team approach to implant reconstruction. The protocol as described in part I of this 3-part series allows for improved diagnosis, treatment planning, and successful clinical outcomes. Part 2 of this series will focus on the surgical aspects of the team approach, in collaboration with the restorative clinician and diagnostic imaging center.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Implantação Dentária Endóssea/métodos , Implantes Dentários , Arcada Edêntula/diagnóstico por imagem , Seleção de Pacientes , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Humanos , Processamento de Imagem Assistida por Computador , Modelos Anatômicos , Planejamento de Assistência ao Paciente , Equipe de Assistência ao Paciente , Sistemas de Informação em RadiologiaAssuntos
Odontologia Geral/tendências , Tecnologia Odontológica/tendências , Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico , Implantação Dentária/tendências , Técnica de Moldagem Odontológica/tendências , Materiais Dentários , Restauração Dentária Permanente/tendências , Educação Continuada em Odontologia , Humanos , Imageamento Tridimensional/tendências , Radiografia Dentária Digital/tendênciasRESUMO
Edentulism and terminal dentition are still considered significant problems in the dental field, posing a great challenge for surgical and restorative solutions especially with immediate loading protocols. When the implant placement is planned immediately after extraction with irregular bone topography or there is an un-leveled alveolar ridge topography for any other reason, bone reduction may be required to level the alveolar crest in order to create the desired bone architecture allowing for sufficient bone width for implant placement and to insure adequate inter-arch restorative space. Bone reduction protocols exist in analog and digitally planned methodologies, with or without surgical guides to achieve the desired bone level based upon the desired position of the implants with regard to the restorative outcome. The objective of this paper was to scrutinize the literature regarding the practice of bone reduction in conjunction with implant placement, and to review different types of bone reduction surgical guides. Results: The literature reveals different protocols that provide for bone reduction with a variety of bone reduction methods. The digitally-planned surgical guide based on Cone-Beam computerized tomography (CBCT) scan reconstructed data can improve accuracy, reduce surgical time, and deliver the desired bone level for the implant placement with fewer surgical and restorative complications. The clinician's choice is based on personal experience, training, and comfort with a specific guide type. Conclusions: Bone reduction, when required, is an indispensable step in the surgical procedure to attain suitable width of bone in anticipation of implant placement ideally determined by the desired tooth position and required restorative space based on material selection for the chosen framework design, i.e., hybrid, monolithic zirconia. Additionally, bone reduction and implant placement can be accomplished in the same surgical procedure, minimizing trauma and the need for two separate interventions.
Assuntos
Cirurgia Assistida por Computador , Dente , Processo Alveolar , Tomografia Computadorizada de Feixe Cônico , Próteses e ImplantesAssuntos
Materiais Dentários/química , Prótese Dentária Fixada por Implante , Retenção de Dentadura/instrumentação , Prótese Total , Zircônio/química , Resinas Acrílicas/química , Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico/métodos , Ligas Dentárias/química , Implantação Dentária Endóssea/métodos , Relações Dentista-Paciente , Planejamento de Dentadura , Retenção de Dentadura/métodos , Prótese Total Imediata , Humanos , Carga Imediata em Implante Dentário , Anamnese , Planejamento de Assistência ao Paciente , Participação do Paciente , Exame Físico , Tomografia Computadorizada por Raios X/métodos , Resultado do TratamentoRESUMO
PURPOSE: This study introduces a novel protocol for the placement of zygomatic implants utilizing presurgical planning with 3-dimensional (3D) computed tomography (CT)/cone-beam (CB)CT diagnostic technologies and advanced 3D printing through the development of a specific surgical guide. MATERIALS AND METHODS: The protocol relied on large field of view CT/CBCT for an accurate assessment of the maxillary arch to plan zygomatic implant receptor sites. CT/CBCT-derived surgical guides of a novel design were then fabricated using 3D printing technology. An exact replica of the entire maxilla and zygomatic bone was then fabricated in actual scale model size to allow for a simulation of the operation using replicas of implants to be used during the surgical intervention. Guidance was also provided for the sinus fenestration as part of the surgical template. Four patients received a total of 10 zygomatic implants all placed by the same surgeon. RESULTS: Preoperative positions of the zygomatic implants were compared with the postoperative implant positions by merging the pre- and postoperative CT scan datasets. The degree of accuracy of the superimposition was measured utilizing sophisticated software. Apical, coronal, and angular deviations were determined for each implant. Deviations from the computerized project to the actual implant positions ranged from 2 mm to 3 mm with angular deviations ranging between 1.88 and 4.55 degrees. CONCLUSIONS: Placement of zygomatic implants requires surgical experience due to close proximity of vital anatomical structures. This study used methods of superimposition that illustrated satisfactory correspondence between inserted implants and the virtual plan. No adjacent vital anatomical structures were damaged. The novel surgical guide design afforded the surgeon visual control of the drilling protocol. Positioning the guide in close proximity to the entry point of the zygomatic body aided control of the drills up to the vicinity of the exit point, significantly limiting problems associated with angular deviation. Reducing errors and complications is essential for zygomatic implants to remain a viable treatment alternative, and further research on a guided approach to their placement is encouraged.
Assuntos
Implantes Dentários , Cirurgia Assistida por Computador/métodos , Zigoma/cirurgia , Tomografia Computadorizada de Feixe Cônico , Humanos , Imageamento Tridimensional , Maxila/cirurgiaRESUMO
CT and cone-beam CT technology provides clinicians with new methods to view patient anatomy exceeding conventional two-dimensional radiology. Interactive software applications allow for improved interpretation of the CT scan data. Proper use of this new technology must be based on a solid foundation of fundamental surgical and prosthodontic protocols. Advances in software and associated hardware have empowered clinicians with the necessary tools to harness the technology, while remaining true to conventional standards. The enhanced capability of innovative software applications that allow clinicians to interpret and maneuver through various three-dimensional images has far-reaching implications when interactive treatment planning software is combined with computer-aided design and manufacturing. Using all available virtual tools, true restoratively driven implant dentistry can be accomplished, ultimately benefiting patients.
Assuntos
Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico/métodos , Tomografia Computadorizada por Raios X/métodos , Perda do Osso Alveolar/diagnóstico por imagem , Perda do Osso Alveolar/cirurgia , Implantação Dentária Endóssea/instrumentação , Implantação Dentária Endóssea/métodos , Implantes Dentários , Planejamento de Dentadura , Prótese Total Inferior , Humanos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Masculino , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Nervo Mandibular/diagnóstico por imagem , Pessoa de Meia-Idade , Osteotomia/métodos , Planejamento de Assistência ao Paciente , Doenças Periodontais/diagnóstico por imagem , Doenças Periodontais/cirurgia , Software , Cirurgia Assistida por Computador/métodos , Tecnologia Radiológica , Extração Dentária/métodos , Interface Usuário-ComputadorRESUMO
An emerging technology that encompasses computed tomography, cone-beam computed tomography, and interactive software applications has slowly progressed and evolved into a necessary tool for diagnosis, treatment planning, and delivery of dental implant and associated restorative and surgical procedures. The integration of these innovative tools is helping to define new methods for appreciating anatomy, improving accuracy, and enhancing presurgical prosthetic planning to achieve true restorative-driven implant dentistry. This article will demonstrate how computed tomography combined with interactive virtual treatment-planning software applications can empower clinicians with enhanced diagnostic capabilities for implant receptor-site assessment, generating new paradigms that eventually may supersede older methods of presurgical planning for dental implant reconstruction.
Assuntos
Anodontia/terapia , Tomografia Computadorizada de Feixe Cônico , Implantação Dentária Endóssea , Implantes Dentários , Incisivo/anormalidades , Planejamento de Assistência ao Paciente , Tomografia Computadorizada por Raios X , Interface Usuário-Computador , Adolescente , Densidade Óssea , Transplante Ósseo , Desenho Assistido por Computador , Coroas , Árvores de Decisões , Dente Suporte , Implantação Dentária Endóssea/instrumentação , Implantação Dentária Endóssea/métodos , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Humanos , Processamento de Imagem Assistida por Computador , Imageamento Tridimensional , Masculino , Procedimentos Cirúrgicos Pré-Protéticos Bucais , Radiografia PanorâmicaAssuntos
Planejamento de Prótese Dentária , Retenção em Prótese Dentária/instrumentação , Prótese Dentária Fixada por Implante , Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico , Porcelana Dentária , Revestimento de Dentadura , Feminino , Humanos , Pessoa de Meia-Idade , ZircônioRESUMO
A novel approach to predict implant placement utilizing CT-derived model-based surgery was performed for a maxillary-anterior aesthetic immediate extraction/immediate restoration; root proximity and inter-implant positioning was an additional complication. The use of state-of-the-art diagnostic and treatment-planning tools described in this article has been shown to be effective for both partial and completely edentulous patient presentations. These tools can serve as a foundation for accurate, highly practical, and repeatable CT-scan-derived model-based presurgical prosthetic planning for the immediate loading of dental implants.
Assuntos
Implantação Dentária Endóssea/métodos , Prótese Dentária Fixada por Implante , Arcada Parcialmente Edêntula/diagnóstico por imagem , Modelos Anatômicos , Cirurgia Assistida por Computador , Adulto , Prótese Parcial Imediata , Feminino , Humanos , Incisivo/lesões , Maxila/diagnóstico por imagem , Modelos Dentários , Tomografia Computadorizada por Raios X , Avulsão DentáriaAssuntos
Tomografia Computadorizada de Feixe Cônico/métodos , Desenho Assistido por Computador , Humanos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Planejamento de Assistência ao Paciente , Software , Tecnologia Odontológica , Tecnologia RadiológicaAssuntos
Comunicação , Tomografia Computadorizada de Feixe Cônico/métodos , Implantação Dentária Endóssea/métodos , Odontólogos , Equipe de Assistência ao Paciente , Cirurgia Bucal , Densidade Óssea/fisiologia , Transplante Ósseo , Implantes Dentários , Estética Dentária , Gengiva/patologia , Humanos , Anamnese , Planejamento de Assistência ao Paciente , Software , Tomografia Computadorizada por Raios X , Sítio Doador de TransplanteAssuntos
Comunicação , Tomografia Computadorizada de Feixe Cônico/métodos , Implantação Dentária Endóssea/métodos , Planejamento de Assistência ao Paciente , Equipe de Assistência ao Paciente , Tomografia Computadorizada por Raios X/métodos , Cimentação/métodos , Desenho Assistido por Computador , Tomada de Decisões , Projeto do Implante Dentário-Pivô , Implantação Dentária Endóssea/economia , Materiais Dentários/química , Prótese Dentária Fixada por Implante , Relações Dentista-Paciente , Planejamento de Dentadura , Retenção de Dentadura/instrumentação , Retenção de Dentadura/métodos , Financiamento Pessoal , Humanos , Consentimento Livre e Esclarecido , Participação do Paciente , Titânio/química , Zircônio/químicaRESUMO
BACKGROUND: The "root membrane" (RM) is a technique that has become popular among implantologists for placement of immediate implants in the anterior maxilla. PURPOSE: To present histologic evidence of an immediate implant placed in the human anterior maxilla, according to the RM technique, and retrieved after five years. METHODS: A fixture, along with the surrounding tissues, was retrieved from the anterior maxilla of a 68-year-old patient, who had been treated five years earlier with immediate implant placement and RM technique. The specimen was processed for histologic/histomorphometric evaluation. RESULTS: The buccal bone plate was maintained without any resorption; a healthy periodontal ligament was evidenced. The implant showed osseointegration, with a high percentage of bone-to-implant contact (BIC = 76.2%). With regard to the space between the RM and the implant, the apical and medial thirds were filled with compact, mature bone; the coronal third was colonized by noninfiltrated connective tissue. CONCLUSIONS: The RM technique appears to be effective in preventing bone resorption of the buccal bone plate of the human anterior maxilla, five years after the placement of an immediate implant.
Assuntos
Implantação Dentária Endóssea/métodos , Implantes Dentários , Maxila/cirurgia , Raiz Dentária/cirurgia , Planejamento de Prótese Dentária/métodos , Humanos , Masculino , Pessoa de Meia-Idade , Osseointegração/fisiologia , Ligamento Periodontal/fisiopatologia , Ligamento Periodontal/cirurgiaRESUMO
PURPOSE: Current implant systems with screw-retained abutments permit direct laboratory fabrication of castings. Computer aided drafting systems further enhance the fabrication of computer-milled abutments (CMAs) and castings. The purpose of this study was to compare marginal accuracy, as measured by gap size, of castings made directly on CMAs with those made indirectly on epoxy and stone dies. MATERIALS AND METHODS: Castings were made directly for 10 CMAs. Marginal gap measurements were made with the castings seated on the abutments (group A). Castings were also made indirectly on stone and epoxy dies obtained from impressions of the abutments. Marginal gap measurements were made with these indirectly made castings seated on their CMAs (groups B and E). In addition, the directly made castings were transferred between CMAs and marginal gap measurements made (group D). Marginal gap measurements of the groups were compared with analysis of variance (ANOVA) and pair-wise comparisons (Scheffé test). RESULTS: Groups A and D had marginal gaps of less than 100 microm. These marginal gaps were significantly smaller (P < .05) than the gaps of groups B and E, made on dies, which were approximately 200 to 500 microm. DISCUSSION AND CONCLUSIONS: With CMAs, it is possible to make an exact duplicate of the abutment. This permits the laboratory to make castings on duplicate abutments with greater precision than can be obtained using the indirect technique. Direct fabrication of castings resulted in smaller marginal gaps, which in turn allows a better marginal seal and improved retention of castings.