RESUMO
Continuous rotation of a fragile, photosensitive microrod in a safe, flexible way remains challenging in spite of its importance to microelectro-mechanical systems. We propose a photovoltaic strategy to continuously rotate a fragile, fluorescent microrod on a LiNbO3/Fe (LN/Fe) substrate using a continuous wave visible (473 nm) laser beam with an ultralow power (few tens of µW) and a simple structure (Gaussian profile). This strategy does not require the laser spot to cover the entire microrod nor does it result in a sharp temperature rise on the microrod. Both experiments and simulation reveal that the strongest photovoltaic field generated beside the laser spot firmly traps one corner of the microrod and the axisymmetric photovoltaic field exerts an electrostatic torque on the microrod driving it to rotate continuously around the laser spot. The dependence of the rotation rate on the laser power indicates contributions from both deep and shallow photovoltaic centers. This rotation mode, combined with the transportation mode, enables the controllable movement of an individual microrod along any complex trajectory with any specific orientation. The tuning of the end-emitting spectrum and the photothermal cutting of the fluorescent microrod are also realized by properly configuring the laser illumination. By taking a microrod as the emitter and a polystyrene microsphere as the focusing lens, we demonstrate the photovoltaic assembly of a microscale light-source system with both spectrum and divergence-angle tunabilities, which are realized by adjusting the photoexcitation position along the microrod and the geometry relationship in the system, respectively.