Regioselective Hydroxylation of Unsymmetrical Ketones Using Cu, H2O2, and Imine Directing Groups via Formation of an Electrophilic Cupric Hydroperoxide Core.

Herein, we describe the regioselective functionalization of unsymmetrical ketones using imine directing groups, Cu, and H2O2. The C-H hydroxylation of the substrate-ligands derived from 2-substituted benzophenones occurred exclusively at the γ-position of the unsubstituted ring due to the formation of only one imine stereoisomer. Conversely, the imines derived from 4-substituted benzophenones produced E/Z mixtures that upon reacting with Cu and H2O2 led to two γ-C-H hydroxylation products. Contrary to our initial hypothesis, the ratio of the hydroxylation products did not depend on the ratio of the E/Z isomers but on the electrophilicity of the reactive [LCuOOH]1+. A detailed mechanistic analysis suggests a fast isomerization of the imine substrate-ligand binding the CuOOH core before the rate-determining electrophilic aromatic hydroxylation. Varying the benzophenone substituents and/or introducing electron-donating and electron-withdrawing groups on the 4-position of pyridine of the directing group allowed for fine-tuning of the electrophilicity of the mononuclear [LCuOOH]1+ to reach remarkable regioselectivities (up to 91:9 favoring the hydroxylation of the electron-rich arene ring). Lastly, we performed the C-H hydroxylation of alkyl aryl ketones, and like in the unsymmetrical benzophenones, the regioselectivity of the transformations (sp3 vs sp2) could be controlled by varying the electronics of the substrate and/or the directing group.

Full configurational and conformational analysis of artemisinin by one-bond carbon-carbon residual dipolar couplings at natural abundance.

Configurational and conformational analysis of the biologically relevant natural product artemisinin was conducted using carbon-carbon residual dipolar couplings (1DCC RDCs) at natural abundance. These RDCs were measured through the 2D-INADEQUATE NMR experiment using a sample aligned in a compressed poly (methyl methacrylate) (PMMA) gel swollen in CDCl3. Singular value decomposition (SVD) fitting analysis of all carbon-carbon bonds, 1DCC RDCs, in relation to the full configuration/conformational space (32 diastereoisomers) of artemisinin, unambiguously identified the correct configuration of artemisinin.

Effect of the solvent on the conformation of monocrotaline as determined by isotropic and anisotropic NMR parameters.

The conformation in solution of monocrotaline, a pyrrolizidine alkaloid presenting an eleven-membered macrocyclic diester ring, has been investigated using a combination of isotropic and anisotropic nuclear magnetic resonance parameters measured in four solvents of different polarity (D2 O, DMSO-d6 , CDCl3 , and C6 D6 ). Anisotropic nuclear magnetic resonance parameters were measured in different alignment media, based on their compatibility with the solvent of interest: cromoglycate liquid crystal solution was used for D2 O, whereas a poly (methyl methacrylate) polymer gel was chosen for CDCl3 and C6 D6 , and a poly (hydroxyethyl methacrylate) gel for DMSO-d6 . Whereas the pyrrolizidine ring shows an E6 exo-puckered conformation in all of the solvents, the macrocyclic eleven-membered ring adopts different populations of syn-parallel and anti-parallel relative orientation of the carbonyl groups according to the polarity of the solvent.

Cross-Linked Poly-4-Acrylomorpholine: A Flexible and Reversibly Compressible Aligning Gel for Anisotropic NMR Analysis of Peptides and Small Molecules in Water.

Determination of the solution conformation of both small organic molecules and peptides in water remains a substantial hurdle in using NMR solution conformations to guide drug design due to the lack of easy to use alignment media. Herein we report the design of a flexible compressible chemically cross-linked poly-4-acrylomorpholine gel that can be used for the alignment of both small molecules and cyclic peptides in water. To test the new gel, residual dipolar couplings (RDCs) and J-coupling constants were used in the configurational analysis of strychnine hydrochloride, a molecule that has been studied extensively in organic solvents as well as a small cyclic peptide that is known to form an α-helix in water. The conformational ensembles for each molecule with the best fit to the data are reported. Identification of minor conformers in water that cannot easily be determined by conventional NOE measurements will facilitate the use of RDC experiments in structure-based drug design.

Deuterium Residual Quadrupolar Couplings: Crossing the Current Frontiers in the Relative Configuration Analysis of Natural Products.

The determination of the 3D structure (configuration and preferred conformation) of complex natural and synthetic organic molecules is a long-standing but still challenging task for chemists, with various implications in pharmaceutical sciences whether or not these substances have specific bioactivities. Nuclear magnetic resonance (NMR) in aligning media, either lyotropic liquid crystals (LLCs) or polymer gels, in combination with molecular modeling is a unique framework for solving complex structural problems whose analytical wealth lies in the establishment of nonlocal structural correlations. As an alternative to the already well-established anisotropic NMR parameters, such as RDCs (residual dipolar couplings) and RCSAs (residual chemical shift anisotropies), it is shown here that deuterium residual quadrupolar couplings (2H-RQCs) can be extracted from 2H 2D-NMR spectra recorded at the natural abundance level in samples oriented in a homopolypeptide LLCs (poly-γ-benzyl-l-glutamate (PBLG)). These 2H-RQCs were successfully used to address nontrivial structural problems in organic molecules. The performance and scope of this new tool is examined for two natural chiral compounds of pharmaceutical interest (strychnine and artemisinin). This is the first report in which the 3D structure/relative configuration of complex bioactive molecules is unambiguously determined using only 2H-RQCs, which, in this case, are at 2H natural abundance.

Computer-Assisted 3D Structure Elucidation (CASE-3D): The Structural Value of 2 JCH in Addition to 3 JCH Coupling Constants.

We present a method to use long-range CH coupling constants to derive the correct diastereoisomer from the molecular constitution of small molecules. A set of 79 2 JCH and 3 JCH values collected from a single HSQMBC experiment on a sample of strychnine were used in the CASE-3D (computer-assisted 3D structure elucidation) protocol. In addition to the most commonly used 3 JCH coupling constants, the subset of 32 2 JCH values alone showed an excellent degree of configuration selection. The study is mainly based on comparison of DFT-calculated 2,3 JCH values with experimental ones, critical for the case of 2 JCH . But the configuration selection also works well using 3 JCH values predicted from a semi-empirical Karplus-based equation limited to H-C-C-C fragments. The robustness, shown using strychnine as a proof of concept, makes the J-based CASE-3D analysis a viable option for the application in fields such as peptide and carbohydrate research, organic synthesis, natural-product identification and analysis, as well as medicinal chemistry.

Cyclic Peptide Design Guided by Residual Dipolar Couplings, J-Couplings, and Intramolecular Hydrogen Bond Analysis.

Cyclic peptides have long tantalized drug designers with their potential ability to combine the best attributes of antibodies and small molecules. An ideal cyclic peptide drug candidate would be able to recognize a protein surface like an antibody while achieving the oral bioavailability of a small molecule. It has been hypothesized that such cyclic peptides balance permeability and solubility using their solvent-dependent conformational flexibility. Herein we report a conformational deconvolution NMR methodology that combines residual dipolar couplings, J-couplings, and intramolecular hydrogen bond analysis along with conformational analysis using molecular dynamics simulations and density functional theory calculations for studying cyclic peptide conformations in both low-dielectric solvent (chloroform) and high-dielectric solvent (DMSO) to experimentally study the solvent-dependent conformational change hypothesis. Taken together, the combined experimental and computational approaches can illuminate conformational ensembles of cyclic peptides in solution and help identify design opportunities for better permeability.

Design of Bivalent Nucleic Acid Ligands for Recognition of RNA-Repeated Expansion Associated with Huntington's Disease.

We report the development of a new class of nucleic acid ligands that is comprised of Janus bases and the MPγPNA backbone and is capable of binding rCAG repeats in a sequence-specific and selective manner via, inference, bivalent H-bonding interactions. Individually, the interactions between ligands and RNA are weak and transient. However, upon the installation of a C-terminal thioester and an N-terminal cystine and the reduction of disulfide bond, they undergo template-directed native chemical ligation to form concatenated oligomeric products that bind tightly to the RNA template. In the absence of an RNA target, they self-deactivate by undergoing an intramolecular reaction to form cyclic products, rendering them inactive for further binding. The work has implications for the design of ultrashort nucleic acid ligands for targeting rCAG-repeat expansion associated with Huntington's disease and a number of other related neuromuscular and neurodegenerative disorders.

New Stretching Method for Aligning Gels: Its Application to the Measurement Residual Chemical Shift Anisotropies (RCSAs) without the Need for Isotropic Shift Correction.

An existing gel stretching device is modified, permitting the use of organic solvents for the study of small molecules. Different from the original device, gels are stretched into 4 mm open-ended NMR tubes and then inserted into regular 5 mm NMR tubes. No open-ended tubes are inserted in the NMR probe avoiding the risk of sample leaking. It is also shown that residual chemical shift anisotropies (RCSAs) measured with the device are free of isotropic shift interferences and corrections for them are not needed during the post-acquisition data analysis. Three internal references for chemical shift were evaluated (CCl4 , CBr4 and TMS), being CCl4 the most convenient one to measure RCSAs in CDCl3 . RCSAs measured with the modified stretching device using CCl4 as the internal chemical shift reference were enough to determine the relative configuration of three small molecules with an excellent degree of configuration discrimination.

Isotropic/Anisotropic NMR Editing by Resolution-Enhanced NMR Spectroscopy.

Modern resolution-enhanced NMR techniques can monitor the in situ discrimination of co-existing isotropic and anisotropic contributions of small molecules dissolved in weakly aligning PMMA/CDCl3 media. The simultaneous sign-sensitive determination of accurate Δδiso-aniso (1 H), Δδiso-aniso (13 C) and/or isotropic 1 JCH and anisotropic 1 TCH coupling constants (and consequently 1 H-13 C residual dipolar couplings and 1 H/13 C residual chemical shift anisotropies) can be performed from spectral-aliased heteronuclear single-quantum correlation spectra.

Computer-Assisted 3D Structure Elucidation (CASE-3D) of Natural Products Combining Isotropic and Anisotropic NMR Parameters.

A computer-assisted structural elucidation (CASE-3D) strategy based on the use of isotropic and/or anisotropic NMR data is proposed to elucidate relative configuration and preferred conformation in complex natural products. The methodology involves the selection of conformational models through the use of the Akaike Information Criterion and scoring of the different configurations. As illustrative examples, the methodology furnished the correct configuration of the already known compounds artemisinin (1) and homodimericin A (2). Revised structures (5 and 6), including their absolute configuration, for the recently reported curcusones I (3) and J (4) are proposed.

Phytochemical Study of Senecio volckmannii Assisted by CASE-3D with Residual Dipolar Couplings and Isotropic 1H/13C NMR Chemical Shifts.

Nine new eremophilanolides, with seven known sesquiterpenoids, and 4-hydroxyacetophenone were isolated from the aerial parts of Senecio volckmannii var. volckmannii. The structures of these compounds were fully characterized using a combination of spectroscopic techniques including multinuclear and multidimensional NMR and mass spectrometry. The recently published Computer Assisted 3D Structure Elucidation (CASE-3D) protocol was applied in the configurational and conformational analysis of many of these eremophilanolides on the basis of Residual Dipolar Couplings (RDCs) and/or DFT predicted 1H/13C chemical shifts.

Measurement of residual chemical shift anisotropies in compressed polymethylmethacrylate gels. Automatic compensation of gel isotropic shift contribution.

Mechanical compression of polymer gels provides a simple way for the measurement of residual chemical shift anisotropies, which then can be employed, on its own, or in combination with residual dipolar couplings, for structural elucidation purposes. Residual chemical shift anisotropies measured using compression devices needed a posteriori correction to account for the increase of the polymer to solvent ratio inside the swollen gel. This correction has been cast before in terms of a single-free parameter which, as shown here, can be simultaneously optimized along with the components of the alignment tensor while still retaining discriminating power of the different relative configurations as illustrated in the stereochemical analysis of α-santonin and 10-epi-8-deoxycumambrin B.

NMReDATA, a standard to report the NMR assignment and parameters of organic compounds.

Even though NMR has found countless applications in the field of small molecule characterization, there is no standard file format available for the NMR data relevant to structure characterization of small molecules. A new format is therefore introduced to associate the NMR parameters extracted from 1D and 2D spectra of organic compounds to the proposed chemical structure. These NMR parameters, which we shall call NMReDATA (for nuclear magnetic resonance extracted data), include chemical shift values, signal integrals, intensities, multiplicities, scalar coupling constants, lists of 2D correlations, relaxation times, and diffusion rates. The file format is an extension of the existing Structure Data Format, which is compatible with the commonly used MOL format. The association of an NMReDATA file with the raw and spectral data from which it originates constitutes an NMR record. This format is easily readable by humans and computers and provides a simple and efficient way for disseminating results of structural chemistry investigations, allowing automatic verification of published results, and for assisting the constitution of highly needed open-source structural databases.

Homogeneous Catalysis Under Ultradilute Conditions: TAML/NaClO Oxidation of Persistent Metaldehyde.

TAML activators enable homogeneous oxidation catalysis where the catalyst and substrate (S) are ultradilute (pM-low µM) and the oxidant is very dilute (high nM-low mM). Water contamination by exceptionally persistent micropollutants (MPs), including metaldehyde (Met), provides an ideal space for determining the characteristics and utilitarian limits of this ultradilute catalysis. The low MP concentrations decrease throughout catalysis with S oxidation (kII) and catalyst inactivation (ki) competing for the active catalyst. The percentage of substrate converted (%Cvn) can be increased by discovering methods to increase kII/ki. Here we show that NaClO extends catalyst lifetime to increase the Met turnover number (TON) 3-fold compared with H2O2, highlighting the importance of oxidant choice as a design tool in TAML systems. Met oxidation studies (pH 7, D2O, 0.01 M phosphate, 25 °C) monitored by 1H NMR spectroscopy show benign acetic acid as the only significant product. Analysis of TAML/NaClO treated Met solutions employing successive identical catalyst doses revealed that the processes can be modeled by the recently published relationship between the initial and final [S] (S0 and S∞, respectively), the initial [catalyst] (FeTot) and kII/ki. Consequently, this study establishes that ΔS is proportional to S0 and that the %Cvn is conserved across all catalyst doses in multicatalyst-dose processes because the rate of the kII process depends on [S] while that of the ki process does not. A general tool for determining the FeTot required to effect a desired %Cvn is presented. Examination of the dependence of TON on kII/ki and FeTot at a fixed S0 indicates that for any TAML process employing FeTot < 1 × 10-6 M, small catalyst doses are not more efficient than one large dose.

1JCH NMR Profile: Identification of Key Structural Features and Functionalities by Visual Observation and Direct Measurement of One-Bond Proton-Carbon Coupling Constants.

A user-friendly NMR interface for the visual and accurate determination of experimental one-bond proton-carbon coupling constants (1JCH) in small molecules is presented. This intuitive 1JCH profile correlates directly to δ(1H), and 1JCH facilitates the rapid identification and assignment of 1H signals belonging to key structural elements and functional groups. Illustrative examples are provided for some target molecules, including terminal alkynes, strained rings, electronegative substituents, or lone-pair-bearing heteronuclei.

Application of Residual Dipolar Couplings and Selective Quantitative NOE to Establish the Structures of Tetranortriterpenoids from Xylocarpus rumphii.

Nine triterpenoid derivatives were isolated from the heartwood of Xylocarpus rumphii and were identified as xylorumphiins E (1), C (2), L (3), and M-R (4-9). Compounds 4-9 have a hemiacetal group in the triterpenoid side chain, making them impossible to purify. Purification was achieved after acetylation and subsequent separation of the epimeric mixtures of acetates; however differentiaition of the R and S epimers was not possible using standard NMR techniques. In one case, the relative configuration of a remotely located stereocenter with respect to the stereocenters in the main skeleton was unambiguously determined using residual dipolar couplings. Dipolar couplings were collected from the sample oriented in compressed poly(methyl methacrylate) gels swollen in CDCl3. In another case, the relative configuration was determined using 1D selective quantitative NOE experiments. Xylorumphiin K (10), xyloccensin E, taraxer-14-en-3ß-ol, (22S)-hydroxytirucalla-7,24-diene-3,23-dione, and 25-hydroxy-(20S,24S)-epoxydammaran-3-one were isolated from the bark of the same plant. Compounds 3-10 are new compounds. Compounds 1-6 and xyloccensin E were tested at one concentration, 1 × 10-5 M, in the NCI59 cell one-dose screen but did not show significant activity.

Structural discrimination from in situ measurement of 1 DCH and 2 DHH residual dipolar coupling constants.

A fast residual dipolar coupling constant-assisted strategy involving the simultaneous determination of scalar and total coupling constants from a single 1 JCH /2 JHH -resolved NMR spectrum is reported. It is shown that the concerted use of the directly measured 1 DCH (for all CHn multiplicities) and 2 DHH residual dipolar couplings allows an on-the-fly assignment of diastereotopic CH2 protons, as well as of an efficient discrimination between diastereoisomeric structures of strychnine which contains six stereocenters. Copyright © 2017 John Wiley & Sons, Ltd.

Di(ethylene glycol) methyl ether methacrylate (DEGMEMA)-derived gels align small organic molecules in methanol.

Residual dipolar couplings (RDCs) constitute an important NMR parameter for structural elucidation in all areas of chemistry. In this study, di(ethylene glycol) methyl ether methacrylate (DEGMEMA)-based gels are introduced as alignment media for the measurement of RDCs of small organic molecules in polar solvents such as methanol. The low viscosity of methanol permits the execution of J-scaled BIRD HSQC experiments that yield very sharp lines in anisotropic conditions. The gels have excellent mechanical properties, and their compression and expansion in the swollen state can be reversed and performed multiple times. This process enables the easy loading and release of analytes. The excellent performance of these new aligning gels is demonstrated by analyzing the structure of the alkaloid retrorsine. Copyright © 2016 John Wiley & Sons, Ltd.