Surgical treatment of fracture sequelae of the proximal humerus according to a pathology-based modification of the Boileau classification results in improved clinical outcome after shoulder arthroplasty.

BACKGROUND: Fracture sequelae of the proximal humerus were classified by Boileau into four types. Since there are pathomorphological differences and specific characteristics within the four types, we have developed a subclassification. For elderly patients, shoulder arthroplasty is mostly recommended. Based on the available literature and clinical trial results, a subclassification could be created that suggests a specific therapy for each subgroup. The aim of this study was to evaluate the endoprosthetic therapy according to the proposed subclassification and to provide an overview of the clinical and radiological results after endoprosthetic treatment of proximal humerus fracture sequelae. METHODS: Patients with fracture sequelae of the proximal humerus who underwent arthroplasty according to the suggestion of the subclassification were included. Minimum time to follow-up was twelve months. General condition and several specific shoulder scores as the Constant-Murley Score (CS) were recorded at the follow-up examination. Complication and revision rates were analyzed. RESULTS: In total, 59 patients (72.6 ± 10.0 years, 47 females, 12 males) were included. Mean follow-up time was 31.3 ± 17.0 months. Reverse shoulder arthroplasty was performed in 49 patients and anatomic shoulder arthroplasty was performed in ten patients. The CS increased by 47.3 points from preoperative (15.0) to postoperative (62.3). Good or very good clinical results were seen in 61% of the patients. Complications were observed in twelve (20%) patients and revision surgery was performed in nine (15%) patients. CONCLUSION: Due to of the variety of fracture sequelae of the proximal humerus, a modification of the Boileau classification seems necessary. This study shows that endoprosthetic treatment for fracture sequelae can significantly improve the shoulder function in elderly patients. Good clinical results can be achieved with a comparatively low revision rate following the treatment suggestions of the proposed subclassification of the Boileau classification. LEVEL OF EVIDENCE IV: Case series.

Functional results and unfavorable events after treatment of proximal humerus fractures using a new locking plate system.

BACKGROUND: Proximal humerus fractures are often treated with a fixed-angle titanium plate osteosynthesis. Recently, plates made of alternative materials such as carbon fibre-reinforced polyetheretherketone (CFR-PEEK) have been introduced. This study presents the postoperative results of patients treated with a CFR-PEEK plate. METHODS: Patients with proximal humerus fractures treated with a CFR-PEEK plate (PEEKPower™ Humeral Fracture Plate (HFP)) were included. In follow-up examination, age and gender adjusted Constant-Murley Score (ACS), Subjective Shoulder Value (SSV), Quick Disabilities of the Arm, Shoulder and Hand Score (QDASH) and pain score (Visual Analog Scale (VAS)) were analyzed. General condition at follow-up was measured by European Quality of Life 5 Dimensions 3 Level Version (EQ-5D-3L). Range of motion was recorded. In addition, radiographs at follow-up, unfavorable events and revision rate were analyzed. RESULTS: In total, 98 patients (66.0 ± 13.2 years, 74 females, 24 males) were reexamined. Mean follow-up was 27.6 ± 13.2 months. There were 15 2-part, 28 3-part and 55 4-part fractures. The functional scores showed good results: SSV 83.3 ± 15.6%, QDASH 13.1 ± 17.0 and ACS 80.4 ± 16.0. A 4-part-fracture, head split component, nonanatomic head shaft reposition and preoperative radiological signs of osteoarthritis were significant negative predictors for poorer clinical scores. Unfavourable events were observed in 27 patients (27.6%). Revision surgery was performed in 8 (8.2%) patients. Risk factors for an unfavourable event were female gender, age of 50 years and older, diabetes, affected dominant hand, 4-part fracture, head split and preoperative radiological signs of osteoarthritis. CONCLUSION: There are several advantages of the CFR-PEEK plate (PEEKPower™ Humeral Fracture Plate (HFP)) such as the polyaxial screw placement and higher stability of locking screws. In summary, the CFR-PEEK plate osteosynthesis is a good alternative with comparable clinical results and some biomechanical advantages. Proximal humerus fractures show good clinical results after treatment with a CFR-PEEK plate. The revision rate and the risk of unfavorable events are not increased compared to conventional titanium plate osteosynthesis. LEVEL OF EVIDENCE: IV.

Correct positioning of the calcar screw leads to superior results in proximal humerus fractures treated with carbon-fibre-reinforced polyetheretherketone plate osteosynthesis with polyaxial locking screws.

BACKGROUND: Plate osteosynthesis with implants made of carbon-fibre-reinforced polyetheretherketone (CFR-PEEK) has recently been introduced for the treatment of fractures of the proximal humerus (PHFs). The advantages of the CFR-PEEK plate are considered to be its radiolucency, its favourable modulus of elasticity, and the polyaxial placement of the screws with high variability of the angle. The primary aim of this study is to investigate the influence of calcar screw positioning on the complication and revision rates after CFR-PEEK plating of PHFs. The secondary aim is to assess its influence on functional outcome. MATERIAL AND METHODS: Patients were identified retrospectively. Minimum follow-up was 12 months. The cohort was divided into two groups depending on the distance of the calcar screw to the calcar (group I: < 12 mm, group II: ≥ 12 mm). The range of motion (ROM), Subjective Shoulder Value Score (SSV) and Constant-Murley Score (CS) were analysed at follow-up examination. Subjective complaints, complications (e.g. humeral head necrosis, varus dislocation) and the revision rate were evaluated. RESULTS: 51 patients (33 female, 18 male) with an average age of 68.6 years were included after a period of 26.6 months (group I: 32 patients, group II: 19 patients). Apart from the gender distribution, no significant differences were seen in the patient characteristics. The outcome scores showed significantly better clinical results in group I: SSV 83.4 vs 71.2, p = 0.007; CS 79.1 vs 67.8, p = 0.013. Complications were seen less frequently in group I (18.8 % vs 47.4 %, p = 0.030). CONCLUSION: This study shows that the positioning of the calcar screw is relevant for CFR-PEEK plate osteosynthesis in PHFs with a good reduction of the fracture. Optimal positioning of the calcar screw close to the calcar (< 12 mm) is associated with a lower rate of complications, resulting in significantly superior functional outcomes. LEVEL OF EVIDENCE: III, retrospective cohort study.

Treatment of avascular necrosis of the humeral head - Postoperative results and a proposed modification of the classification.

BACKGROUND: Avascular necrosis of the humeral head after proximal humeral fracture i.e. type 1 fracture sequelae (FS) according to the Boileau classification is a rare, often painful condition and treatment still remains a challenge. This study evaluates the treatment of FS type 1 with anatomic and reverse shoulder arthroplasty and a new subclassification is proposed. METHODS: This single-center, retrospective, comparative study, included all consecutive patients with a proximal humeral FS type 1 treated surgically in a four-year period. All patients were classified according to the proposed 3 different subtypes. Constant score (CS), Quick DASH score, subjective shoulder value (SSV) as well as revision and complication rate were analyzed. In the preoperative radiographs the acromio-humeral interval (AHI) and greater tuberosity resorption were examined. RESULTS: Of 27 with a FS type 1, 17 patients (63%) with a mean age of 64 ± 11 years were available for follow-up at 24 ± 10 months. 7 patients were treated with anatomic and 10 with reverse shoulder arthroplasty. CS improved significantly from 16 ± 7 points to 61 ± 19 points (p < 0.0001). At final follow-up the mean Quick DASH Score was 21 ± 21 and the mean SSV was 73 ± 21 points. The mean preoperative AHI was 9 ± 3 mm, however, 8 cases presented an AHI < 7 mm. 4 cases had complete greater tuberosity resorption. The complication and revision rate was 19%; implant survival was 88%. CONCLUSION: By using the adequate surgical technique good clinical short-term results with a relatively low complication rate can be achieved in FS type 1. The Boileau classification should be extended for fracture sequelae type 1 and the general recommendation for treatment with hemiarthroplasty or total shoulder arthroplasty has to be relativized. Special attention should be paid to a decreased AHI and/or resorption of the greater tuberosity as indirect signs for dysfunction of the rotator cuff. To facilitate the choice of the adequate prosthetic treatment method the suggested subclassification system should be applied.

Different expectations of patients and surgeons with regard to rotator cuff repair.

BACKGROUND: Rotator cuff lesions are a common shoulder pathology mainly affecting patients aged >50 years. This condition is accompanied by not only pain and loss of function but also impaired quality of life and psychological stress. A frequently employed treatment option is arthroscopic repair. But expectations regarding the outcome after surgery might differ between patients and surgeons and therefore lead to dissatisfaction on both sides. The aim of this study was to document patient expectations of a planned arthroscopic rotator cuff repair and compare the results with the assessment of shoulder surgeons. MATERIALS AND METHODS: A total of 303 patients and 25 surgeons were involved in this study. Patients with partial- or full-thickness tear of the rotator cuff scheduled for arthroscopic repair were included in this study. Preoperatively, they were asked to fill out questionnaires inquiring sociodemographic data, scores of the underlying pathology, as well as expectations regarding the operation with regard to pain relief, gain of range of motion and strength, as well as the effect on activities of daily life, work, and sports. Furthermore, 25 surgeons were surveyed on what they think their patients expected using the same standardized questions. RESULTS: Among the patients, 43.9% considered gain of range of motion to be the most important goal after rotator cuff repair, followed by pain relief (30.6%) and gain of force (13.7%). Among the surgeons, 72% believed pain relief to be the most important for their patient followed by movement (20%) and strength (8%). When asked which parameter was the most important to achieve after operation, for patients, movement was on first place, pain second, and strength third. For shoulder specialists, the ranking was pain, movement, and strength. Surgeons significantly overrated pain relief when ranking against movement compared with their patients. CONCLUSION: The expectations of patients regarding their operation differ from the surgeon's assessment. Whereas gaining range of motion was more important for patients, surgeons clearly voted for pain relief. Different expectations should therefore be discussed within the pretreatment interview and taken into account when planning the right therapy. This might lead to better satisfaction on both sides.

Locked fracture dislocations of the proximal humerus: postoperative results and a proposed modification of the classification.

BACKGROUND: Locked dislocations of the glenohumeral joint are disabling and often painful conditions and the treatment is challenging. This study evaluates the functional outcome and the different prosthetic treatment options for chronic locked dislocations of the glenohumeral joint and a subclassification is proposed. METHODS: In this single-center retrospective case series, all patients with a chronic locked dislocation treated surgically during a four-year period were analyzed. Constant score (CS), Quick Disabilities of Shoulder and Hand Score (DASH), patient satisfaction (subjective shoulder value (SSV)), revision rate and glenoid notching were analyzed. RESULTS: 26 patients presented a chronic locked dislocation of the glenohumeral joint. 16 patients (62%) with a mean age of 75 [61-83] years were available for follow-up at 24 ± 18 months. CS improved significantly from 10 ± 6 points to 58 ± 21 points (p < 0.0001). At the final follow-up, the mean DASH was 27 ± 23 and the mean SSV was 58 ± 23 points. The complication rate was 19% and the revision rate was 6%; implant survival was 94%. Scapular notching occurred in 2 (13%) cases (all grade 1). CONCLUSION: With good preoperative planning and by using the adequate surgical technique, good clinical short-term results with a low revision rate can be achieved. The authors suggest extending the Boileau classification for fracture sequelae type 2 and recommend using a modified classification to facilitate the choice of treatment as the suggested classification system includes locked posterior and anterior dislocations with and without glenoid bone loss. LEVEL OF EVIDENCE: IV.

Tensioning device increases biomechanical stability of tuberosity fixation technique with cerclage sutures in reverse shoulder arthroplasty for fracture.

BACKGROUND: Complex proximal humeral fractures in elderly patients are increasingly treated with primary reverse total shoulder arthroplasty. Many surgeons use cerclage sutures for tuberosity fixation in reverse total shoulder arthroplasty for proximal humeral fractures. In this study, we hypothesized that sutures fixated with a tensioning device would achieve higher initial fixation stability of the tuberosities compared with manually knotted cerclage sutures in a biomechanical model. METHODS: A 4-part fracture was created in 7-paired human cadaver proximal humeri. The tuberosities were reduced anatomically and fixed with 3 cerclage sutures in a standardized technique. Tightening was performed either manually (n = 7) or with a cerclage tensioning device with 50 Newton meter (N m) (n = 7). The humeri were placed in a custom-made test setup enabling internal and external rotation. Cyclic loading with gradually increasing load was applied with a material testing machine starting with 20 N m and increasing by 5 N m after each 100th cycle until failure (>15° rotation of the tuberosities). Motion of the tuberosities was measured with a 3-dimensional camera system. RESULTS: Overall, the knot group reached 1040 ± 152 cycles, and the device group reached 1820 ± 719 cycles (P = .035). Major fragment motion was detected in the humeral shaft axis and in the distal divergence of the tuberosities. After 900 cycles, the knot group showed increased rotation of both lesser and greater tuberosities in all 3 axes around the humeral shaft compared with the device group. CONCLUSION: Biomechanical stability of the reattached tuberosities is significantly increased, and rotational movement of the tuberosities is decreased after tightening of the applied cerclage sutures with a tensioning device compared with manual knotting. However, transferability of these promising biomechanical results and their clinical relevance have to be verified with clinical studies.

Higher primary stability of tuberosity fixation in reverse fracture arthroplasty with 135° than with 155° humeral inclination.

BACKGROUND: Proximal humeral fractures in elderly patients are frequently treated with reverse total shoulder arthroplasty, and tuberosity healing improves clinical outcome and patient satisfaction. So far reverse prostheses with different humeral inclination (HI) angles have been used. However, it has not been investigated yet if the HI angle affects the primary stability of the tuberosity fixation in primary reverse total shoulder arthroplasty for proximal humeral fractures in a biomechanical setting. METHODS: A 4-part fracture was created in 7-paired human cadaver proximal humeri after preceding power analysis. After randomization in a pairwise fashion, reverse prostheses with either 135° (n = 7) or 155° (n = 7) were implanted. The tuberosities were reduced anatomically to the metaphysis of the prostheses and were fixed with 3 suture cerclages in a standardized technique. Tightening was performed with a cerclage tension device with 50 Newton meter (N m). Before biomechanical testing, the initial vertical and horizontal gap formation was measured. The humeri were placed in a custom-made test setup enabling internal and external rotation. Cyclic loading with a gradually increasing load magnitude was applied with a material testing machine starting with 20 N m and increasing by 5 N m after each 100th cycle until failure (>15° rotation of the tuberosities). Any motion of the tuberosities was measured with a 3-dimensional camera system. RESULTS: Overall, the 155° group reached an average of 1460 ± 270 cycles and the 135° group of 1900 ± 271 cycles (P = .048). In contrast to the 135° group, in the 155° group, a mean initial vertical (0.3 ± 0.7 mm) and horizontal (2.7 ± 3.3 mm) gap formation could be observed before cyclic loading. After 1100 cycles, the 155° group showed increased rotation of both lesser and greater tuberosities in all 3 axes around the humeral shaft compared with the 135° group. CONCLUSION: Primary stability of the reattached tuberosities is significantly increased, whereas rotational movements are decreased in prostheses with an anatomic HI of 135° compared with a 155° HI according to the original Grammont design. In addition, a 135° HI allows an exact anatomic reposition of the tuberosities, whereas this was not possible for the 155° design. However, transferability and clinical relevance of these biomechanical results have to be verified with clinical studies.

Proximal humeral fracture morphology in patients with advanced cuff tear arthropathy: an observational study in a surgically treated cohort.

BACKGROUND: In the presence of cuff tear arthropathy (CTA), joint kinematics is alternated and fracture configuration might be different. The purpose of this study was to identify fracture patterns in patients with advanced CTA to facilitate recognition and treatment. METHODS: Radiographs and computed tomography scans of all patients undergoing surgical treatment for a proximal humeral fracture (PHF) in our institution during a 5-year period were retrospectively analyzed. Fracture pattern according to the AO-OTA and Resch classification and the presence of CTA were evaluated. Glenoid configuration according to Walch, fatty atrophy of the supraspinatus muscle and the centrum-collum-diaphyseal (CCD) angle were analyzed. RESULTS: A total of 574 out of 713 patients were included. Twenty-three patients (4%) with a mean age of 82 ± 8 years showed advanced CTA with acetabularization of the acromion (≥ stage 3 according to Hamada/Fukuda). There were exclusively valgus fractures with a mean CCD angle of 158° ± 18°. Patients with CTA ≥ grade 3 had a nearly twofold greater risk (risk ratio: 1.8; confidence interval (CI): 95% 1.6-1.9; p < 0.0001) of sustaining a valgus fracture compared to patients without or with CTA < grade 3. The risk for a tuberosity fracture was nearly twofold greater in patients without or with mild CTA (risk ratio: 1.68; confidence interval (CI): 95% 1.17-2.40; p = 0.0046) compared to those with advanced CTA. CONCLUSION: In advanced CTA, a predominantly valgus fracture pattern can be observed. In addition, fractures of the greater tuberosity were significantly less frequent and were rarely displaced. Up to date, no classification system for PHF has been developed in the setting of CTA although it might indicate a different treatment, and therefore, recognition is crucial. However, when present, this changes the fracture pattern and ability to treat the fracture as the rotator cuff can no longer be utilized as a means of reducing the fragments.

High tuberosity healing rate associated with better functional outcome following primary reverse shoulder arthroplasty for proximal humeral fractures with a 135° prosthesis.

BACKGROUND: Reverse shoulder arthroplasty (RSA) is a common treatment for proximal humeral fractures. (PHF) in the elderly. This study evaluates the functional outcome and the influence of. tuberosity healing (TH) following RSA with 135° humeral inclination and a neutral glenosphere without lateralization for PHFs. METHODS: In this retrospective case series, all patients with an acute PHF treated with primary RSA with 135° humeral inclination and a standard glenosphere without lateralization during a four-year period were followed up. Constant score (CS), patient satisfaction (subjective shoulder value (SSV)), TH and glenoid notching were analyzed. RESULTS: 38 patients with a mean age of 77 ± 8 years were available for follow-up at 34 ± 5 months. The mean adjusted CS was 61 ± 9 points. TH of the greater tuberosity (GT) was 82% and resulted in significantly improved abduction (117° vs. 81°; P < 0.001), forward flexion (139° vs. 99°; p < 0.001), external rotation (28° vs. 10°; p = 0.002), CS (65 vs. 41 points; p < 0.001) and patient satisfaction (SSV 79% vs. 48%; p < 0.001). TH of the LT was 87% without affecting internal rotation or overall outcome. The complication- and revision rate was 5%; implant survival was 100%. Scapular notching occurred in 3 (8%) cases (all grade 1). CONCLUSION: RSA with 135° humeral inclination and a standard glenosphere for PHF leads to good functional outcome in combination with a high rate of TH and a low rate of scapular notching. The short-term revision rate is low and the results are predictable and continuous. TH is associated with improved ROM, patient satisfaction and functional outcome.

The Effect of Scapula Tilt and Best-Fit Circle Placement When Measuring Glenoid Bone Loss in Shoulder Instability Patients.

PURPOSE: To analyze the effect of lack of standardization on the reliability of current measurement techniques for glenoid bone loss in clinical practice. METHODS: Ten consecutive patients with anterior glenoid bone loss due to recurrent anterior shoulder instability and available computed tomographic (CT) scans of the affected shoulder were included in this study. One hundred seventy 3-dimensional en-face view images of the 10 glenoids with up to 20° degrees of tilt in the anterior, posterior, superior, and inferior direction were rendered. Three independent observers first identified the en-face view images and subsequently performed measurements of the defect surface and diameter as well as the glenoid surface and diameter on all 170 images. Measurements were completed based on the conventional best-fit circle technique using the edge of the visible glenoid bone as reference and additionally based on the so-called spoon technique, which places the best-fit circle on the edge of the visible glenoid concavity. RESULTS: The overall agreement regarding en-face view image selection between the observers was 30% (K-alpha = 0.10, 95% confidence interval 0.02-0.22). Tilt of the en-face view in any direction resulted in significant alterations of all 4 measurement parameters as well as the relative defect area and diameter (P < .05). The conventional and the spoon techniques rendered significantly different results regarding all 4 measurement parameters as well as the relative defect area (P < .05). CONCLUSION: Impreciseness of scapula positioning for creation of an en-face view of the glenoid as well as varying best-fit circle placement significantly alter glenoid defect size measurement results. CLINICAL RELEVANCE: Because the glenoid defect size plays an important role in the choice of treatment for anterior shoulder instability, measurement techniques need to be as precise as possible.

Residual increased valgus stress angulation and posterolateral rotatory translation after simple elbow dislocation.

PURPOSE: Purpose of this study was to evaluate increased valgus stress angulation and increased posterolateral rotatory translation after simple elbow dislocation and the associated clinical instability. METHODS: Ten patients [three women, seven men; mean age 38 ± 11 years; mean follow-up 54 months (median 47 months; range 23-111 months)] with conservatively treated simple elbow dislocations were included into this study. The elbow function was graded by using the subjective elbow value (SEV), the Oxford Elbow Score (OES), the Mayo Elbow Performance Score (MEPS), as well as the DASH Score. Range of motion (ROM) and clinical signs of valgus and posterolateral rotatory instability (PLRI) were evaluated. Additionally, in all patients sonographic and fluoroscopic evaluation of valgus stress angulation and posterolateral rotatory translation was performed. RESULTS: Functional scores showed excellent to good results in all patients (SEV: 92 %; OES: mean 44 ± 5 points; MES: mean 91 ± 9 points; DASH Score: mean, 4 ± 4 points). The ROM did not reveal any significant differences compared to the non-affected side. Overall, three patients presented signs of clinical instability (valgus instability: n = 1; PLRI: n = 2). Sonographically, a slightly but not significantly increased valgus stress angulation in comparison with the non-affected side was measured (n.s.). The posterolateral rotatory translation was significantly increased compared to the non-affected side (p < 0.05). In this context, sonographically, four of ten patients revealed a valgus stress angulation and seven of ten patients a posterolateral rotatory translation more than 50 % compared to the non-affected. In four patients an increased valgus stress angulation and in four patients an increased posterolateral rotatory translation could be seen fluoroscopically. CONCLUSION: Patients after conservatively treated simple elbow dislocations show good clinical and functional results. However, a sufficient anatomical ligamentary heeling does not exist. LEVEL OF EVIDENCE: IV.

Arthroscopic reduction and fixation of large solitary and multifragmented anterior glenoid rim fractures.

BACKGROUND: The optimal treatment of large anterior glenoid rim fractures is still a matter of debate. The purpose of this study was to evaluate the clinical and radiologic results of an arthroscopic reduction and fixation of acute displaced large solitary or multifragmented anterior glenoid rim fractures using anchors or bioabsorbable compression screws. METHODS: Twenty-three consecutive patients (7 women, 16 men; mean age, 47.9 [15-74] years) were treated. The patients were followed up clinically (range of motion, instability testing, and shoulder outcome scores) and with conventional radiographs (true anterior-posterior, axillary, and Bernageau views). RESULTS: With a minimum follow-up of 24 months, 21 patients could be evaluated. The average Constant score was 84.5 points, the Rowe score was 90.8 points, the Melbourne Instability Shoulder Score was 96.2 points, the Western Ontario Shoulder Instability Index was 89.2%, and the subjective shoulder value averaged 92.1%. No patient had suffered recurrent instability. The radiologic evaluation revealed signs of osteoarthritis in 7 cases, which was pre-existing in 1 patient. Patients with osteoarthritis were on average 10 years older at the time of surgery compared with patients without osteoarthritis. A postoperative step-off of the glenoid was detected in 7 cases and averaged 2 (1-3) mm. We could not find a correlation between the step-off and the presence of osteoarthritis. CONCLUSION: Arthroscopic reconstruction of acute large solitary and multifragmented fractures of the glenoid rim shows good and excellent clinical results. In the majority of cases, an anatomic reduction and healing of the glenoid fracture can be achieved. The rate of osteoarthritis needs further investigation.

Arthroscopic knotless suprapectoral tenodesis of the long head of biceps: clinical and structural results.

INTRODUCTION: Different techniques for tenodesis of the long head of biceps (LHB) have been described. Previous studies focused on intraosseously performed techniques while only little clinical data exists for epiosseously performed knotless LHB tenodesis. The hypothesis is that arthroscopic suprapectoral knotless epiosseous tenodesis of the LHB would have good clinical, cosmetic and structural results. METHODS: Forty-nine patients [16 women, 33 men; mean age 58; mean follow-up 36.4 months (range 24-57 months)], in whom a tenodesis of the long biceps tendon (LHB) has been performed, were included into this study. The clinical evaluation included the Constant score as well as the LHB score. In addition elbow flexion and supination strength were assessed. The integrity of the tenodesis construct was evaluated indirectly by sonographic detection of the LHB in the bicipital groove. RESULTS: The overall Constant score did not reveal any significant differences comparing both sides [mean, 86 ± 19 points vs. 89 ± 16 points (p > 0.05)]. The mean LHB score reached 88.3 points (range 54-100 points). Thirty-four patients (69 %) presented an examiner-dependent upper arm deformity although only three patients (6 %) confirmed a subjective cosmetic deformity. Both, flexion and supination strength were significantly decreased compared to the non-operated side (p < 0.05). In five patients (10 %) it was not possible to verify the LHB sonographically in the bicipital groove. Therefore the biceps tenodesis was classified as a failure. CONCLUSION: The arthroscopic suprapectoral epiosseous knotless tenodesis of the LHB provides good functional results. The high rate of examiner-dependent upper arm deformities can be explained by a non-physiological situation of the primary length-tension relationship or an elongation of the tendon after fixation.

Two-staged application of PRP in arthroscopic rotator cuff repair: a matched-pair analysis.

INTRODUCTION: Failure rates after arthroscopic rotator cuff repair remain high. Platelet-rich plasma has gained interest as a potential biological augmentation to enhance bone-tendon healing. The purpose of this study is to evaluate the clinical and structural outcomes of repeated PRP application on rotator cuff repair. MATERIALS AND METHODS: Thirty-six patients underwent arthroscopic reconstruction, using knotless anchor double-row repair. Eighteen patients [10 female, 8 male; 61.2 (±9.2) years] received two applications of PRP-directly subsequent to the repair and 7 days postoperatively. Eighteen patients [11 male, 7 female; 61.4 (±6.5) years] who solely received the same technique of rotator cuff repair were matched for age. The subjective shoulder value, WORC, and the Constant-Murley score were used for clinical evaluation. MRI was performed for tendon integrity, and cuff appearances were graded according to the Sugaya classification. RESULTS: We prospectively evaluated the PRP group with a minimum follow-up of 24 months. Clinical results did not show significantly differences in comparison to patients with isolated rotator cuff repair concerning CS (79 ± 13 vs. 77 ± 13; P = 0.6), SSV (90 ± 14 vs. 88 ± 16; P = 0.5) or WORC Score (90 ± 18 vs. 86 ± 20; P = 0.2). At the final follow-up, MRI showed retears in 11 % of the PRP and in 28 % of the control group (P = 0.4). CONCLUSIONS: Knotless-anchor double-row repair shows good to excellent clinical results with an acceptable retear rate. Additional two-staged PRP application failed to significantly improve clinical parameters. Even though there was a trend for lower retear rates in the PRP group, it did not achieve statistical difference. LEVEL OF EVIDENCE: Level III, Retrospective comparative study.

Serial MRI evaluation following arthroscopic rotator cuff repair in double-row technique.

INTRODUCTION: So far, recurrent rotator cuff defects are described to occur in the early postoperative period after arthroscopic repair. The aim of this study was to evaluate the musculotendinous structure of the supraspinatus, as well as bone marrow edema or osteolysis after arthroscopic double-row repair. Therefore, magnetic resonance (MR) images were performed at defined intervals up to 2 years postoperatively. STUDY DESIGN: Case series; Level of evidence, 3. MATERIALS AND METHODS: MR imaging was performed within 7 days, 3, 6, 12, 26, 52 and 108 weeks after surgery. All patients were operated using an arthroscopic modified suture bridge technique. Tendon integrity, tendon retraction ["foot-print-coverage" (FPC)], muscular atrophy and fatty infiltration (signal intensity analysis) were measured at all time points. Furthermore, postoperative bone marrow edema and signs of osteolysis were assessed. RESULTS: MR images of 13 non-consecutive patients (6f/7m, ∅ age 61.05 ± 7.7 years) could be evaluated at all time points until ∅ 108 weeks postoperatively. 5/6 patients with recurrent defect at final follow-up displayed a time of failure between 12 and 24 months after surgery. Predominant mode of failure was medial cuff failures in 4/6 cases. The initial FPC increased significantly up to 2 years follow-up (p = 0.004). Evaluations of muscular atrophy or fatty infiltration were not significant different comparing the results of all time points (p > 0.05). Postoperative bone marrow edema disappeared completely at 6 months after surgery, whereas signs of osteolysis appeared at 3 months follow-up and increased to final follow-up. CONCLUSIONS: Recurrent defects after arthroscopic reconstruction of supraspinatus tears in modified suture bridge technique seem to occur between 12 and 24 months after surgery. Serial MRI evaluation shows good muscle structure at all time points. Postoperative bone marrow edema disappears completely several months after surgery. Signs of osteolysis seem to appear caused by bio-absorbable anchor implantations.

Recovery of subscapularis and shoulder function following arthroscopic treatment of isolated anterior and combined anterosuperior rotator cuff lesions.

BACKGROUND: The purpose of the study was to evaluate the recovery of the subscapularis and shoulder function dependent on the type of lesion and type of surgical treatment, when compared to the non-affected contralateral shoulder. We hypothesized that regardless of type of lesion and performed surgical intervention, a significant muscle insufficiency as compared to the healthy contralateral side will remain. PATIENTS AND METHODS: Sixty-eight patients (14 females and 54 males) with an anterior or anterosuperior cuff lesion at an average age of 55.7 ± 11.7 years (range 20-80 years) were prospectively evaluated up to 24 months. Intraoperatively, the lesions were classified according to current systems and treated by debridement or reconstruction. Pre- and postoperatively, the Constant Score (CS) as well as the belly-press angle (BPA) and back-to-hand distance (BHD) on the affected and on the contralateral shoulder was noted. RESULTS: 29.4% had an isolated subscapularis lesion whereas 69.1% had concomitant supraspinatus pathology. In 17 patients an arthroscopic debridement and in 51 patients an arthroscopic repair were performed. Postoperatively, all patients revealed a significant improvement of the CS, BPA and BHD (p < 0.05) independent of the type of lesion or the surgical intervention. However, reconstruction of the subscapularis tendon resulted in significant differences of CS, BPA and BHD (p < 0.05) compared to the contralateral shoulder. CONCLUSION: Reconstruction of subscapularis lesions cannot provide full subscapularis function since a residual subscapularis insufficiency remains, other than in patients with small partial tears treated with debridement alone.

Arthroscopic knotless-anchor rotator cuff repair: a clinical and radiological evaluation.

PURPOSE: The goal of this study was to evaluate the clinical and radiological results of the arthroscopic knotless-anchor Speed-Bridge technique, in particular the pattern and the rate of retears. The results were compared with a modified Suture-Bridge knot-tying technique (mDR). The hypothesis is that arthroscopic knotless-anchor Speed-Bridge rotator cuff repair is a sufficient technique to address supraspinatus tears and differs in pattern of retears when compared to mDR. METHODS: This study includes twenty-two consecutive patients (8f/14m ø 63.3 ± 7.2 years) undergoing knotless-anchor Speed-Bridge repair. The subjective shoulder value (SSV), Constant score (CS) and Western Ontario Rotator Cuff (WORC) Score were used for clinical follow-up. MRI scans were conducted within 3 weeks post-operatively, after 1 and after 2 years for analysis of (a) tendon integrity (according to Sugaya), (b) muscle atrophy according to Thomazeau and (c) fatty infiltration. Results were compared with 20 patients operated in mDR (ø 61.2 ± 7.5 years). RESULTS: The mean follow-up was 24.4 ± 4.7 months. The average SSV was 88.7 ± 14.9 %, the CS was 78.2 ± 13.2 points (contralateral side 78.5 ± 16.6) and the WORC Score averaged 87.1 ± 18.2 %. On magnetic resonance imaging, the integrity failure rate was 22.7 % (n = 5). The pattern of retear was a medial cuff failure in 2/5 cases (mDR 4/5, n.s.). Muscular atrophy or fatty degeneration did not increase between surgery and follow-up (n.s.). Compared with mDR (25 %) reconstruction, no significant differences were obtained regarding integrity failure rate and muscular atrophy (n.s.). CONCLUSION: The modified knotless-anchor Speed-Bridge technique shows good to excellent clinical results as well as acceptable retear rates. This technique eliminates medial and lateral knot impingement. Concerning the potential reduction in the medial strangulation of the tendon, there is a need for further clinical research.

Do Matrix Metalloproteases and Tissue Inhibitors of Metalloproteases in Tenocytes of the Rotator Cuff Differ with Varying Donor Characteristics?

An imbalance between matrix metalloproteases (MMPs) and the tissue inhibitors of metalloproteases (TIMPs) may have a negative impact on the healing of rotator cuff tears. The aim of the project was to assess a possible relationship between clinical and radiographic characteristics of patients such as the age, sex, as well as the degenerative status of the tendon and the MMPs and TIMPs in their tenocyte-like cells (TLCs). TLCs were isolated from ruptured supraspinatus tendons and quantitative Real-Time PCR and ELISA was performed to analyze the expression and secretion of MMPs and TIMPs. In the present study, MMPs, mostly gelatinases and collagenases such as MMP-2, -9 and -13 showed an increased expression and protein secretion in TLCs of donors with higher age or degenerative status of the tendon. Furthermore, the expression and secretion of TIMP-1, -2 and -3 was enhanced with age, muscle fatty infiltration and tear size. The interaction between MMPs and TIMPs is a complex process, since TIMPs are not only inhibitors, but also activators of MMPs. This study shows that MMPs and TIMPs might play an important role in degenerative tendon pathologies.