RESUMO
A novel BOPHY-fullerene C60 dyad (BP-C60 ) was designed as a heavy-atom-free photosensitizer (PS) with potential uses in photodynamic treatment and reactive oxygen species (ROS)-mediated applications. BP-C60 consists of a BOPHY fluorophore covalently attached to a C60 moiety through a pyrrolidine ring. The BOPHY core works as a visible-light-harvesting antenna, while the fullerene C60 subunit elicits the photodynamic action. This fluorophore-fullerene cycloadduct, obtained by a straightforward synthetic route, was fully characterized and compared with its individual counterparts. The restricted rotation around the single bond connecting the BOPHY and pyrrolidine moieties led to the formation of two atropisomers. Spectroscopic, electrochemical, and computational studies disclose an efficient photoinduced energy/electron transfer process from BOPHY to fullerene C60 . Photodynamic studies indicate that BP-C60 produces ROS by both photomechanisms (typeâ I and typeâ II). Moreover, the dyad exhibits higher ROS production efficiency than its individual constitutional components. Preliminary screening of photodynamic inactivation on bacteria models (Staphylococcus aureus and Escherichia coli) demonstrated the ability of this dyad to be used as a heavy-atom-free PS. To the best of our knowledge, this is the first time that not only a BOPHY-fullerene C60 dyad is reported, but also that a BOPHY derivative is applied to photoinactivate microorganisms. This study lays the foundations for the development of new BOPHY-based PSs with plausible applications in the medical field.
Assuntos
Anti-Infecciosos , Fulerenos , Fotoquimioterapia , Anti-Infecciosos/farmacologia , Fármacos Fotossensibilizantes/farmacologia , Staphylococcus aureusRESUMO
The essential role of a well-defined hydrogen-bond network in achieving chemically reversible multiproton translocations triggered by one-electron electrochemical oxidation/reduction is investigated by using pyridylbenzimidazole-phenol models. The two molecular architectures designed for these studies differ with respect to the position of the N atom on the pyridyl ring. In one of the structures, a hydrogen-bond network extends uninterrupted across the molecule from the phenol to the pyridyl group. Experimental and theoretical evidence indicates that an overall chemically reversible two-proton-coupled electron-transfer process (E2PT) takes place upon electrochemical oxidation of the phenol. This E2PT process yields the pyridinium cation and is observed regardless of the cyclic voltammogram scan rate. In contrast, when the hydrogen-bond network is disrupted, as seen in the isomer, at high scan rates (â¼1000 mV s-1) a chemically reversible process is observed with an E1/2 characteristic of a one-proton-coupled electron-transfer process (E1PT). At slow cyclic voltammetric scan rates (<1000 mV s-1) oxidation of the phenol results in an overall chemically irreversible two-proton-coupled electron-transfer process in which the second proton-transfer step yields the pyridinium cation detected by infrared spectroelectrochemistry. In this case, we postulate an initial intramolecular proton-coupled electron-transfer step yielding the E1PT product followed by a slow, likely intermolecular chemical step involving a second proton transfer to give the E2PT product. Insights into the electrochemical behavior of these systems are provided by theoretical calculations of the electrostatic potentials and electric fields at the site of the transferring protons for the forward and reverse processes. This work addresses a fundamental design principle for constructing molecular wires where protons are translocated over varied distances by a Grotthuss-type mechanism.
RESUMO
Bioinspired constructs consisting of benzimidazole-phenol moieties bearing N-phenylimines as proton-accepting substituents have been designed to mimic the H-bond network associated with the TyrZ-His190 redox relay in photosystem II. These compounds provide a platform to theoretically and experimentally explore and expand proton-coupled electron transfer (PCET) processes. The models feature H-bonds between the phenol and the nitrogen at the 3-position of the benzimidazole and between the 1 H-benzimidazole proton and the imine nitrogen. Protonation of the benzimidazole and the imine can be unambiguously detected by infrared spectroelectrochemistry (IRSEC) upon oxidation of the phenol. DFT calculations and IRSEC results demonstrate that with sufficiently strong electron-donating groups at the para-position of the N-phenylimine group (e.g., -OCH3 substitution), proton transfer to the imine is exergonic upon phenol oxidation, leading to a one-electron, two-proton (E2PT) product with the imidazole acting as a proton relay. When transfer of the second proton is not sufficiently exergonic (e.g., -CN substitution), a one-electron, one-proton transfer (EPT) product is dominant. Thus, the extent of proton translocation along the H-bond network, either â¼1.6 Å or â¼6.4 Å, can be controlled through imine substitution. Moreover, the H-bond strength between the benzimidazole NH and the imine nitrogen, which is a function of their relative p Ka values, and the redox potential of the phenoxyl radical/phenol couple are linearly correlated with the Hammett constants of the substituents. In all cases, a high potential (â¼1 V vs SCE) is observed for the phenoxyl radical/phenol couple. Designing and tuning redox-coupled proton wires is important for understanding bioenergetics and developing novel artificial photosynthetic systems.
RESUMO
A porphyrin-fullerene C60 dyad (TCP-C60) substituted by carbazoyl groups was used to obtain electrogenerated polymeric films on optically transparent indium tin oxide (ITO) electrodes. This approach produced stable and reproducible polymers, holding fullerene units. The properties of this film were compared with those formed by layers of TCP/TCP-C60 and TCP/ZnTCP. Absorption spectra of the films presented the Soret and Q bands of the corresponding porphyrins. The TCP-C60 film produced a high photodecomposition of 2,2-(anthracene-9,10-diyl)bis(methylmalonate), which was used to detect singlet molecular oxygen O2((1)Δg) production in water. In addition, the TCP-C60 film induced the reduction of nitro blue tetrazolium to diformazan in the presence of NADH, indicating the formation of superoxide anion radical. Moreover, photooxidation of L-tryptophan mediated by TCP-C60 films was found in water. In biological media, photoinactivation of Staphylococcus aureus was evaluated depositing a drop with 2.5 × 10(3) cells on the films. After 30 min irradiation, no colony formation was detected using TCP-C60 or TCP/TCP-C60 films. Furthermore, photocytotoxic activity was observed in cell suspensions of S. aureus and Escherichia coli. The irradiated TCP-C60 film produced a 4 log decrease of S. aureus survival after 30 min. Also, a 4 log reduction of E. coli viability was obtained using the TCP-C60 film after 60 min irradiation. Therefore, the TCP-C60 film is an interesting and versatile photodynamic active surface to eradicate bacteria.
Assuntos
Eletricidade , Escherichia coli/efeitos dos fármacos , Fulerenos/química , Viabilidade Microbiana/efeitos dos fármacos , Fármacos Fotossensibilizantes/farmacologia , Polímeros/química , Porfirinas/química , Staphylococcus aureus/efeitos dos fármacos , Eletrodos , Cinética , Testes de Sensibilidade Microbiana , Oxirredução/efeitos dos fármacos , Análise Espectral , Fatores de Tempo , Triptofano/metabolismoRESUMO
In the photosynthetic photosystem II, electrons are transferred from the manganese-containing oxygen evolving complex (OEC) to the oxidized primary electron-donor chlorophyll P680(â¢+) by a proton-coupled electron transfer process involving a tyrosine-histidine pair. Proton transfer from the tyrosine phenolic group to a histidine nitrogen positions the redox potential of the tyrosine between those of P680(â¢+) and the OEC. We report the synthesis and time-resolved spectroscopic study of a molecular triad that models this electron transfer. The triad consists of a high-potential porphyrin bearing two pentafluorophenyl groups (PF(10)), a tetracyanoporphyrin electron acceptor (TCNP), and a benzimidazole-phenol secondary electron-donor (Bi-PhOH). Excitation of PF(10) in benzonitrile is followed by singlet energy transfer to TCNP (τ = 41 ps), whose excited state decays by photoinduced electron transfer (τ = 830 ps) to yield Bi-PhOH-PF(10)(â¢+)-TCNP(â¢-). A second electron transfer reaction follows (τ < 12 ps), giving a final state postulated as BiH(+)-PhO(â¢)-PF(10)-TCNP(â¢-), in which the phenolic proton now resides on benzimidazole. This final state decays with a time constant of 3.8 µs. The triad thus functionally mimics the electron transfers involving the tyrosine-histidine pair in PSII. The final charge-separated state is thermodynamically capable of water oxidation, and its long lifetime suggests the possibility of coupling systems such as this system to water oxidation catalysts for use in artificial photosynthetic fuel production.
Assuntos
Clorofila/química , Modelos Químicos , Complexo de Proteína do Fotossistema II/química , Prótons , Água/química , Transporte de Elétrons , OxirreduçãoRESUMO
The development of functional organic materials is crucial for the advancement of various fields, such as optoelectronics, energy storage, sensing, and biomedicine. In this context, we successfully prepared a stable ambipolar perfluoroporphyrin-based polymeric film by electrochemical synthesis. Our strategy involved the synthesis of a novel tetra-pentafluorophenyl porphyrin covalently linked to four 3,4-ethylenedioxythiophene (EDOT) moieties. The resulting monomer, EDOT-TPPF16, was obtained through a straightforward synthetic approach with a good overall yield. The unique molecular structure of EDOT-TPPF16 serves a dual function, with EDOT moieties allowing electropolymerization for polymeric film formation, while the electron-acceptor porphyrin core enables electrochemical reduction and electron transport. The electrochemical polymerization permits the polymer (PEDOT-TPPF16) synthesis and film formation in a reproducible and controllable manner in one step at room temperature. Spectroelectrochemical experiments confirmed that the porphyrin retained its optoelectronic properties within the polymeric matrix after the electrochemical polymerization. The obtained polymeric material exhibited stable redox capabilities. Current charge-discharge cycles and electrochemical impedance spectroscopy of the electrochemically generated organic film demonstrated that the polymer could be applied as a promising active material in the development of supercapacitor energy storage devices.
RESUMO
We report the photophysical and electrochemical properties of phenol-pyrrolidino[60]fullerenes 1 and 2, in which the phenol hydroxyl group is ortho and para to the pyrrolidino group, respectively, as well as those of a phenyl-pyrrolidino[60]fullerene model compound, 3. For the ortho analog 1, the presence of an intramolecular hydrogen bond is supported by (1)H NMR and FTIR characterization. The redox potential of the phenoxyl radical-phenol couple in this architecture is 240 mV lower than that observed in the associated para compound 2. Further, the C(60) excited-state lifetime of the hydrogen-bonded compound 1 in benzonitrile is 260 ps, while the corresponding lifetime for 2 is identical to that of the model compound 3 at 1.34 ns. Addition of excess organic acid to a benzonitrile solution of 1 gives rise to a new species, 4, with an excited-state lifetime of 1.40 ns. In nonpolar aprotic solvents such as toluene, all three compounds have a C(60) excited-state lifetime of â¼1 ns. These results suggest that the presence of an intramolecular H-bond in 1 poises the potential of phenoxyl radical-phenol redox couple at a value that it is thermodynamically capable of reducing the photoexcited fullerene. This is not the case for the para analog 2 nor is it the case for the protonated species 4. This work illustrates that in addition to being used as light activated electron acceptors, pyrrolidino fullerenes are also capable of acting as built-in proton-accepting units that influence the potential of an attached donor when organized in an appropriate molecular design.
Assuntos
Técnicas Eletroquímicas , Fulerenos/química , Fenol/química , Pirrolidinonas/química , Ligação de Hidrogênio , Luz , Espectroscopia de Ressonância Magnética , Oxirredução , Prótons , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
A novel scanning probe microscope stage permits break junction measurements of single molecule conductance while the molecules are illuminated with visible light. We studied a porphyrin-fullerene dyad molecule designed to form a charge separated state on illumination. A significant fraction of illuminated molecules become more conductive, returning to a lower conductance in the dark, suggesting the formation of a long-lived charge separated state on the indium-tin oxide surface. Transient absorption spectra of these molecular layers are consistent with formation of a long-lived charge separated state, a finding with implications for the design of molecular photovoltaic devices.
Assuntos
Fulerenos/química , Microscopia de Tunelamento/métodos , Nanotecnologia/métodos , Porfirinas/química , Índio/química , Luz , Microscopia de Tunelamento/instrumentação , Nanotecnologia/instrumentação , Tamanho da Partícula , Propriedades de Superfície , Compostos de Estanho/químicaRESUMO
A photostable and photodynamic antimicrobial surface was successfully obtained and applied to photoinactivate microorganisms. This approach was based on the synthesis of a fullerene C60 derivative (EDOT-C60) where fullerene C60 is covalently linked to 3,4-ethylenedioxythiophene (EDOT) through a 1,3-dipolar cycloaddition reaction. This dual-functional monomer bears an EDOT center connected via an alkyl chain to a fullerene C60 moiety. In this structure, EDOT acts as an electropolymerizable unit that allows the film formation over conducting substrates, while fullerene C60 performs the photodynamic antimicrobial activity. Electrochemical polymerization of EDOT was used to obtain stable and photodynamic polymeric films (PEDOT-C60) in a controllable procedure. Cyclic voltammetry and UV-visible spectroscopy studies showed that the fullerene C60 units were not altered during the electropolymerization process, obtaining surfaces with high fullerene content. Photobleaching measurements demonstrated that the electropolymerized films were highly photostable. Moreover, photodynamic properties of PEDOT-C60 were compared with fullerene C60 and showed that electrodeposited films were able to generate reactive oxygen species (ROS) through the two photomechanisms, producing singlet molecular oxygen (type II) and superoxide radical anion (type I). All studies demonstrated that fullerene C60 moieties covalently attached to the polymeric matrix mainly conserve the photodynamic characteristics. Hence, photodynamic action sensitized by PEDOT-C60 was assessed in vitro against Staphylococcus aureus. The photosensitized inactivation by the electropolymerized films on bacteria suspensions produced >99.9% reduction in S. aureus survival. Fluorescence microscopy experiments with S. aureus adhered to the PEDOT-C60 surface showed a complete microbe annihilation. Also, the eradication of biofilms formed on PEDOT-C60 surfaces resulted in a photokilling >99.9% after visible light irradiation. Our results demonstrated that these antimicrobial photodynamic polymeric films are a promising and versatile platform to photoinactivate microorganisms and to obtain photostable self-sterilizing surfaces.
RESUMO
A hole- and electron-conducting polymer has been prepared by electropolymerization of a porphyrin-fullerene monomer. The porphyrin units are linked by aminophenyl groups to form a linear chain in which the porphyrin is an integral part of the polymer backbone. The absorption spectrum of a film formed on indium-tin-oxide-coated glass resembles that of a model porphyrin-fullerene dyad, but with significant peak broadening. The film demonstrates a first oxidation potential of 0.75 V vs. SCE, corresponding to oxidation of the porphyrin polymer, and a first reduction potential of -0.63 V vs. SCE, corresponding to fullerene reduction. Time-resolved fluorescence studies show that the porphyrin first excited singlet state is strongly quenched by photoinduced electron transfer to fullerene. Transient absorption investigations reveal that excitation generates mobile charge carriers that recombine by both geminate and nongeminate pathways over a large range of time scales. Similar studies on a related polymer that lacks the fullerene component show complex, laser-intensity-dependent photoinduced electron transfer behavior. The properties of the porphyrin-fullerene electropolymer suggest that it may be useful in organic photovoltaic applications, wherein light absorption leads to charge separation within picoseconds in a "molecular heterojunction" with no requirement for exciton migration.
Assuntos
Fulerenos/química , Processos Fotoquímicos , Polímeros/química , Porfirinas/química , Absorção , Condutividade Elétrica , Eletroquímica , Transporte de Elétrons , Espectrometria de Massas , Permeabilidade , Polímeros/síntese química , Espectroscopia de Infravermelho com Transformada de Fourier , Fatores de TempoRESUMO
Designing molecular platforms for controlling proton and electron movement in artificial photosynthetic systems is crucial to efficient catalysis and solar energy conversion. The transfer of both protons and electrons during a reaction is known as proton-coupled electron transfer (PCET) and is used by nature in myriad ways to provide low overpotential pathways for redox reactions and redox leveling, as well as to generate bioenergetic proton currents. Herein, we describe theoretical and electrochemical studies of a series of bioinspired benzimidazole-phenol (BIP) derivatives and a series of dibenzimidazole-phenol (BI2P) analogs with each series bearing the same set of terminal proton-accepting (TPA) groups. The set of TPAs spans more than 6 pK a units. These compounds have been designed to explore the role of the bridging benzimidazole(s) in a one-electron oxidation process coupled to intramolecular proton translocation across either two (the BIP series) or three (the BI2P series) acid/base sites. These molecular constructs feature an electrochemically active phenol connected to the TPA group through a benzimidazole-based bridge, which together with the phenol and TPA group form a covalent framework supporting a Grotthuss-type hydrogen-bonded network. Infrared spectroelectrochemistry demonstrates that upon oxidation of the phenol, protons translocate across this well-defined hydrogen-bonded network to a TPA group. The experimental data show the benzimidazole bridges are non-innocent participants in the PCET process in that the addition of each benzimidazole unit lowers the redox potential of the phenoxyl radical/phenol couple by 60 mV, regardless of the nature of the TPA group. Using a series of hypothetical thermodynamic steps, density functional theory calculations correctly predicted the dependence of the redox potential of the phenoxyl radical/phenol couple on the nature of the final protonated species and provided insight into the thermodynamic role of dibenzimidazole units in the PCET process. This information is crucial for developing molecular "dry proton wires" with these moieties, which can transfer protons via a Grotthuss-type mechanism over long distances without the intervention of water molecules.
RESUMO
A novel biscarbazol triphenylamine end-capped dendrimeric zinc(II) porphyrin (DP 5) was synthesized by click chemistry. This compound is a cruciform dendrimer that bears a nucleus of zinc(II) tetrapyrrolic macrocycle substituted at the meso positions by four identical substituents. These are formed by a tetrafluorophenyl group that possesses a triazole unit in the para position. This nitrogenous heterocyclic is connected to a 4,4'-di(N-carbazolyl)triphenylamine group by means of a phenylenevinylene bridge, which allows the conjugation between the nucleus and this external electropolymerizable carbazoyl group. In this structure, dendrimeric arms act as light-harvesting antennas, increasing the absorption of blue light, and as electroactive moieties. The electrochemical oxidation of the carbazole groups contained in the terminal arms of the DP 5 was used to obtain novel, stable, and reproducible fully π-conjugated photoactive polymeric films (FDP 5). First, the spectroscopic characteristics and photodynamic properties of DP 5 were compared with its constitutional components derived of porphyrin P 6 and carbazole D 7 moieties in solution. The fluorescence emissions of the dendrimeric units in DP 5 were more strongly quenched by the tetrapyrrolic macrocycle, indicating photoinduced energy transfer. In addition, FDP 5 film showed the Soret and Q absorption bands and red fluorescence emission of the corresponding zinc(II) porphyrin. Also, FDP 5 film was highly stable to photobleaching, and it was able to produce singlet molecular oxygen in both N,N-dimethylformamide (DMF) and water. Therefore, the porphyrin units embedded in the polymeric matrix of FDP 5 film mainly retain the photochemical properties. Photodynamic inactivation mediated by FDP 5 film was investigated in Staphylococcus aureus and Escherichia coli. When a cell suspension was deposited on the surface, complete eradication of S. aureus and a 99% reduction in E. coli survival were found after 15 and 30 min of irradiation, respectively. Also, FDP 5 film was highly effective to eliminate individual bacteria attached to the surface. In addition, photodynamic inactivation (PDI) sensitized by FDP 5 film produced >99.99% bacterial killing in biofilms formed on the surface after 60 min irradiation. The results indicate that FDP 5 film represents an interesting and versatile photodynamic active material to eradicate bacteria as planktonic cells, individual attached microbes, or biofilms.
Assuntos
Anti-Infecciosos/química , Carbazóis/química , Dendrímeros/química , Escherichia coli/crescimento & desenvolvimento , Membranas Artificiais , Metaloporfirinas/química , Staphylococcus aureus Resistente à Meticilina/crescimento & desenvolvimentoRESUMO
The Clostridium acetobutylicum [FeFe]-hydrogenase HydA has been investigated as a hydrogen production catalyst in a photoelectrochemical biofuel cell. Hydrogenase was adsorbed to pyrolytic graphite edge and carbon felt electrodes. Cyclic voltammograms of the immobilized hydrogenase films reveal cathodic proton reduction and anodic hydrogen oxidation, with a catalytic bias toward hydrogen evolution. When corrected for the electrochemically active surface area, the cathodic current densities are similar for both carbon electrodes, and approximately 40% of those obtained with a platinum electrode. The high surface area carbon felt/hydrogenase electrode was subsequently used as the cathode in a photoelectrochemical biofuel cell. Under illumination, this device is able to oxidize a biofuel substrate and reduce protons to hydrogen. Similar photocurrents and hydrogen production rates were observed in the photoelectrochemical biofuel cell using either hydrogenase or platinum cathodes.
Assuntos
Fontes de Energia Bioelétrica , Hidrogênio/química , Hidrogenase/química , Proteínas Ferro-Enxofre/química , Catálise , Clostridium acetobutylicum/enzimologia , Eletroquímica , Eletrodos , Enzimas Imobilizadas/química , Membranas Artificiais , Modelos Moleculares , Estrutura Molecular , Fotoquímica , Platina/química , Porfirinas/química , Sensibilidade e Especificidade , Propriedades de Superfície , Titânio/químicaRESUMO
A bioinspired hybrid system, composed of colloidal TiO2 nanoparticles surface modified with a photochemically active mimic of the PSII chlorophyll-Tyr-His complex, undergoes photoinduced stepwise electron transfer coupled to proton motion at the phenolic site. Low temperature electron paramagnetic resonance studies reveal that injected electrons are localized on TiO2 nanoparticles following photoexcitation. At 80 K, 95% of the resulting holes are localized on the phenol moiety and 5% are localized on the porphyrin. At 4.2 K, 52% of the holes remain trapped on the porphyrin. The anisotropic coupling tensors of the phenoxyl radical are resolved in the photoinduced D-band EPR spectra and are in good agreement with previously reported g-tensors of tyrosine radicals in photosystem II. The observed temperature dependence of the charge shift is attributed to restricted nuclear motion at low temperature and is reminiscent of the observation of a trapped high-energy state in the natural system. Electrochemical studies show that the phenoxyl/phenol couple of the model system is chemically reversible and thermodynamically capable of water oxidation.
Assuntos
Clorofila/química , Nanopartículas/química , Complexo de Proteína do Fotossistema II/química , Titânio/química , Espectroscopia de Ressonância de Spin Eletrônica , Transporte de Elétrons , Histidina/química , Oxirredução , Fotoquímica , Prótons , Temperatura , Tirosina/química , Água/químicaRESUMO
A hexaphenylbenzene-based zinc porphyrin dyad forms a 1:1 complex with a fullerene bearing two pyridyl groups via coordination of the pyridyl nitrogens with the zinc atoms. The fullerene is symmetrically located between the two zinc porphyrins. The binding constant for the complex is 7.3 x 10(4) M(-1) in 1,2-difluorobenzene. Photoinduced electron transfer from a porphyrin first excited singlet state to the fullerene occurs with a time constant of 3 ps, and the resulting charge-separated state has a lifetime of 230 ps. This self-assembled construct should form a basis for the construction of more elaborate model photosynthetic antenna-reaction center systems.
RESUMO
Two artificial photosynthetic antenna models consisting of a Si phthalocyanine (Pc) bearing two axially attached carotenoid moieties having either 9 or 10 conjugated double bonds are used to illustrate some of the function of carotenoids in photosynthetic membranes. Both models studied in toluene, methyltetrahydrofuran, and benzonitrile exhibited charge separated states of the type C*+-Pc*- confirming that the quenching of the Pc S1 state is due to photoinduced electron transfer. In hexane, the Pc S1 state of the 10 double bond carotenoid-Pc model was slightly quenched but the C*+-Pc*- transient was not spectroscopically detected. A semiclassical analysis of the data in hexane at temperatures ranging from 180 to 320 K was used to demonstrate that photoinduced electron transfer could occur. The model bearing the 10 double bond carotenoids exhibits biexponential fluorescence decay in toluene and in hexane, which is interpreted in terms of an equilibrium mixture of two isomers comprising s-cis and s-trans conformers of the carotenoid. The shorter fluorescence lifetime is associated with an s-cis carotenoid conformer where the close approach between the donor and acceptor moieties provides through-space electronic coupling in addition to the through-bond component.
Assuntos
Carotenoides/química , Indóis/química , Membranas Artificiais , Compostos de Organossilício/química , Tetrapirróis/química , Eletroquímica , Indóis/efeitos da radiação , Isoindóis , Modelos Biológicos , Estrutura Molecular , Compostos de Organossilício/efeitos da radiação , Fotossíntese , Estereoisomerismo , Temperatura , Fatores de TempoRESUMO
Free-base (P), Zn(II) (P(Zn)), Cu(II) (P(Cu)), Pd(II) (P(Pd)), Ni(II) (P(Ni)), and Co(II) (P(Co)) 5-(4-carboxyphenyl)-10,15,20-tris(4-methylphenyl) porphyrins were designed and synthesized to be employed as spectral senzitizers in photoelectrochemical cells. The dyes were studied adsorbed on SnO(2) nanocrystalline semiconductor and also in Langmuir-Blodgett film ITO electrodes in order to disclose the effect of molecular packing on the studied properties. Electron injection yields were obtained by fluorescence quenching analysis comparing with the dyes adsorbed on a SiO(2) nanocrystalline insulator. Back electron-transfer kinetics were measured by using laser flash photolysis. The unmetallized and metallized molecules have different singlet state energies, fluorescence quantum yields, and redox properties. The quantum yields of sensitized photocurrent generation are shown to be highly dependent on the identity of the central metal. It is shown that P(Ni) and P(Co) do not present a photoelectric effect. The other porhyrins present reproducible photocurrent, P(Pd) being the one that gives the highest quantum yield even in closely packet ITO/LB films. Photocurrent quantum yields increase as the dye ground-state oxidation potential becomes more anodic, which is in agreement with the observation, obtained by laser flash photolysis, that back electron-transfer kinetics decrease with the increase in the driving force for the recombination process. This effect could be exploited as a design element in the development of new and better sensitizers for high-efficiency solar cells involving porphyrins and related dyes.
RESUMO
A new dye, SSD1, featuring two donor/acceptor chromophores aligned in a spiro configuration with two anchoring groups separated at a distance of 10.05 A (closely matching the distance between the adsorption sites of the anatase TiO(2) surface) undergoes efficient dye adherence on TiO(2) films. A dye-sensitized solar cell incorporating SSD1 exhibited a short-circuit current of 8.9 mA cm(-2), an open-circuit voltage of 0.63 V, a fill factor of 0.67, and a power conversion efficiency of 3.75%.
RESUMO
One molecule acts as both an AND and an XOR Boolean logic gate that share the same two photonic inputs. The molecule comprises a half-adder, adding two binary digits with only light as inputs and outputs, and consists of three covalently linked photochromic moieties, a spiropyran and two quinoline-derived dihydroindolizines. The AND function is based on the absorption properties of the molecule, whereas the XOR function is based on an off-on-off response of the fluorescence to the inputs that results from interchromophore excited-state quenching interactions. The half-adder is simple to operate and can be cycled many times.
RESUMO
We have designed and synthesized a molecular dyad comprising a carotenoid pigment linked to a fullerene derivative (C-C(60)) in which the carotenoid acts both as an antenna for the fullerene and as an electron transfer partner. Ultrafast transient absorption spectroscopy was carried out on the dyad in order to investigate energy transfer and charge separation pathways and efficiencies upon excitation of the carotenoid moiety. When the dyad is dissolved in hexane energy transfer from the carotenoid S(2) state to the fullerene takes place on an ultrafast (sub 100 fs) timescale and no intramolecular electron transfer was detected. When the dyad is dissolved in toluene, the excited carotenoid decays from its excited states both by transferring energy to the fullerene and by forming a charge-separated C.+ -C(60).- . The charge-separated state is also formed from the excited fullerene following energy transfer from the carotenoid. These pathways lead to charge separation on the subpicosecond time scale (possibly from the S(2) state and the vibrationally excited S(1) state of the carotenoid), on the ps time scale (5.5 ps) from the relaxed S(1) state of the carotenoid, and from the excited state of C(60) in 23.5 ps. The charge-separated state lives for 1.3 ns and recombines to populate both the low-lying carotenoid triplet state and the dyad ground state.