Hydrogen Bonded Dimer of an Alcohol with the Derived Carboxylic Acid Triggering their Sorption by Nanoporous-crystalline PPO Films.

Films exhibiting nanoporous-crystalline (NC) phases of poly(2,6-dimethyl-1,4-phenylene) oxide (PPO), which are highly effective to absorb apolar organic guest molecules, are also able to absorb polar molecules (like alcohols and carboxylic acids) but only from concentrated organic solutions. NC PPO films, which do not absorb alcohols and carboxylic acids from diluted aqueous solutions, exhibits a huge uptake (even above 30 wt %) of benzyl alcohol (BAL) and benzoic acid (BA), if BA is obtained by spontaneous room temperature oxidation of BAL in aqueous solution. This phenomenon is rationalized by an easy uptake, mainly by the PPO intrahelical crystalline empty channels, of a BAL/BA 1/1 hydrogen-bonded dimer. This huge uptake of BAL/BA dimer by NC PPO films, which is also fast for films exhibiting the orientation of the crystalline helices perpendicular to the film plane (c⊥ orientation), can be exploited for purification of water from BAL, when present in traces. High and fast sorption of a hydrogen bonded dimer and negligible sorption of the two separate compounds is possibly unprecedented for absorbent materials.

Salicylic Acid Release from Syndiotactic Polystyrene Staple Fibers.

Films and fibers of syndiotactic polystyrene (sPS), being amorphous or exhibiting nanoporous crystalline (NC) or dense crystalline phases, were loaded with salicylic acid (SA), a relevant non-volatile antimicrobial molecule. In the first section of the paper, sPS/SA co-crystalline (CC) δ form is characterized, mainly by wide angle X-ray diffraction (WAXD) patterns and polarized Fourier transform infrared (FTIR) spectra. The formation of sPS/SA δ CC phases allows the preparation of sPS fibers even with a high content of the antibacterial guest, which is also retained after repeated washing procedures at 65 °C. A preparation procedure starting from amorphous fibers is particularly appropriate because involves a direct formation of the CC δ form and a simultaneous axial orientation. The possibility of tuning drug amount and release kinetics, by simply selecting suitable crystalline phases of a commercially available polymer, makes sPS fibers possibly useful for many applications. In particular, fibers with δ CC forms, which retain SA molecules in their crystalline phases, could be useful for antimicrobial textiles and fabrics. Fibers with the dense γ form which easily release SA molecules, because they are only included in their amorphous phases, could be used for promising SA-based preparations for antibacterial purposes in food processing and preservation and public health. Finally, using a cell-based assay system and antibacterial tests, we investigated the cellular activity, toxicity and antimicrobial properties of amorphous, δ CC forms and dense γ form of sPS fibers loaded with different contents of SA.

Nanoporous Crystalline Composite Aerogels with Reduced Graphene Oxide.

High-porosity monolithic composite aerogels of syndiotactic polystyrene (sPS) and poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) containing reduced graphene oxide (r-GO) were prepared and characterized. The composite aerogels obtained by supercritical carbon dioxide (scCO2) extraction of sPS/r-GO and PPO/r-GO gels were characterized by a fibrillar morphology, which ensured good handling properties. The polymer nanoporous crystalline phases obtained within the aerogels led to high surface areas with values up to 440 m2 g-1. The role of r-GO in aerogels was studied in terms of catalytic activity by exploring the oxidation capacity of composite PPO and sPS aerogels toward benzyl alcohol in diluted aqueous solutions. The results showed that, unlike sPS/r-GO aerogels, PPO/r-GO aerogels were capable of absorbing benzyl alcohol from the diluted solutions, and that oxidation of c.a. 50% of the sorbed benzyl alcohol molecules into benzoic acid occurred.

Edge-Oxidation of Graphites by Hydrogen Peroxide.

A simple and eco-friendly procedure of edge oxidation of high-surface area graphites, based on hydrogen peroxide treatments at 60 °C, is presented. Already, short-term treatments lead to O/C weight ratios higher than 0.1, leaving unaltered interlayer spacing and correlation length. This clearly indicates that all oxidized groups are located on exposed sites (mainly on lateral edges) of the graphitic layers. Short-term H2O2 treatments, as expected, increase hydrophilicity and reduce thermal stability with respect to the starting graphite. Long-term treatments, on the contrary, reduce hydrophilicity and increase thermal stability with respect to the starting graphite, mainly due to surface area reduction associated with the oxidation procedure. Exfoliation of a substantial fraction of the obtained edge-oxidized graphite can be achieved by simple procedures of dispersion and sonication in water.

Green and Facile Esterification Procedure Leading to Crystalline-Functionalized Graphite Oxide.

A simple and eco-friendly procedure of esterification of graphite oxide (GO), which uses acetic anhydride as a model reagent and ethyl acetate as a green solvent, is reported. The procedure leads to high functionalization degrees (at least up to 4.5 mol % of acetyl groups, referred to as graphitic C atoms) and it is much more effective than the literature method based on pure acetic anhydride. Surprisingly, our acetylation procedure does not destroy or reduce GO crystallinity but, irrespective of a substantial increase of distance between GO layers (from 0.84 nm up to 0.95 nm), leads to an increased order in the direction perpendicular to the graphitic planes. This phenomenon indicates that acetyl groups of acetylated GO (AcGO) are easily accommodated between graphitic layers, even improving interlayer order. The esterification procedure is generally applicable with various anhydrides providing differently functionalized graphite oxide. Dispersion of crystalline functionalized GO in volatile organic solvents followed by solvent fast removal, can easily lead to complete exfoliation.

Intense Chiral Optical Phenomena in Racemic Polymers by Cocrystallization With Chiral Guest Molecules: A Brief Overview.

This review is devoted to the chiral optical behavior of films of racemic polymers whose chirality is induced by cocrystallization with nonracemic (also temporary) guest molecules. We provide examples of macromolecular amplification of chirality, produced by molecular and supramolecular mechanisms, on industrially relevant polymers like poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) and syndiotactic polystyrene (s-PS).

Solid-State Reaction of Alkylamines with CO2 in Ambient Air.

This paper explores possible procedures to accelerate CO2 capture from ambient air by a crystalline alkylamine surfactant (octadecylamine), leading to the corresponding crystalline ammonium-carbamate. Conversion of the amine to the carbamate, in different conditions, is studied by four different techniques: WAXD, FTIR, TGA, and DSC. The WAXD study also gives relevant information on the crystal structures of both amine and derived carbamate. Kinetics of reactions of the crystalline amine are mainly studied by DSC scans, by evaluating melting enthalpies of residual amine. The kinetics of conversion of the amine in ambient CO2 is strongly accelerated by ball milling with full conversion achieved after only 4 h, while the reaction kinetics of amine powder simply exposed to ambient CO2 is complete only after nearly 103 h. A substantial increase in kinetics of the solid-state amine reaction with ambient CO2 can be also achieved by increasing the temperature up to 50 °C, i. e. at a temperature slightly lower than amine melting. However, the time for full conversion remains much higher than for room-temperature ball-milled amine (roughly 102 h vs 4 h). Hence, suitable ball-milling procedures can lead to complete and relatively fast conversion of the crystalline amine to the crystalline ammonium-carbamate, even with ambient CO2.

Monolithic nanoporous crystalline aerogels.

Monolithic aerogels can be easily obtained by drying physical gels formed by linear uncross-linked polymers. Preparation methods, structure, and properties of these physically cross-linked polymeric aerogels are reviewed, with particular emphasis to those whose cross-linking knots are crystallites and, more in particular, crystallites exhibiting nanoporous-crystalline forms. The latter aerogels present beside disordered amorphous micropores (typical of all aerogels) also all identical nanopores of the crystalline phases. Their outstanding guest transport properties combined with low material cost, robustness, durability, and ease of handling and recycle make these aerogels suitable for applications in chemical separations, purification, and storage as well as in biomedicine. Scientific, technological, and industrial perspectives for monolithic nanoporous-crystalline polymeric aerogels are also discussed.

Segregation of Benzoic Acid in Polymer Crystalline Cavities.

Benzoic acid (BA) and its derivatives are very attractive because of their pharmacological properties, such as antioxidant, radical-regulating, antiviral, antitumor, anti-inflammatory, antimicrobial and antifungal. Syndiotactic polystyrene (sPS) and poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) films exhibiting co-crystalline phases with BA were prepared and characterized by WAXD, FTIR and polarized FTIR measurements. The FTIR measurements clearly showed that BA was present mainly as a dimer in the crystalline channels of the ε form of sPS as well as in the α form of PPO, as generally occurs not only in the solid state but also in organic dilute solutions. BA was instead present as isolated molecules in the crystalline cavities of the δ form of sPS. In fact, the FTIR spectra of BA guest molecules exhibited vibrational peaks close to those of BA in its vapor phase. Hence, the nanoporous-crystalline δ form of sPS not only avoids additive aggregation but also leads to the separation of dimeric molecules and the segregation of monomeric BA.

Chiral optical films based on achiral chromophore guests.

Films constituted by an achiral host polymer and an achiral guest chromophore, which exhibit intense chiral optical responses for both host and guest peaks in the infrared as well as in the UV-visible regions, have been obtained. Such films can have any thickness from the nanoscale up to the macroscopic scale. This unexpected chiral optical behavior is easily achieved by crystallization of a robust commercial stereoregular host polymer (syndiotactic polystyrene, s-PS) from the amorphous phase as induced by a nonracemic guest, followed by exchange of the nonracemic guest with the achiral guest, leading to the formation of polymer-host/chromophore-guest cocrystalline phases. This finding opens the possibility to achieve s-PS-based films with chiral optical response at selected wavelengths. It has been also found that the chiral optical cocrystalline phase of s-PS with azulene exhibits a monoclinic δ-clathrate form with equal proportions of left- and right-handed helices. This confirms that the observed chiral optical behavior arises by the nonracemic native morphology of the crystalline regions, which has been induced by the temporary nonracemic guest.

c-Perpendicular Orientation of Poly(ʟ-lactide) Films.

Poly(ʟ-lactide) (PLLA) films, even of high thickness, exhibiting co-crystalline and crystalline α phases with their chain axes preferentially perpendicular to the film plane (c⊥ orientation) have been obtained. This c⊥ orientation, unprecedented for PLLA films, can be achieved by the crystallization of amorphous films as induced by low-temperature sorption of molecules being suitable as guests of PLLA co-crystalline forms, such as N,N-dimethylformamide, cyclopentanone or 1,3-dioxolane. This kind of orientation is shown and quantified by two-dimensional wide-angle X-ray diffraction (2D-WAXD) patterns, as taken with the X-ray beam parallel to the film plane (EDGE patterns), which present all the hk0 arcs centered on the meridian. PLLA α-form films, as obtained by low-temperature guest-induced crystallization, also exhibit high transparency, being not far from those of the starting amorphous films.

Monomeric and Dimeric Carboxylic Acid in Crystalline Cavities and Channels of Delta and Epsilon Forms of Syndiotactic Polystyrene.

Delta (δ) and epsilon (ε) co-crystalline forms of syndiotactic polystyrene with a carboxylic acid guest were obtained by sorption of liquid hexanoic acid in syndiotactic polystyrene films exhibiting delta and epsilon nanoporous-crystalline forms. The characterization study is facilitated by axially stretched syndiotactic polystyrene films, used both for polarized FTIR spectra and for WAXD fiber patterns. Particularly informative are two carbonyl-stretching FTIR peaks, attributed to monomeric and dimeric hexanoic acid. The dichroism of these carbonyl peaks indicates that both delta and epsilon phases are able to include hexanoic acid as isolated guest molecules, while only the epsilon phase is also able to include dimeric hexanoic acid molecules in its crystalline channels. The inclusion of both isolated and dimeric hexanoic acid species in the epsilon form crystalline channels produces extremely fast hexanoic acid uptakes by syndiotactic polystyrene epsilon form films.

Dependence on Film Thickness of Guest-Induced c Perpendicular Orientation in PPO Films.

For poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) films exhibiting nanoporous-crystalline (NC) phases, c⟂ orientation (i.e., crystalline polymer chain axes being preferentially perpendicular to the film plane) is obtained by crystallization of amorphous films, as induced by sorption of suitable low-molecular-mass guest molecules. The occurrence of c⟂ orientation is relevant for applications of NC PPO films because it markedly increases film transparency as well as guest diffusivity. Surprisingly, we show that the known crystallization procedures lead to c⟂ oriented thick (50-300 µm) films and to unoriented thin (≤20 µm) films. This absence of crystalline phase orientation for thin films is rationalized by fast guest sorption kinetics, which avoid co-crystallization in confined spaces and hence inhibit formation of flat-on lamellae. For thick films exhibiting c⟂ orientation, sigmoid kinetics of guest sorption and of thickening of PPO films are observed, with inflection points associated with guest-induced film plasticization. Corresponding crystallization kinetics are linear with time and show that co-crystal growth is poorly affected by film plasticization. An additional relevant result of this study is the linear relationship between WAXD crystallinity index and DSC melting enthalpy, which allows evaluation of melting enthalpy of the NC α form of PPO (ΔHmο = 42 ± 2 J/g).

Molecular Features Behind Formation of α or ß Co-Crystalline and Nanoporous-Crystalline Phases of PPO.

Guest molecular features determining the formation of α and ß phases of poly(2-6-dimethyl-1,4-phenylene) oxide (PPO) are explored by collecting literature data and adding many new film preparations, both by solution casting and by guest sorption in amorphous films. Independently of the considered preparation method, the α-form is favored by the hydrophobic and bulky guest molecules, while the hydrophilic and small guest molecules favor the ß-form. Furthermore, molecular modeling studies indicate that the ß-form inducer guests establish stronger dispersive interactions with the PPO units than the α-form inducer guests. Thus, the achievement of co-crystalline (and derived nanoporous crystalline) α- and ß-forms would result from differences in energy gain due to the host-guest interactions established at the local scale.

Storage of hydrogen as a guest of a nanoporous polymeric crystalline phase.

A mechanism of H(2) uptake, based on adsorption in the ordered cavities of nanoporous polymeric crystalline phases rather than on disordered amorphous polymeric surfaces, has been clearly established, for aerogels of syndiotactic polystyrene (s-PS) exhibiting the nanoporous δ phase. An ordered arrangement of the H(2) molecules is proven by FTIR spectra while the inclusion of H(2) is assessed by gravimetric measurements and molecular simulations.

Induced vibrational circular dichroism and polymorphism of syndiotactic polystyrene.

The intense circular dichroism (CD) phenomena, as induced in amorphous samples of syndiotactic polystyrene (s-PS) by cocrystallization with nonracemic volatile guest molecules (carvone and limonene), have been investigated by Vibrational Circular Dichroism (VCD) measurements and X-ray diffraction characterizations. Moreover, the stability of these CD phenomena after thermal and solvent treatments, leading to different polymorphic crystalline phases of s-PS, has been studied. The CD phenomena remain stable not only after guest extraction but also after thermal annealing procedures leading to the helical γ phase or to the transplanar α phase. The CD phenomena are instead reduced for the solvent treatments involving at least partial dissolution and crystallization that lead to the helical ε phases and even lost for thermal treatments involving melting and crystallization that lead to the ß phase. The reported results indicate that the intense CD phenomena observed for s-PS films are due to a supramolecular chirality associated with the native cocrystal morphology.

Axial Orientation of Co-Crystalline Phases of Poly(2,6-Dimethyl-1,4-Phenylene)Oxide Films.

Films exhibiting co-crystalline (CC) phases between a polymer host and low-molecular-mass guest molecules are relevant for many applications. As is usual for semi-crystalline polymers, axially oriented films can give relevant information on the crystalline structure, both by Wide Angle X-ray diffraction fiber patterns and by polarized Fourier-transform infrared spectroscopy. Axially oriented CC phases of poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) with 1,3,5-trimethylbenzene (mesitylene) can be simply obtained by the stretching of CC PPO films. In fact, due to the plasticization effect of this highly boiling guest, PPO orientation can occur in a stretching temperature range (170-175 °C) nearly 50 °C lower than that generally needed for PPO films (220-230 °C). This low stretching temperature range allows avoidance of polymer oxidation, as well as formation of the mesomorphic dense γ PPO phase. Axially oriented CC phases of PPO with toluene, i.e., with a more volatile guest, can be instead obtained by the stretching (in the same low temperature range: 170-175 °C) of CC PPO blend films with polystyrene.

Normal vibrational analysis of the syndiotactic polystyrene s(2/1)2 helix.

The full vibrational spectra of the gamma, delta, and epsilon crystalline phases of syndiotactic polystyrene (sPS), i.e., phases presenting the s(2/1)2 helical conformation, have been experimentally determined and compared with that calculated at the B3LYP/6-31G(d,p) level of theory for an infinite helix. The assignment of the different modes was highly facilitated and validated by the experimental evaluation of the direction of the transition moment vector of most IR peaks, which was made possible for the first time by measurements on sPS films with different uniplanar orientations of the crystalline phase. The normal vibration analysis of most representative modes of the periodic model allowed for a general description of each one to be obtained, which was further confirmed by the direct inspection of mode animations.

Molecular sensing by nanoporous crystalline polymers.

Chemical sensors are generally based on the integration of suitable sensitive layers and transducing mechanisms. Although inorganic porous materials can be effective, there is significant interest in the use of polymeric materials because of their easy fabrication process, lower costs and mechanical flexibility. However, porous polymeric absorbents are generally amorphous and hence present poor molecular selectivity and undesired changes of mechanical properties as a consequence of large analyte uptake. In this contribution the structure, properties and some possible applications of sensing polymeric films based on nanoporous crystalline phases, which exhibit all identical nanopores, will be reviewed. The main advantages of crystalline nanoporous polymeric materials with respect to their amorphous counterparts are, besides a higher selectivity, the ability to maintain their physical state as well as geometry, even after large guest uptake (up to 10-15 wt%), and the possibility to control guest diffusivity by controlling the orientation of the host polymeric crystalline phase. The final section of the review also describes the ability of suitable polymeric films to act as chirality sensors, i.e., to sense and memorize the presence of non-racemic volatile organic compounds.

Intercalation compounds of a smectite clay with an ammonium salt biocide and their possible use for conservation of cultural heritage.

Ordered intercalation compounds between a smectite mineral clay (montmorillonite, Mt) and the ammonium salt mainly used for stone material disinfection procedures (i.e. N-Alkyl-N-benzyl-N,N-dimethylammonium chloride, shortly known as benzalkonium chloride, BAC), leading to an increase of interlayer distance from 1.3 nm up to 3.4 nm, have been prepared. The used clay/ammonium salt ratios are close to (or higher than) those often used for stone materials disinfection procedures for the conservation in cultural heritage. The prepared intercalated compounds have been studied as for their possible cation release in suitable aqueous media. Mt/BAC intercalate compounds are able to release only a fraction (if any) of the intercalated cations, eventually leading to a stable intermediate intercalate structure with interlayer distance not far from 1.9 nm, with a Mt/BAC ratio roughly equal to 4/1. The overall results indicate that Mt/BAC intercalates are possibly suitable for biocide applications in stone conservation procedures requiring both fast antimicrobial release and long-term biostatic effect.