Nanopore Sequencing for Mycobacterium tuberculosis: a Critical Review of the Literature, New Developments, and Future Opportunities.

The next-generation, short-read sequencing technologies that generate comprehensive, whole-genome data with single nucleotide resolution have already advanced tuberculosis diagnosis, treatment, surveillance, and source investigation. Their high costs, tedious and lengthy processes, and large equipment remain major hurdles for research use in high tuberculosis burden countries and implementation into routine care. The portable next-generation sequencing devices developed by Oxford Nanopore Technologies (ONT) are attractive alternatives due to their long-read sequence capability, compact low-cost hardware, and continued improvements in accuracy and throughput. A systematic review of the published literature demonstrated limited uptake of ONT sequencing in tuberculosis research and clinical care. Of the 12 eligible articles presenting ONT sequencing data on at least one Mycobacterium tuberculosis sample, four addressed software development for long-read ONT sequencing data with potential applications for M. tuberculosis. Only eight studies presented results of ONT sequencing of M. tuberculosis, of which five performed whole-genome and three did targeted sequencing. Based on these findings, we summarize the standard processes, reflect on the current limitations of ONT sequencing technology, and the research needed to overcome the main hurdles. The low capital cost, portable nature and continued improvement in the performance of ONT sequencing make it an attractive option for sequencing for research and clinical care, but limited data are available on its application in the tuberculosis field. Important research investment is needed to unleash the full potential of ONT sequencing for tuberculosis research and care.

Droplet based whole genome amplification for sequencing minute amounts of purified Mycobacterium tuberculosis DNA.

Implementation of whole genome sequencing (WGS) for patient care is hindered by limited Mycobacterium tuberculosis (Mtb) in clinical specimens and slow Mtb growth. We evaluated droplet multiple displacement amplification (dMDA) for amplification of minute amounts of Mtb DNA to enable WGS as an alternative to other Mtb enrichment methods. Purified genomic Mtb-DNA (0.1, 0.5, 1, and 5 pg) was encapsulated and amplified using the Samplix Xdrop-instrument and sequenced alongside a control sample using standard Illumina protocols followed by MAGMA-analysis. The control and 5 pg input dMDA samples underwent nanopore sequencing followed by Nanoseq and TB-profiler analysis. dMDA generated 105-2400 ng DNA from the 0.1-5 pg input DNA, respectively. Followed by Illumina WGS, dMDA raised mean sequencing depth from 7 × for 0.1 pg input DNA to ≥ 60 × for 5 pg input and the control sample. Bioinformatic analysis revealed a high number of false positive and false negative variants when amplifying ≤ 0.5 pg input DNA. Nanopore sequencing of the 5 pg dMDA sample presented excellent coverage depth, breadth, and accurate strain characterization, albeit elevated false positive and false negative variants compared to Illumina-sequenced dMDA sample with identical Mtb DNA input. dMDA coupled with Illumina WGS for samples with ≥ 5 pg purified Mtb DNA, equating to approximately 1000 copies of the Mtb genome, offers precision for drug resistance, phylogeny, and transmission insights.

Evaluation of Nanopore sequencing for Mycobacterium tuberculosis drug susceptibility testing and outbreak investigation: a genomic analysis.

BACKGROUND: Mycobacterium tuberculosis whole-genome sequencing (WGS) has been widely used for genotypic drug susceptibility testing (DST) and outbreak investigation. For both applications, Illumina technology is used by most public health laboratories; however, Nanopore technology developed by Oxford Nanopore Technologies has not been thoroughly evaluated. The aim of this study was to determine whether Nanopore sequencing data can provide equivalent information to Illumina for transmission clustering and genotypic DST for M tuberculosis. METHODS: In this genomic analysis, we analysed 151 M tuberculosis isolates from Madagascar, South Africa, and England, which were collected between 2011 and 2018, using phenotypic DST and matched Illumina and Nanopore data. Illumina sequencing was done with the MiSeq, HiSeq 2500, or NextSeq500 platforms and Nanopore sequencing was done on the MinION or GridION platforms. Using highly reliable PacBio sequencing assemblies and pairwise distance correlation between Nanopore and Illumina data, we optimise Nanopore variant filters for detecting single-nucleotide polymorphisms (SNPs; using BCFtools software). We then used those SNPs to compare transmission clusters identified by Nanopore with the currently used UK Health Security Agency Illumina pipeline (COMPASS). We compared Illumina and Nanopore WGS-based DST predictions using the Mykrobe software and mutation catalogue. FINDINGS: The Nanopore BCFtools pipeline identified SNPs with a median precision of 99·3% (IQR 99·1-99·6) and recall of 90·2% (88·1-94·2) compared with a precision of 99·6% (99·4-99·7) and recall of 91·9% (87·6-98·6) using the Illumina COMPASS pipeline. Using a threshold of 12 SNPs for putative transmission clusters, Illumina identified 98 isolates as unrelated and 53 as belonging to 19 distinct clusters (size range 2-7). Nanopore reproduced 15 out of 19 clusters perfectly; two clusters were merged into one cluster, one cluster had a single sample missing, and one cluster had an additional sample adjoined. Illumina-based clusters were also closely replicated using a five SNP threshold and clustering accuracy was maintained using mixed Illumina and Nanopore datasets. Genotyping resistance variants with Nanopore was highly concordant with Illumina, having zero discordant SNPs across more than 3000 SNPs and four insertions or deletions (indels), across 60 000 indels. INTERPRETATION: Illumina and Nanopore technologies can be used independently or together by public health laboratories performing M tuberculosis genotypic DST and outbreak investigations. As a result, clinical and public health institutions making decisions on which sequencing technology to adopt for tuberculosis can base the choice on cost (which varies by country), batching, and turnaround time. FUNDING: Academy for Medical Sciences, Oxford Wellcome Institutional Strategic Support Fund, and the Swiss South Africa Joint Research Award (Swiss National Science Foundation and South African National Research Foundation).

Microfluidic Capture of Mycobacterium tuberculosis from Clinical Samples for Culture-Free Whole-Genome Sequencing.

Mycobacterium tuberculosis whole-genome sequencing (WGS) is a powerful tool as it can provide data on population diversity, drug resistance, disease transmission, and mixed infections. Successful WGS is still reliant on high concentrations of DNA obtained through M. tuberculosis culture. Microfluidics technology plays a valuable role in single-cell research but has not yet been assessed as a bacterial enrichment strategy for culture-free WGS of M. tuberculosis. In a proof-of-principle study, we evaluated the use of Capture-XT, a microfluidic lab-on-chip cleanup and pathogen concentration platform to enrich M. tuberculosis bacilli from clinical sputum specimens for downstream DNA extraction and WGS. Three of the four (75%) samples processed by the microfluidics application passed the library preparation quality control, compared to only one of the four (25%) samples not enriched by the microfluidics M. tuberculosis capture application. WGS data were of sufficient quality, with mapping depth of ≥25× and 9 to 27% of reads mapping to the reference genome. These results suggest that microfluidics-based M. tuberculosis cell capture might be a promising method for M. tuberculosis enrichment in clinical sputum samples, which could facilitate culture-free M. tuberculosis WGS. IMPORTANCE Diagnosis of tuberculosis is effective using molecular methods; however, a comprehensive characterization of the resistance profile of Mycobacterium tuberculosis often requires culturing and phenotypic drug susceptibility testing or culturing followed by whole-genome sequencing (WGS). The phenotypic route can take anywhere from 1 to >3 months to result, by which point the patient may have acquired additional drug resistance. The WGS route is a very attractive option; however, culturing is the rate-limiting step. In this original article, we provide proof-of-principle evidence that microfluidics-based cell capture can be used on high-bacillary-load clinical samples for culture-free WGS.

Rifampicin reduces susceptibility to ofloxacin in rifampicin-resistant Mycobacterium tuberculosis through efflux.

RATIONALE: Central dogma suggests that rifampicin resistance in Mycobacterium tuberculosis develops solely through rpoB gene mutations. OBJECTIVE: To determine whether rifampicin induces efflux pumps activation in rifampicin resistant M. tuberculosis strains thereby defining rifampicin resistance levels and reducing ofloxacin susceptibility. METHODS: Rifampicin and/or ofloxacin minimum inhibitory concentrations (MICs) were determined in rifampicin resistant strains by culture in BACTEC 12B medium. Verapamil and reserpine were included to determine their effect on rifampicin and ofloxacin susceptibility. RT-qPCR was applied to assess expression of efflux pump/transporter genes after rifampicin exposure. To determine whether verapamil could restore susceptibility to first-line drugs, BALB/c mice were infected with a MDR-TB strain and treated with first-line drugs with/without verapamil. MEASUREMENTS AND MAIN FINDINGS: Rifampicin MICs varied independently of rpoB mutation and genetic background. Addition reserpine and verapamil significantly restored rifampicin susceptibility (p = 0.0000). RT-qPCR demonstrated that rifampicin induced differential expression of efflux/transporter genes in MDR-TB isolates. Incubation of rifampicin mono-resistant strains in rifampicin (2 µg/ml) for 7 days induced ofloxacin resistance (MIC > 2 µg/ml) in strains with an rpoB531 mutation. Ofloxacin susceptibility was restored by exposure to efflux pump inhibitors. Studies in BALB/c mice showed that verapamil in combination with first-line drugs significantly reduced pulmonary CFUs after 1 and 2 months treatment (p < 0.05). CONCLUSION: Exposure of rifampicin resistant M. tuberculosis strains to rifampicin can potentially compromise the efficacy of the second-line treatment regimens containing ofloxacin, thereby emphasising the need for rapid diagnostics to guide treatment. Efflux pump inhibitors have the potential to improve the efficacy of anti-tuberculosis drug treatment.

Optimizing liquefaction and decontamination of sputum for DNA extraction from Mycobacterium tuberculosis.

Whole genome sequencing (WGS) can investigate the entire Mycobacterium tuberculosis (Mtb) genome but currently requires large amounts of mycobacterial DNA, necessitating culture. Culture-free Mtb WGS could revolutionize the clinical use of WGS but is hampered by the high viscosity, low mycobacterial load, and high contamination with bacterial and human DNA in sputum samples. To improve the sputum liquefaction and decontamination step prior to DNA extraction, we assessed the efficiency of Myco-TB, MycoPrep, and Sputolysin with/without TiKa-Kic in liquefying and decontaminating sputum and aimed to evaluate the effect of these approaches on mycobacterial viability, and Mtb DNA quality and quantity. Experiments using spiked sputum samples showed that Myco-TB and BD MycoPrep with standard (15 min) or increased (30 min) incubation time, but not reduced (7,5 min) incubation time performed well in liquefying and decontaminating sputum. No difference in DNA quality or quantity, contamination, or the amount of human DNA present was observed. In comparison, Sputolysin with/without TiKa-Kic was less effective for liquefaction and decontamination of sputum. PCR amplification of the human GAPDH gene after sputum treatment, showed the presence of human DNA in all samples, regardless of sputum treatment. Focused efforts are needed to deplete contaminating DNA for culture-free Mtb WGS.

In silico repurposing of a Novobiocin derivative for activity against latency associated Mycobacterium tuberculosis drug target nicotinate-nucleotide adenylyl transferase (Rv2421c).

Nicotinamide-nucleotide adenylyl transferase (Rv2421c) was selected as a potential drug target, because it has been shown, in vitro, to be essential for Mycobacterium tuberculosis growth. It is conserved between mycobacterium species, is up-regulated during dormancy, has a known 3D crystal structure and has no known human homologs. A model of Rv2421c in complex with nicotinic acid adenine dinucleotide and magnesium ion was constructed and subject tovirtual ligand screening against the Prestwick Chemical Library and the ZINC database, which yielded 155 potential hit molecules. Of the 155 compounds identified five were pursued further using an IC50 based 3D-QSAR study. The 3D-QSAR model validated the inhibition properties of the five compounds based on R2 value of 0.895 and Q2 value of 0.944 compared to known inhibitors of Rv2421c. Higher binding affinities was observed for the novel ZINC13544129 and two FDA approved compounds (Novobiocin sodium salt, Sulfasalazine). Similarly, the total interaction energy was found to be the highest for Cromolyn disodium system (-418.88 kJ/mol) followed by Novobiocin (-379.19 kJ/mol) and Sulfasalazine with (-330.13 kJ/mol) compared to substrate DND having (-185.52 kJ/mol). Subsequent in vitro testing of the five compounds identified Novobiocin sodium salt with activity against Mycobacterium tuberculosis at 50 µM, 25µM and weakly at 10µM concentrations. Novobiocin salt interacts with a MG ion and active site residues His20, Thr86, Gly107 and Leu164 similar to substrate DND of Mycobacterium tuberculosis Rv2421c. Additional in silico structural analysis of known Novobiocin sodium salt derivatives against Rv2421c suggest Coumermycin as a promising alternative for the treatment of Mycobacterium tuberculosis based on large number of hydrogen bond interactions with Rv2421c similar in comparison to Novobiocin salt and substrate DND.

Structure based identification of novel inhibitors against ATP synthase of Mycobacterium tuberculosis: A combined in silico and in vitro study.

The shortcomings of conventional tuberculosis treatments resulting from the development of drug resistance in Mycobacterium tuberculosis drive a need for the formulation of novel therapeutic agents. The diarylquinoline class of drugs such as bedaquiline was recently approved for the treatment of multidrug-resistant strains of tuberculosis, primarily targeting c and ε subunits of the ATP synthases. Yet resistance to bedaquiline has already been reported. Therefore, Rv1311 was used as the target for the identification of possible inhibitors against the M. tuberculosis. The structure of Rv1311 was predicted and common feature pharmacophore models were generated which facilitated the identification of potential inhibitors in the ZINC database. The activities of the selected molecules were compared with known inhibitors of the ATP synthase using quantitative structure-activity relationship. The ZINC classified inhibitors showed comparable predicted activities with that of known inhibitors. Furthermore, the inhibitory behavior of the studied drug molecules was experimentally determined using in vitro techniques and showed the minimum inhibitory concentration as low as 25 µM. The resulted outcomes provide a deeper insight into the structural basis of Rv1311 inhibitions and can facilitate the process of drug design against tuberculosis.

Evolution of rifampicin treatment for tuberculosis.

Rifampicin was discovered in 1965 and remains one of the most important drugs in tuberculosis treatment that is valued for its sterilizing activity and ability to shorten treatment. Antimicrobial activity of rifampicin was initially proved in vitro; subsequently numerous in vivo studies showed the bactericidal properties and dose-dependent effect of rifampicin. Rifampicin was first during the late 1960s to treat patients suffering from chronic drug-resistant pulmonary TB. Decades later, rifampicin continues to be studied with particular emphasis on whether higher doses could shorten the duration of treatment without increasing relapse or having adverse effects. Lesion-specific drug penetration and pharmacokinetics of rifampicin are improving our understanding of effective concentration while potentially refining drug regimen designs. Another prospective aspect of high-dose rifampicin is its potential use in treating discrepant mutation thereby eliminating the need for MDR treatment. To date, several clinical trials have shown the safety, efficacy, and tolerability of high-dose rifampicin. Currently, high-dose rifampicin has been used successfully in a routine clinical setting for the treatment of high-risk patients. However, the WHO and other relevant policy makers have not committed to implementing a controlled rollout thereof. This review describes the course that rifampicin has travelled to the present-day exploration of high-dose rifampicin treatment.