Orange-Light-Induced Photochemistry Gated by pH and Confined Environments.

We introduce a new photochemically active compound, i.e., pyridinepyrene (PyPy), entailing a pH-active moiety that effects a significant halochromic shift into orange-light (λ = 590 nm) activatable photoreactivity while concomitantly exerting control over its reaction pathways. With blue light (λ = 450 nm) in neutral to basic pH, a [2 + 2] photocycloaddition can be triggered to form a cyclobutene ring in a reversible fashion. If the pH is decreased to acidic conditions, resulting in a halochromic absorption shift, photocycloaddition on the small-molecule level is blocked due to repulsive interactions and exclusive trans-cis isomerization is observed. Through implementation of PyPy into the confined environment of a single-chain nanoparticle (SCNP) design, one can overcome the repulsive forces and exploit the halochromic shift for orange light (λ = 590 nm)-induced cycloaddition and formation of macromolecular three-dimensional (3D) architectures.

A Self-Catalyzed Visible Light Driven Thiol Ligation.

We introduce a highly efficient ligation system based on a visible light-induced rearrangement affording a thiophenol which rapidly undergoes thiol-Michael additions. Unlike conventional light-triggered thiol-ene/yne systems, which rely on the use of photocaged bases/nucleophiles, (organo)-photo catalysts, or radical photoinitiators, our system provides a light-induced reaction in the absence of any additives. The ligation is self-catalyzed via the pyridine mediated deprotonation of the photochemically generated thiophenol. Subsequently, the thiol-Michael reaction between the thiophenol anion and electron deficient alkynes/alkenes proceeds additive-free. Hereby, the underlying photoinduced rearrangement of o-thiopyrinidylbenzaldehyde (oTPyB) generating the free thiol is described for the first time. We studied the influence of various reactions conditions as well as solvents and substrates. We exemplify our findings in a polymer end group modification and obtained macromolecules with excellent end group fidelity.

Electrochemical Stimulation of Water-Oil Interfaces by Nonionic-Cationic Block Copolymer Systems.

Variable interfacial tension could be desirable for many applications. Beyond classical stimuli like temperature, we introduce an electrochemical approach employing polymers. Hence, aqueous solutions of the nonionic-cationic block copolymer poly(ethylene oxide)114-b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}171 (i.e., PEO114-b-PDPAEMA171 with a quaternized poly(diisopropylaminoethyl methacrylate) block) were investigated by emerging drop measurements and dynamic light scattering, analyzing the PEO114-b-qPDPAEMA171 impact on the interfacial tension between water and n-decane and its micellar formation in the aqueous bulk phase. Potassium hexacyanoferrates (HCFs) were used as electroactive complexants for the charged block, which convert the bishydrophilic copolymer into amphiphilic species. Interestingly, ferricyanides ([Fe(CN)6]3-) act as stronger complexants than ferrocyanides ([Fe(CN)6]4-), leading to an insoluble qPDPAEMA block in the presence of ferricyanides. Hence, bulk micellization was demonstrated by light scattering. Due to their addressability, in situ redox experiments were performed to trace the interfacial tension under electrochemical control, directly utilizing a drop shape analyzer. Here, the open-circuit potential (OCP) was changed by electrolysis to vary the ratio between ferricyanides and ferrocyanides in the aqueous solution. While a chemical oxidation/reduction is feasible, also an electrochemical oxidation leads to a significant change in the interfacial tension properties. In contrast, a corresponding electrochemical reduction showed only a slight response after converting ferricyanides to ferrocyanides. Atomic force microscopy (AFM) images of the liquid/liquid interface transferred to a solid substrate showed particles that are in accordance with the diameter from light scattering experiments of the bulk phase. In conclusion, the present results could be an important step toward economic switching of interfaces suitable, e.g., for emulsion breakage.

Reversible Diels-Alder and Michael Addition Reactions Enable the Facile Postsynthetic Modification of Metal-Organic Frameworks.

Functionalization of metal-organic frameworks (MOFs) is critical in exploring their structural and chemical diversity for numerous potential applications. Herein, we report multiple approaches for the tandem postsynthetic modification (PSM) of various MOFs derived from Zr(IV), Al(III), and Zn(II). Our current work is based on our efforts to develop a wide range of MOF platforms with a dynamic functional nature that can be chemically switched via thermally triggered reversible Diels-Alder (DA) and hetero-Diels-Alder (HDA) ligations. Furan-tagged MOFs (furan-UiO-66-Zr) were conjugated with maleimide groups bearing dienophiles to prepare MOFs with a chemically switchable nature. As HDA pairs, phosphoryl dithioester-based moieties and cyclopentadiene (Cp)-grafted MOF (Cp-MIL-53-Al) were utilized to demonstrate the cleavage and rebonding of the linkages as a function of temperature. In addition to these strategies, the Michael addition reaction was also applied for the tandem PSM of IRMOF-3-Zn. Maleimide groups were postsynthetically introduced in the MOF lattice, which were further ligated with cysteine-based biomolecules via the thiol-maleimide Michael addition reaction. On the basis of the versatility of the herein presented chemistry, we expect that these approaches will help in designing a variety of sophisticated functional MOF materials addressing diverse applications.

Light-induced Ligation of o-Quinodimethanes with Gated Fluorescence Self-reporting.

We introduce a highly efficient photoligation system, affording a pro-fluorescent Diels-Alder product that, on demand, converts into an intensively fluorescent naphthalene via E1 elimination in the presence of catalytic amounts of acid. The Diels-Alder reaction of the photocaged diene (o-quinodimethane ether or thioether) with electron-deficient alkynes is induced by UV or visible light. In contrast to previously reported ligation techniques directly leading to fluorescent products, the fluorescence is turned on after the photoligation. Thus, the light absorption of the fluorophore does not undermine the photoligation via competitive absorption, and as a result, photobleaching or side reactions of the fluorophore are not observed. Critically, the gated generation of a fluorescent product allows for fluorometric determination of the conversion. We employ a simple synthesis strategy for heterobifunctional electron-deficient alkynes allowing for facile functionalization of payload molecules.

Engineering Nitroxide Functional Surfaces Using Bioinspired Adhesion.

We pioneer a versatile surface modification strategy based on mussel-inspired oxidative catecholamine polymerization for the design of nitroxide-containing thin polymer films. A 3,4-dihydroxy-l-phenylalanine (l-DOPA) monomer equipped with a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-derived oxidation-labile hydroxylamine functional group is employed as a universal coating agent to generate polymer scaffolds with persistent radical character. Various types of materials including silicon, titanium, ceramic alumina, and inert poly(tetrafluoroethylene) (PTFE) were successfully coated with poly(DOPA-TEMPO) thin films in a one-step dip-coating procedure under aerobic, slightly alkaline (pH 8.5) conditions. Steadily growing polymer films (∼1.1 nm h-1) were monitored by ellipsometry, and their thicknesses were critically compared with those obtained from atomic force microscopic cross-sectional profiles. The heterogeneous composition of surface-adherent nitroxide scaffolds examined by X-ray photoelectron spectroscopy was correlated to that examined by in-solution polymer analysis via high-resolution electrospray ionization mass spectrometry, revealing oligomeric structures with up to six repeating units, mainly composed of covalently linked dihydroxyindole along the polymer backbone. Critically, the reversible redox-active character of the nitroxide-containing polymer scaffolds was investigated by cyclic voltammetric measurements, revealing a convenient and facile access route to electrochemically active nitroxide polymer coatings with potential application in electronic devices such as organic radical batteries.

Wavelength-Gated Dynamic Covalent Chemistry.

Chemical reactions are classically controlled by the judicious choice of functional groups as well as external factors such as temperature and catalysts. However, the use of light-induced reactions not only offers precise temporal and spatial control, but critically allows highly specific reaction channels to be selectively addressed through wavelength and intensity, thereby enabling targeted covalent bonds to be made and broken. Photoreversible cycloadditions are the most promising candidates to seize the outlined potential upon selective cyclization and cycloreversion, but are today still far from fulfilling these expectations. The current Minireview critically explores the current challenges in the application of photoreversible cycloadditions and discusses the steps necessary to realize their potential in molecular biology, biomimetic systems, 3D laser lithographic processes, and advanced soft matter materials with reprogrammable and self-healing properties.

Ultrathin Monomolecular Films and Robust Assemblies Based on Cyclic Catechols.

We introduce a newly designed catechol-based compound and its application for the preparation of homogeneous monomolecular layers as well as for robust assemblies on various substrates. The precisely defined cyclic catechol material (CyCat) was prepared from ortho-dimethoxybenzene in a phenolic resin-like synthesis and subsequent deprotection, featuring molecules with up to 32 catechol units. The CyCat's chemical structure was carefully assessed via matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF), proton nuclear magnetic resonance (1H NMR), diffusion ordered spectroscopy (2D DOSY) and high resolution electrospray ionization mass spectrometry (ESI MS) experiments. The formation of colloidal aggregates of the CyCat material in alkaline solution was followed by dynamic light scattering (DLS) and further verified by dropcasting CyCat from solution on highly oriented pyrolytic graphite (HOPG), which was examined by Kelvin probe force microscopy (KPFM). The adsorption behavior of the CyCat to form monomolecular layers was investigated in real time by surface plasmon resonance (SPR). Formation of these thin CyCat layers (1.6-2.1 nm) on Au, SiO2 and TiO2 substrates was corroborated by spectroscopic ellipsometry (SE) and X-ray photoelectron spectroscopy (XPS). The prepared coating perfectly reflects the surface structure of the underlying substrate and does not exhibit CyCat colloidal aggregates as verified by atomic force microscopy (AFM). The functional nature of the prepared catechol monolayers was evidenced by reaction with 4-bromophenethylamine and bis(3-aminopropyl)-terminated poly(ethylene oxide) (PEO). Multilayer assemblies were prepared by a simple procedure of iterative immersion in solutions of CyCat and a multifunctional amine on Au, SiO2 and TiO2 substrates forming thicker coatings (up to 12 nm). Postmodification with small organic molecules was performed to covalently attach trifluoroacetyl, tetrazole and 2-bromo-2-methylpropanoyl moieties to the amine groups of the multilayer assembly coating. Furthermore, the versatility of the novel multilayer coating was underpinned by "grafting-to" of phenacyl sulfide-terminated PEO and "grafting-from" of poly(methyl methacrylate) via surface-initiated atom transfer radical polymerization (ATRP).

Two-in-One: λ-Orthogonal Photochemistry on a Radical Photoinitiating System.

An alkyne functional radical photoinitiator, 2-(4-(2-hydroxy-2-methylpropanoyl)phenoxy)ethyl hex-5-ynoate, and evidence that both reactive moieties - the alkyne and the photoinitiator terminus - can be independently addressed with light of disparate wavelength (λ-orthogonality) are introduced. The alkyne functionality is subjected to a visible light (420 nm) induced copper-catalyzed Huisgen reaction, which is employed for the selective functionalization of the initiator with a poly(ethylene glycol) (PEG) chain. This reaction proceeds completely λ-orthogonal in the presence of the UV-reactive photoinitiating moiety. Conversely, it is demonstrated that the alkyne functionality of the photoinitiator is quantitatively orthogonal to UV irradiation emitted by the pulsing action of an excimer laser (351 nm, pulsed-laser polymerization, PLP) and the generated radical species. In turn, the PEGylated initiator can readily be employed as a macrophotoinitiator during PLP. The introduced λ-orthogonally addressable dual functional initiator can be used in a wide range of applications, including surface lithography and post-synthetic modification of photocured materials.

Just Add Salt: A Mass Spectrometric Analysis Method for Imaging Anion-Exchanged Poly(Ionic Liquid)s.

We report the first mass spectrometric analysis of poly(ionic liquid)s (PILs) containing weakly coordinating anions introduced by a fast, simple, and quantitative postmodification method on the example of the hydrophilic, well-defined poly(vinylbenzylpyridinium chloride) p([VBPy]Cl) species, analyzed with an in-source collision induced dissociation-Orbitrap mass spectrometry (MS) protocol. Using the MS approach allows for the precise structural elucidation of ion-exchanged p([VBPy]Cl) utilizing AgX (X = NO3- , CF3 CO2- , BF4- ) salts. The anion exchange is shown to be quantitative - without observing residual chlorinated PIL - on rapid time scales, using only filtration as a standard procedure during sample preparation. In addition, the influence of weakly coordinating anions on the ionization behavior of PILs is studied in detail.

Efficient Photochemical Approaches for Spatially Resolved Surface Functionalization.

Materials interfaces--with a gas, a liquid, or another solid--are highly important for advanced applications. Besides their topological design, controlling interactions at these interfaces is typically realized by tuning the chemical composition of the materials surface. In areas such as nanoscience or biology, it is, however, highly desirable to impart heterogeneously distributed properties. Photopatterning, more than micro- and nanoprinting methods, is often the method of choice for precise functionalization, especially in terms of versatility. Recently, a range of new or rediscovered photochemistry approaches have been applied to precision surface functionalization, with the common aim of increasing efficiency and resolution while concomitantly lowering the amount of required energy. A survey of such methods is presented in this Review, with a focus on those we have explored.

Hierarchical Nacre Mimetics with Synergistic Mechanical Properties by Control of Molecular Interactions in Self-Healing Polymers.

Designing the reversible interactions of biopolymers remains a grand challenge for an integral mimicry of mechanically superior biological composites. Yet, they are the key to synergistic combinations of stiffness and toughness by providing sacrificial bonds with hidden length scales. To address this challenge, dynamic polymers were designed with low glass-transition temperature T(g) and bonded by quadruple hydrogen-bonding motifs, and subsequently assembled with high-aspect-ratio synthetic nanoclays to generate nacre-mimetic films. The high dynamics and self-healing of the polymers render transparent films with a near-perfectly aligned structure. Varying the polymer composition allows molecular control over the mechanical properties up to very stiff and very strong films (E≈45 GPa, σ(UTS)≈270 MPa). Stable crack propagation and multiple toughening mechanisms occur in situations of balanced dynamics, enabling synergistic combinations of stiffness and toughness. Excellent gas barrier properties complement the multifunctional property profile.

Ambient temperature ligation of diene functional polymer and peptide strands onto cellulose via photochemical and thermal protocols.

In the present contribution, two novel ambient temperature avenues are introduced to functionalize solid cellulose substrates in a modular fashion with synthetic polymer strands (poly(trifluoro ethyl methacrylate), PTFEMA, Mn = 4400 g mol(-1) , D = 1.18) and an Arg-Gly-Asp (RGD) containing peptide sequence. Both protocols rely on a hetero Diels-Alder reaction between an activated thiocarbonyl functionality and a diene species. In the first-thermally activated-protocol, the cellulose features surface-expressed thiocarbonylthio compounds, which readily react with diene terminal macromolecules at ambient temperature. In the second protocol, the reactive ene species are photochemically generated based on a phenacyl sulfide-decorated cellulose surface, which upon irradiation expresses highly reactive thioaldehyde species. The generated functional hybrid surfaces are characterized in-depth via ToF-SIMS and XPS analysis, revealing the successful covalent attachment of the grafted materials, including the spatially resolved patterning of both synthetic polymers and peptide strands using the photochemical protocol. The study thus provides a versatile platform technology for solid cellulose substrate modification via efficient thermal and photochemical ligation strategies.

Grafting efficiency of synthetic polymers onto biomaterials: a comparative study of grafting-from versus grafting-to.

In the present study, the two grafting techniques grafting-from - by activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) - and grafting-to - by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) - were systematically compared, employing cellulose as a substrate. In order to obtain a meaningful comparison, it is crucial that the graft lengths of the polymers that are grafted from and to the substrates are essentially identical. Herein, this was achieved by utilizing the free polymer formed in parallel to the grafting-from reaction as the polymer for the grafting-to reaction. Four graft lengths were investigated, and the molar masses of the four free polymers (21 ≤ M(n) ≤ 100 kDa; 1.07 ≤ D(M) ≤ 1.26), i.e. the polymers subsequently employed in the grafting-to reaction, were shown to be in the same range as the molar masses of the polymers grafted from the surface (23 ≤ M(n) ≤ 87 kDa; 1.08 ≤ D(M) ≤ 1.31). The molecular weights of the chains grafted from the surface were established after cleavage from the cellulose substrates via size exclusion chromatography (SEC). High-resolution Fourier transform infrared microscopy (FT-IRM) was employed as an efficient tool to study the spatial distribution of the polymer content on the grafted substrates. In addition, the functionalized substrates were analyzed by X-ray photoelectron spectroscopy (XPS), contact angle (CA) measurements, and field-emission scanning electron microscopy (FE-SEM). For cellulose substrates modified via the grafting-from approach, the content of polymer on the surfaces increased with increasing graft length, confirming the possibility to tailor not only the length of the polymer grafts but also the polymeric content on the surface. In comparison, for the grafting-to reaction, the grafted content could not be controlled by varying the length of the preformed polymer: the polymer content was essentially the same for the four graft lengths. Consequently, the obtained results, when employing cellulose as a substrate and under these conditions, suggest that the grafting-from approach is superior to the grafting-to technique with respect to controlling the distribution of the polymeric content on the surface.

Spatially controlled photochemical peptide and polymer conjugation on biosurfaces.

An efficient phototriggered Diels-Alder conjugation is utilized to graft in an effective and straightforward approach poly(trifluoro ethyl methacrylate) (Mn = 3700 Da, D = 1.27) and a model peptide (GIGKFLHS) onto thin hyaluronan films and cellulose surfaces. The surfaces were functionalized with an o-quinodimethane moiety - capable of releasing a caged diene - via carbodiimide mediated coupling. The o-quinodimethane group is employed as a photoactive linker to tether predefined peptide/polymer strands in a spatially controlled manner onto the biosurface by photoenol ligation. An in-depth characterization employing XPS, ToF-SIMS, SPR, ellipsometry, and AFM was conducted to evidence the effectiveness of the presented approach.

Post-functionalization of polymers via orthogonal ligation chemistry.

The establishment of advanced living/controlled polymerization protocols allows for engineering synthetic polymers in a precise fashion. Combining advanced living/controlled polymerization techniques with highly efficient coupling chemistries facilitates quantitative, modular, and orthogonal functionalization of synthetic polymer strands at their chain termini as well as side-chain functionalization. The review highlights the current status of selected post-functionalization techniques of polymers via orthogonal ligation chemistries, major characteristics of the specific transformation chemistry, as well as the characterization of the products.

Biomimetic dopamine-diels-alder switches.

Mussel adhesives function as tools for surface modifications of a wide variety of materials due to their remarkable adhesion properties. Herein, a combination of bioinspired mussel adhesives based on a dopamine derivative, polymer chemistry, and well-established Diels-Alder (DA) chemistry leads to a bioinspired switchable surface system that possesses the capability of attaching and detaching specific polymers on demand. A dopaminemaleimide compound, which has been attached to a gold surface under maritime conditions undergoes DA- and retro-DA-click-conjugations with cyclopentadiene-carrying PEG chains. The surface attachment and the subsequent DA/rDA cycles are evidenced via XPS analysis.

Mild and modular surface modification of cellulose via hetero Diels-Alder (HDA) cycloaddition.

A combination of reversible addition-fragmentation chain transfer (RAFT) polymerization and hetero Diels-Alder (HDA) cycloaddition was used to effect, under mild (T ≈ 20 °C), fast, and modular conditions, the grafting of poly(isobornyl acrylate) (M(n) = 9800 g mol(-1), PDI = 1.19) onto a solid cellulose substrate. The active hydroxyl groups expressed on the cellulose fibers were converted to tosylate leaving groups, which were subsequently substituted by a highly reactive cyclopentadienyl functionality (Cp). By employing the reactive Cp-functionality as a diene, thiocarbonyl thio-capped poly(isobornyl acrylate) synthesized via RAFT polymerization (mediated by benzyl pyridine-2-yldithioformiate (BPDF)) was attached to the surface under ambient conditions by an HDA cycloaddition (reaction time: 15 h). The surface-modified cellulose samples were analyzed in-depth by X-ray photoelectron spectroscopy, scanning electron microscopy, elemental analysis, Fourier transform infrared (FT-IR) spectroscopy as well as Fourier transform infrared microscopy employing a focal plane array detector for imaging purposes. The analytical results provide strong evidence that the reaction of suitable dienophiles with Cp-functional cellulose proceeds under mild reaction conditions (T ≈ 20 °C) in an efficient fashion. In particular, the visualization of individual modified cellulose fibers via high-resolution FT-IR microscopy corroborates the homogeneous distribution of the polymer film on the cellulose fibers.

Wavelength-Selective Softening of Hydrogel Networks.

Photoresponsive hydrogels hold key potential in advanced biomedical applications including tissue engineering, regenerative medicine, and drug delivery, as well as intricately engineered functions such as biosensing, soft robotics, and bioelectronics. Herein, the wavelength-dependent degradation of bio-orthogonal poly(ethylene glycol) hydrogels is reported, using three selective activation levels. Specifically, three chromophores are exploited, that is, ortho-nitrobenzene, dimethyl aminobenzene, and bimane, each absorbing light at different wavelengths. By examining their photochemical action plots, the wavelength-dependent reactivity of the photocleavable moieties is determined. The wavelength-selective addressability of individual photoreactive units is subsequently translated into hydrogel design, enabling wavelength-dependent cleavage of the hydrogel networks on-demand. Critically, this platform technology allows for the fabrication of various hydrogels, whose mechanical properties can be fine-tuned using different colors of light to reach a predefined value, according to the chromophore ratios used. The softening is shown to influence the spreading of pre-osteoblastic cells adhering to the gels as a demonstration of their potential utility. Furthermore, the materials and photodegradation processes are non-toxic to cells, making this platform attractive for biomaterials engineering.

Biomimetic mussel adhesive inspired clickable anchors applied to the functionalization of fe(3) o(4) nanoparticles.

The functionalization of magnetite (Fe(3) O(4) ) nanoparticles with dopamine-derived clickable biomimetic anchors is reported. Herein, an alkyne-modified catechol-derivative is employed as the anchor, as i) the catechol-functional anchor groups possess irreversible covalent binding affinity to Fe(3) O(4) nanoparticles, and ii) the alkyne terminus enables further functionalization of the nanoparticles by the grafting-onto approach with various possibilities offered by 'click' chemistry. In the present work, azido-end group functionalized Rhodamine and poly(ethylene glycol) (PEG) are utilized to coat the iron oxide nanoparticles to make them fluorescent and water soluble.