Measurement of Magnetic Cavitation Driven by Heat Flow in a Plasma.

We describe the direct measurement of the expulsion of a magnetic field from a plasma driven by heat flow. Using a laser to heat a column of gas within an applied magnetic field, we isolate Nernst advection and show how it changes the field over a nanosecond timescale. Reconstruction of the magnetic field map from proton radiographs demonstrates that the field is advected by heat flow in advance of the plasma expansion with a velocity v_{N}=(6±2)×10^{5} m/s. Kinetic and extended magnetohydrodynamic simulations agree well in this regime due to the buildup of a magnetic transport barrier.

Shock-Augmented Ignition Approach to Laser Inertial Fusion.

Shock ignition enables high gain at low implosion velocity, reducing ablative Rayleigh-Taylor instability growth, which can degrade conventional direct drive. With this method, driving a strong shock requires high laser power and intensity, resulting in inefficiencies in the drive and the generation of hot electrons that can preheat the fuel. A new "shock-augmented ignition" pulse shape is described that, by preconditioning the ablation plasma before launching a strong shock, enables the shock ignition of thermonuclear fuel, but importantly, with substantially reduced laser power and intensity requirements. The reduced intensity requirement with respect to shock ignition limits laser-plasma instabilities, such as stimulated Raman and Brillouin scatter, reducing the risk of hot-electron preheat and restoring the laser coupling advantages of conventional direct drive. Simulations indicate that, due to the reduced power requirements, high gain (∼100) ignition of large-scale direct drive implosions (outer radius ∼1750 µm, deuterium-tritium ice thickness ∼165 µm) may be possible within the power and energy limits of existing facilities such as the National Ignition Facility. Moreover, this concept extends to indirect drive implosions, which exhibit substantial yield increases at reduced implosion velocity. Shock-augmented ignition expands the viable design space of laser inertial fusion.

Shock Ignition Laser-Plasma Interactions in Ignition-Scale Plasmas.

We use a subignition scale laser, the 30 kJ Omega, and a novel shallow-cone target to study laser-plasma interactions at the ablation-plasma density scale lengths and laser intensities anticipated for direct drive shock-ignition implosions at National Ignition Facility scale. Our results show that, under these conditions, the dominant instability is convective stimulated Raman scatter with experimental evidence of two plasmon decay (TPD) only when the density scale length is reduced. Particle-in-cell simulations indicate this is due to TPD being shifted to lower densities, removing the experimental back-scatter signature and reducing the hot-electron temperature. The experimental laser energy-coupling to hot electrons was found to be 1%-2.5%, with electron temperatures between 35 and 45 keV. Radiation-hydrodynamics simulations employing these hot-electron characteristics indicate that they should not preheat the fuel in MJ-scale shock ignition experiments.

Preparations for a European R&D roadmap for an inertial fusion demo reactor.

A European consortium of 15 laboratories across nine nations have worked together under the EUROFusion Enabling Research grants for the past decade with three principle objectives. These are: (a) investigating obstacles to ignition on megaJoule-class laser facilities; (b) investigating novel alternative approaches to ignition, including basic studies for fast ignition (both electron and ion-driven), auxiliary heating, shock ignition, etc.; and (c) developing technologies that will be required in the future for a fusion reactor. A brief overview of these activities, presented here, along with new calculations relates the concept of auxiliary heating of inertial fusion targets, and provides possible future directions of research and development for the updated European Roadmap that is due at the end of 2020. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 2)'.

Orbital Angular Momentum Coupling in Elastic Photon-Photon Scattering.

In this Letter, we investigate the effect of orbital angular momentum (OAM) on elastic photon-photon scattering in a vacuum for the first time. We define exact solutions to the vacuum electromagnetic wave equation which carry OAM. Using those, the expected coupling between three initial waves is derived in the framework of an effective field theory based on the Euler-Heisenberg Lagrangian and shows that OAM adds a signature to the generated photons thereby greatly improving the signal-to-noise ratio. This forms the basis for a proposed high-power laser experiment utilizing quantum optics techniques to filter the generated photons based on their OAM state.

Experimental Evidence of Backward Raman Scattering Driven Cooperatively by Two Picosecond Laser Pulses Propagating Side by Side.

This Letter investigates experimentally the backward stimulated Raman scattering (SRS) of two copropagating, 1-µm wavelength, 1.5-ps duration laser pulses focused side by side, but not simultaneously, in a preformed underdense plasma. When the two lasers do not interact, one of the pulses (so-called strong) yields a large SRS reflectivity, while the other weak pulse is essentially ineffective as regards SRS. By contrast, the weak pulse shows significant SRS activity if it is launched in the plasma slightly after the strong one, and for time delays as large as about 15 ps. For crossed polarizations and a lateral distance of 80-90 µm, the time delay has to be larger than 3-4 ps for the weak pulse to be active, while it has just to be positive when the polarizations are parallel. The experimental results are discussed with the help of large-scale particle-in-cell simulations.

Spatial and Transient Effects during the Amplification of a Picosecond Pulse Beam by a Nanosecond Pump.

Amplification of a picosecond pulse beam by a lower intensity nanosecond pulse beam was experimentally observed in a flowing plasma. Modifications of intensity distributions in beam focal spots due to nonhomogeneous energy transfer and its transient regime were investigated. The mean transferred power reached 57% of the incident power of the nanosecond pulse beam. An imaging diagnostic allowed the intensity profile of the picosecond pulse beam to be determined, bringing to evidence the spatial nonuniformity of energy transfer in the amplified beam. This diagnostic also enabled us to observe the temporal evolution of the speckle intensity distribution because of the transfer. These results are reproduced by numerical simulations of two complementary codes. The method and the observed effects are important for the understanding of experiments with multiple crossing laser beams in plasmas.

An angular-resolved scattered-light diagnostic for laser-plasma instability studies.

We developed an angular-resolved scattered-light diagnostic station (ARSDS) to extend the study of laser-plasma instabilities (LPIs) by simultaneously diagnosing their features at different angles in a single shot. The ARSDS angularly samples the scattered light using an array of fibers with flexible setups. The collected light is detected with an imaging spectrometer, a streaked spectrometer, or a fiber-optic spectrometer to provide time-integrated/time-resolved spectral information. The ARSDS was implemented at Shenguang-II Upgrade laser facility for the double-cone ignition campaigns. Preliminary results confirm the importance of an angular-resolved detection due to the angular dependence of LPI processes, such as stimulated Raman scattering.

Development of an x-ray radiography platform to study laser-direct-drive energy coupling at the National Ignition Facility.

A platform has been developed to study laser-direct-drive energy coupling at the National Ignition Facility (NIF) using a plastic sphere target irradiated in a polar-direct-drive geometry to launch a spherically converging shock wave. To diagnose this system evolution, eight NIF laser beams are directed onto a curved Cu foil to generate Heα line emission at a photon energy of 8.4 keV. These x rays are collected by a 100-ps gated x-ray imager in the opposing port to produce temporally gated radiographs. The platform is capable of acquiring images during and after the laser drive launches the shock wave. A backlighter profile is fit to the radiographs, and the resulting transmission images are Abel inverted to infer radial density profiles of the shock front and to track its temporal evolution. The measurements provide experimental shock trajectories and radial density profiles that are compared to 2D radiation-hydrodynamic simulations using cross-beam energy transfer and nonlocal heat-transport models.

Single-shot frequency-resolved optical gating for retrieving the pulse shape of high energy picosecond pulses.

Accurate characterization of laser pulses used in experiments is a crucial step to the analysis of their results. In this paper, a novel single-shot frequency-resolved optical gating (FROG) device is described, one that incorporates a dispersive element which allows it to fully characterize pulses up to 25 ps in duration with a 65 fs per pixel temporal resolution. A newly developed phase retrieval routine based on memetic algorithms is implemented and shown to circumvent the stagnation problem that often occurs with traditional FROG analysis programs when they encounter a local minimum.