RESUMO
In this paper, we present a hybrid semiconductor structure for biosensing applications that features the co-integration of nanoelectromechanical systems with the well-known metal oxide semiconductor technology. The proposed structure features an MOSFET as a readout element, and a doubly clamped beam that is isolated from the substrate by a thin air gap, as well as by a tunnel oxide layer. The beam structure is functionalised by a thin layer of biotargets, and the main aim is to detect a particular set of biomolecules, such as enzymes, bacteria, viruses, and DNA/RNA chains, among others. In here, a three-dimensional finite element analysis is performed in order to study the behaviour of the functionalised, doubly clamped beam. Preliminary results for the fabrication and characterisation processes show good agreement between the simulated and measured characteristics.
Assuntos
DNA , Semicondutores , Óxidos/químicaRESUMO
Anthropogenic activities have increased the amount of urban wastewater discharged into natural aquatic reservoirs containing a high amount of nutrients such as phosphorus (Pi and PO 4 - 3 ), nitrogen (NH 3 and NO 3 - ) and organic contaminants. Most of the urban wastewater in Mexico do not receive any treatment to remove nutrients. Several studies have reported that an alternative to reduce those contaminants is using consortiums of microalgae and endogenous bacteria. In this research, a genome-scale biochemical reaction network is reconstructed for the co-culture between the microalga Chlorella vulgaris and the bacterium Pseudomonas aeruginosa. Metabolic Pathway Analysis (MPA), is applied to understand the metabolic capabilities of the co-culture and to elucidate the best conditions in removing nutrients. Theoretical yields for phosphorus removal under photoheterotrophic conditions are calculated, determining their values as 0.042 mmol of PO 4 - 3 per g DW of C. vulgaris, 19.43 mmol of phosphorus (Pi) per g DW of C. vulgaris and 4.90 mmol of phosphorus (Pi) per g DW of P. aeruginosa. Similarly, according to the genome-scale biochemical reaction network the theoretical yields for nitrogen removal are 10.3 mmol of NH 3 per g DW of P. aeruginosa and 7.19 mmol of NO 3 - per g DW of C. vulgaris. Thus, this research proves the metabolic capacity of these microorganisms in removing nutrients and their theoretical yields are calculated.
Assuntos
Chlorella vulgaris/metabolismo , Redes e Vias Metabólicas , Nitrogênio/metabolismo , Fósforo/metabolismo , Pseudomonas aeruginosa/metabolismo , Técnicas de Cocultura , Águas Residuárias/microbiologia , Purificação da ÁguaRESUMO
In this research removal of NH3-N, NO3-N and PO4-P nutrients from municipal wastewater was studied, using Chlorella vulgaris, Pseudomonas putida, Bacillus cereus and an artificial consortium of them. The objective is to analyze the performance of these microorganisms and their consortium, which has not been previously studied for nutrient removal in municipal wastewater. A model wastewater was prepared simulating the physicochemical characteristics found at the wastewater plant in Chapala, Mexico. Experiments were carried out without adding an external carbon source. Results indicate that nutrient removal with Chlorella vulgaris was the most efficient with a removal of 24.03% of NO3-N, 80.62% of NH3-N and 4.30% of PO4-P. With Bacillus cereus the results were 8.40% of NO3-N, 28.80% of NH3-N and 3.80% of PO4-P. The removals with Pseudomonas putida were 2.50% of NO3-N, 41.80 of NH3-N and 4.30% of PO4-P. The consortium of Chlorella vulgaris-Bacillus cereus-Pseudomonas putida removed 29.40% of NO3-N, 4.2% of NH3-N and 8.4% of PO4-P. The highest biomass production was with Bacillus cereus (450 mg/l) followed by Pseudomonas putida (444 mg/l), the consortium (205 mg/l) and Chlorella vulgaris (88.9 mg/l). This study highlights the utility of these microorganisms for nutrient removal in wastewater treatments.
Assuntos
Amônia/metabolismo , Bacillus cereus/metabolismo , Chlorella vulgaris/metabolismo , Nitratos/metabolismo , Fosfatos/metabolismo , Pseudomonas putida/metabolismo , Águas Residuárias/microbiologia , Purificação da Água/métodos , Biodegradação Ambiental , Biomassa , México , Águas Residuárias/química , Poluentes Químicos da Água , Purificação da Água/instrumentaçãoRESUMO
Nitrile gloves have become a significant environmental pollutant after the COVID-19 pandemic due to their single-use design. This study examines the capability of P. aeruginosa to use nitrile gloves as its sole carbon energy source. Biodegradation was determined by P. aeruginosa adapting to increasing nitrile glove concentrations at 1%, 3%, and 5% (w/v). The growth kinetics of P. aeruginosa were evaluated, as well as the polymer weight loss. Topographic changes on the glove surfaces were examined using SEM, and FT-IR was used to evaluate the biodegradation products of the nitrile gloves. Following the establishment of a biofilm on the glove surface, the nitrile toxicity was minimized via biodegradation. The result of the average weight loss of nitrile gloves was 2.25%. FT-IR analysis revealed the presence of aldehydes and aliphatic amines associated with biodegradation. SEM showed P. aeruginosa immersed in the EPS matrix, causing the formation of cracks, scales, protrusions, and the presence of semi-spherical particles. We conclude that P. aeruginosa has the capability to use nitrile gloves as its sole carbon source, even up to 5%, through biofilm formation, demonstrating the potential of P. aeruginosa for the degradation of nitrile gloves.
RESUMO
Parkinson's disease (PD) is a neurodegenerative disorder characterized by alterations in motor capacity resulting from a decrease in the neurotransmitter dopamine due to the selective death of dopaminergic neurons of the nigrostriatal pathway. Unfortunately, conventional pharmacological treatments fail to halt disease progression; therefore, new therapeutic strategies are needed, and currently, some are being investigated. The endocannabinoid system (ECS), highly expressed in the basal ganglia (BG) circuit, undergoes alterations in response to dopaminergic depletion, potentially contributing to motor symptoms and the etiopathogenesis of PD. Substantial evidence supports the neuroprotective role of the ECS through various mechanisms, including anti-inflammatory, antioxidative, and antiapoptotic effects. Therefore, the ECS emerges as a promising target for PD treatment. This review provides a comprehensive summary of current clinical and preclinical evidence concerning ECS alterations in PD, along with potential pharmacological targets that may exert the protection of dopaminergic neurons.
RESUMO
The formation of microparticles (MPs) of biocompatible and biodegradable hydrogels such as polyethylene glycol diacrylate (PEGDA) utilizing microfluidic devices is an attractive option for entrapment and encapsulation of active principles and microorganisms. Our research group has presented in previous studies a formulation to produce these hydrogels with adequate physical and mechanical characteristics for their use in the formation of MPs. In this work, hydrogel MPs are formed based on PEGDA using a microfluidic device with a T-junction design, and the MPs become hydrogel through a system of photopolymerization. The diameters of the MPs are evaluated as a function of the hydrodynamic condition flow rates of the continuous (Qc) and disperse (Qd) phases, measured by optical microscopy, and characterized through scanning electron microscopy. As a result, the following behavior is found: the diameter is inversely proportional to the increase in flow in the continuous phase (Qc), and it has a significant statistical effect that is greater than that in the flow of the disperse phase (Qd). While the diameter of the MPs is proportional to Qd, it does not have a significant statistical effect on the intervals of flow studied. Additionally, the MPs' polydispersity index (PDI) was measured for each experimental hydrodynamic condition, and all values were smaller than 0.05, indicating high homogeneity in the MPs. The microparticles have the potential to entrap pharmaceuticals and microorganisms, with possible pharmacological and bioremediation applications.
RESUMO
INTRODUCTION: Parkinson's disease represents a neurodegenerative condition characterized by the progressive loss of dopaminergic neurons within the Substantia Nigra pars compacta (SNpc), resulting in diminished dopamine levels in the striatum (STR) and chronic neuroinflammation. Recent investigations have proposed the neuroprotective potential of the endocannabinoid system in neurodegenerative disorders. ß-caryophyllene (BCP) is recognized for its antioxidant and anti-inflammatory properties, attributed to its activation of the type 2 cannabinoid receptor. This study aimed to assess the neuroprotective impact of BCP on dopaminergic neurons, with a particular focus on inhibiting the NLRP3 inflammasome. METHODS: A model of hemiparkinsonism, induced by 6-hydroxydopamine (6-OHDA), served as the experimental framework. Motor function was evaluated using the cylinder test, and inflammasome inhibition was determined by assessing the expression of NLRP3, caspase-1, and the pro-inflammatory cytokine IL-1ß in both the SNpc and STR through ELISA analysis. Furthermore, the evaluation of oxidative stress was facilitated by quantifying malondialdehyde (MDA) levels in the same regions. RESULTS: BCP treatment demonstrated significant improvements in motor dysfunction, as assessed by the cylinder test (p=0.0011) and exhibited a neuroprotective effect on dopaminergic neurons within the SNpc (p=0.0017), as well as nerve fibers in the STR (p=0.0399). In terms of its ability to inhibit the inflammasome, BCP led to decreased expression levels of NLRP3 (p=0.0401 in STR and p = 0.0139 in SNpc), caspase-1 (p=0.0004 in STR), and MDA (p=0.0085 in STR and p=0.0414 in SNpc). CONCLUSION: These results point to BCP's potential in mitigating the motor deficit, inhibiting NLRP3 inflammasome activation, and attenuating lipid peroxidation induced by 6-OHDA.
Assuntos
Doenças Neuroinflamatórias , Fármacos Neuroprotetores , Humanos , Caspases/metabolismo , Caspases/farmacologia , Modelos Animais de Doenças , Neurônios Dopaminérgicos/metabolismo , Inflamassomos/metabolismo , Camundongos Endogâmicos C57BL , Doenças Neuroinflamatórias/tratamento farmacológico , Doenças Neuroinflamatórias/metabolismo , Neuroproteção , Fármacos Neuroprotetores/farmacologia , Proteína 3 que Contém Domínio de Pirina da Família NLR , Oxidopamina , Doença de Parkinson/tratamento farmacológico , Doença de Parkinson/metabolismo , Camundongos , AnimaisRESUMO
Photopolymerized microparticles are made of biocompatible hydrogels like Polyethylene Glycol Diacrylate (PEGDA) by using microfluidic devices are a good option for encapsulation, transport and retention of biological or toxic agents. Due to the different applications of these microparticles, it is important to investigate the formulation and the mechanical properties of the material of which they are made of. Therefore, in the present study, mechanical tests were carried out to determine the swelling, drying, soluble fraction, compression, cross-linking density (Mc) and mesh size (ξ) properties of different hydrogel formulations. Tests provided sufficient data to select the best formulation for the future generation of microparticles using microfluidic devices. The initial gelation times of the hydrogels formulations were estimated for their use in the photopolymerization process inside a microfluidic device. Obtained results showed a close relationship between the amount of PEGDA used in the hydrogel and its mechanical properties as well as its initial gelation time. Consequently, it is of considerable importance to know the mechanical properties of the hydrogels made in this research for their proper manipulation and application. On the other hand, the initial gelation time is crucial in photopolymerizable hydrogels and their use in continuous systems such as microfluidic devices.
RESUMO
A stoichiometric model for Saccharomyces cerevisiae is reconstructed to analyze the continuous fermentation process of agave juice in Tequila production. The metabolic model contains 94 metabolites and 117 biochemical reactions. From the above set of reactions, 93 of them are linked to internal biochemical reactions and 24 are related to transport fluxes between the medium and the cell. The central metabolism of S. cerevisiae includes the synthesis for 20 amino-acids, carbohydrates, lipids, DNA and RNA. Using flux balance analysis (FBA), different physiological states of S. cerevisiae are shown during the fermentative process; these states are compared with experimental data under different dilution rates (0.04-0.12 h$ ^{-1} $). Moreover, the model performs anabolic and catabolic biochemical reactions for the production of higher alcohols. The importance of the Saccharomyces cerevisiae genomic model in the area of alcoholic beverage fermentation is due to the fact that it allows to estimate the metabolic fluxes during the beverage fermentation process and a physiology state of the microorganism.
Assuntos
Agave , Saccharomyces cerevisiae , Bebidas Alcoólicas/análise , Etanol , FermentaçãoRESUMO
The capability of Halobacterium sp. NRC-1 to synthesize carboxyl ester hydrolases was investigated, and the effect of physicochemical conditions on the growth rate and production of esterases was evaluated. The haloarchaeon synthesized a carboxyl ester hydrolase, confirming the genomic prediction. This enzymatic activity was intracellularly produced as a growth-associated metabolite. Esterase activity was assayed using different p-nitrophenyl-esters and triacyl-glycerides, which showed a preference for hydrolyzing tributyrin. The archaeal growth rate and esterase production were significantly influenced by the pH and the NaCl concentration. An interaction effect between temperature and NaCl was also seen. The maximal growth rate and esterase production found for Halobacterium sp. NRC-1 were 0.136 h(-1) (at 4.2 M NaCl, pH 6 and 44 degrees C) and 1.64 U/l (at 4.6 M NaCl, pH 6 and 30 degrees C), respectively. Furthermore, the effects of NaCl concentration, pH and temperature on enzyme activity were studied. Two maximal esterase activities were elucidated from the intracellular crude extract when it was incubated at different NaCl concentrations (1 M and 5 M) and at different pHs (6 and 7.5). This is the first report that shows experimentally the synthesis of carboxyl ester hydrolases by Halobacterium sp. NRC-1. This enzyme was found to be extremely halophilic (5 M NaCl) and thermophilic (80 degrees C), making it very interesting for future investigations in non-aqueous biocatalysis.
Assuntos
Proteínas Arqueais/biossíntese , Carboxilesterase/biossíntese , Halobacterium/enzimologia , Halobacterium/crescimento & desenvolvimento , Temperatura Alta , Concentração de Íons de Hidrogênio , Salinidade , Cloreto de Sódio/farmacologiaRESUMO
The present study was conducted to investigate the capability of Haloarcula marismortui to synthesize esterases and lipases, and the effect of physicochemical conditions on the growth and the production of esterases and lipases. Finally, the effect of NaCl concentration and temperature on esterase and lipase activities was studied using intracellular crude extracts. In order to confirm the genomic prediction about the esterase and lipase synthesis, H. marismortui was cultured on a rich medium and the crude extracts (intra- or extracellular) obtained were assayed for both activities using p-nitrophenyl esters and triacylglycerides as substrates. Studies on the kinetics of growth and production of esterase and lipase of H. marismortui were performed, reaching a maximum growth rate of 0.053 h(-1) and maximal productions of intracellular esterase and lipase of 2.094 and 0.722 U l(-1) using p-nitrophenyl valerate and p-nitrophenyl laurate, respectively. Both enzymes were produced as growth-associated metabolites. The effects of temperature, pH, and NaCl concentration on the growth rate and production of enzymes were studied by using a Box-Behnken response surface design. The three response variables were significantly influenced by the physicochemical factors and an interaction effect between temperature and NaCl concentration was also evidenced. The surface response method estimated the following maximal values for growth rate and productions of esterase and lipase: 0.086 h(-1) (at 42.5 degrees C, pH 7.4, and 3.6 mol l(-1) NaCl), 2.3 U l(-1) (at 50 degrees C, pH 7.5, and 4.3 mol l(-1) NaCl), and 0.58 U l(-1) (at 50 degrees C, pH 7.6, and 4.5 mol l(-1) NaCl), respectively. Esterases were active at different salt concentrations, showing two optimal activities (at 0.5 and 5 mol l(-1) NaCl), which suggested the presence of two different esterases. Interestingly, in the absence of salt, esterase retained 50% residual activity. Esterases and lipase activities were maximal at 45 degrees C and inactive at 75 degrees C. This study represents the first report evidencing the synthesis of esterase and lipase by H. marismortui.
Assuntos
Reatores Biológicos , Esterases/biossíntese , Haloarcula marismortui/enzimologia , Lipase/biossíntese , Proteínas Arqueais/biossíntese , Meios de Cultura/química , Haloarcula marismortui/crescimento & desenvolvimento , Concentração de Íons de Hidrogênio , Lauratos/metabolismo , Nitrobenzenos/metabolismo , Temperatura , Valeratos/metabolismoRESUMO
Hydrogels are materials specially suited for encapsulation of biological elements. Their large water content provides an environment compatible with most biological molecules. Their crosslinked nature also provides an ideal material for the protection of encapsulated biological elements against degradation and/or immune recognition. This makes them attractive not only for controlled drug delivery of proteins, but they can also be used to encapsulate cells that can have therapeutic applications. Thus, hydrogels can be used to create systems that will deliver required therapies in a controlled manner by either encapsulation of proteins or even cells that produce molecules that will be released from these systems. Here, an overview of hydrogel encapsulation strategies of biological elements ranging from molecules to cells is discussed, with special emphasis on therapeutic applications.
RESUMO
The marine bacterium Saccharophagus degradans was investigated for the synthesis of polyhydroxyalkanoates (PHAs), using glucose as the sole source of carbon in a two-step batch culture. In the first step the microorganism grew under nutrient balanced conditions; in the second step the cells were cultivated under limitation of nitrogen source. The biopolymer accumulated in S. degradans cells was detected by Nile red staining and FT-IR analysis. From GC-MS analysis, it was found that this strain produced a homopolymer of 3-hydroxybutyric acid. The cellular polymer concentration, its molecular mass, glass transition temperature, melting point and heat of fusion were 17.2+/-2.7% of dry cell weight, 54.2+/-0.6 kDa, 37.4+/-6.0 degrees C, 165.6+/-5.5 degrees C and 59.6+/-2.2 J g(-1), respectively. This work is the first report determining the capacity of S. degradans to synthesize PHAs.
Assuntos
Alteromonadaceae/metabolismo , Poli-Hidroxialcanoatos/biossíntese , Poli-Hidroxialcanoatos/química , Polissacarídeos/metabolismo , Alteromonadaceae/química , Varredura Diferencial de Calorimetria , Cromatografia em Gel , Cromatografia Gasosa-Espectrometria de Massas , Peso MolecularRESUMO
The production and characterization of polyhydroxyalkanoic acids (PHAs) from glucose in Pseudomonas aeruginosa ATCC 9027 is described. We determined that the synthesis of PHAs was not due to a complete lack of nitrogen source, as previously reported for other microorganisms. The synthesis of PHAs was observed during exponential growth and it depended on the carbon/nitrogen ratio in the culture. More significantly, the specific PHA accumulation rate in this phase was higher than that observed in the storage phase. This phenomenon was a consequence of higher extracellular production rates of gluconate and 2-ketogluconate detected during the storage phase. Therefore, the production of those acids decreased the synthesis of PHAs in P. aeruginosa. The maximum percentage of PHA accumulation obtained was 10.8% of the cell dry matter when all the glucose was consumed. The monomer composition of this PHA consisted only of saturated 3-hydroxy fatty acids (octanoic, decanoic, and dodecanoic acids) as shown by gas chromatography - mass spectroscopy and nuclear magnetic resonance analyses, where 3-hydroxydecanoic acid was the main component because of the high affinity of its PhaC synthase for this monomer. The physical properties of this PHA were determined by differential scanning calorimetry and gel permeation chromatography.