RESUMO
AIM: Oligodontia (OD) is a rare developmental condition characterized by the absence of six or more teeth. Dental implant placement may be challenging due to anatomical factors. This study aims to evaluate the alveolar bone dimensions in OD patients compared with controls. MATERIALS AND METHODS: On maxillary and mandibular cone-beam computed tomography (CBCT), bone height and width were measured at every tooth and edentulous site. The distance to the inferior alveolar nerve was also measured. Fifty-three OD patients (40 maxillary and 32 mandibular CBCT) and 82 controls (51 maxillary and 31 mandibular CBCT) were compared using mixed models. RESULTS: Compared with those in OD patients, maxillary permanent teeth and edentulous sites showed significantly higher mean height in control patients (incisive-canine site height: +2.12 mm; edentulous incisive-canine site height: +4.46 mm [p > .001]). For the mandibular permanent teeth, mean height was higher in controls than in OD patients at the incisive-canine (+3.82 mm [p > .001]) and premolar areas (+2.06 mm [p > .001]). Only edentulous incisive-canine sites were significantly different between controls and OD patients (mean: +0.52 mm [p > .001]). Changes in alveolar nerve position were observed in case of molar agenesis. CONCLUSION: Maxillary and mandibular bone dimensions are reduced in OD patients compared with controls both in sites with permanent teeth and in edentulous areas.
Assuntos
Boca Edêntula , Tomografia Computadorizada de Feixe Cônico Espiral , Humanos , Estudos Retrospectivos , Mandíbula/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Maxila/diagnóstico por imagemRESUMO
STATEMENT OF PROBLEM: Cleft lip and palate are the most frequent congenital anomalies of the face and are often linked with lateral incisor agenesis. The therapeutic decision on whether and how to replace the lateral incisors is not straightforward, and a decision-making tree is needed. PURPOSE: The purpose of this systematic review was to evaluate the available literature reporting on treatments for the replacement of missing lateral incisors in cleft areas. By analyzing the success and survival rates of these treatments, a decision-making tree was developed. MATERIAL AND METHODS: The literature search was performed on the PubMed (MEDLINE), Web of Science, Cochrane, EMBASE, Dentistry of Oral and Science Source, and Google Scholar databases and was based on the question: Which treatment for patients with lateral incisor agenesis and cleft lip and palate has a good success rate? RESULTS: Twenty-six articles were included in this systematic review. A meta-analysis was performed on 14 articles (20 case series, 6 case controls). The estimated overall 5-year survival rates were 96.4% for implant-supported prostheses. CONCLUSIONS: Different treatment options are available, depending on the clinical situation. If the patient meets the conditions for implant placement, this treatment remains a preferred solution. If the prosthetic space is reduced, orthodontic space closure and composite resin restorations are possible. When these options are not possible, a resin-bonded fixed partial denture is the preferred option. If the teeth adjacent to the edentulous area require extensive restorations, a fixed partial denture may be a suitable alternative.
RESUMO
Dental anomalies occur frequently in a number of genetic disorders and act as major signs in diagnosing these disorders. We present definitions of the most common dental signs and propose a classification usable as a diagnostic tool by dentists, clinical geneticists, and other health care providers. The definitions are part of the series Elements of Morphology and have been established after careful discussions within an international group of experienced dentists and geneticists. The classification system was elaborated in the French collaborative network "TÊTECOU" and the affiliated O-Rares reference/competence centers. The classification includes isolated and syndromic disorders with oral and dental anomalies, to which causative genes and main extraoral signs and symptoms are added. A systematic literature analysis yielded 408 entities of which a causal gene has been identified in 79%. We classified dental disorders in eight groups: dental agenesis, supernumerary teeth, dental size and/or shape, enamel, dentin, dental eruption, periodontal and gingival, and tumor-like anomalies. We aim the classification to act as a shared reference for clinical and epidemiological studies. We welcome critical evaluations of the definitions and classification and will regularly update the classification for newly recognized conditions.
Assuntos
Terminologia como Assunto , Anormalidades Dentárias/classificação , Anormalidades Dentárias/genética , Dente/patologia , Pontos de Referência Anatômicos , Predisposição Genética para Doença , Humanos , Cooperação Internacional , Mucosa Bucal/patologia , Radiografia Panorâmica , Dente/diagnóstico por imagem , Anormalidades Dentárias/diagnóstico por imagem , Dente Supranumerário/diagnóstico por imagemRESUMO
METHODOLOGY: Gingival conditions and tooth sensitivity of young patients with amelogenesis imperfecta lack in depth studies. This case-control study aimed to compare (1) the gingival inflammation, the presence of enamel defects, and tooth sensitivity in young patients with and without amelogenesis imperfecta and (2) to investigate if any difference exists between subtypes of amelogenesis imperfecta. We compared forty-two participants with amelogenesis imperfecta with forty-two controls matched for age, gender, and the number of examined sites. Based on interview, clinical examination, and intraoral photography, we collected data on periodontal conditions, enamel defects and the presence of tooth sensitivity. Comparison tests were performed to investigate if any difference existed between cases and controls; and among cases, between the different subtypes of amelogenesis imperfecta. We performed a post-hoc analysis for any significant difference observed. RESULTS: We observed more gingival inflammation, enamel defects and tooth sensitivity among cases (all p<0.05). Participants with hypocalcified amelogenesis imperfecta had more gingival inflammation, enamel defects, and tooth sensitivity than patients with the hypoplastic and hypomature subtypes (all p<0.05). After adjustment for dental plaque, gingival inflammation was associated with the presence of amelogenesis imperfecta (OR (95%CI) = 1.14 (1.05; 1.24). p<0.01). CONCLUSION: Gingival inflammation, enamel defect and tooth sensitivity are more frequently observed among young patients with amelogenesis imperfecta, and more specifically among children with the hypocalcified subtype.
Assuntos
Amelogênese Imperfeita/epidemiologia , Sensibilidade da Dentina/epidemiologia , Estudos de Casos e Controles , Criança , Esmalte Dentário , Feminino , Humanos , Inflamação , MasculinoRESUMO
Through his/her knowledge of cranio-facial growth, the orthodontist plays a leading role within the multidisciplinary team that tracks and treats sleep-disordered breathing (SDB) in children. Correction of craniofacial risk factors (maxillary deficiency and retrognathia) is commonly used by practitioners alongside orthodontic treatment such as OMA and RME in the optimal conditions afforded by childhood growth. Myofunctional therapies are performed to restore correct stomatognathic function and play a central role in the management of SDB in children. The orthodontist is therefore a key player in the medical treatment chain of these children.
RESUMO
BACKGROUND: Sleep-disordered breathing (SDB), including obstructive sleep apnea syndrome, is often underestimated because it requires a burdensome test (ie, polysomnography) to ensure diagnosis. To improve polysomnography referral, it is of utmost importance to validate efficient alternative screening tools. This study aimed to provide a translation and a cross-cultural validation of the Pediatric Sleep Questionnaire (PSQ) into French to obtain an easy-to-use and reliable screening tool. The psychometric properties of the French version were also determined. METHODS: The process of cross-cultural adaptation was carried out following these steps: forward-backward translation, evaluation by an expert committee, and pretesting of the pre-final version. Reliability of the French-PSQ version was assessed by Cronbach's alpha coefficients and Spearman's correlation on a convenient sample of 201 children (aged between 2 and 17 years). Construct validity was determined by factor analysis of principal components. RESULTS: Internal consistency was within an adequate range for all subscales: 0.711 for snoring, 0.559 for sleepiness, 0.682 for behavioral problems, and 0.776 for the whole questionnaire. Spearman's correlation analysis comparing questionnaires administered two weeks apart showed good correlation coefficients for all subscales (snoring: 0.642, sleepiness: 0.846, behavioral problems: 0.780, and entire SRBD scale: 0.835). Factor analysis performed to assess the structure of the French-SRBD scale confirmed the same four factors described in the original questionnaire ("breathing," "behavior," "sleepiness," and "other"). CONCLUSION: The French version of the PSQ has been successfully cross-culturally adapted and showed good psychometric properties, suggesting that it is useful as a tool to screen sleep-disordered breathing in French-speaking children.
Assuntos
Síndromes da Apneia do Sono/diagnóstico , Síndromes da Apneia do Sono/fisiopatologia , Apneia Obstrutiva do Sono/diagnóstico , Apneia Obstrutiva do Sono/fisiopatologia , Adolescente , Criança , Pré-Escolar , Comparação Transcultural , Estudos Transversais , Análise Fatorial , Feminino , França/epidemiologia , Humanos , Masculino , Polissonografia/métodos , Prevalência , Comportamento Problema/psicologia , Psicometria/instrumentação , Reprodutibilidade dos Testes , Respiração , Síndromes da Apneia do Sono/epidemiologia , Apneia Obstrutiva do Sono/epidemiologia , Sonolência , Ronco/epidemiologia , Inquéritos e Questionários , TraduçãoRESUMO
Abstract Gingival conditions and tooth sensitivity of young patients with amelogenesis imperfecta lack in depth studies. This case-control study aimed to compare (1) the gingival inflammation, the presence of enamel defects, and tooth sensitivity in young patients with and without amelogenesis imperfecta and (2) to investigate if any difference exists between subtypes of amelogenesis imperfecta. Methodology We compared forty-two participants with amelogenesis imperfecta with forty-two controls matched for age, gender, and the number of examined sites. Based on interview, clinical examination, and intraoral photography, we collected data on periodontal conditions, enamel defects and the presence of tooth sensitivity. Comparison tests were performed to investigate if any difference existed between cases and controls; and among cases, between the different subtypes of amelogenesis imperfecta. We performed a post-hoc analysis for any significant difference observed. Results We observed more gingival inflammation, enamel defects and tooth sensitivity among cases (all p<0.05). Participants with hypocalcified amelogenesis imperfecta had more gingival inflammation, enamel defects, and tooth sensitivity than patients with the hypoplastic and hypomature subtypes (all p<0.05). After adjustment for dental plaque, gingival inflammation was associated with the presence of amelogenesis imperfecta (OR (95%CI) = 1.14 (1.05; 1.24). p<0.01). Conclusion Gingival inflammation, enamel defect and tooth sensitivity are more frequently observed among young patients with amelogenesis imperfecta, and more specifically among children with the hypocalcified subtype.
Assuntos
Humanos , Masculino , Feminino , Criança , Sensibilidade da Dentina/epidemiologia , Amelogênese Imperfeita/epidemiologia , Estudos de Casos e Controles , Esmalte Dentário , InflamaçãoRESUMO
Superelasticity is a property used in orthodontics to initiate tooth movement in the first stage of orthodontic treatment. It is the aim of all clinicians to accomplish biological tooth movement, which implies the use of low, continuous force and requires archwire with low stiffness. In this study, 15 nickel-titanium archwires with three different cross-sectional dimensions were tested in three-point bending to determine the nature of forces in a loading and unloading cycle. The evolution of stiffness in bending as a function of wire size is discussed. The applied forces or stiffness dependence on cross-sectional size differs from the linear-elastic prediction because of the superelasticity property. We discuss the origin of the nonconventional profile of curves and the nature of reversible large deformation of these alloys. Martensitic transformation is at the origin of nonlinear elasticity. The stiffness decreases with increasing deflection, and this phenomenon is emphasized in the unloading process. The value of stiffness appears to vary with wire size but depends on the ratio of volume of martensitic transformation. During martensitic transformation, the rigidity (elastic modulus) of the alloy is nonconstant. These results and their understanding should allow a different approach of biomechanical considerations, ie, a large-size square wire does not produce necessarily high forces.
Assuntos
Ligas Dentárias/química , Níquel/química , Fios Ortodônticos , Titânio/química , Fenômenos Biomecânicos , Elasticidade , Humanos , Teste de Materiais , Maleabilidade , Estresse Mecânico , Propriedades de SuperfícieRESUMO
The choice of the most suitable orthodontic wire for each stage of treatment requires estimation of the forces generated. In theory, the selection of wire sequences should initially utilize a lower flexural rigidity; thus clinicians use smaller round cross-sectional dimension wires to generate lighter forces during the preliminary alignment stage. This assessment is true for conventional alloys, but not necessarily for superelastic nickel titanium (NiTi). In this case, the flexural rigidity dependence on cross-sectional dimension differs from the linear elasticity prediction because of the martensitic transformation process. It decreases with increasing deflection and this phenomenon is accentuated in the unloading process. This behaviour should lead us to consider differently the biomechanical approach to orthodontic treatment. The present study compared bending in 10 archwires made from NiTi orthodontics alloy of two cross-sectional dimensions. The results were based on microstructural and mechanical investigations. With conventional alloys, the flexural rigidity was constant for each wire and increased largely with the cross-sectional dimension for the same strain. With NiTi alloys, the flexural rigidity is not constant and the influence of size was not as important as it should be. This result can be explained by the non-constant elastic modulus during the martensite transformation process. Thus, in some cases, treatment can begin with full-size (rectangular) wires that nearly fill the bracket slot with a force application deemed to be physiologically desirable for tooth movement and compatible with patient comfort.