RESUMO
Flexible nanoporous materials are of great interest for applications in many fields such as sensors, catalysis, material separation, and energy storage. Of these, metal-organic frameworks (MOFs) are the most explored thus far. However, tuning their flexibility for a particular application remains challenging. In this work, we explore the effect of the exogenous property of crystallite size on the flexibility of the ZIF-8 MOF. By subjecting hydrophobic ZIF-8 to hydrostatic compression with water, the flexibility of its empty framework and the giant negative compressibility it experiences during water intrusion were recorded via in operando synchrotron irradiation. It was observed that as the crystallite size is reduced to the nanoscale, both flexibility and the negative compressibility of the framework are reduced by â¼25% and â¼15%, respectively. These results pave the way for exogenous tuning of flexibility in MOFs without altering their chemistries.
RESUMO
The entire world has been suffering from the coronavirus disease 2019 (COVID-19) pandemic since March 11, 2020. More than a year later, the COVID-19 vaccination brought hope to control this viral pandemic. Here, we review the unknowns of the COVID-19 vaccination, such as its longevity, asymptomatic spread, long-term side effects, and its efficacy on immunocompromised patients. In addition, we discuss challenges associated with the COVID-19 vaccination, such as the global access and distribution of vaccine doses, adherence to hygiene guidelines after vaccination, the emergence of novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants, and vaccine resistance. Despite all these challenges and the fact that the end of the COVID-19 pandemic is still unclear, vaccines have brought great hope for the world, with several reports indicating a significant decline in the risk of COVID19-related infection and hospitalizations.
Assuntos
COVID-19/prevenção & controle , SARS-CoV-2/imunologia , Vacinação , COVID-19/epidemiologia , COVID-19/imunologia , COVID-19/virologia , Vacinas contra COVID-19/administração & dosagem , Vacinas contra COVID-19/efeitos adversos , Vacinas contra COVID-19/imunologia , Vacinas contra COVID-19/provisão & distribuição , Saúde Global , Humanos , Hospedeiro Imunocomprometido , Mutação , SARS-CoV-2/genética , Vacinação/efeitos adversos , Vacinação/psicologia , Hesitação Vacinal , Eficácia de VacinasRESUMO
In the ever-increasing energy demand scenario, the development of novel photovoltaic (PV) technologies is considered to be one of the key solutions to fulfil the energy request. In this context, graphene and related two-dimensional (2D) materials (GRMs), including nonlayered 2D materials and 2D perovskites, as well as their hybrid systems, are emerging as promising candidates to drive innovation in PV technologies. The mechanical, thermal, and optoelectronic properties of GRMs can be exploited in different active components of solar cells to design next-generation devices. These components include front (transparent) and back conductive electrodes, charge transporting layers, and interconnecting/recombination layers, as well as photoactive layers. The production and processing of GRMs in the liquid phase, coupled with the ability to "on-demand" tune their optoelectronic properties exploiting wet-chemical functionalization, enable their effective integration in advanced PV devices through scalable, reliable, and inexpensive printing/coating processes. Herein, we review the progresses in the use of solution-processed 2D materials in organic solar cells, dye-sensitized solar cells, perovskite solar cells, quantum dot solar cells, and organic-inorganic hybrid solar cells, as well as in tandem systems. We first provide a brief introduction on the properties of 2D materials and their production methods by solution-processing routes. Then, we discuss the functionality of 2D materials for electrodes, photoactive layer components/additives, charge transporting layers, and interconnecting layers through figures of merit, which allow the performance of solar cells to be determined and compared with the state-of-the-art values. We finally outline the roadmap for the further exploitation of solution-processed 2D materials to boost the performance of PV devices.
RESUMO
Pandemics are enormous threats to the world that impact all aspects of our lives, especially the global economy. The COVID-19 pandemic has emerged since December 2019 and has affected the global economy in many ways. As the world becomes more interconnected, the economic impacts of the pandemic become more serious. In addition to increased health expenditures and reduced labor force, the pandemic has hit the supply and demand chain massively and caused trouble for manufacturers who have to fire some of their employees or delay their economic activities to prevent more loss. With the closure of manufacturers and companies and reduced travel rates, usage of oil after the beginning of the pandemic has decreased significantly that was unprecedented in the last 30 years. The mining industry is a critical sector in several developing countries, and the COVID-19 pandemic has hit this industry too. Also, world stock markets declined as investors started to become concerned about the economic impacts of the COVID-19 pandemic. The tourism industry and airlines have also experienced an enormous loss too. The GDP has reduced, and this pandemic will cost the world more than 2 trillion at the end of 2020.
Assuntos
COVID-19 , Pandemias , Humanos , Indústrias , Pandemias/prevenção & controle , SARS-CoV-2 , ViagemRESUMO
Engineering 2D/3D perovskite interfaces is a common route to realizing efficient and stable perovskite solar cells. Whereas 2D perovskite's main function in trap passivation has been identified and is confirmed here, little is known about its 2D/3D interface properties under thermal stress, despite being one of the main factors that induces device instability. In this work, we monitor the response of two typical 2D/3D interfaces under a thermal cycle by in situ X-ray scattering. We reveal that upon heating, the 2D crystalline structure undergoes a dynamical transformation into a mixed 2D/3D phase, keeping the 3D bulk underneath intact. The observed 3D bulk degradation into lead iodide is blocked, revealing the paramount role of 2D perovskite in engineering stable device interfaces.
RESUMO
2D hybrid perovskites (2DP) are versatile materials, whose electronic and optical properties can be tuned through the nature of the organic cations (even when those are seemingly electronically inert). Here, it is demonstrated that fluorination of the organic ligands yields glassy 2DP materials featuring long-lived correlated electron-hole pairs. Such states have a marked charge-transfer character, as revealed by the persistent Stark effect in the form of a second derivative in electroabsorption. Modeling shows that electrostatic effects associated with fluorination, combined with the steric hindrance due to the bulky side groups, drive the formation of spatially dislocated charge pairs with reduced recombination rates. This work enriches and broadens the current knowledge of the photophysics of 2DP, which will hopefully guide synthesis efforts toward novel materials with improved functionalities.
RESUMO
Hybrid perovskite solar cells have been capturing an enormous research interest in the energy sector due to their extraordinary performances and ease of fabrication. However, low device lifetime, mainly due to material and device degradation upon water exposure, challenges their near-future commercialization. Here, we synthesized a new fluorous organic cation used as organic spacer to form a low-dimensional perovskite (LDP) with an enhanced water-resistant character. The LDP is integrated with three-dimensional (3D) perovskite absorbers in the form of MA0.9FA0.1PbI3 (FA = NH2CH = NH2+, MA = CH3NH3+) and Cs0.1FA0.74MA0.13PbI2.48Br0.39. In both cases, a LDP layer self-assembles as a thin capping layer on the top of the 3D bulk, making the perovskite surface hydrophobic. Our easy and robust approach, validated for different perovskite compositions, limits the interface deterioration in perovskite solar cells yielding to >20% power conversion efficient solar cells with improved stability, especially pronounced in the first hours of functioning under environmental conditions. As a consequence, single and multijunction perovskite devices, such as tandem solar cells, can benefit from the use of the waterproof stabilization here demonstrated, a concept which can be further expanded in the perovskite optoelectronic industry beyond photovoltaics.
RESUMO
With a power conversion efficiency (PCE) exceeding 22 %, perovskite solar cells (PSCs) have thrilled photovoltaic research. However, the interface behavior is still not understood and is a hot topic of research: different processes occur over a hierarchy of timescales, from femtoseconds to seconds, which makes perovskite interface physics intriguing. Herein, through femtosecond transient absorption spectroscopy with spectral coverage extending into the crucial IR region, the ultrafast interface-specific processes at standard and newly molecularly engineered perovskite interfaces in state-of-the-art PSCs are interrogated. Ultrafast interfacial charge injection occurs with a time constant of 100â fs, resulting in hot transfer from energetic charges and setting the timescale for the first step involved in the complex charge-transfer process. This is also true for 20 % efficient devices measured under real operation, for which the femtosecond injection is followed by a slower picosecond component. These findings provide compelling evidence for the femtosecond interfacial charge-injection step and demonstrate a robust method for the straightforward identification of interfacial non-equilibrium processes on the ultrafast timescale.
RESUMO
Interfacial engineering of the meso-TiO2 surface through a modified sequential deposition procedure involving a novel PbI2-HMPA complex pretreatment is conducted as a reproducible method for preparing MAPbI3 based perovskite solar cells providing the highest efficiencies yet reported with the polymer HTM layer. Grazing-incidence X-ray diffraction depth profiling confirms the formation of a perovskite film with a PbI2-rich region close to the electron transport layer (ETL) due to the strong interaction of HMPA with PbI2, which successfully retarded the dissolution of the PbI2 phase when depositing the perovskite layer on top. These results are further confirmed by energy-dispersive X-ray spectroscopy performed in a scanning transmission electron microscope, which reveals that the I/Pb ratio in samples treated with the complex is indeed reduced in the vicinity of the ETL contact when compared to samples without the treatment. The engineered interface leads to an average power conversion efficiency of 19.2% (reverse scan, standard deviation SD < 0.2) over 30 cells (best cell at 19.5% with high FF of 0.80).
RESUMO
Compositional engineering of a mixed cation/mixed halide perovskite in the form of (FAPbI3)0.85(MAPbBr3)0.15 is one of the most effective strategies to obtain record-efficiency perovskite solar cells. However, the perovskite self-organization upon crystallization and the final elemental distribution, which are paramount for device optimization, are still poorly understood. Here we map the nanoscale charge carrier and elemental distribution of mixed perovskite films yielding 20% efficient devices. Combining a novel in-house-developed high-resolution helium ion microscope coupled with a secondary ion mass spectrometer (HIM-SIMS) with Kelvin probe force microscopy (KPFM), we demonstrate that part of the mixed perovskite film intrinsically segregates into iodide-rich perovskite nanodomains on a length scale of up to a few hundred nanometers. Thus, the homogeneity of the film is disrupted, leading to a variation in the optical properties at the micrometer scale. Our results provide unprecedented understanding of the nanoscale perovskite composition.
RESUMO
Despite rapid developments in both photovoltaic and light-emitting device performance, the understanding of the optoelectronic properties of hybrid lead halide perovskites is still incomplete. In particular, the polarizability of the material, the presence of molecular dipoles, and their influence on the dynamics of the photoexcitations remain an open issue to be clarified. Here, we investigate the effect of an applied external electric field on the photoexcited species of CH3NH3PbI3 thin films, both at room temperature and at low temperature, by monitoring the photoluminescence (PL) yield and PL decays. At room temperature we find evidence for electric-field-induced reduction of radiative bimolecular carrier recombination together with motion of charged defects that affects the nonradiative decay rate of the photoexcited species. At low temperature (190 K), we observe a field-induced enhancement of radiative free carrier recombination rates that lasts even after the removal of the field. We assign this to field-induced alignment of the molecular dipoles, which reduces the vibrational freedom of the lattice and the associated local screening and hence results in a stronger electron-hole interaction.
RESUMO
Organic-inorganic halide perovskites, such as CH3NH3PbX3 (X = I(-), Br(-), Cl(-)), are attracting growing interest to prepare low-cost solar cells that are capable of converting sunlight to electricity at the highest efficiencies. Despite negligible effort on enhancing materials' purity or passivation of surfaces, high efficiencies have already been achieved. Here, we show that trap states at the perovskite surface generate charge accumulation and consequent recombination losses in working solar cells. We identify that undercoordinated iodine ions within the perovskite structure are responsible and make use of supramolecular halogen bond complexation to successfully passivate these sites. Following this strategy, we demonstrate solar cells with maximum power conversion efficiency of 15.7% and stable power output over 15% under constant 0.81 V forward bias in simulated full sunlight. The surface passivation introduces an important direction for future progress in perovskite solar cells.
RESUMO
We investigate the role of excess excitation energy on the nature of photoexcitations in donor-acceptor π-conjugated materials. We compare the polymer poly(2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[1,2-b;3,4-b']dithiophene)-4,7-benzo[2,1,3]thiadiazole) (PCPDTBT) and a short oligomer with identical constituents at different excitation wavelengths, from the near-infrared up to the ultraviolet spectral region. Ultrafast spectroscopic measurements clearly show an increased polaron pair yield for higher excess energies directly after photoexcitation when compared to the exciton population. This effect, already observable in the polymer, is even more pronounced for the shorter oligomer. Supported by quantum chemical simulations, we show that excitation in high-energy states generates electron and hole wave functions with reduced overlap, which likely act as precursors for the polaron pairs. Interestingly, in the oligomer we observe a lifetime of polaron pairs which is one order of magnitude longer. We suggest that this behavior results from the intermolecular nature of polaron pairs in oligomers. The study excludes the presence of carrier multiplication in these materials and highlights new aspects in the photophysics of donor-acceptor small molecules when compared to polymers. The former are identified as promising materials for efficient organic photovoltaics.
RESUMO
The levelized cost of electricity (LCOE) is a techno-economic analysis that evaluates the cost potential of any electricity-producing technology. LCOE represents a powerful metric to compare the most efficient renewable resources in the framework of the energy transition. Perovskite solar cells (PSCs) are an emerging technology with great potential to establish a leading position in the photovoltaic (PV) market, particularly in those regions that cannot rely on crystalline silicon manufacturing. However, like many emerging technologies, their positioning in the PV market is still quite speculative. Here, we revise the different models to evaluate the LCOE of PSCs, paying attention to the impact of performance, stability, and manufacturing costs. We consider the difference in performances from lab-record devices to modules fabricated in industrial production lines. We identify the key role of the degradation that is hindering the commercialization of PSCs and we analyze the manufacturing cost and the supply chain availability. From our analysis, we restricted the LCOE to 3-6 cents (USD) per kWh, which is competitive with the best of the mainstream silicon technologies (passivated emitter and rear contact, PERC). In conclusion, we highlight the future challenges to refine the LCOE calculations, including temperature effects.
RESUMO
Ferroelectric ceramics such as PbZrxTi1-xO3 (PZT) are widely applied in many fields, from medical to aerospace, because of their dielectric, piezoelectric, and pyroelectric properties. In the past few years, hybrid organic-inorganic halide perovskites have gradually attracted attention for their optical and electronic properties, including ferroelectricity, and for their low fabrication costs. In this Review, we first describe techniques that are used to quantify ferroelectric figures of merit of a material. We then discuss ferroelectricity in hybrid perovskites, starting from controversies in methylammonium iodoplumbate perovskites and then focusing on low-dimensional perovskites that offer an unambiguous platform to obtain ferroelectricity. Finally, we provide examples of the application of perovskite ferroelectrics in solar cells, LEDs, and X-ray detectors. We conclude that the vast structure-property tunability makes low-dimensional hybrid perovskites promising, but they have yet to offer ferroelectric figures of merit (e.g., saturated polarization) and thermal stability (e.g., Curie temperature) competitive with those of conventional oxide perovskite ferroelectric materials.
RESUMO
Hybrid perovskites have been considered a hot material in the semiconductor industry; included as an active layer in advanced devices, from light emitting applications to solar cells, where they lead as a new strategic solution, they promise to be the next generation high impact class of materials. However, the presence - in most cases - of lead in their matrix, or lead byproducts as a consequence of material degradation, such as PbI2, is currently hindering their massive deployment. Here, we develop a fluorescent organic sensor (FS) based on the Pb-selective BODIPY fluorophore that emits when the analyte - lead in this case - is detected. We carried out a fluorimetric analysis to quantify the trace concentration of Pb2+ released from lead-based perovskite solar cells, exploring different material compositions. In particular, we immersed the devices in rainwater, to simulate the behavior of the devices under atmospheric conditions when the sealing is damaged. The sensor is studied in a phosphate buffer solution (PBS) at pH 4.5 to simulate the pH of acidic rain, and the results obtained are compared with ICP-OES measurements. We found that with fluorometric analysis, lead concentration could be calculated with a detection limit as low as 5 µg l-1, in agreement with ICP-OES analysis. In addition, we investigated the possibility of using the sensor on a solid substrate for direct visualization to determine the presence of Pb. This can constitute the base for the development of a Pb-based label that can switch on if lead is detected, alerting any possible leakage.
RESUMO
Perovskite solar cells (PSCs) longevity is nowadays the bottleneck for their full commercial exploitation. Although lot of research is ongoing, the initial decay of the output power - an effect known as "burn-in" degradation happening in the first 100 h - is still unavoidable, significantly reducing the overall performance (typically of >20%). In this paper, the origin of the "burn-in" degradation in n-i-p type PSCs is demonstrated that is directly related to Li+ ions migration coming from the SnO2 electron transporting layer visualized by time-of-flight secondary ion mass spectrometry (TOF-SIMS) measurements. To block the ion movement, a thin cross-linked [6,6]-phenyl-C61-butyric acid methyl ester layer on top of the SnO2 layer is introduced, resulting in Li+ immobilization. This results in the elimination of the "burn-in" degradation, showing for the first time a zero "burn-in" loss in the performances while boosting device power conversion efficiency to >22% for triple-cation-based PSCs and >24% for formamidinium-based (FAPbI3 ) PSCs, proving the general validity of this approach and creating a new framework for the realization of stable PSCs devices.
RESUMO
Hybrid perovskites have emerged as a promising material candidate for exciton-polariton (polariton) optoelectronics. Thermodynamically, low-threshold Bose-Einstein condensation requires efficient scattering to the polariton energy dispersion minimum, and many applications demand precise control of polariton interactions. Thus far, the primary mechanisms by which polaritons relax in perovskites remains unclear. In this work, we perform temperature-dependent measurements of polaritons in low-dimensional perovskite wedged microcavities achieving a Rabi splitting of [Formula: see text] = 260 ± 5 meV. We change the Hopfield coefficients by moving the optical excitation along the cavity wedge and thus tune the strength of the primary polariton relaxation mechanisms in this material. We observe the polariton bottleneck regime and show that it can be overcome by harnessing the interplay between the different excitonic species whose corresponding dynamics are modified by strong coupling. This work provides an understanding of polariton relaxation in perovskites benefiting from efficient, material-specific relaxation pathways and intracavity pumping schemes from thermally brightened excitonic species.