Sustainable Series of New Epoxidized Vegetable Oil-Based Thermosets with Chemical Recycling Properties.

This work reports for the first time the copolymerization studies of 11 newly synthesized epoxidized vegetable oils (EVOs) that reacted with a disulfide-based aromatic dicarboxylic acid (DCA) to produce thermoset materials with recyclability properties. These new EVOs' reactivity and properties were compared with those of the two commercial references: epoxidized linseed oil (ELO) and epoxidized soybean oil (ESO). The structure-reactivity correlation is proposed by differential scanning calorimetry (DSC) analysis, corroborating the epoxy content of EVO monomers, the initiator effect, the copolymerization reaction enthalpy, and the temperature range. The thermomechanical properties of the obtained thermosets were evaluated and discussed in correlation with the structure and reactivity of monomers by dynamic mechanical analysis (DMA), tensile testing, and thermogravimetric analysis (TGA). It has been found that the higher the EVO functionality, the higher is the reactivity, cross-linking density, and final performances, with tan δ values ranging from 34 to 111 °C. This study investigates the chemical recycling and the solvent resistance of these vitrimer-like materials that have a high bio-based carbon content, from 58 to 79%, with potential application in coating or composite materials in the automotive sector.

Kinetical Study, Thermo-Mechanical Characteristics and Recyclability of Epoxidized Camelina Oil Cured with Antagonist Structure (Aliphatic/Aromatic) or Functionality (Acid/Amine) Hardeners.

In an attempt to prepare sustainable epoxy thermosets, this study introduces for the first time the idea to use antagonist structures (aromatic/aliphatic) or functionalities (acid/amine) as hardeners to produce reprocessable resins based on epoxidized camelina oil (ECMO). Two kinds of mixtures were tested: one combines aromatic/aliphatic dicarboxylic acids: 2,2'-dithiodibenzoic acid (DTBA) and 3,3'-dithiodipropionic acid (DTDA); another is the combination of two aromatic structures with acid/amine functionality: DTBA and 4-aminophenyl disulfide (4-AFD). DSC and FT-IR analyses were used as methods to analyze the curing reaction of ECMO with the hardeners. It was found that the thermosets obtained with the dual crosslinked mechanism needed reduced curing temperatures and reprocessing protocols compared to the individual crosslinked thermosets. Thanks to the contribution of disulfide bonds in the network topology, the obtained thermosets showed recycling ability. The final thermomechanical properties of the virgin and mechanical reprocessed materials were analyzed by DMA and TGA. The obtained thermosets range from elastomeric to rigid materials. As an example, the ECMO/DTBA704-AFD30 virgin or reprocessed thermosets have tan δ values reaching 82-83 °C. The study also investigates the chemical recycling and the solvent resistance of these vitrimer-like materials.

Build-To-Specification Vanillin and Phloroglucinol Derived Biobased Epoxy-Amine Vitrimers.

Epoxy resins are widely used in the composite industry due to their dimensional stability, chemical resistance, and thermo-mechanical properties. However, these thermoset resins have important drawbacks. (i) The vast majority of epoxy matrices are based on non-renewable fossil-derived materials, and (ii) the highly cross-linked molecular architecture hinders their reprocessing, repairing, and recycling. In this paper, those two aspects are addressed by combining novel biobased epoxy monomers derived from renewable resources and dynamic crosslinks. Vanillin (lignin) and phloroglucinol (sugar bioconversion) precursors have been used to develop bi- and tri-functional epoxy monomers, diglycidyl ether of vanillyl alcohol (DGEVA) and phloroglucinol triepoxy (PHTE) respectively. Additionally, reversible covalent bonds have been incorporated in the network by using an aromatic disulfide-based diamine hardener. Four epoxy matrices with different ratios of epoxy monomers (DGEVA/PHTE wt%: 100/0, 60/40, 40/60, and 0/100) were developed and fully characterized in terms of thermal and mechanical properties. We demonstrate that their performances are comparable to those of commonly used fossil fuel-based epoxy thermosets with additional advanced reprocessing functionalities.

Facile and scalable synthesis of nanoporous materials based on poly(ionic liquid)s.

A simple, fast, sustainable, and scalable strategy to prepare nanoporous materials based on poly(ionic liquid)s (PILs) is presented. The synthetic strategy relies on the radical polymerization of crosslinker-type ionic liquid (IL) monomers in the presence of an analogous IL, which acts as a porogenic solvent. This IL can be extracted easily after polymerization and recycled for further use. The great advantages of this synthetic approach are the atom-efficiency and lack of waste. The effects of different monomer/porogen ratios on the specific surface area, porosity, and pore size have been investigated. Finally, the potential of the materials as CO2 sorbents has been evaluated.

Shoot control of root development and nodulation is mediated by a receptor-like kinase.

In legumes, root nodule organogenesis is activated in response to morphogenic lipochitin oligosaccharides that are synthesized by bacteria, commonly known as rhizobia. Successful symbiotic interaction results in the formation of highly specialized organs called root nodules, which provide a unique environment for symbiotic nitrogen fixation. In wild-type plants the number of nodules is regulated by a signalling mechanism integrating environmental and developmental cues to arrest most rhizobial infections within the susceptible zone of the root. Furthermore, a feedback mechanism controls the temporal and spatial susceptibility to infection of the root system. This mechanism is referred to as autoregulation of nodulation, as earlier nodulation events inhibit nodulation of younger root tissues. Lotus japonicus plants homozygous for a mutation in the hypernodulation aberrant root (har1) locus escape this regulation and form an excessive number of nodules. Here we report the molecular cloning and expression analysis of the HAR1 gene and the pea orthologue, Pisum sativum, SYM29. HAR1 encodes a putative serine/threonine receptor kinase, which is required for shoot-controlled regulation of root growth, nodule number, and for nitrate sensitivity of symbiotic development.