Multilayer buildup and biofouling characteristics of PSS-b-PEG containing films.

Thin films exhibiting protein resistance are of interest in diverse areas, ranging from low fouling surfaces in biomedicine to marine applications. Herein, we report the preparation of low protein and cell binding multilayer thin films, formed by the alternate deposition of a block copolymer comprising polystyrene sulfonate and poly(poly(ethylene glycol) methyl ether acrylate) (PSS-b-PEG), and polyallylamine hydrochloride (PAH). Film buildup was followed by quartz crystal microgravimetry (QCM), which showed linear growth and a high degree of hydration of the PSS-b-PEG/PAH films. Protein adsorption studies with bovine serum albumin using QCM demonstrated that multilayer films of PSS/PAH with a terminal layer of PSS-b-PEG were up to 5-fold more protein resistant than PSS-terminated films. Protein binding was dependent on the ionic strength at which the terminal layer of PSS-b-PEG was adsorbed, as well as the pH of the protein solution. It was also possible to control the protein resistance of the films by coadsorption of the final layer with another component (PSS), which showed an increase in protein resistance as the proportion of PSS-b-PEG in the adsorption solution was increased. In addition, protein resistance could also be controlled by the location of a single PSS-b-PEG layer within a PSS/PAH film. Finally, the buildup of PSS-b-PEG/PAH films on colloidal particles was demonstrated. PSS-b-PEG-terminated particles exhibited a 6.5-fold enhancement in cell binding resistance compared with PSS-terminated particles. The stability of PSS-b-PEG films combined with their low protein and cell binding characteristics provide opportunities for the use of the films as low fouling coatings in devices and other surfaces requiring limited interaction with biological interfaces.

Time-dependent polymerization kinetic study and the properties of hybrid polymers with functional silsesquioxanes.

Methacrylate-functionalized cubic silsesquioxane homopolymers [p(MA-CSSQ)] were synthesized by reversible addition-fragmentation chain transfer (RAFT)-mediated living radical polymerization in the presence of dodecyl(dimethylacetic acid)trithiocarbonate (DDTA) chain transfer agent, and their polymerization kinetics were studied. The DDTA-terminated p(MA-CSSQ) was then employed as a macro-RAFT agent in the polymerization of methylmethacrylate (MMA) for the synthesis of a brushlike p(MA-CSSQ)-b-PMMA block copolymer. The kinetics study of p(MA-CSSQ) showed that the monomer to polymer conversion, evaluated by (1)H NMR, was found to be approximately 80% with the maximum number average molecular weight (M(n)) of 24000 and 32300 Da, for the [MA-CSSQ]/[DDTA] ratios of 100 and 200, respectively, as determined by gel permeation chromatography (GPC). The broadening of molecular weight distributions in p(MA-CSSQ) homopolymer GPC traces was observed, presumably due to the presence of the radical-radical termination products. The resultant homopolymer and block copolymer exhibited excellent thermal stability as evidenced by thermogravimetric and differential scanning calorimetric analyses. The surface properties of p(MA-CSSQ) homopolymer and p(MA-CSSQ)-b-PMMA block copolymer, determined by water contact angle and atomic force microscopy (AFM) measurements, strongly indicated the surface enrichment of the hydrophobic silsesquioxane groups. The AFM images showed the microsized granular domains of p(MA-CSSQ) homopolymer, whereas the islandlike phase-separated domains were observed in p(MA-CSSQ)-b-PMMA block copolymer.

Self-assembly of block copolymer micelles: synthesis via reversible addition-fragmentation chain transfer polymerization and aqueous solution properties.

Poly(hexafluorobutyl methacrylate) (PHFBMA) homopolymer was synthesized by reversible addition-fragmentation chain transfer (RAFT)-mediated living radical polymerization in the presence of cyano-2-propyl dithiobenzoate (CPDB) RAFT agent. A block copolymer of PHFBMA-poly(propylene glycol acrylate) (PHFBMA-b-PPGA) with dangling poly(propylene glycol) (PPG) side chains was then synthesized by using CPDB-terminated PHFBMA as a macro-RAFT agent. The amphiphilic properties and self-assembly of PHFBMA-b-PPGA block copolymer in aqueous solution were investigated by dynamic and static light scattering (DLS and SLS) studies, in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). Although PPG shows moderately hydrophilic character, the formation of nanosize polymeric micelles was confirmed by fluorescence and TEM studies. The low value of the critical aggregation concentration exhibited that the tendency for the formation of copolymer aggregates in aqueous solution was very high due to the strong hydrophobicity of the PHFBMA(145)-b-PPGA(33) block copolymer. The combination of DLS and SLS measurements revealed the existence of micellar aggregates in aqueous solution with an association number of approximately 40 +/- 7 for block copolymer micelles. It was also found in TEM observation that there are 40-50 micelles accumulated into one aggregate and these micelles are loosely packed inside the aggregate.

Synthesis and Self-Assembly of pH-Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)-block-Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution.

We report the synthesis of a novel pH-responsive amphiphilic block copolymer poly(dimethylaminoethyl methacrylate)-block-poly(pentafluorostyrene) (PDMAEMA-b-PPFS) using RAFT-mediated living radical polymerization. Copolymer micelle formation, in aqueous solution, was investigated using fluorescence spectroscopy, static and dynamic light scattering (SLS and DLS), and transmission electron microscopy (TEM). DLS and SLS measurements revealed that the diblock copolymers form spherical micelles with large aggregation numbers, N(agg) ≈ 30 where the dense PPFS core is surrounded by dangling PDMAEMA chains as the micelle corona. The hydrodynamic radii, R(h) of these micelles is large, at pH 2-5 as the protonated PDMAEMA segments swell the micelle corona. Above pH 5, the PDMAEMA segments are gradually deprotonated, resulting in a lower osmotic pressure and enhanced hydrophobicity within the micelle, thus decreasing the R(h) . However, the radius of gyration, R(g) remains independent of pH as the dense PPFS cores predominate.

The antifouling and fouling-release performance of hyperbranched fluoropolymer (HBFP)-poly(ethylene glycol) (PEG) composite coatings evaluated by adsorption of biomacromolecules and the green fouling alga Ulva.

Cross-linked hyperbranched fluoropolymer (HBFP) and poly(ethylene glycol) (PEG) amphiphilic networks with PEG weight percentages of 14% (HBFP-PEG14), 29% (HBFP-PEG29), 45% (HBFP-PEG45), and 55% (HBFP-PEG55) were prepared on 3-aminopropyl)triethoxysilane (3-APS) functionalized microscope glass slides for marine antifouling and fouling-release applications. The surface-free energies (gamma(s)), polar (gamma(s)(p) and gamma(s)(AB)), and dispersion (gamma(s)(d) and gamma(s)(LW)) components were evaluated using advancing contact angles by two-liquid geometric-mean and three-liquid Lifshitz-van der Waals acid-base approaches. The HBFP coating exhibited a low surface energy of 22 mJ/m(2), while the gamma(s) and gamma(s)(p) of the cross-linked HBFP-PEG coatings increased proportionally with the PEG weight percentages in the networks. The adsorption of bovine serum albumin (BSA), lectin from Codium fragile (CFL), lipopolysaccharides from Escherichia coli (LPSE) and Salmonella minnesota (LPSS) upon glass, APS-glass, HBFP, PEG, and the cross-linked HBFP-PEG network coatings were investigated by fluorescence microscopy. The marine antifouling and fouling-release properties of the cross-linked HBFP-PEG coatings were evaluated by settlement and release assays involving zoospores of green fouling alga Ulva (syn. Enteromorpha; Hayden, H. S.; Blomster, J.; Maggs, C. A.; Silva, P. C.; Stanhope, M. J.; Waaland, J. R. Eur. J. Phycol. 2003, 38, 277). The growth and release of Ulva sporelings were also investigated upon the HBFP-PEG45 coating in comparison to a poly(dimethylsiloxane) elastomer (PDMSE) standard material. Of the heterogeneous cross-linked network coatings, the maximum resistances to protein, lipopolysaccharide, and Ulva zoospore adhesion, as well as the best zoospore and sporeling release properties, were recorded for the HBFP-PEG45 coating. This material also exhibited better performance than did a standard PDMSE coating, suggesting its unique applicability in fouling-resistance applications.