RESUMO
OBJECTIVE: Assess the effects of activated charcoal-based products on whitening and changes on dental enamel surface. MATERIAL AND METHODS: Fifty-two blocks of bovine dental enamel were randomly distributed in four groups (n = 13): brushing with activated charcoal-based powder (PW); brushing with activated charcoal-based dentifrice (AC); brushing with a conventional dentifrice containing 1450 ppm of fluoride (CD); and whitening with 10% carbamide peroxide (CP). Color, microhardness, and surface alteration were analyzed at baseline and after 14 days of treatment. Three samples per group were randomly selected and examined using scanning electron microscopy (SEM) to analyze the morphology. RESULTS: PW exhibited greater color change for the ΔE00 , ΔWID, Δb* and ΔL* parameters than other groups (p < 0.05). After treatment, microhardness decreased in AC and CP groups (p < 0.05). Also, PW and AC groups showed more surface alteration than CD and CP (p < 0.001). Changes in the morphology of dental enamel were observed by SEM in PW and AC groups. CONCLUSION: Activated charcoal-based products showed a lower whitening effect than 10% carbamide peroxide. These products also influenced dental enamel microhardness, resulting in greater surface alteration. CLINICAL SIGNIFICANCE: Activated charcoal-based products promoted minimum whitening effects with significant enamel surface alteration. The 10% carbamide peroxide was more effective for whitening and caused slight enamel surface alteration.
Assuntos
Dentifrícios , Clareamento Dental , Animais , Bovinos , Peróxido de Carbamida , Carvão Vegetal/farmacologia , Esmalte Dentário , Dentifrícios/farmacologia , Dentifrícios/uso terapêutico , Peróxidos/farmacologia , Peróxidos/uso terapêutico , Clareamento Dental/métodos , Ureia/farmacologia , Ureia/uso terapêuticoRESUMO
This study evaluated the effect of aging on the microtensile bond strength (µTBS) between composite resin and human dentin bleached with 35% hydrogen peroxide (HP) or 10% carbamide peroxide (CP). Thirty intact extracted third molars were selected for the study. After the dentin surface was exposed, the smear layer was abraded with silicon carbide paper to ensure standardization. The teeth were randomly divided into 3 groups: 1 (G1), no treatment (control); 2 (G2), dentin bleached with CP (at-home bleaching); and 3 (G3), dentin bleached with HP (in-office bleaching). G2 and G3 were bleached according to the manufacturers' instructions and stored in distilled water for 21 days. The teeth in all 3 groups were then bonded with a dental bonding agent and nanohybrid composite resin. Each tooth was sectioned and divided into groups to allow evaluations at 3 time periods: 24 hours, 6 months, and 12 months. The specimens were stored in distilled water at 37°C ± 1°C until use. The µTBS of the specimens was tested on a universal testing machine. Fracture mode analysis was performed with a stereoscopic loupe. The data were analyzed statistically by 2-way analyses of variance and Tukey tests. After 24 hours, G3 had a significantly lower mean [SD] µTBS value (20.00 [5.67] MPa) than G1 (31.14 [8.83] MPa), but their means were statistically similar at 6 months (29.42 [7.72] MPa vs 22.97 [7.48] MPa, respectively). Tukey tests revealed that there was no statistically significant change in µTBS over time for G2 or G3. After 12 months of aging, only G1 specimens showed statistically lower µTBS values compared with the 24-hour time period (P < 0.05). Based on the results, the durability of the bond between composite resin and dentin is not affected by the choice of bleaching treatment.
Assuntos
Colagem Dentária , Adesivos Dentinários/química , Dentina/química , Clareamento Dental , Resinas Compostas , Humanos , Teste de Materiais , Cimentos de Resina , Resistência à TraçãoRESUMO
The purpose of this study was to investigate the influence of the irradiance emitted by a light-curing unit on microhardness, degree of conversion (DC), and gaps resulting from shrinkage of 2 dental composite resins. Cylinders of nanofilled and microhybrid composites were fabricated and light cured. After 24 hours, the tops and bottoms of the specimens were evaluated via indentation testing and Fourier transform infrared spectroscopy to determine Knoop hardness number (KHN) and DC, respectively. Gap width (representing polymerization shrinkage) was measured under a scanning electron microscope. The nanofilled composite specimens presented significantly greater KHNs than did the microhybrid specimens (P < 0.05). The microhybrid composite resin exhibited significantly greater DC and gap width than the nanofilled material (P < 0.05). Irradiance had a mostly material-dependent influence on the hardness and DC, but not the polymerization shrinkage, of composite resins.
Assuntos
Resinas Compostas/efeitos da radiação , Lâmpadas de Polimerização Dentária/efeitos adversos , Resinas Compostas/química , Dureza/efeitos da radiação , Polimerização/efeitos da radiação , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The application of bleaching agents before placement of resin-bonded fixed appliances significantly, but temporarily, reduces bond strength to tooth structure. Antioxidants have been studied as a means to remove residual oxygen that compromises bonding to bleached enamel. This in vitro study evaluated whether green tea (GT) could restore the shear bond strength between bonded orthodontic brackets and bleached enamel. Six experimental groups were compared: group 1, no bleaching plus bracket bonding (positive control); group 2, bleaching with 35% hydrogen peroxide (HP) plus bracket bonding (negative control); group 3, 35% HP plus 10% sodium ascorbate (SA) plus bracket bonding; group 4, 35% HP plus 10% GT plus bracket bonding; group 5, no bleaching plus 10% SA plus bracket bonding; group 6, no bleaching plus 10% GT plus bracket bonding. Results suggested that GT, like SA, may be beneficial for bracket bonding immediately after bleaching.
Assuntos
Colagem Dentária , Braquetes Ortodônticos , Chá/efeitos adversos , Clareadores Dentários/efeitos adversos , Clareamento Dental/efeitos adversos , Ácido Ascórbico/uso terapêutico , Esmalte Dentário/efeitos dos fármacos , Análise do Estresse Dentário , Humanos , Técnicas In VitroRESUMO
The aim of this study was to evaluate the bond strengths of composite restorations made with different filler amounts and resin composites that were photoactivated using a light-emitting diode (LED). Thirty bovine incisors were selected, and a conical cavity was prepared in the facial surface of each tooth. All preparations were etched with Scotchbond Etching Gel, the Adper Scotchbond Multipurpose Plus adhesive system was applied followed by photoactivation, and the cavities were filled with a single increment of Filtek Z350 XT, Filtek Z350 XT Flow, or bulk-fill X-tra fil resin composite (n = 10) followed by photoactivation. A push-out test to determine bond strength was conducted using a universal testing machine. Data (MPa) were submitted to Student's t-test at a 5% significance level. After the test, the fractured specimens were examined using an optical microscope under magnification (10x). Although all three composites demonstrated a high prevalence of adhesive failures, the bond strength values of the different resin composites photoactivated by LED showed that the X-tra fil resin composite had a lower bond strength than the Filtek Z350 XT and Filtek Z350 XT Flow resin composites.
Assuntos
Resinas Acrílicas/farmacologia , Resinas Compostas/farmacologia , Colagem Dentária , Restauração Dentária Permanente , Poliuretanos/farmacologia , Animais , Bovinos , MetacrilatosRESUMO
INTRODUCTION: The aim of this study was to evaluate the surface roughness and morphology of enamel with a surface roughness tester and scanning electron microscopy after the removal of metal brackets and polishing. METHODS: Ten orthodontic patients were selected for the study. At the conclusion of orthodontic treatment, their metal brackets were removed. For each patient, teeth on one side of the mouth were randomly chosen for finishing and polishing with aluminum oxide discs (n = 10). Teeth on the other side were finished with multilaminated carbide burs (n = 10). Dental replicas (before and after tooth polishing) were obtained with epoxy resin. Three surface roughness measurements were made in different directions with an angle of 120° among them, and a mean for each dental replica was calculated. The roughness data were statistically evaluated by repeated-measurements analysis of variance. Three specimens from each group were also used for scanning electron microscopy analysis. RESULTS: After resin removal, the average roughness in the carbide bur group (0.31 µm) was significantly greater than that in the aluminum oxide disc group (0.25 µm). CONCLUSIONS: The aluminum oxide disc polishing system resulted in less enamel roughness than did the multilaminated carbide bur system.
Assuntos
Descolagem Dentária/métodos , Esmalte Dentário/ultraestrutura , Profilaxia Dentária/métodos , Incisivo/ultraestrutura , Braquetes Ortodônticos , Condicionamento Ácido do Dente/métodos , Adesividade , Adolescente , Óxido de Alumínio/química , Carbono/química , Resinas Compostas/química , Ligas Dentárias/química , Colagem Dentária/métodos , Cimentos Dentários/química , Descolagem Dentária/instrumentação , Profilaxia Dentária/instrumentação , Resinas Epóxi/química , Feminino , Humanos , Cura Luminosa de Adesivos Dentários , Masculino , Microscopia Eletrônica de Varredura/métodos , Ácidos Fosfóricos/química , Técnicas de Réplica , Dióxido de Silício/química , Aço Inoxidável/química , Propriedades de Superfície , Adulto Jovem , Zircônio/químicaRESUMO
The aim of this study was to evaluate the effect of bleaching on the flexural strength of bovine dentin, using bleaching agents containing calcium (Whiteness HP Blue and Whiteness Class) and not containing calcium (Whiteness HP and Whiteness Perfect). Sixty bovine incisor tooth slices were obtained and divided into fve experimental groups (n = 12), such as G1, untreated control group; G2, Whiteness HP Max [35% hydrogen peroxide (HP)]; G3, Whiteness HP Blue (35% HP); G4, Whiteness Class (7.5% HP) and G5, Whiteness Perfect (22% carbamide peroxide). Samples were submitted to bleaching treatment according to the manufacturers' instructions. The control group remained in artificial saliva during bleaching. After bleaching, the enamel was removed and dentin specimens (7 mm length × 1.7 mm width × 0.5 mm thickness) were prepared. Samples were tested in a universal testing machine (EMIC). Data were analyzed by analysis variance (ANOVA) and Tukey's test. Differences between the groups were identified by ANOVA. The mean values (± standard deviation) for the experimental groups, such as (in MPa) G1 = 19.05 ± 2.68 a; G2 = 12.69 ± 4.52 b; G3 = 16.39 ± 3.74 ab; G4 = 14.90 ± 5.60 ab; and G5 = 12.71 ± 2.25 b. Groups with the same lowercase letter were significantly different from each other. The presence of calcium in bleaching agents appeared to influence the flexural strength of bovine dentin after bleaching treatment, for both office bleaching (35% HP) and home bleaching (7.5% HP).
Assuntos
Dentina/efeitos dos fármacos , Clareadores Dentários/farmacologia , Animais , Fenômenos Biomecânicos , Cálcio/farmacologia , Peróxido de Carbamida , Bovinos , Análise do Estresse Dentário/instrumentação , Peróxido de Hidrogênio/administração & dosagem , Peróxido de Hidrogênio/farmacologia , Peróxidos/farmacologia , Maleabilidade , Saliva Artificial/química , Estresse Mecânico , Fatores de Tempo , Clareamento Dental/métodos , Ureia/análogos & derivados , Ureia/farmacologiaRESUMO
This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.
Assuntos
Resinas Compostas , Cimentos de Ionômeros de Vidro , Humanos , Teste de Materiais , Resinas Compostas/química , Materiais Dentários/química , Resistência à Flexão , DurezaRESUMO
OBJECTIVE: This randomized controlled clinical trial evaluated the whitening efficacy, tooth sensitivity (TS), and volunteers' satisfaction following the use of activated charcoal powder and toothpaste. METHODS: Fifty-six volunteers were randomly allocated into 4 groups (n = 14) according to a 14-day toothbrushing or whitening treatment with activated charcoal powder (ACPW), activated charcoal toothpaste (ACT), regular fluoridated toothpaste (RT), and 10 % carbamide peroxide (CP). Objective (ΔE00) and subjective (ΔSGU) color and whiteness index (ΔWID) changes were calculated. Patients self-reported the risk and intensity of TS using a visual analogue scale and the volunteer's satisfaction was determined by a questionnaire. Color assessments were analyzed by Kruskal-Wallis followed by Dwas-Steel-Crithlow-Fligner, and absolute TS risk and volunteer's satisfaction by Fisher exact test (p < 0.05). RESULTS: ACPW and ACT promoted similar effects in ΔE00, ΔSGU, and ΔWID to that observed for RT. No significant difference was found in terms of TS risk intensity. TS risk became high after 7 and 14 days, with higher TS prevalence in CP. Volunteers reported that ACPW exhibited the lowest ease-of-use, comfort, and whitening satisfaction among groups (p < 0.05). CONCLUSION: Activated charcoal-based products presented a minor and unsatisfactory whitening effect while CP resulted in optimal tooth whitening and the highest level of satisfaction among volunteers. Risk was higher from 7 days onwards and was more pronounced in the CP. CLINICAL RELEVANCE: Based on the whitening effect and patient satisfaction, this controlled-randomized clinical evidence supports that the use of activated charcoal-based products should be discouraged.
Assuntos
Sensibilidade da Dentina , Clareamento Dental , Humanos , Peróxido de Hidrogênio/uso terapêutico , Carvão Vegetal/uso terapêutico , Cremes Dentais/uso terapêutico , Pós , Método Simples-Cego , Clareamento Dental/métodos , Peróxido de Carbamida , Sensibilidade da Dentina/tratamento farmacológicoRESUMO
Background: Among the main advantages of self-adhesive resin cements comprise good aesthetics, strong restoration-tooth bond and biocompatibility. However, some disadvantages, such as high viscosity level, color limitation and short shelf life should be mentioned. Thus, the aim of the current study was to assess bond strength between fiberglass post and root dentin in teeth subjected to self-adhesive resin cements with expired shelf life and hardness. Material and Methods: Sixty (60) single-rooted human teeth were sectioned and divided into 2 groups of different cements: U200 3M and MaxCem Elite Kerr. Each group was divided into 3 subgroups, based on self-adhesive resin cements' shelf life, namely: Within the use-time recommended by the manufacturer or no expiration date; 6 months after opening the aluminum blister; 12 months after opening the aluminum blister. Bond strength was measured through push-out test conducted in universal testing machine; fracture pattern was analyzed, and microhardness was investigated through Knoop test, based on hardness readings. Data were subjected to Shapiro-Wilk normality test; nonparametric test was applied to hardness data, whereas parametric test was applied to bond strength data. Hardness data were subjected to Kruskal-Wallis test, whereas bond strength data were subjected to analysis of variance, which was followed by Tukey test; both tests were conducted at 5% significance level (α = 0.05). Results: There was no statistically significant difference in knoop hardness values recorded for the material / time / root thirds combination (p=0.483). There was no statistically significant difference in bond strength values recorded for the Material / Time / Thirds combination (p=0.237). Conclusions: It was possible concluding that shelf life did not influence material's hardness and bond strength. Key words:Dental cements, Resin Cements, Shelf Life of Products.
RESUMO
OBJECTIVE: To evaluate the effects of activated charcoal-based products used in two presentation forms (powder or toothpaste), compared to 10 % carbamide peroxide and conventional toothpaste on aesthetic perception and psychosocial impact before and after treatment. METHODS: Fifty-six participants were divided into 4 experimental groups (n = 14). Activated charcoal-based powder (PW); Activated charcoal-based dentifrice (AC); Conventional fluoride toothpaste (CD) and 10 % carbamide peroxide (CP). All products were used for 14 days. Psychosocial impact on dental esthetics (PIDAQ), oral health impact profile (OHIP- Esthetics) and orofacial esthetics scale (OES) questionnaires were applied before and after treatment. Descriptive and exploratory data analyses were performed and analyzed using linear mixed models for repeated measures over time considering significance level of α = 0.05. RESULTS: For PIDAQ, the CP group showed significant decrease in psychological impact, aesthetic perception domains and overall score, while in the PW group, there was only a significant decrease in the psychological impact domain. Decrease in OHIP was observed for the functional limitation domain scores for treatments with CP and PW, in the psychological discomfort domain, decrease was observed for all groups, while for the OES questionnaire, significant increase in the color domain was observed for the CP group. CONCLUSION: Activated charcoal-based products showed lower scores in all questionnaires when compared with carbamide peroxide; thus, charcoal-based products promoted lower impact on quality of life and aesthetic perception. CLINICAL RELEVANCE: In this randomized clinical trial, charcoal-based OTC products had inferior quality of life and aesthetic perception results compared to conventional carbamide peroxide bleaching.
Assuntos
Clareadores , Clareadores Dentários , Clareamento Dental , Humanos , Clareamento Dental/métodos , Peróxido de Carbamida , Carvão Vegetal/uso terapêutico , Clareadores Dentários/uso terapêutico , Estética Dentária , Qualidade de Vida/psicologia , Pós , Cremes Dentais , Percepção , Peróxido de Hidrogênio/uso terapêutico , Ureia/uso terapêutico , Peróxidos/uso terapêuticoRESUMO
Objective: The aim of the study was to characterize and evaluate the stability, antimicrobial activity, cytotoxicity, and remineralizing effects of silver nanoparticles and fluoride anticaries agent (AgF) on staining dental enamel. Materials and Methods: An experimental AgF solution was prepared and compared to silver diamine fluoride (SDF). First, the AgF was characterized and the stability was evaluated by transmission electron microscopy (TEM). Streptococcus mutans, Enterococcus faecalis, and Escherichia coli strains were used to evaluate the minimum inhibitory and bactericidal concentration and cytotoxicity performed using L929 fibroblastic cells by MTT test. Caries-like lesions induced by pH-cycling in human enamel were obtained, and then, the superficial microhardness, cross-sectional microhardness (CSMH), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were performed. Photographic images were taken to analyze the enamel staining. Results: The AgF showed stableness in long term with bacteriostatic and bactericidal actions without cytotoxicity. Enamel remineralization, in surface and in depth (CSMH), was observed when the AgF was used, and it was similar to SDF. SEM showed enamel precipitation, and EDS observed the presence of P, Ca, Au, Ag, and Cl elements. Contrary to SDF, AgF did not stain the enamel. Conclusion: The nano silver fluoride anticaries agent tested presented long-term stability, superficial and in-depth remineralizing capacity with antimicrobial potential and biocompatibility and did not stain the enamel.
RESUMO
The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC. The color of the buccal surface of each tooth was measured through spectrophotometry and visual examination before the bracket-fixation process. Four individuals were excluded during the follow-up; thus 10 patients were evaluated (n=10). Brackets were removed after 12 months of orthodontic treatment, tooth color measurement and visual examination were performed again, and Adhesive Remaining Index (ARI) was also measured. ΔE and L* results were subjected to Student's t-test and by repeated-measures analysis of variance, respectively (α=0.05). ARI data were analyzed in percentages. There was statistically significant difference in ΔE between groups; the R group showed statistically higher values of L* after orthodontic treatment. ARI of 2 and 3 prevailed in the RMGIC group, whereas the R group presented 0 and 1. After orthodontic treatment, the RMGIC group presented smaller changes in ΔE, and the increase in the white scale was observed on the enamel surface around the area where brackets were fixed in the R group. The visual analysis did not show color change on the evaluated teeth.
Assuntos
Esmalte Dentário , Ortodontia Corretiva , HumanosRESUMO
The longevity of prosthetic rehabilitation is determined by the stability of the implant and abutment interfaces. True morse taper connections on dental restorations have been effective, however activation force still empirical. This work compared the activation strength and internal contact of Morse taper system according to the removal force. Eighty sets, composed of implants and prosthetic abutments, were evaluated with different internal contact areas; 15.12mm2 (G3.3) and 21.25mm2 (G4.3). The specimens were activated at 0° and 30°, with loads of 10, 20, 40 and 60N. The specimens were submitted to tensile test and the data to ANOVA and Tukey's tests (α=0.05). Representative specimens were examined under SEM. Removal force of G3.3 (2.15±1.33MPa) did not differed to G4.3 (1.99±1.03MPa). The activation at 0º (2.95±0.98MPa) statistically differed to 30º (1.19±0.54MPa). The 60N load was statistically superior for G3.3 and there was no statistical difference between 20N to 60N in G4.3. The values of 10N at 30o and 20N at the long axis of the morse taper implant, independent of the frictional contact area showed the best settlement.
Assuntos
Projeto do Implante Dentário-Pivô , Implantes Dentários , Dente Suporte , Análise do Estresse DentárioRESUMO
AIM: This study investigated the influence of different composite resin organic matrix (methacrylate - Filtek Z350 XT and silorane - Filtek P90) on light energy transmission through the composite and bottom/top rate. MATERIALS AND METHODS: A light-emitting diode (New Blue Phase), light-curing unit was used with different photoactivation protocols (high-continuous mode - HCM, 1400 mW/cm2 for 20 seconds; low-continuous mode - LCM , 700 mW/cm2 for 40 seconds; and soft-start mode - SSM, 140 mW/cm2 for 5s followed by 39 seconds for 700 mW/cm2). Twenty specimens were prepared for each composite. The light energy transmission through the composite was calculated (n=10). The bottom/top rate of the same specimen was calculated (n=10). The data were compared by Tukey's test in different tests (light energy transmission through the composite and bottom/top rate). RESULTS: The light energy transmission through the Filtek Z350 XT composite (HCM - 576 mW/cm2, LCM - 238 mW/cm2, SSM - 232 mW/cm2) did not show statistical difference when compared with Filtek P90 composite (HCM - 572 mW/cm2, LCM - 233 mW/cm2, SSM - 230 mW/cm2). The bottom/top rate of the Filtek Z350 XT composite (HCM - 88.98%, LCM - 90.94%, SSM - 89.92%) was statistically higher than that of the Filtek P90 composite (HCM-77.29%, LCM-77.51%, SSM- 77.79%). CONCLUSION: Light energy transmission through the composite was not influenced by the use of different dental composite restoratives. However, the bottom/top rate of the composites was influenced by the use of different dental composite restoratives. CLINICAL SIGNIFICANCE: Insufficiently polymerized composite resin may present a large number of problems. For this reason, dental composite resins should have the similar deep surface polymerization as the top surface in dental restorations.
Assuntos
Resinas Compostas/efeitos da radiação , Luz , Metacrilatos/efeitos da radiação , Siloxanas/efeitos da radiação , Bis-Fenol A-Glicidil Metacrilato/química , Bis-Fenol A-Glicidil Metacrilato/efeitos da radiação , Compostos Inorgânicos de Carbono/química , Resinas Compostas/química , Lâmpadas de Polimerização Dentária , Dureza , Humanos , Teste de Materiais , Metacrilatos/química , Processos Fotoquímicos , Polietilenoglicóis/química , Polietilenoglicóis/efeitos da radiação , Polimerização , Ácidos Polimetacrílicos/química , Ácidos Polimetacrílicos/efeitos da radiação , Poliuretanos/química , Poliuretanos/efeitos da radiação , Doses de Radiação , Compostos de Silício/química , Resinas de Silorano , Siloxanas/química , Propriedades de Superfície , Temperatura , Fatores de TempoRESUMO
BACKGROUND: Silver diamine fluoride has attracted attention because of its clinical success in arresting dental caries. Thus, the aim of this study was to evaluate the effect of different application times and concentrations of silver diamine fluoride (SDF) on deciduous tooth enamel remineralization. MATERIAL AND METHODS: Blocks of deciduous tooth enamel were categorized into six groups of 11 each: 2 control groups: intact enamel, and demineralized enamel; 38% SDF and 30% SDF which were subdivided according to application times (1 and 3 min). The microhardness of samples was determined, and all groups except the intact enamel group were subjected to pH cycling to produce initial carious lesions. The 38% and 30% SDF solutions were applied to the enamel for 1 or 3 min. After pH cycling and SDF treatments, the microhardness was again determined. Samples were sectioned to evaluate the cross-sectional microhardness. Furthermore, internal porosity of the samples was examined using micro-CT. Data were statistically analyzed by analysis of variance followed by Tukey's test, and linear regression analyses were performed. RESULTS: There was no difference in enamel remineralization based on surface and cross-sectional microhardness. The 30% SDF solution applied for 3 min promoted significantly less pores than the other groups. CONCLUSIONS: The 1-min application time promoted enamel remineralization regardless of the SDF concentration (30% or 38%). Key words:Cariostatic agents, dental caries, primary tooth, tooth remineralization.
RESUMO
OBJECTIVE: To evaluate the chemical degradation effect on microhardness and roughness of composite resins after aging. MATERIALS AND METHODS: Specimens (n = 10) were used for Filtek Z350 XT (Z350), Filtek Bulk Fill (BULK), Micerium HRI (HRI), Micerium BIOFUNCION (BIO), and Vittra APS (VITTRA). Microhardness and roughness were performed before and after degradation with the followed solutions: citric acid, phosphoric acid, 75% alcohol, and distilled water. Samples were to a 180-day chemical cycling protocol. After degradation, one sample of each group was selected for scanning electron microscope evaluation. The data were analyzed with normal distribution (Kolmogorov-Smirnov) and similarities of variations for the Bartlett test. ANOVA (two-way) followed by Tukey's test was performed considering treatment and composite resin (P < 0.05). RESULTS: For microhardness and roughness, variations were noted to different solution and resin formulations. Z350 and HRI showed higher microhardness percentage loss, and it was more evident after storage in alcohol (-48.49 ± 20.16 and -25.02 ± 14.04, respectively) and citric acid (-65.05 ± 28.97 and 16.12 ± 8.35, respectively). For roughness, Z350 and VITTRA showed less delta values after alcohol storage (-0.047 ± 0.007 and -0.022 ± 0.009, respectively). HRI had the worst roughness for citric acid (-0.090 ± 0.025). All resins were not statistically different between each other in water and phosphoric acid. CONCLUSION: The formulations of restorative resin materials influenced in degree of surface degradation after 180 days of chemical degradation. Water was considered the solution that causes less degradation for microhardness and roughness evaluations. For microhardness, alcohol was considered the worst solution for Z350 and HRI. For superficial roughness, Z350 and VITTRA showed less degradation in alcohol and citric and phosphoric acid solutions.
RESUMO
This study evaluated the chemical composition and microhardness of human enamel treated with an Enamel Matrix Derivative (EMD) solution, and the bond strength between composite resin and this enamel. Thirty human enamel samples were randomly divided into three groups: Untouched Enamel (UE), Demineralized Enamel (DE) and Demineralized Enamel Treated with EMD (ET). DE and ET groups were subjected to acid challenge and ET treated with EMD (EMD was directly applied over conditioned enamel and left for 15 min). Samples from each group (n=4) had chemical composition assessed through to attenuated total reflectance Fourier transform infrared (ATR-FTIR). Knoop microhardness of enamel samples from each group (n=10) was measured. For the microshear bond strength, the samples were etched for 30 s, and the adhesive was applied and cured for 10 s. Two matrixes were placed on the samples, filled with Filtek Z350 XT composite and cured for 20 s, each. The matrix was removed, and the microshear bond strength of each group (n=10) was tested. Data were subjected to Kruskal-Wallis test (for microhardness), to analysis of variance and to Tukey's test (for microshear bond strength); (α=0.05). FTIR results have shown phosphate (hydroxyapatite indicator) in 900-1200 cm-1 bands in the UE and ET groups, which were different from the DE group. Microhardness and microshear analyses recorded higher statistical values for the UE and ET groups than for DE. EMD application to demineralized enamel seems to have remineralized the enamel; thus, the microhardness and bond strength was similar between UE and ET groups.
Assuntos
Colagem Dentária , Resinas Compostas , Cimentos Dentários , Esmalte Dentário , Dureza , Humanos , Teste de Materiais , Cimentos de Resina , Resistência ao CisalhamentoRESUMO
The aims of this in vivo study were to evaluate the effect of bonding with resin-modified glass ionomer cement (RMGIC) and to assess enamel surface roughness before and after the removal of brackets bonded with composite or RMGIC from the maxillary central incisors. Fifteen orthodontic patients were selected for the study. For each patient, the teeth were rinsed and dried, and brackets were bonded with composite (Transbond XT) and RMGIC (Vitremer Core Buildup/Restorative). At the conclusion of orthodontic treatment, their brackets were removed. Dental replicas were made of epoxy resin in initial conditions (before bonded) and after polishing with an aluminum oxide disc system. Adhesive remnant index (ARI) and surface roughness was measured on the dental replicas and data were evaluated statistically by Mann-Whitney and paired t-test, respectively. No bracket debonding occurred during patients' treatment periods. It was verified that the ARI values of the two maxillary central incisors were similar (p = 0.665). For both bonding materials, the ARI value of 3 was predominant. After polishing, surface roughness was similar in the composite and RMGIC groups (0.245 µm and 0.248 µm, respectively; p = 0.07). In both groups, enamel surface roughness values were significantly lower after polishing compared with the initial condition (p < 0.001). RMGIC promoted efficiency in cementing brackets without fail during treatment; the choice of composite or RMGIC materials was not a factor that influenced the roughness of the enamel surface, however, polishing led to smoother surfaces than those found at the beginning of the treatment.
Assuntos
Colagem Dentária , Braquetes Ortodônticos , Condicionamento Ácido do Dente , Cimentos Dentários , Esmalte Dentário , Cimentos de Ionômeros de Vidro , Humanos , Teste de Materiais , Cimentos de Resina , Propriedades de SuperfícieRESUMO
OBJECTIVES: To evaluate the microhardness of tooth enamel remineralized with enamel matrix protein solution as well as the shear bond strength of orthodontic brackets bonded to this surface. MATERIALS AND METHODS: In total, 24 human premolars were selected and divided into 3 experimental groups (n = 8): SE-sound enamel, DE-demineralized enamel, and TE-demineralized enamel treated with amelogenin solution. Samples from DE and TE groups were subjected to pH cycling to induce initial artificial caries lesion. TE group was treated with amelogenin solution. Samples were placed in artificial saliva for 7 days. Knoop microhardness was measured before any intervention (T0), after pH cycling (T1) and after amelogenin solution treatment application (T2). Twenty-four hours after ceramic orthodontic brackets were bonded, samples were subjected to shear test in a universal testing machine. Microhardness and shear measurement distributions were subjected to Kolmogorov-Smirnov normality test, which was followed by parametric tests (α = 0.05): 2-way analysis of variance (factors: enamel condition × treatment) and Tukey posttest for all three groups (SE, DE, and TE) in T0 and T2 for microhardness; analysis of variance and Tukey's test, for shear bond strength test. RESULTS: Means recorded for Knoop microhardness in T2, for the SE (366.7 KHN) and TE (342.8 KHN) groups, were significantly higher than those recorded for the DE group (263.5 KHN). The shear bond strength of the SE (15.44 MPa) and TE (14.84 MPa) groups statistically differed from that of the DE group (11.95 MPa). CONCLUSION: In vitro demineralized enamel treatment with amelogenin solution was capable of taking samples' hardness back to levels similar to those observed for sound enamel. The shear bond strength on the enamel subjected to this treatment was similar to that observed for healthy enamel and higher than that observed for demineralized enamel.