Direct de/carboxylation of cannabidiolic acid (CBDA) and cannabidiol (CBD) from hemp plant material under supercritical CO2.

Many organic reactions rely on CO2 sources to generate important structural units and valuable chemicals. In this study, we compared the effects of cannabidiol (CBD) and cannabidiolic acid (CBDA) on the supercritical CO2 (scCO2)-induced de/carboxylation reaction. The results showed that CBD was directly carboxylated in the ortho-position to form CBDA with up to 62% conversion. Meanwhile, CBDA decarboxylation occurred on hemp plant material via varying composition. Mechanistic studies revealed that CBD carboxylation was influenced not only by the physical properties of scCO2, but also by the vegetable matrix.

Amino-Functionalized Lead Phthalocyanine-Modified Benzoxazine Resin: Curing Kinetics, Thermal, and Mechanical Properties.

Phenol-diaminodiphenylmethane-based benzoxazine (P-ddm)/phthalocyanine copolymer was prepared by using P-ddm resin as matrix and 3,10,17,24-tetra-aminoethoxy lead phthalocyanine (APbPc) as additive. Fourier-transform infrared (FTIR), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA) were used to investigate the curing behavior, curing kinetics, dynamic mechanical properties, thermal stability, and impact strength of the prepared copolymers. The kinetic parameters for the P-ddm/APbPc blend curing processes were examined by utilizing the iso-conversional, Flynn-Wall-Ozawa, and Málek methods. The P-ddm/APbPc blends exhibit two typical curing processes, and DSC results confirmed that the blending of APbPc monomer can effectively reduce the curing temperature of P-ddm resin. The autocatalytic models also described the non-isothermal curing reaction rate well, and the appropriate kinetic parameters of the curing process were obtained. The DMA and impact strength experiments proved that the blending of APbPc monomer can significantly improve the toughness and stiffness of P-ddm resin, the highest enhancements were observed on 25 wt.% addition of APbPc, the recorded values for the storage modulus and impact strength were 1003 MPa and 3.60 kJ/m2 higher, respectively, while a decline of 24.6 °C was observed in the glass transition temperature values. TGA curves indicated that the cured copolymers also exhibit excellent thermal stabilities.