Preparation and partial characterization of films made with dual-modified (acetylation and crosslinking) potato starch.

BACKGROUND: Starch is an alternative material for the production of biodegradable plastics; however, native starches have drawbacks due to their hydrophilic nature. Chemical modifications such as acetylation and crosslinking are used to broaden the potential end-uses of starch. Dual modification of starches increases their functionality compared to that of starches with similar single modifications. In this study, a dual-modified potato starch (acetylated and crosslinked) was used to produce films by casting. RESULTS: Changes in the arrangement of the amylopectin double helices of dual-modified starch were evident from X-ray diffraction patterns, pasting profiles and thermal properties. The degree of substitution for acetyl groups was low (0.058 ± 0.006) because crosslinking dominated acetylation. Modified starch film had higher elongation percentage (82.81%) than its native counterpart (57.4%), but lower tensile strength (3.51 MPa for native and 2.17 MPa for dual-modified) and lower crystallinity in fresh and stored films. The sorption isotherms indicated that the dual modification decreased the number of reactive sites for binding water, resulting in a reduction in the monolayer value and a decrease in the solubility and water vapor permeability. CONCLUSIONS: Dual modification of starch may be a feasible option for improving the properties of biodegradable starch films. © 2018 Society of Chemical Industry.

Nanocomposites of rice and banana flours blend with montmorillonite: partial characterization.

Rice and banana flours are inexpensive starchy materials that can form films with more improved properties than those made with their starch because flour and starch present different hydrophobicity. Montmorillonite (MMT) can be used to further improve the properties of starch-based films, which has not received much research attention for starchy flours. The aim of this work was to evaluate the mechanical and barrier properties of nanocomposite films of banana and rice flours as matrix material with addition of MMT as a nanofiller. MMT was modified using citric acid to produce intercalated structures, as verified by the X-ray diffraction pattern. The intercalated MMT was blended with flour slurries, and films were prepared by casting. Nanocomposite films of banana and rice flours presented an increase in the tensile at break and elongation percentage, respectively, more than their respective control films without MMT. This study showed that banana and rice flours could be alternative raw materials to use in making nanocomposite films.

[Yield of starch extraction from plantain (Musa paradisiaca). Pilot plant study]. / Rendimiento del proceso de extraccion de almidon a partir de frutos de platano (Musa paradisiaca). Estudio en planta piloto.

In México, the banana (Musa paradisiaca) is cooked (boiling or deep frying) before being eaten, but the consumption is not very popular and a big quantity of the product is lost after harvesting. The unripe plantain has a high level of starch and due to this the use of banana can be diversified as raw material for starch isolation. The objective of this work was to study the starch yield at pilot plant scale. Experiments at laboratory scale were carried out using the pulp with citric acid to 0,3 % (antioxidant), in order to evaluate the different unitary operations of the process. The starch yield, based on starch presence in the pulp that can be isolated, were between 76 and 86 %, and the values at pilot plant scale were between 63 and 71 %, in different lots of banana fruit. Starch yield values were similar among the diverse lots, showing that the process is reproducible. The lower values of starch recovery at pilot plant scale are due to the loss during sieving operations; however, the amount of starch recovery is good.