Tailoring Catalysis of Encapsulated Pt Nanoparticles by Pore Wall Engineering of Covalent Organic Frameworks.

While supported metal nanoparticles (NPs) have shown significant promise in heterogeneous catalysis, precise control over their interaction with the support, which profoundly impacts their catalytic performance, remains a significant challenge. In this study, Pt NPs are incorporated into thioether-functionalized covalent organic frameworks (denoted COF-Sx), enabling precise control over the size and electronic state of Pt NPs by adjusting the thioether density dangling on the COF pore walls. Notably, the resulting Pt@COF-Sx demonstrate exceptional selectivity (>99%) in catalytic hydrogenation of p-chloronitrobenzene to p-chloroaniline, in sharp contrast to the poor selectivity of Pt NPs embedded in thioether-free COFs. Furthermore, the conversion over Pt@COF-Sx exhibits a volcano-type curve as the thioether density increases, due to the corresponding change of accessible Pt sites. This work provides an effective approach to regulating the catalysis of metal NPs via their microenvironment modulation, with the aid of rational design and precise tailoring of support structure.

Dual Microenvironment Modulation of Pd Nanoparticles in Covalent Organic Frameworks for Semihydrogenation of Alkynes.

The chemical microenvironment modulation of metal nanoparticles (NPs) holds promise for tackling the long-lasting challenge of the trade-off effect between activity and selectivity in catalysis. Herein, ultrafine PdCu2 NPs incorporated into covalent organic frameworks (COFs) with diverse groups on their pore walls have been fabricated for the semihydrogenation of alkynes. The Cu species, as the primary microenvironment of Pd active sites, greatly improves the selectivity. The functional groups as the secondary microenvironment around PdCu2 NPs effectively regulate the activity, in which PdCu2 NPs encapsulated in the COF bearing -CH3 groups exhibit the highest activity with >99 % conversion and 97 % selectivity. Both experimental and calculation results suggest that the functional group affects the electron-donating ability of the COFs, which successively impacts the charge transfer between COFs and Pd sites, giving rise to a modulated Pd electronic state and excellent catalytic performance.

Selectivity Control in the Direct CO Esterification over Pd@UiO-66: The Pd Location Matters.

The selectivity control of Pd nanoparticles (NPs) in the direct CO esterification with methyl nitrite toward dimethyl oxalate (DMO) or dimethyl carbonate (DMC) remains a grand challenge. Herein, Pd NPs are incorporated into isoreticular metal-organic frameworks (MOFs), namely UiO-66-X (X=-H, -NO2 , -NH2 ), affording Pd@UiO-66-X, which unexpectedly exhibit high selectivity (up to 99 %) to DMC and regulated activity in the direct CO esterification. In sharp contrast, the Pd NPs supported on the MOF, yielding Pd/UiO-66, displays high selectivity (89 %) to DMO as always reported with Pd NPs. Both experimental and DFT calculation results prove that the Pd location relative to UiO-66 gives rise to discriminated microenvironment of different amounts of interface between Zr-oxo clusters and Pd NPs in Pd@UiO-66 and Pd/UiO-66, resulting in their distinctly different selectivity. This is an unprecedented finding on the production of DMC by Pd NPs, which was previously achieved by Pd(II) only, in the direct CO esterification.

Optimizing Pt Electronic States through Formation of a Schottky Junction on Non-reducible Metal-Organic Frameworks for Enhanced Photocatalysis.

Charge transfer between metal sites and supports is crucial for catalysis. Redox-inert supports are usually unfavorable due to their less electronic interaction with metal sites, which, we demonstrate, is not always correct. Herein, three metal-organic frameworks (MOFs) are chosen to mimic inert or active supports for Pt nanoparticles (NPs) and the photocatalysis is studied. Results demonstrate the formation of a Schottky junction between Pt and the MOFs, leading to the electron-donation effect of the MOFs. Under light irradiation, both the MOF electron-donation effect and Pt interband excitation dominate the Pt electron density. Compared with the "active" UiO-66 and MIL-125 supports, Pt NPs on the "inert" ZIF-8 exhibit higher electron density due to the higher Schottky barrier, resulting in superior photocatalytic activity. This work optimizes metal catalysts with non-reducible supports, and promotes the understanding of the relationship between the metal-support interaction and photocatalysis.

Facet Engineering of a Metal-Organic Framework Support Modulates the Microenvironment of Palladium Nanoparticles for Selective Hydrogenation.

The exposed facets of supported catalysts play a crucial role in catalysis; however, they are usually ignored and related studies remain rare. Herein, we have fabricated a series of sandwich-structured metal-organic framework composites, denoted ZIF-8X @Pd@ZIF-8 (x represents the morphology of ZIF-8 core, i.e., ZIF-8C exposing (100) facet, ZIF-8RD exposing (110) facet, and ZIF-8TRD exposing mixed (100) and (110) facets), featuring Pd nanoparticles deposited on the specific crystal facets of ZIF-8 core, for hydrogenation of p-chloronitrobenzene. The Pd electronic state is tailored by the ZIF-8 core, where more electron-deficient Pd is found in ZIF-8C @Pd@ZIF-8 than that in ZIF-8RD @Pd@ZIF-8, leading to discriminative adsorption of the -NO2 and -Cl groups of p-chloronitrobenzene. Consequently, ZIF-8C @Pd@ZIF-8 exhibits excellent activity (97.6 %) and selectivity (98.1 %) to p-chloroaniline. This work highlights crystal facet engineering of supports to modulate the microenvironment and electronic state of supported metal nanoparticles, offering a promising avenue to enhanced catalysis.

Trifunctional Metal-Organic Framework Catalyst for CO2 Conversion into Cyclic Carbonates.

Herein, we reported a facile strategy for the preparation of trifunctional ionic metal-organic frameworks (MOFs) incorporating imidazolium cation functionalities. This strategy exploits the Debus-Radziszewski reaction to create the cationic imidazole ring by postsynthetic modification, meanwhile introducing exchangeable counteranions. On the basis of this strategy, MIL-101-IMOH-Br- has been synthesized, which combines Lewis acidic sites, Brønsted acidic sites, and nucleophilic centers to achieve catalysis for the carbon dioxide-epoxide cycloaddition into cyclocarbonate without any cocatalyst and solvent.

Superhydrophobic/Superoleophilic MOF Composites for Oil-Water Separation.

A universal strategy is developed to construct metal-organic framework (MOF)-based superhydrophobic/superoleophilic materials by the reaction of activated MOFs and octadecylamine. In particular, S-MIL-101(Cr) composite can efficiently separate chloroform, toluene, petroleum ether, and n-hexane from water with excellent oil-water separation performance, with potential application in the environmental field.

Robust Bifunctional Core-Shell MOF@POP Catalyst for One-Pot Tandem Reaction.

A new bifunctional acid-base catalyst, core-shell UiO-66@SNW-1, with robust chemical and thermal stability, recyclability, and durable catalytic activity is synthesized by a convenient, universal strategy. Interestingly, this hybrid material can effectively catalyze deacetalization-Knoevenagel condensation reaction in the presence of excellent compartmentalization to spatially isolate opposing acid-base sites.

Robust Bifunctional Lanthanide Cluster Based Metal-Organic Frameworks (MOFs) for Tandem Deacetalization-Knoevenagel Reaction.

A series of 12-connected lanthanide cluster based metal-organic frameworks (MOFs) have been constructed by [Ln6(µ3-OH)8(COO-)12] secondary building units (SBUs) and 2-aminobenzenedicarboxylate (BDC-NH2) ligands. These obtained materials exhibit high chemical stability and generic thermal stability, especially in acidic and basic conditions. They also present commendable CO2 adsorption capacity, and Yb-BDC-NH2 was further confirmed by a breakthrough experiment under both dry and wet conditions. Moreover, these materials possess both Lewis acid and Brønsted base sites that can catalyze one-pot tandem deacetalization-Knoevenagel condensation reactions.

Microporous Hexanuclear Ln(III) Cluster-Based Metal-Organic Frameworks: Color Tunability for Barcode Application and Selective Removal of Methylene Blue.

Two hexanuclear Ln(III) cluster-based metal-organic frameworks (MOFs) (Ln = Tb or Eu) and a series of isomorphic bimetallic Ln(III)-MOFs have been synthesized by changing the ratio of Tb(III) and Eu(III) under solvothermal conditions. The excellent linear color tunability (from green to red) makes them suitable for barcode application. In addition, the anionic Ln(III)-MOFs exhibit superior uptake capacity toward methylene blue (MB+) by an ion-exchange process, and its reversible adsorption performance makes 1 suitable for removal of organic dye MB+. The as-prepared anionic hexanuclear Ln(III) cluster-based MOFs can serve as a multifunctional material for an optical and environmental area.

Superhydrophobic MOF/polymer composite with hierarchical porosity for boosting catalytic performance in an humid environment.

The poor hydrostability of most reported metal-organic frameworks (MOFs) has become a daunting challenge in their practical applications. Recently, MOFs combined with multifunctional polymers can act as a functional platform and exhibit unique catalytic performance; they can not only inherit the outstanding properties of the two components but also offer unique synergistic effects. Herein, an original porous polymer-confined strategy has been developed to prepare a superhydrophobic MOF composite to significantly enhance its moisture or water resistance. The selective nucleation and growth of MOF nanocrystals confined in the pore of PDVB-vim are closely related to the structure-directing and coordination-modulating properties of PDVB-vim. The resultant MOF/PDVB-vim composite not only produces superior superhydrophobicity without significantly disturbing the original features but also exhibits a novel catalytic activity in the Friedel-Crafts alkylation reaction of indoles with trans-ß-nitrostyrene because of the accessible sites and synergistic effects.

Superhydrophobic MOFs with enhanced catalytic activity for chemical fixation of CO2.

A general approach to prepare superhydrophobic MOFs (denoted as MOFs-CF3) through a post-decorating strategy for highly efficient chemical fixation of CO2 was demonstrated. The enhanced catalytic activity of MOFs-CF3 is attributed to a synergistic effect between the Lewis acid sites of MOFs and modification of the electron-withdrawing trifluoromethyl group, which resulted in a high CO2 enrichment capacity. The possible mechanism of cycloaddition catalyzed by the MOFs-CF3 catalyst was also proposed.

Bioinspired microenvironment modulation of metal-organic framework-based catalysts for selective methane oxidation.

Inspiration from natural enzymes enabling creationary catalyst design is appealing yet remains extremely challenging for selective methane (CH4) oxidation. This study presents the construction of a biomimetic catalyst platform for CH4 oxidation, which is constructed by incorporating Fe-porphyrin into a robust metal-organic framework, UiO-66, furnished with saturated monocarboxylic fatty acid bearing different long alkyl chains. The catalysts demonstrate the high efficiency in the CH4 to methanol (CH3OH) conversion at 50 °C. Moreover, the selectivity to CH3OH can be effectively regulated and promoted through a fine-tuned microenvironment by hydrophobic modification around the Fe-porphyrin. The long-chain fatty acids anchored on the Zr-oxo cluster of UiO-66 can not only tune the electronic state of the Fe sites to improve CH4 adsorption, but also restrict the amount of H2O2 around the Fe sites to reduce the overoxidation. This behavior resembles the microenvironment regulation in methane monooxygenase, resulting in high CH3OH selectivity.

[Research on the influence of infrared spectral resolution on gas quantitative analysis].

Spectra with different resolution (1, 2, 4 and 8 cm(-1)) of samples with combined CO/CO2/NO were used to build models for quantitative analysis of each component. Using these models, the influence of spectral resolution on gas quantitative analysis was studied. Research data show that for each component there is a best competent resolution for its quantitative analysis. And the quantitative analysis of all involved components has good calibration accuracy with higher resolution (1/2 cm(-1)) and lower resolution (8 cm(-1)), giving the relatively high mean of correlation coefficient of each component (r) more than 0.999 5, and the mean of root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) of each component below 18.36 and 15.43 respectively, but the calibration accuracy of the model with moderate resolution of 4 cm(-1) dropped sharply, giving the mean of correlation coefficient of each component (r) of 0.989 66,and the mean of root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) of each component of 90.37 and 64.33 respectively. These results demonstrate that the spectral resolution has an important effect on the calibration accuracy of gas quantitative analysis model and the successful application of FTIR As can be seen, the accuracy of gas quantitative analysis is highly dependent on the proper selection of spectral resolution. In order to improve the accuracy of gas quantitative analysis, it is very important to select suitable spectral resolution depending on different components and various application situations.

A highly stable nanofibrous Eu-MOF membrane as a convenient fluorescent test paper for rapid and cyclic detection of nitrobenzene.

A stable fluorescent nanofibrous membrane was fabricated by in situ growing Eu-MOF crystals on electrospun polyacrylonitrile nanofibers modified with γ-aminobutyric acid. This nanofibrous membrane can be used as a convenient fluorescent test paper for rapid and cyclic detection of nitrobenzene.

An exceptionally stable core-shell MOF/COF bifunctional catalyst for a highly efficient cascade deacetalization-Knoevenagel condensation reaction.

A novel strategy has been developed to construct a highly stable core-shell MOF@COF (PCN-222-Co@TpPa-1) bifunctional catalyst through strong π-π stacking interaction. This hybrid material with spatially isolated antagonistic acid-base sites can effectively catalyze the deacetalization-Knoevenagel condensation cascade reaction.