Durum wheat breads 'high in fibre' and with reduced in vitro glycaemic response obtained by partial semolina replacement with minor cereals and pulses.

The aim of this study was to develop fortified breads of durum wheat semolina (DW) partially substituted at 10%, 15%, 20% and 30% with white sorghum or yellow pea wholemeal flours (WS, YP, respectively) or using wholemeal flour from a natural mixture of rye and durum wheat (RDW). The physico-chemical composition of the raw materials, rheological properties of dough, the bread quality characteristics, glycaemic index and sensory quality of bread were examined. Compared to 100% DW, 100% YP had twice the protein levels, RDW had almost three times the dietary fibre, while the colorimetric indices for WS and YP flour addition showed increased redness (for RDW) and similar yellowness (for YP). With respect to the control dough (100% DW), RDW and addition of WS or YP produced showed negative impact on water absorption (RDW, WS), stability (RDW, YP), dough strength (RDW, WS, YP), tenacity and extensibility ratio (RDW, YP), loaf volume (RDW, WS, YP), yellowness (RDW, WS) and sensory acceptance of bread (RDW, WS). However, these changes were counterbalanced by higher dietary fibre and lower glycaemic index of the breads, especially for RDW and at high additions of WS and YP (20-30%). Moreover, breads fortified with YP were better in terms of colour and overall acceptability scores.

Antioxidants and Phenolic Acid Composition of Wholemeal and Refined-Flour, and Related Biscuits in Old and Modern Cultivars Belonging to Three Cereal Species.

Cereals are a good source of phenolics and carotenoids with beneficial effects on human health. In this study, a 2-year evaluation was undertaken on grain, wholemeal and refined-flour of two cultivars, one old and one modern, belonging to three cereal species. Wholemeal of selected cultivars for each species was used for biscuit making. In the grain, some yield-related traits and proteins (PC) were evaluated. In the flours and biscuits, total polyphenols (TPC), flavonoids (TFC), proanthocyanidins (TPAC), carotenoids (TYPC) and antioxidant activities (DPPH and TEAC) were spectrophotometrically determined, whereas HPLC was used for the composition of soluble free and conjugated, and insoluble bound phenolic acids. Species (S), genotype (G) and 'SxG' were highly significant for yield-related and all antioxidant traits, whereas cropping year (Y) significantly affected yield-related traits, PC, TPC, TPAC, TEAC and 'SxGxY' interaction was significant for yield-related traits, TPAC, TYPC, TEAC, DPPH and all phenolic acid fractions. Apart from the TYPC that prevailed in durum wheat together with yield-related traits, barley was found to have significantly higher values for all the other parameters. Generally, the modern cultivars are richest in antioxidant compounds. The free and conjugated fractions were more representative in emmer, while the bound fraction was prevalent in barley and durum wheat. Insoluble bound phenolic acids represented 86.0% of the total, and ferulic acid was the most abundant in all species. A consistent loss of antioxidants was observed in all refined flours. The experimental biscuits were highest in phytochemicals than commercial control. Although barley biscuits were nutritionally superior, their lower consumer acceptance could limit their diffusion. New insights are required to find optimal formulations for better nutritional, sensorial and health biscuits.

Comparative Analysis of Qualitative and Bioactive Compounds of Whole and Refined Flours in Durum Wheat Grains with Different Year of Release and Yield Potential.

Durum wheat varieties are important sources of nutrients and provide remarkable amounts of phytochemicals. Especially, phenolics, which are mostly located in external layers of grains, have recently gained increased interest due to their high antioxidant power. This study aimed to evaluate the differences in the quality traits and phenolic compounds' concentration (e.g., phenolic acids) of different durum wheat genotypes, namely four Italian durum wheat cultivars and a USA elite variety, in relation to their yield potential and year of release. Phenolic acids were extracted both from wholemeal flour and semolina and analysed through HPLC-DAD analysis. Ferulic acid was the most represented phenolic acid, both in the wholemeal flour (438.3 µg g-1 dry matter) and in semolina (57.6 µg g-1 dry matter) across all cultivars, followed by p-coumaric acid, sinapic acid, vanillin, vanillic acid, syringic acid, and p-hydroxybenzoic acid. Among the cultivars, Cappelli showed the highest phenolic acid content, whilst Kronos had the lowest one. Negative correlations occurred between some phenolic acids and morphological and yield-related traits, especially for Nadif and Sfinge varieties. On the contrary, durum wheat genotypes with low yield potential such as Cappelli accumulated higher concentrations of phenolic acids under the same growing conditions, thereby significantly contributing to the health-promoting purposes.

Relationship between Seed Morphological Traits and Ash and Mineral Distribution along the Kernel Using Debranning in Durum Wheats from Different Geographic Sites.

Debranning was applied to durum wheat to the study the relationship between kernel shape and size, and ash and mineral distribution having implications for semolina yield. To this aim four durum wheat genotypes carried out over three environments were selected to determine the morphological and yield traits as well as the distribution along the kernel of the ash, macro- (Na, K, P, Ca, and Mg), and micro-elements (Mn, Fe, Cu, Zn, and Mo). A descendent ash gradient within the kernel reflects the decreases in the minerals that occurred during debranning. Perciasacchi with high seed weight (TKW) and greater thickness followed by Cappelli showed a more uniform distribution of ash content along the kernels. High r Pearson coefficient (p < 0.01) showed an inverse relationship between thickness and ash decay. Since thickness was strongly affected by the genotype, it could represent a useful trait for breeding programs to predict the milling quality.

Milling overrides cultivar, leavening agent and baking mode on chemical and rheological traits and sensory perception of durum wheat breads.

Smell and aroma are important determinants of consumer acceptance, so gaining deeper insight into bread smell and aroma perception is a research goal. Sixteen combinations of four variables were investigated, to evaluate the contributions of bread chemical and rheological properties and volatile organic compounds (VOCs) towards sensory acceptability of breads: genotypes (landrace vs. modern); types of flour (wholemeal vs. semolina); leavening agents (brewing yeast vs. sourdough starter); and baking modes (gas-fired vs. wood-fired). Milling had the greatest impact over the other treatments for the rheological and chemical properties, including for VOCs, with great impact on the sensory traits of the flours and breads. The processing phases had great impact on smell and aroma, as defined through formation of alcohols, aldehydes, terpenes, and other compounds (e.g., ethylbenzene, 2-pentylfuran, methoxyphenyl oxime). Leavening agent had great impact on sensory perception, although breads from the sourdough starter were perceived as with lower taste and colour than the brewing yeast. Baking mode had no relevant role on sensory perception. These data strongly undermine the belief of a 'better product' that is frequently attributed to old genotypes versus modern cultivars, and indicate that the milling and the bread-making processes determine the quality of the end product.

Use of purple durum wheat to produce naturally functional fresh and dry pasta.

In this study, the effects of different milling procedures (roller-milling vs. stone-milling) and pasta processing (fresh vs. dried spaghetti), and cooking on the antioxidant components and sensory properties of purple durum wheat were investigated. Milling and pasta processing were performed using one purple and one conventional non-pigmented durum wheat genotypes, and the end-products were compared with commercial pasta. The results show that the stone milling process preserved more compounds with high health value (total fibre and carotenoids, and in the purple genotype, also anthocyanins) compared to roller-milling. The drying process significantly (p<0.05) reduced the content of anthocyanins (21.42 µg/g vs. 46.32 µg/g) and carotenoids (3.77 µg/g vs. 4.04 µg/g) with respect to the pasteurisation process involved in fresh pasta production. The sensory properties of pasta from the purple genotype did not significantly differ from commercial wholemeal pasta, and its in vitro glycemic index was even lower. Thus, it is possible to consider this genetic material as a good ingredient for the production of functional foods from cereals naturally rich in bioactive compounds.

Identification of New Resistance Loci to African Stem Rust Race TTKSK in Tetraploid Wheats Based on Linkage and Genome-Wide Association Mapping.

Stem rust, caused by Puccinia graminis Pers. f. sp. tritici Eriks. and E. Henn. (Pgt), is one of the most destructive diseases of wheat. Races of the pathogen in the "Ug99 lineage" are of international concern due to their virulence for widely used stem rust resistance genes and their spread throughout Africa. Disease resistant cultivars provide one of the best means for controlling stem rust. To identify quantitative trait loci (QTL) conferring resistance to African stem rust race TTKSK at the seedling stage, we evaluated an association mapping (AM) panel consisting of 230 tetraploid wheat accessions under greenhouse conditions. A high level of phenotypic variation was observed in response to race TTKSK in the AM panel, allowing for genome-wide association mapping of resistance QTL in wild, landrace, and cultivated tetraploid wheats. Thirty-five resistance QTL were identified on all chromosomes, and seventeen are of particular interest as identified by multiple associations. Many of the identified resistance loci were coincident with previously identified rust resistance genes; however, nine on chromosomes 1AL, 2AL, 4AL, 5BL, and 7BS may be novel. To validate AM results, a biparental population of 146 recombinant inbred lines was also considered, which derived from a cross between the resistant cultivar "Cirillo" and susceptible "Neodur." The stem rust resistance of Cirillo was conferred by a single gene on the distal region of chromosome arm 6AL in an interval map coincident with the resistance gene Sr13, and confirmed one of the resistance loci identified by AM. A search for candidate resistance genes was carried out in the regions where QTL were identified, and many of them corresponded to NBS-LRR genes and protein kinases with LRR domains. The results obtained in the present study are of great interest as a high level of genetic variability for resistance to race TTKSK was described in a germplasm panel comprising most of the tetraploid wheat sub-species.