Water-Stable Pillared Three-Dimensional Zn-V Bimetal-Organic Framework for Promoted Electrocatalytic Urea Oxidation.

Urea oxidation reaction (UOR) is one of the potential routes in which urea-rich wastewater is used as a source of energy for hydrogen production. Metal-organic frameworks (MOFs) have promising applications in electrocatalytic processes, although there are still challenges in identifying the MOFs' molecular regulation and obtaining practical catalytic systems. The current study sought to synthesize [Zn6(IDC)4(OH)2(Hprz)2]n (Zn-MOF) with three symmetrically independent Zn(II) cations connected via linear N-donor piperazine (Hprz), rigid planar imidazole-4,5-dicarboxylate (IDC3-), and -OH ligands, revealing the 3,4T1 topology. The optimized noble-metal-free Zn0.33V0.66-MOF/NF electrocatalysts show higher robustness and performance compared to those of the parent Zn monometallic MOF/NF electrode and other bimetallic MOFs with different Zn-V molar ratios. The low potential of 1.42 V (vs RHE) at 50 mA cm-2 in 1.0 M KOH with 0.33 M urea required by the developed Zn0.33V0.66-MOF electrode makes its application in the UOR more feasible. The availability of more exposed active sites, ion diffusion path, and higher conductivity result from the distinctive configuration of the synthesized electrocatalyst, which is highly stable and capable of synergistic effects, consequently enhancing the desired reaction. The current research contributes to introducing a practical, cost-effective, and sustainable solution to decompose urea-rich wastewater and produce hydrogen.

Water-Stable Fluorous Metal-Organic Frameworks with Open Metal Sites and Amine Groups for Efficient Urea Electrocatalytic Oxidation.

Urea oxidation reaction (UOR) is one of the promising alternative anodic reactions to water oxidation that has attracted extensive attention in green hydrogen production. The application of specifically designed electrocatalysts capable of declining energy consumption and environmental consequences is one of the major challenges in this field. Therefore, the goal is to achieve a resistant, low-cost, and environmentally friendly electrocatalyst. Herein, a water-stable fluorinated Cu(II) metalorganic framework (MOF) {[Cu2 (L)(H2 O)2 ]·(5DMF)(4H2 O)}n (Cu-FMOF-NH2 ; H4 L = 3,5-bis(2,4-dicarboxylic acid)-4-(trifluoromethyl)aniline) is developed utilizing an angular tetracarboxylic acid ligand that incorporates both trifluoromethyl (-CF3 ) and amine (-NH2 ) groups. The tailored structure of Cu-FMOF-NH2 where linkers are connected by fluoride bridges and surrounded by dicopper nodes reveals a 4,24T1 topology. When employed as electrocatalyst, Cu-FMOF-NH2 requires only 1.31 V versus reversible hydrogen electrode (RHE) to deliver 10 mA cm-2 current density in 1.0 m KOH with 0.33 m urea electrolyte and delivered an even higher current density (50 mA cm-2 ) at 1.47 V versus RHE. This performance is superior to several reported catalysts including commercial RuO2 catalyst with overpotential of 1.52 V versus RHE. This investigation opens new opportunities to develop and utilize pristine MOFs as a potential electrocatalyst for various catalytic reactions.

Low-cost zeolitic carriers for delivery of hydroxychloroquine immunomodulatory agent with antiviral activity.

The coronavirus pandemic prompted scientists to look for active pharmaceutical ingredients that could be effective in treating COVID-19. One of them was hydroxychloroquine, an antimalarial and immunomodulatory agent exhibiting antiviral activity. The anchoring of this drug on porous carriers enables control of its delivery to a specific place in the body, and thus increases bioavailability. In this work, we developed low-cost zeolitic platforms for hydroxychloroquine. The waste solution generated during zeolite production from fly ashes was used in the synthesis of Na-A and Na-X carriers at laboratory and technical scale. The materials were characterized by high purity and single mineral phase composition. The surface charge of zeolites varied from negative at pH 5.8, and 7.2, to positive at pH 1.2. All samples indicated good sorption ability towards hydroxychloroquine. The mechanism of drug adsorption was based on electrostatic interactions and followed the Freundlich model. Zeolitic carriers modified the hydroxychloroquine release profiles at conditions mimicking the pH of body fluids. The mode of drug liberation was affected by particle size distributions, morphological forms, and chemical compositions of zeolites. The most hydroxychloroquine controlled release at pH 5.8 for the Na-X material was noted, which indicates that it can enhance the drug therapeutic efficacy.

Utilization of Phyllanthus emblica fruit stone as a Potential Biomaterial for Sustainable Remediation of Lead and Cadmium Ions from Aqueous Solutions

In the present work, an effort has been made to utilize Phyllanthus emblica (PE) fruit stone as a potential biomaterial for the sustainable remediation of noxious heavy metals viz. Pb(II) and Cd(II) from the aqueous solution using adsorption methodology. Further, to elucidate the adsorption potential of Phyllanthus emblica fruit stone (PEFS), effective parameters, such as contact time, initial metal concentration, temperature, etc., were investigated and optimized using a simple batch adsorption method. It was observed that 80% removal for both the heavy metal ions was carried out within 60 min of contact time at an optimized pH 6. Moreover, the thermodynamic parameters results indicated that the adsorption process in the present study was endothermic, spontaneous, and feasible in nature. The positive value of entropy further reflects the high adsorbent-adsorbate interaction. Thus, based on the findings obtained, it can be concluded that the biosorbent may be considered a potential material for the remediation of these noxious impurities and can further be applied or extrapolated to other impurities.

Controlling the morphology of metal-organic frameworks and porous carbon materials: metal oxides as primary architecture-directing agents.

Owing to their large ratio of surface area to mass and volume, metal-organic frameworks and porous carbons have revolutionized many applications that rely on chemical and physical interactions at surfaces. However, a major challenge today is to shape these porous materials to translate their enhanced performance from the laboratory into macroscopic real-world applications. In this review, we give a comprehensive overview of how the precise morphology control of metal oxides can be transferred to metal-organic frameworks and porous carbon materials. As such, tailored material structures can be designed in 0D, 1D, 2D, and 3D with considerable implications for applications such as in energy storage, catalysis and nanomedicine. Therefore, we predict that major research advances in morphology control of metal-organic frameworks and porous carbons will facilitate the use of these materials in addressing major needs of the society, especially the grand challenges of energy, health, and environment.

The Current Status of MOF and COF Applications.

The amalgamation of different disciplines is at the heart of reticular chemistry and has broadened the boundaries of chemistry by opening up an infinite space of chemical composition, structure, and material properties. Reticular design has enabled the precise prediction of crystalline framework structures, tunability of chemical composition, incorporation of various functionalities onto the framework backbone, and as a consequence, fine-tuning of metal-organic framework (MOF) and covalent organic framework (COF) properties beyond that of any other material class. Leveraging the unique properties of reticular materials has resulted in significant advances from both a fundamental and an applied perspective. Here, we wish to review the milestones in MOF and COF research and give a critical view on progress in their real-world applications. Finally, we briefly discuss the major challenges in the field that need to be addressed to pave the way for industrial applications.

The Influence of Carbon Nature on the Catalytic Performance of Ru/C in Levulinic Acid Hydrogenation with Internal Hydrogen Source.

The influence of the nature of carbon materials used as a support for Ru/C catalysts on levulinic acid hydrogenation with formic acid as a hydrogen source toward gamma-valerolactone was investigated. It has been shown that the physicochemical properties of carbon strongly affect the catalytic activity of Ru catalysts. The relationship between the hydrogen mobility, strength of hydrogen adsorption, and catalytic performance was established. The catalyst possessing the highest number of defects, stimulating metal support interaction, exhibited the highest activity. The effect of the catalyst grain size was also studied. It was shown that the decrease in the grain size resulted in the formation of smaller Ru crystallites on the catalyst surface, which facilitates the activity.

In vivo studies of substances used in the cosmetic industry.

Cosmetic producers are obliged to guarantee the safety and stability of their products. The current legal regulations are based on the European Union Directive (1223/2009) of 30 November 2009. The main aim of the directive is to formulate criteria of safety of a cosmetic product and requirements that it must meet to be placed on the market. A new cosmetic product is subjected to thorough investigation prior to its introduction on the market. It should be studied not only with respect to its safety, but also with respect to its effectiveness declared by the producer. The studies are performed in vivo, by the contact or epidermal patch tests on the human skin.

[Carotenoids as natural antioxidants]. / Karotenoidy jako naturalne antyoksydanty.

Human organisms have many defence mechanisms able to neutralise the harmful effects of the reactive species of oxygen. Antioxidants play an important role in reducing the oxidative damage to the human organism. Carotenoids are among the strongest antioxidants. They have 11 coupled double bonds, so they can be classified as polyisoprenoids, show low polarity and can occur in acyclic, monocyclic or bicyclic forms. The carotenoids of the strongest antioxidant properties are lycopene, lutein, astaxanthin and ß-carotene. Carotenoids with strong antioxidant properties have found wide application in medical, pharmaceutical and cosmetic industries. These compounds are highly active against both reactive oxygen species and free radicals. Comparing ß-carotene, astaxanthin and lycopene with other antioxidants (e.g. vitamin C and E), it can be concluded that these compounds have higher antioxidant activity, e.g. against singlet oxygen. Astaxanthin is a stronger antioxidant compared to ß-carotene, vitamin E and vitamin C, respectively 54, 14 and 65 times. Carotenoids have a salutary effect on our body, making it more resistant and strong to fight chronic diseases. The purpose of this article is to review the literature concerning free radicals and their adverse effects on the human body and carotenoids, as strong, natural antioxidants.

Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization.

Zinc oxide, as a widely used material in optics, electronics, and medicine, requires a complete overview of different conditions for facile and easily reproducible syntheses. Two types of optimization of ZnO hydrothermal preparation from zinc acetate and sodium hydroxide solution are presented, which allowed for obtaining miscellaneous morphologies of materials. The first was a temperature-controlled synthesis from 100 to 200 °C, using citric acid as a capping agent. The formation of hexagonal rods at the lowest temperature was evidenced, which agglomerated to flower-like structures at 110 and 120 °C. It was followed by transformation to flake-like roses at 160 °C, up to disordered structures composed of nanosized plates (>180 °C). The transformations were generated through a temperature change, which had an impact on the diffusion effect of hydroxide and citrate complexes. The second optimization was the hydrothermal synthesis free of organic additives and it included only a pH variation from 7.5 to 13.5. It was found that by utilizing a slow-dropping process and varying amounts of NaOH solutions, it is possible to obtain well-formed hexagonal pellets at pH 8.0-8.5. Strongly basic conditions of pH 11.0 and 13.5 impeded superstructure formations, giving small elongated particles of ZnO. All samples were characterized by high phase purity and crystallinity, with a specific surface area of 18-37 m2/g, whereas particle size distribution indicated a predominance of small particles (<1 µm).

The synergistic effect of Cu-MOF nanoparticles and immunomodulatory agent on SARS-CoV-2 inhibition.

In this work, HKUST-1 and Cu-BDC nanoparticles were used as delivery systems for the early anti-COVID-19 drug, hydroxychloroquine. The antiviral MOF/drug combinations significantly reduced the infectivity of SARS-CoV-2, which can be attributed to the nanometric size of the carriers, the presence of copper in the MOF nodes, and the semi-controlled release of the drug.

Speciation of Oxygen Functional Groups on the Carbon Support Controls the Electrocatalytic Activity of Cobalt Oxide Nanoparticles in the Oxygen Evolution Reaction.

The effective use of the active phase is the main goal of the optimization of supported catalysts. However, carbon supports do not interact strongly with metal oxides, thus, oxidative treatment is often used to enhance the number of anchoring sites for deposited particles. In this study, we set out to investigate whether the oxidation pretreatment of mesoporous carbon allows the depositing of a higher loading and a more dispersed cobalt active phase. We used graphitic ordered mesoporous carbon obtained by a hard-template method as active phase support. To obtain different surface concentrations and speciation of oxygen functional groups, we used a low-temperature oxygen plasma. The main methods used to characterize the studied materials were X-ray photoelectron spectroscopy, transmission electron microscopy, and electrocatalytic tests in the oxygen evolution reaction. We have found that the oxidative pretreatment of mesoporous carbon influences the speciation of the deposited cobalt oxide phase. Moreover, the activity of the electrocatalysts in oxygen evolution is positively correlated with the relative content of the COO-type groups and negatively correlated with the C═O-type groups on the carbon support. Furthermore, the high relative content of COO-type groups on the carbon support is correlated with the presence of well-dispersed Co3O4 nanoparticles. The results obtained indicate that to achieve a better dispersed and thus more catalytically active material, it is more important to control the speciation of the oxygen functional groups rather than to maximize their total concentration.

Amine-Modified Carbon Xerogels as Effective Carbon-Based Adsorbents of Anionic Dye from Aqueous Solutions.

Carbon xerogels were obtained by polycondensation of resorcinol and formaldehyde in a water medium. Their surface was oxidized by ammonium persulfate and then modified with amine groups. Four amines were used: methylamine, ethylamine, propylamine, and ethylenediamine, differing in carbon chain length and number of amine groups. The materials were characterized by low-temperature nitrogen sorption, elemental analysis, thermal analysis, X-ray diffraction, infrared spectroscopy, and determination of the surface oxygen group content with the use of the Boehm method. The final carbon adsorbents had surface areas ranging from 172-663 m2/g and acid-base nature. They were applied for adsorption of thymol blue from water solution. The sorption capacities of the studied adsorbents ranged from 83 to 140 mg/g. The presence of amine groups on the xerogel surface was found to increase its sorption capacity towards the dye studied. The dye adsorption process is endothermic and spontaneous, as indicated by the positive values of ΔH and the negative values of ΔG, respectively. The kinetics of adsorption of thymol blue was established to be described by the pseudo-second-order model. The equilibrium data were analyzed by the Langmuir and Freundlich models. The character of thymol blue adsorption is much better described by the Langmuir isotherm.

Equilibrium, Kinetic, and Thermodynamic Studies on Adsorption of Rhodamine B from Aqueous Solutions Using Oxidized Mesoporous Carbons.

Oxidized mesoporous carbon CSBA-15, obtained by the hard method, was applied to remove rhodamine B from the aqueous system. The process of carbon oxidation was performed using 0.5 and 5 M of nitric (V) acid solution at 70 and 100 °C. Functionalization of mesoporous carbon with HNO3 solutions led to reduction in the surface area, pore volume, and micropore area, however, it also led to an increased number of oxygen functional groups of acidic character. The functional groups probably are located at the entrance of micropores, in this way, reducing the values of textural parameters. Isotherms of rhodamine B adsorption indicate that the oxidation of mesoporous carbons resulted in an increase in the effectiveness of the removal of this dye from aqueous solutions. The influence of temperature, pH, and contact time of mesoporous material/rhodamine B on the effectiveness of dye removal was tested. The process of dye adsorption on the surfaces of the materials studied was established to be most effective at pH 12 and at 60 °C. Kinetic studies of the process of adsorption proved that the equilibrium state between the dye molecules and mesoporous carbon materials is reached after about 1 h. The adsorption kinetics were well fitted using a pseudo-second-order model. The most effective in rhodamine B removal was the sample CSBA-15-5-100, containing the greatest number of oxygen functional groups of acidic character. The Langmuir model best represented equilibrium data.

On the importance of physicochemical parameters of copper and aminosilane functionalized mesoporous silica for hydroxychloroquine release.

Recently, great attention has been paid to hydroxychloroquine which after promising in vitro studies has been proposed to treat the severe acute respiratory syndrome caused by SARS-CoV-2. The clinical trials have shown that hydroxychloroquine was not as effective as was expected and additionally, several side effects were observed in patients cured with this medicament. In order to reduce them, it is suggested to deliver hydroxychloroquine in a controlled manner. Therefore, in this study non-modified (SBA-15, SBA-16) and modified with copper and aminosilane mesoporous silica materials were applied as novel nanocarriers for hydroxychloroquine. First, pristine and functionalized samples were synthesized and characterized by X-ray diffraction, low-temperature nitrogen sorption, transmission electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, laser diffraction. Then the influence of physicochemical parameters of materials obtained on the adsorption and release processes of hydroxychloroquine was analyzed. The mechanism of hydroxychloroquine binding to non-modified silicas was based on the formation of hydrogen bonds, while in the case of copper and aminosilane functionalized materials the complexes with drug molecules were generated. The release behavior of hydroxychloroquine from silica samples obtained was determined by different factors including pH conditions, textural parameters, surface charge, and presence of surface functional groups. The greatest differences in hydroxychloroquine release profiles between materials were observed at pH 7.2. The amount of drug desorbed from silica decreased in the following order: functionalized SBA-15 (84%) > functionalized SBA-16 (79%) > SBA-15 (59%) > SBA-16 (33%). It proved that a higher amount of drug was released from materials of hexagonal structure.

Overcoming the paracetamol dose challenge with wrinkled mesoporous carbon spheres.

Paracetamol is the most commonly used antipyretic and analgesic drug in the world. The key challenge in paracetamol therapy is associated with the frequency of the dosing. Depending on the gastric filling within 10-20 min paracetamol is released and rapidly absorbed from the gastrointestinal tract. Therefore, it must be taken three or four times a day. To address the dose challenge it is desirable that the paracetamol release profile follows the zero-order kinetic model (constant rate of drug release per unit time). This goal can be achieved by using a suitable porous carrier system. Herein, non-toxic wrinkled mesoporous carbons with unique morphology were synthesized via the hard template method as new carriers for paracetamol. These particles can precisely modulate the release of paracetamol over 24 h in a simulated gastric fluid according to the zero-order kinetic model completely eliminating the initial burst release. Overall, these systems could significantly enhance the bioavailability of paracetamol and prolong its therapeutic effect in numerous diseases such as cold, flu, COVID-19, and severe pain.

Synthesis and Characterization of Nanoporous Carbon Carriers for Losartan Potassium Delivery.

Losartan potassium is most commonly used for the treatment of hypertension. In recent years, new applications of this drug have emerged, encouraging the design of novel nanoporous carriers for its adsorption and release. The purpose of this study was to synthesize ordered mesoporous carbon vehicles via a soft-templating method altered with the use of nitrogen precursors and via a hard-templating method followed by chitosan functionalization. As a result, the materials obtained differed in nitrogen content as well as in the number of total surface functional groups. The impact of the modification on the physicochemical properties of carbon carriers and their interaction with losartan potassium during adsorption and release processes was examined. The materials were characterized by various morphologies, specific surface areas (101-1180 m2 g-1), and the amount of acidic/basic oxygen-containing functional groups (1.26-4.27 mmol g-1). These features, along with pore sizes and volumes, had a key effect on the sorption capacity of carbon carriers towards losartan potassium (59-161 mg g-1). Moreover, they contributed to the differential release of the drug (18.56-90.46%). Losartan potassium adsorption onto the surface of carbonaceous materials was mainly based on the formation of hydrogen bonds and π-π interactions and followed the Langmuir type isotherm. It has been shown that the choice of the method of carbon carriers' synthesis and their modification allows for the precise control of the kinetics of the losartan potassium release from their surface, resulting in rapid or sustained drug liberation.

Amine-Grafted Mesoporous Carbons as Benzocaine-Delivery Platforms.

Smart porous carriers with defined structure and physicochemical properties are required for releasing the therapeutic drug with precise control of delivery time and location in the body. Due to their non-toxicity, ordered structure, and chemical and thermal stability, mesoporous carbons can be considered modern carriers for active pharmaceutical ingredients whose effectiveness needs frequent dosing algorithms. Here, the novel benzocaine delivery systems based on ordered mesoporous carbons of the cubic structure were obtained with the use of a hard template method and functionalization with amine groups at 40 °C for 8 h. It has been shown that amine grafting strongly modifies the surface chemistry and textural parameters of carbons. All samples indicated good sorption ability towards benzocaine, with evident improvement following the functionalization with the amine groups. The sorption capacity and drug release kinetics were strongly affected by the porosity of carbon carriers and the surface functional groups. The smallest amount of benzocaine (~12%) was released from pristine mesoporous carbon, which could be correlated with strong API-carrier interactions. Faster and more efficient release of the drug was observed in the case of triethylenetetramine modified carbon (~62%). All benzocaine delivery platforms based on amine-grafted mesoporous carbons revealed high permeability through the artificial membrane.

Design of Paracetamol Delivery Systems Based on Functionalized Ordered Mesoporous Carbons.

The oxidized ordered mesoporous carbons of cubic and hexagonal structure obtained by two templating methods (soft and hard) were applied for the first time as delivery systems for paracetamol-the most common antipyretic and analgesic drug in the world. The process of carbon oxidation was performed using an acidic ammonium persulfate solution at 60 °C for 6 h. The functionalization was found to reduce the specific surface area and pore volume of carbon materials, but it also led to an increasing number of acidic oxygen-containing functional groups. The most important element and the novelty of the presented study was the evaluation of adsorption and release ability of carbon carriers towards paracetamol. It was revealed that the sorption capacity and the drug release rate were mainly affected by the materials' textural parameters and the total amount of surface functional groups, notably different in pristine and oxidized samples. The adsorption of paracetamol on the surface of ordered mesoporous carbons occurred according to different mechanisms: donor-acceptor complexes and hydrogen bond formation. The adsorption kinetics was assessed using pseudo-first- and pseudo-second-order models. The regression results indicated that the adsorption kinetics was more accurately represented by the pseudo-second-order model. Paracetamol was adsorbed onto the carbon materials studied following the Langmuir type isotherm. The presence of oxygen-containing functional groups on the surface of ordered mesoporous carbons enhanced the amount of paracetamol adsorbed and its release rate. The optimal drug loading capacity and expected release pattern exhibited oxidized ordered mesoporous carbon with a hexagonal structure obtained by the hard template method.

Hydrothermal-assisted synthesis of highly crystalline titania-copper oxide binary systems with enhanced antibacterial properties.

Binary oxide systems containing TiO2 and CuO were synthesized using hydrothermal treatment and shown to have enhanced antibacterial properties. A detailed investigation was made of the effect of the molar ratio of components (TiO2:CuO = 7:3, 5:5, 3:7, 1:9) on the physicochemical parameters and antibacterial activity. Analysis of morphology (SEM, TEM and HRTEM) confirmed the presence of spherical and sheet-shaped particles. On the XRD patterns for the binary oxide materials, two crystalline forms (anatase and monoclinic CuO) were observed. It was found that an increase in CuO content led to a decrease in the BET surface area of the TiO2-CuO binary oxide systems. The synthesized TiO2-CuO materials exhibited very good antibacterial activity against both Gram-positive (methicillin-resistant Staphylococcus aureus and Bacillus cereus) and Gram-negative (Salmonella Enteritidis and Pseudomonas aeruginosa) bacteria. The obtained results show that TiO2-CuO oxide materials may have applications in the biomedical and food industries.