RESUMO
Plano-convex microlens arrays of organic-inorganic polymers with tailored optical properties are presented. The fine-tuning of each microlens within an array is achieved by confining inkjet printed drops of the polymeric ink onto pre-patterned substrates. The lens optical properties are thus freely specified, and high numerical apertures from 0.45 to 0.9 and focal lengths between 10 µm and 100 µm are demonstrated, confirming theoretical predictions. Combining nanoimprint lithography approaches and inkjet printing enables using the same material for the microlenses and their substrates, improving the optical performances. Microlens arrays with desired specifications are printed reaching yields up to 100% and high lens reproducibility with standard deviations of the apparent contact angle under 1° and of the numerical apertures and focal lengths under 6%. Microlens arrays involving lenses with different characteristics, e.g. multi focal length, and thus focal planes separated by only few microns are printed with the same reproducibility.
RESUMO
An all-polymer photonic crystal slab sensor is presented, and shown to exhibit narrow resonant reflection with a FWHM of less than 1 nm and a sensitivity of 31 nm/RIU when sensing media with refractive indices around that of water. This results in a detection limit of 4.5 × 10(-6) RIU when measured in conjunction with a spectrometer of 12 pm/pixel resolution. The device is a two-layer structure, composed of a low refractive index polymer with a periodically modulated surface height, covered with a smooth upper-surface high refractive index inorganic-organic hybrid polymer modified with ZrO2based nanoparticles. Furthermore, it is fabricated using inexpensive vacuum-less techniques involving only UV nanoreplication and polymer spin-casting, and is thus well suited for single-use biological and refractive index sensing applications.
RESUMO
Optical coherence tomography (OCT) is an emerging technique for cross-sectional imaging, originally developed for biological structures. When OCT is employed for material investigation, high-resolution and short measurement times are required, and for many applications, only transversal (en-face) scans yield substantial information which cannot be obtained from cross-sectional images oriented perpendicularly to the sample surface alone. In this work, we combine transversal with ultra-high resolution OCT: a broadband femto-second laser is used as a light source in combination with acousto-optic modulators for heterodyne signal generation and detection. With our setup we are able to scan areas as large as 3 x 3 mm2 with a sensitivity of 100 dB, representing areas 100 times larger compared to other high-resolution en-face OCT systems (full field). We demonstrate the benefits of en-face scanning for different applications in materials investigation.