HURP wraps microtubule ends with an additional tubulin sheet that has a novel conformation of tubulin.

HURP is a newly discovered microtubule-associated protein (MAP) required for correct spindle formation both in vitro and in vivo. HURP protein is highly charged with few predicted secondary and tertiary folding domains. Here we explore the effect of HURP on pure tubulin, and describe its ability to induce a new conformation of tubulin sheets that wrap around the ends of intact microtubules, thereby forming two concentric tubes. The inner tube is a normal microtubule, while the outer one is a sheet composed of tubulin protofilaments that wind around the inner tube with a 42.5 degrees inclination. We used cryo-electron microscopy and unidirectional surface shadowing to elucidate the structure and conformation of HURP-induced tubulin sheets and their interaction with the inner microtubule. These studies clarified that HURP-induced sheets are composed of anti-parallel protofilaments exhibiting P2 symmetry. HURP is a unique MAP that not only stabilizes and bundles microtubules, but also polymerizes free tubulin into a new configuration.

Identification and structure of a putative Ca2+-binding domain at the C terminus of AQP1.

Aquaporin-1 (AQP1) is the first functionally identified aquaporin of a growing family of membrane water channels found in all forms of life. Recently, a possible secondary function as a cyclic guanosine monophosphate (cGMP) gated ion channel was attributed to AQP1. We have reconstituted purified protein from bovine and human red blood cell membranes into highly ordered 2D crystals. The topography of both AQP1s was determined by electron microscopy from freeze-dried, unidirectionally metal-shadowed 2D crystals as well as from surface topographs of native crystals recorded in buffer solution with the atomic force microscope (AFM). In spite of the high level of sequence homology between bovine and human AQP1, the surfaces showed distinct differences. Alignment of both sequences and comparison of the acquired surface topographies with the atomic model of human AQP1 revealed the topographic changes on the surface of bovine AQP1 to be induced by a few amino acid substitutions. A striking degree of sequence homology was found between the carboxyl-terminal domains of AQP1s from different organisms and EF-hands from Ca2+-binding proteins belonging to the calmodulin superfamily, suggesting the existence of a Ca2+-binding site at the C terminus of AQP1 instead of the putative cGMP-binding site reported previously. To unveil its position on the acquired surface topographies, 2D crystals of AQP1 were digested with carboxypeptidase Y, which cleaves off the intracellular C terminus. Difference maps of AFM topographs between the native and the peptidase-treated AQP1s showed the carboxylic tail to be close to the 4-fold symmetry axis of the tetramer. SDS-PAGE and matrix-assisted laser desorption/ionisation mass spectrometry of native and decarboxylated bovine and human AQP1 revealed that the EF-hand motif found at the C terminus of AQP1 was partially resistant to peptidase digestion. The importance of the C-terminal domain is implicated by structural instability of decarboxylated AQP1. A possible role of the C terminus and calcium in translocation of AQP1 in cholangiocytes from intracellular vesicles to the plasma membrane and in triggering its fusion is discussed. Functional studies are now required to identify the physiological role of the Ca2+-binding site.

A structural analysis of the interaction between ncd tail and tubulin protofilaments.

ncd is a minus-end directed, kinesin-like motor, which binds to microtubules with its motor domain and its cargo domain as well. Typical of retrograde motors, the motor domain of ncd locates to the C-terminal end of the polypeptide chain, and hence, the cargo domain constitutes the N-terminal region. To date, several studies have investigated the interaction properties of the motor domain with microtubules, but very few structural data are available about the tail itself or its interaction with microtubules as cargo. Here, we applied cryo-electron microscopy and helical 3D image reconstruction to 15 protofilament microtubules decorated with an ncd tail fragment (N-terminal residues 83-187, named NT6). In our study, the ncd tail shows a behaviour resembling filamentous MAPs such as tau protein, exhibiting a highly flexible structure with no large globular domains. NT6 binds to four different sites on the outer side of microtubules within the proximity of the kinesin motor-binding site. Two of these sites locate within the groove between two neighbouring protofilaments, and appear as strong binding sites, while the other two sites, located at the outer rim, appear to play a secondary role. In addition, the ncd tail fragment induces the formation of large protofilament sheets, suggesting a tail-induced modification of lateral protofilament contacts.

Surface-decoration of microtubules by human tau.

Tau is a neuronal, microtubule-associated protein that stabilizes microtubules and promotes neurite outgrowth. Tau is largely unfolded in solution and presumably forms mostly random coil. Because of its hydrophilic nature and flexible structure, tau complexed to microtubules is largely invisible by standard electron microscopy methods. We applied a combination of high-resolution metal-shadowing and cryo-electron microscopy to study the interactions between tau and microtubules. We used recombinant tau variants with different domain compositions, (1) full length tau, (2) the repeat domain that mediates microtubule binding (K19), and (3) two GFP-tau fusion proteins that contain a globular marker (GFP) attached to full-length tau at either end. All of these constructs bind exclusively to the outside of microtubules. Most of the tau-related mass appears randomly distributed, creating a "halo" of low-density mass spread across the microtubule surface. Only a small fraction of tau creates a periodic signal at an 8 nm interval, centered on alpha-tubulin subunits. Our data suggest that tau retains most of its disordered structure even when bound to the microtubule surface. Hence, it binds along, as well as across protofilaments. Nevertheless, even minute concentrations of tau have a strong stabilizing effect and effectively scavenge unpolymerized tubulin.

Structural investigations into microtubule-MAP complexes.

Microtubules interact with a large variety of factors commonly referred to as either molecular motors (kinesins, dyneins) or structural microtubule-associated proteins (MAPs). MAPs do not exhibit motor activity, but regulate microtubule dynamics and their interactions with molecular motors, and organelles such as kinetochores or centrosomes. Structural investigations into microtubule-kinesin motor complexes are quite advanced today and by helical three-dimensional (3-D) analysis reveal a resolution of the motor-tubulin interface at <1.0 nm. However, due to their flexible structure MAPs like tau or MAP2C cannot be visualized in the same straightforward manner. Helical averaging usually reveals only the location of strong binding sites while the overall structure of the MAP remains unsolved. Other MAPs such as EB1 bind very selectively only to some parts of the microtubule lattice such as the lattice seam. Thus, they do not reveal a stoichiometric tubulin:MAP-binding ratio that would allow for a quantitative helical 3-D analysis. Therefore, to get a better view on the structure of microtubule-MAP complexes we often used a strategy that combined cryo-electron microscopy and helical or tomographic 3-D analysis with freeze-drying and high-resolution unidirectional surface shadowing. 3-D analysis of ice-embedded specimens reveals their full 3-D volume. This relies either on a repetitive structure following a helical symmetry that can be used for averaging or suffers from the limited resolution that is currently achievable with cryotomography. Surface metal shadowing exclusively images surface-exposed features at very high contrast, adding highly valuable information to 2-D or 3-D data of vitrified structures.

Atomic models of de novo designed cc beta-Met amyloid-like fibrils.

The common characteristics of amyloid and amyloid-like fibrils from disease- and non-disease-associated proteins offer the prospect that well-defined model systems can be used to systematically dissect the driving forces of amyloid formation. We recently reported the de novo designed cc beta peptide model system that forms a native-like coiled-coil structure at low temperatures and which can be switched to amyloid-like fibrils by increasing the temperature. Here, we report a detailed molecular description of the system in its fibrillar state by characterizing the cc beta-Met variant using several microscopic techniques, circular dichroism spectroscopy, X-ray fiber diffraction, solid-state nuclear magnetic resonance, and molecular dynamics calculations. We show that cc beta-Met forms amyloid-like fibrils of different morphologies on both the macroscopic and atomic levels, which can be controlled by variations of assembly conditions. Interestingly, heterogeneity is also observed along single fibrils. We propose atomic models of the cc beta-Met amyloid-like fibril, which are in good agreement with all experimental data. The models provide a rational explanation why oxidation of methionine residues completely abolishes cc beta-Met amyloid fibril formation, indicating that a small number of site-specific hydrophobic interactions can play a major role in the packing of polypeptide-chain segments within amyloid fibrils. The detailed structural information available for the cc beta model system provides a strong molecular basis for understanding the influence and relative contribution of hydrophobic interactions on native-state stability, kinetics of fibril formation, fibril packing, and polymorphism.

The Schizosaccharomyces pombe EB1 homolog Mal3p binds and stabilizes the microtubule lattice seam.

End binding 1 (EB1) proteins are highly conserved regulators of microtubule dynamics. Using electron microscopy (EM) and high-resolution surface shadowing we have studied the microtubule-binding properties of the fission yeast EB1 homolog Mal3p. This allowed for a direct visualization of Mal3p bound on the surface of microtubules. Mal3p particles usually formed a single line on each microtubule along just one of the multiple grooves that are formed by adjacent protofilaments. We provide structural data showing that the alignment of Mal3p molecules coincides with the microtubule lattice seam as well as data suggesting that Mal3p not only binds but also stabilizes this seam. Accordingly, Mal3p stabilizes microtubules through a specific interaction with what is potentially the weakest part of the microtubule in a way not previously demonstrated. Our findings further suggest that microtubules exhibit two distinct reaction platforms on their surface that can independently interact with target structures such as microtubule-associated proteins, motors, kinetochores, or membranes.

Structural analysis of the ZEN-4/CeMKLP1 motor domain and its interaction with microtubules.

The centralspindlin complex is required for the assembly and maintenance of the central spindle during late anaphase and the completion of cytokinesis. It is composed of two copies each of the kinesin-like protein ZEN-4, a Caenorhabditis elegans MKLP-1 (Kinesin-6 family), and the RhoGAP CYK-4. By using cryo-electron microscopy and helical 3D reconstruction, we are investigating the structural features of the interactions between monomeric and dimeric motor domain constructs of ZEN-4 and microtubules. We have calculated helically averaged 3D maps of microtubules decorated with ZEN-4 motor domain in the presence of AMP-PNP, ADP, ADP-AlF(4)(-), and nucleotide-free conditions. We used statistical difference mapping to compare these maps among each other and to related maps obtained from microtubules decorated with a well-characterized Kinesin-1 motor domain from Neurospora crassa. Thereby, we found distinct structural features in microtubule-ZEN-4 complexes that may directly relate to the functional properties of ZEN-4 and centralspindlin. Furthermore, we investigated the location, structure, and function of a highly conserved extension of approximately 50 residues unique to the Kinesin-6 subfamily, located in the motor core loop6/beta4 region.

A structural model for monastrol inhibition of dimeric kinesin Eg5.

Eg5 or KSP is a homotetrameric Kinesin-5 involved in centrosome separation and assembly of the bipolar mitotic spindle. Analytical gel filtration of purified protein and cryo-electron microscopy (cryo-EM) of unidirectional shadowed microtubule-Eg5 complexes have been used to identify the stable dimer Eg5-513. The motility assays show that Eg5-513 promotes robust plus-end-directed microtubule gliding at a rate similar to that of homotetrameric Eg5 in vitro. Eg5-513 exhibits slow ATP turnover, high affinity for ATP, and a weakened affinity for microtubules when compared to monomeric Eg5. We show here that the Eg5-513 dimer binds microtubules with both heads to two adjacent tubulin heterodimers along the same microtubule protofilament. Under all nucleotide conditions tested, there were no visible structural changes in the monomeric Eg5-microtubule complexes with monastrol treatment. In contrast, there was a substantial monastrol effect on dimeric Eg5-513, which reduced microtubule lattice decoration. Comparisons between the X-ray structures of Eg5-ADP and Eg5-ADP-monastrol with rat kinesin-ADP after docking them into cryo-EM 3-D scaffolds revealed structural evidence for the weaker microtubule-Eg5 interaction in the presence of monastrol.

Nucleotide-induced conformations in the neck region of dimeric kinesin.

The neck region of kinesin constitutes a key component in the enzyme's walking mechanism. Here we applied cryoelectron microscopy and image reconstruction to investigate the location of the kinesin neck in dimeric and monomeric constructs complexed to microtubules. To this end we enhanced the visibility of this region by engineering an SH3 domain into the transition between neck linker and neck coiled coil. The resulting chimeric kinesin constructs remained functional as verified by physiology assays. In the presence of AMP-PNP the SH3 domains allowed us to identify the position of the neck in a well defined conformation and revealed its high flexibility in the absence of nucleotide. We show here the double-headed binding of dimeric kinesin along the same protofilament, which is characterized by the opposite directionality of neck linkers. In this configuration the neck coiled coil appears fully zipped. The position of the neck region in dimeric constructs is not affected by the presence of the tubulin C-termini as confirmed by subtilisin treatment of microtubules prior to motor decoration.