Suppressed Droplet Splashing on Positively Skewed Surfaces for High-Efficiency Evaporation Cooling.

Two types of functional surfaces with the same roughness but completely different surface topographies are prepared, namely positively skewed surfaces filled with micropillar arrays (Sa ≈4.4 µm, Ssk >0) and negatively skewed surfaces filled with microcavity arrays (Sa ≈4.4 µm, Ssk <0), demonstrating promoting droplet splashing. Remarkably, the critical Weber number for generating satellite droplets on the negatively skewed surfaces is significantly lower than that on the positively skewed surfaces, indicating that the negatively skewed surface with microcavity arrays is more likely to promote droplet splashing. It is mainly attributed to the fact that air on the negatively skewed surface can make the liquid film take on a Cassie-Baxter state on the surface so that the stabilizing capillary force of the liquid film exceeds the destabilizing stress of the air film. Moreover, the surface topography promoting droplet spreading and the mechanical properties of three-phase moving contact lines are analyzed from the perspective of microscopic interface mechanics. Finally, it is demonstrated the designed positively skewed surfaces can be employed for large-area heat dissipation by means of high-efficiency evaporation.

Single-Shot Readout of a Solid-State Electron Spin Qutrit.

Quantum systems usually feature a rich multilevel structure with promising resources for developing superior quantum technologies compared with their binary counterpart. Single-shot readout of these high-dimensional quantum systems is essential for exploiting their potential. Although there have been various high-spin systems, the single-shot readout of the overall state of high-spin systems remains a challenging issue. Here we demonstrate a reliable single-shot readout of spin qutrit state in a low-temperature solid-state system utilizing a binary readout scheme. We achieve a single-shot readout of an electron spin qutrit associated with a single nitrogen-vacancy center in diamond with an average fidelity of 87.80%. We use this spin qutrit system to verify quantum contextuality, a fundamental test of quantum mechanics. We observe a violation of the noncontextual hidden variable inequality with the developed single-shot readout in contrast to the conventional binary readout. These results pave the way for developing quantum information processing based on spin qutrits.

Armored Superhydrophobic Surfaces with Excellent Drag Reduction in Complex Environmental Conditions.

Superhydrophobic surfaces (SHSs) have possibilities for achieving significantly reduced solid-liquid frictional drag in the marine sector due to their excellent water-repelling properties. Although the stability of SHSs plays a key role in drag reduction, little consideration was given to the effect of extreme environments on the ability of SHSs to achieve drag reduction underwater, particularly when subjected to acidic conditions. Here, we propose interconnected microstructures to protect superhydrophobic coatings with the aim of enhancing the stability of SHSs in extreme environments. The stability of armored SHSs (ASHSs) was demonstrated by the contact angle and bounce time of droplets on superhydrophobic surfaces treated by various methods, resulting in an ASHS surface with excellent stability under extreme environmental conditions. Additionally, inspired by microstructures protecting superhydrophobic nanomaterials from frictional wear, the armored superhydrophobic spheres (ASSPs) were designed to explain from theoretical and experimental perspectives why ASSPs can achieve sustainable drag reduction and demonstrate that the ASSPs can achieve drag reduction of over 90.4% at a Reynolds number of 6.25 × 104 by conducting water entry experiments on spheres treated in various solutions. These studies promote a fundamental understanding of what drives the application of SHSs under extreme environmental conditions and provide practical strategies to maximize frictional drag reduction.

Endosome associated trafficking regulator 1 promotes tumor growth and invasion of glioblastoma multiforme via inhibiting TNF signaling pathway.

PURPOSE: Endosome associated trafficking regulator 1 (ENTR1) is a novel endosomal protein, which can affect multiple cellular biological behavior by remodeling plasma membrane structures. However, little is known regarding its function and underlying mechanisms in glioblastoma multiforme. METHODS: Expression profile and clinical signature were obtained from The Public Database of human tumor. Immunohistochemical staining and western blotting assays were used to measure ENTR1 expression level. Human primary GBM tumor cells and human GBM cell lines A172, U87 and U251 were used to clarify the precise role of ENTR1. CCK-8 assays, wound healing and transwell invasion assays were designed to investigate cell viability, invasion and migration of GBM cells, respectively. Underlying molecular mechanisms of ENTR1 were determined via RNA-seq analysis. Tumor formation assay was used to validate the influence of ENTR1 in vivo. RESULTS: Compared with normal brain tissues, ENTR1 was highly expressed in gliomas and correlated with malignant grades of gliomas and poor overall survival time. The proliferation and invasion of GBM cells could be weaken and the sensitivity to temozolomide (TMZ) chemotherapy increased after knocking down ENTR1. Overexpression of ENTR1 could reverse this effect. RNA-seq analysis showed that tumor necrosis factor (TNF) signaling pathway might be a putative regulatory target of ENTR1. Tumor formation assay validated that ENTR1 was a significant factor in tumor growth. CONCLUSION: Our results indicated that ENTR1 played an important role in cell proliferation, invasion and chemotherapeutic sensitivity of GBM, suggesting that ENTR1 might be a novel prognostic marker and significant therapeutic target for GBM.

Cargo-eliminated osteosarcoma-derived small extracellular vesicles mediating competitive cellular uptake for inhibiting pulmonary metastasis of osteosarcoma.

Osteosarcoma (OS) derived small extracellular vesicles (OS-sEVs) have been shown to induce the formation of cancer-associated fibroblasts (CAFs), characterized by elevated pro-inflammatory factor expression and enhanced migratory and contractile abilities. These CAFs play a crucial role in priming lung metastasis by orchestrating the pre-metastatic niche (PMN) in the lung. Disrupting the communication between OS-sEVs and lung fibroblasts (LFs) emerges as a potent strategy to hinder OS pulmonary metastasis. Our previously established saponin-mediated cargo-elimination strategy effectively reduces the cancer-promoting ability of tumor-derived small extracellular vesicles (TsEVs) while preserving their inherent targeting capability. In this study, we observed that cargo-eliminated OS-sEVs (CE-sEVs) display minimal pro-tumoral and LFs activation potential, yet retain their ability to target LFs. The uptake of OS-sEVs by LFs can be concentration-dependently suppressed by CE-sEVs, preventing the conversion of LFs into CAFs and thus inhibiting PMN formation and pulmonary metastasis of OS. In summary, this study proposes a potential strategy to prevent LFs activation, PMN formation in the lung, and OS pulmonary metastasis through competitive inhibition of OS-sEVs' function by CE-sEVs.

Meta-Quantitative Trait Loci Analysis and Candidate Gene Mining for Drought Tolerance-Associated Traits in Maize (Zea mays L.).

Drought is one of the major abiotic stresses with a severe negative impact on maize production globally. Understanding the genetic architecture of drought tolerance in maize is a crucial step towards the breeding of drought-tolerant varieties and a targeted exploitation of genetic resources. In this study, 511 quantitative trait loci (QTL) related to grain yield components, flowering time, and plant morphology under drought conditions, as well as drought tolerance index were collected from 27 published studies and then projected on the IBM2 2008 Neighbors reference map for meta-analysis. In total, 83 meta-QTL (MQTL) associated with drought tolerance in maize were identified, of which 20 were determined as core MQTL. The average confidence interval of MQTL was strongly reduced compared to that of the previously published QTL. Nearly half of the MQTL were confirmed by co-localized marker-trait associations from genome-wide association studies. Based on the alignment of rice proteins related to drought tolerance, 63 orthologous genes were identified near the maize MQTL. Furthermore, 583 candidate genes were identified within the 20 core MQTL regions and maize-rice homologous genes. Based on KEGG analysis of candidate genes, plant hormone signaling pathways were found to be significantly enriched. The signaling pathways can have direct or indirect effects on drought tolerance and also interact with other pathways. In conclusion, this study provides novel insights into the genetic and molecular mechanisms of drought tolerance in maize towards a more targeted improvement of this important trait in breeding.

LILRB2-containing small extracellular vesicles from glioblastoma promote tumor progression by promoting the formation and expansion of myeloid-derived suppressor cells.

BACKGROUND: Leukocyte immunoglobulin-like receptor subfamily B2 (LILRB2) was reported to be an inhibitory molecule with suppressive functions. sEVs mediate communication between cancer cells and other cells. However, the existence of LILRB2 on sEVs in circulation and the function of sEVs-LILRB2 are still unknown. This study aims to investigate the role of LILRB2 in GBM and determine how LILRB2 in sEVs regulates tumor immunity. METHODS: LILRB2 expression in normal brain and GBM tissues was detected by immunohistochemistry, and the effect of LILRB2 on prognosis was evaluated in an orthotopic brain tumor model. Next, a subcutaneous tumor model was constructed to evaluate the function of pirb in vivo. The immune cells in the tumor sites and spleen were detected by immunofluorescence staining and flow cytometry. Then, the presence of pirb in sEVs was confirmed by WB. The percentage of immune cells after incubation with sEVs from GL261 (GL261-sEVs) or sEVs from GL261-pirb+ (GL261-sEVs-pirb) was detected by flow cytometry. Then, the effect of pirb on sEVs was evaluated by a tumor-killing assay and proliferation assay. Finally, subcutaneous tumor models were constructed to evaluate the function of pirb on sEVs. RESULTS: LILRB2 was overexpressed in human GBM tissue and was closely related to an immunosuppressive TME in GBM. Then, a protumor ability of LILRB2 was observed in subcutaneous tumor models, which was related to lower CD8 + T cells and higher MDSCs (myeloid-derived suppressor cells) in the tumor and spleen compared to those of the control group. Next, we found that pirb on sEVs (sEVs-pirb) inhibits the function of CD8 + T cells by promoting the formation and expansion of MDSCs. Furthermore, the protumor function of sEVs-pirb was demonstrated in subcutaneous tumor models. CONCLUSION: We discovered that LILRB2/pirb can be transmitted between GBM cells via sEVs and that pirb on sEVs induces the formation and expansion of MDSCs. The induced MDSCs facilitate the formation of an immunosuppressive TME.

Delayed Leidenfrost Effect of a Cutting Droplet on a Microgrooved Tool Surface.

Regulation over the generation of the Leidenfrost phenomenon in liquids is vitally important in a cutting fluid/tool system, with benefits ranging from optimizing the heat transfer efficiency to improving the machining performance. However, realizing the influence mechanism of liquid boiling at various temperatures still faces enormous challenges. Herein, we report a kind of microgrooved tool surface by laser ablation, which could obviously increase both the static and dynamic Leidenfrost point of cutting fluid by adjusting the surface roughness (Sa). The physical mechanism that delays the Leidenfrost effect is primarily due to the ability of the designed microgroove surface to store and release vapor during droplet boiling so that the heated surface requires higher temperatures to generate sufficient vapor to suspend the droplet. We also find six typical impact regimes of cutting fluid under various contact temperatures; it is worth noting that Sa has a great influence on the transform threshold among six impact regimes, and the likelihood that a droplet will enter the Leidenfrost regime decreases with increasing Sa. In addition, the synergistic effect of Sa and tool temperature on the droplet kinetics of cutting droplets is investigated, and the relationship between the maximum rebound height and the dynamic Leidenfrost point is correlated for the first time. Significantly, cooling experiments on the heated microgrooved surface are performed and demonstrate that it is effective to improve the heat dissipation ability of cutting fluid by delaying the Leidenfrost effect on the microgrooved heated surface.

Dynamic Behavior of Droplet Impact on Laminar Superheated Particles.

The impact of droplets on particles involves a wide range of complex phenomena and mechanisms, including bubble nucleation, crater formation, fluidization, and more intricate changes in the boiling regime when impacting superheated particles. In this study, we focus on droplet impact behavior on superheated laminar particles at various temperatures and define six typical characteristic patterns of a single droplet impact on superheated laminar particles, including film evaporation, bubbly boiling, immersion boiling, sputter boiling, transition boiling, and film boiling. It is worth noting that the variations of inertial force FI caused by gravity, the capillary force FC generated by the pores of the droplets, and the dewetting force by the vapor phase FV are the main contributors to different evaporation regimes. Interestingly, we find that the Leidenfrost point (LFP) of droplets on the laminar superheated particles decreases with particle size, which is related to the effect of the pore space generated between the laminar particles. Finally, the effect of temperature, particle size, and Weber number (We) on the dynamic behavior of droplet impact is revealed. Experimental results show that the instantaneous diameter of droplets is inversely proportional to the change of height, with different patterns of maximum spreading diameter and maximum bounce height at different particle sizes, while the maximum spreading velocity and maximum bounce velocity are independent of particle size. We believe the present work would provide a broader knowledge and comprehension of the droplet impact on heated particles and promote the development of the safety and productivity of industrial processes such as fluid catalytic cracking, spray drying, and spray cooling.

Spin Quantum Heat Engine Quantified by Quantum Steering.

Following the rising interest in quantum information science, the extension of a heat engine to the quantum regime by exploring microscopic quantum systems has seen a boon of interest in the last decade. Although quantum coherence in the quantum system of the working medium has been investigated to play a nontrivial role, a complete understanding of the intrinsic quantum advantage of quantum heat engines remains elusive. We experimentally demonstrate that the quantum correlation between the working medium and the thermal bath is critical for the quantum advantage of a quantum Szilárd engine, where quantum coherence in the working medium is naturally excluded. By quantifying the nonclassical correlation through quantum steering, we reveal that the heat engine is quantum when the demon can truly steer the working medium. The average work obtained by taking different ways of work extraction on the working medium can be used to verify the real quantum Szilárd engine.

Functional Microtextured Superhydrophobic Surface with Excellent Anti-Wear Resistance and Friction Reduction Properties.

The wear-resistant superhydrophobic (SHB) surfaces with excellent water-repellency ability were prepared by constructing a microtextured armor on an aluminum surface. With the assistance of laser-induced microtextures, the SHB surface could keep a longer water-repellency ability and a lower friction coefficient even after repeated friction tests under different loads and at different speeds. The mechanism of microtexture-protecting SHB coating is revealed based on both theoretical and elemental analysis. Additionally, we explore the relationship between the three-dimensional topography parameters (ISO 25178) and variation of water contact angles under different test recycles. The results show that the rough surface with appropriate Sa and higher Sku exhibits a better wear resistance, which is mainly related to the storing ability of SHB coating inside the microtextures. Moreover, the surface with appropriate Str exhibits excellent wear resistance, which is mainly associated with better chip-removal ability. Finally, the tribological properties of the microtextured SHB surface are researched. It is worth noting that compared with the microtextured surface without SHB coating and the SHB-coated surface without microtextures, the microtextured SHB surface has the lowest friction coefficient under dry friction because the SHB coating would largely decrease the surface energy of the interface, so the adhesion friction decreases. The microtexture armor on the surfaces would protect the wear of SHB coating, so the SHB coating inside the microtexture could continuously play the role of a particle lubricant at the sliding interface and decrease the friction force of the sliding interface. We believe that the present study would contribute to the further understanding of the constructing mechanism of anti-wear SHB surfaces and provide a new strategy for topography design of engineering surfaces with friction reduction properties.

Genetic Dissection of Phosphorus Use Efficiency and Genotype-by-Environment Interaction in Maize.

Genotype-by-environment interaction (G-by-E) is a common but potentially problematic phenomenon in plant breeding. In this study, we investigated the genotypic performance and two measures of plasticity on a phenotypic and genetic level by assessing 234 maize doubled haploid lines from six populations for 15 traits in seven macro-environments with a focus on varying soil phosphorus levels. It was found intergenic regions contributed the most to the variation of phenotypic linear plasticity. For 15 traits, 124 and 31 quantitative trait loci (QTL) were identified for genotypic performance and phenotypic plasticity, respectively. Further, some genes associated with phosphorus use efficiency, such as Zm00001eb117170, Zm00001eb258520, and Zm00001eb265410, encode small ubiquitin-like modifier E3 ligase were identified. By significantly testing the main effect and G-by-E effect, 38 main QTL and 17 interaction QTL were identified, respectively, in which MQTL38 contained the gene Zm00001eb374120, and its effect was related to phosphorus concentration in the soil, the lower the concentration, the greater the effect. Differences in the size and sign of the QTL effect in multiple environments could account for G-by-E. At last, the superiority of G-by-E in genomic selection was observed. In summary, our findings will provide theoretical guidance for breeding P-efficient and broadly adaptable varieties.

Changes in the Expression and Functional Activities of C-X-C Motif Chemokine Ligand 13 (CXCL13) in Hyperplastic Prostate.

BACKGROUND: C-X-C motif chemokine ligand 13 (CXCL13), a member of the CXC subtype in chemokine superfamily, affects numerous biological processes of various types of cells and the progress of a great number of clinical diseases. The purpose of the current study was to reveal the internal mechanism between CXCL13 and benign prostatic hyperplasia (BPH). METHODS: Human serum, prostate tissues and human prostate cell lines (BPH-1, WPMY-1) were utilized. The effect of recombinant human CXCL13 (rHuCXCL13) protein and the influences of the knockdown/overexpression of CXCL13 on two cell lines were studied. Rescue experiments by anti-CXCR5 were also conducted. In vivo, rHuCXCL13 was injected into the ventral prostate of rats. Additionally, a tissue microarray of hyperplastic prostate tissues was constructed to analyze the correlations between CXCL13 and clinical parameters. RESULTS: CXCL13 was highly expressed in the prostate tissues and upregulated in the BPH group. It was observed that CXCL13 modulated cell proliferation, apoptosis, and the epithelial-mesenchymal transition (EMT) through CXCR5 via AKT and the ERK1/2 pathway in BPH-1, while it contributed to inflammation and fibrosis through CXCR5 via the STAT3 pathway in WPMY-1. In vivo, rHuCXCL13 induced the development of rat BPH. Additionally, CXCL13 was positively correlated with the prostate volume and total prostate specific antigen. CONCLUSIONS: Our novel data demonstrated that CXCL13 modulated cell proliferation, cell cycle, the EMT of epithelial cells, and induced the fibrosis of prostatic stromal cells via a variety of inflammatory factors, suggesting that CXCL13 might be rediscovered as a potential therapeutic target for the treatment of BPH.

Wells-Dawson Arsenotungstate Porous Derivatives for Electrochemical Supercapacitor Electrodes and Electrocatalytically Active Materials.

Two Wells-Dawson arsenotungstate coordination polymers, [{CuII(bim)2}3(As2W18O62)] (1) and [(CuI10pz10Cl4)(As2W18O62)] (bim = 2,2'-biimidazole; pz = pyrazine), have been assembled via a hydrothermal method and fully characterized. Compound 1 exhibits a 2,6-connected two-dimensional hybrid layer based on asymmetrically modified {As2W18} anions and {Cu(bim)2} linkers, which is extended to a three-dimensional network with a special interlayer structure and a one-dimensional tunnel. Compound 2 is a host-guest framework that consists of a Cu-pz-Cl network with 20-member square rings, 16-member irregular rings, and embedded eight-node {As2W18} guest molecules. Compounds 1 and 2 show uncommon specific capacitance (834.8 and 960.1 F g-1, respectively, at a current density of 2.4 A g-1), enduring cycling stability (capacitance retention rates of 89.3% and 91.9%, respectively, after 5000 cycles), and good electrical conductivity, which are superior to those of the unmodified zero-dimensional Dawson arsenotungstate compound and most reported electrode materials in terms of their stable structure, special layer spacing, and orderly channels. Moreover, the title compounds exhibit excellent electrocatalytic activity for oxidizing ascorbic acid and reducing nitrite.

Quantum Simulation for Three-Dimensional Chiral Topological Insulator.

Quantum simulation, as a state-of-the-art technique, provides a powerful way to explore topological quantum phases beyond natural limits. Nevertheless, it is usually hard to simulate both the bulk and surface topological physics at the same time to reveal their correspondence. Here we build up a quantum simulator using nitrogen-vacancy center to investigate a three-dimensional (3D) chiral topological insulator, and demonstrate the study of both the bulk and surface topological physics by quantum quenches. First, a dynamical bulk-surface correspondence in momentum space is observed, showing that the bulk topology of the 3D phase uniquely corresponds to the nontrivial quench dynamics emerging on 2D momentum hypersurfaces called band inversion surfaces (BISs). This is the momentum-space counterpart of the bulk-boundary correspondence in real space. Further, the symmetry protection of the 3D chiral phase is uncovered by measuring dynamical spin textures on BISs, which exhibit perfect (broken) topology when the chiral symmetry is preserved (broken). Finally, we measure the topological charges to characterize directly the bulk topology and identify an emergent dynamical topological transition when varying the quenches from deep to shallow regimes. This work demonstrates how a full study of topological phases can be achieved in quantum simulators.

Molecular characterization of metallo-ß-lactamase- producing carbapenem-resistant Enterobacter cloacae complex isolated in Heilongjiang Province of China.

BACKGROUND: Enterobacter cloacae complex (ECC) is one of the most common extended-spectrum ß-lactamase and carbapenemase-producing pathogen that threatens millions of the elderly and vulnerable sick persons. The objective of this study was to perform the molecular characteristics of the carbapenem-resistant E. cloacae complex (CREC) emerged in Heilongjiang Province of China. METHODS: Six CREC strains were isolated from the patients with infectious diseases. The identities of ECC isolates were confirmed by sequencing the polymerase chain reaction (PCR) products of 16S rRNA gene. The characterization of the CREC isolates were analyzed by sequencing PCR products of the carbapenemase, ampC and fluoroquinolone resistance genes and performing multilocus sequence typing (MLST), pulsed-field gel electrophoresis (PFGE) and whole genome sequencing. RESULTS: All 6 isolates harbored multiple resistance genes. Of them, 5 carried metallo-ß-lactamases and one was blaKPC-2-positive. The levofloxacin and ciprofloxacin-resistant strains had substitutions of gyrA83, gyrA87, and parC80 in the quinolone-resistance determining regions. The MLST analyses revealed that 6 isolates belonged to five sequence types (ST520, ST528, ST1119, ST1120, and ST93) while the PFGE patterns of the isolates fallen into four clusters. The strain ST1120 was found to carry two separated plasmids that encode blaNDM-1 and blaIMP-4. CONCLUSIONS: Our study, for the first time, identified a CREC strain that co-produces blaNDM-1 and blaIMP-4 in the Northeast China. Our finding emphasizes an urgent need for more intensive surveillance and precaution measures to prevent the CERC spread.

A Prussian Blue ZnO Carbon Nanotube Composite for Chronoamperometrically Assaying H2O2 in BT20 and 4T1 Breast Cancer Cells.

A Prussian Blue (PB) zinc oxide carbon nanotube sensing composite was developed for the rapid assaying of H2O2 generated from BT20 and 4T1 breast cancer cells, important for elucidating mechanisms governing apoptosis of these cell lines. The combination of H2O2's transient nature along with matrix effects makes monitoring this molecule in biological samples a challenge. The standard addition method (SAM) was coupled with chronoamperometric sensing (CA) to overcome these obstacles. An electrocatalyst composite consisting of refluxed zinc oxide nanoparticles (NPs) tethered to carboxylic acid-functionalized multiwalled carbon nanotubes (ZnO/COOH-MWNTs) was electrostatically attached to PB for signal enhancement. Optimization of the sensor was achieved via adjusting solution pH and stirring time to optimize PB electrostatic attachment to ZnO/COOH-MWNTs prior to its deposition onto the working glassy carbon electrode (GCE) surface. CA SAM showed the ability to accurately measure H2O2 within the 1-21 µM range, suitable for monitoring cancer cell line apoptosis resistance scenarios and offering analytical advantages over standard enzyme-linked immunosorbent assays (ELISA) for rapid, matrix-effect-free analysis.

Correction to: Outbreak of carbapenem-resistant Acinetobacter baumannii carrying the carbapenemase OXA-23 in ICU of the eastern Heilongjiang Province, China.

After publication of the original article [1], we were notified that an author's name has been incorrectly spelled. Sedzro Divine Mensal should be replaced with Sedzro Divine Mensah.

Outbreak of carbapenem-resistant Acinetobacter baumannii carrying the carbapenemase OXA-23 in ICU of the eastern Heilongjiang Province, China.

BACKGROUND: To investigate the carbapenem resistance mechanisms and clonal relationship of carbapenem-resistant Acinetobacter baumannii (CRAB) strains isolated in the intensive care unit (ICU) of the First Affiliated Hospital of Jiamusi University, management approaches to ICU clonal CRAB outbreaks were described. METHODS: The sensitivity of the antibiotic was determined using the VITEK-2 automated system. Carbapenemase genes (blaTEM, blaSHV, blaKPC, blaNDM, blaIMP-4, blaVIM, blaOXA-23, blaOXA-24, blaOXA-51, and blaOXA-58), AmpC enzyme genes (blaACC, blaDHA, blaADC), and ISAba1 were assessed for all collected isolates using polymerase chain reaction (PCR). The transfer of resistance genes was investigated via conjugation experiments. The clonal relationship of isolates was determined via enterobacterial repetitive intergenic consensus (ERIC)-PCR and multilocus sequence typing (MLST). When the detection rate of CRAB increased from 25% in 2010 to 92% in 2014, a number of actions were initiated, including enhanced infection control, staff education, and the cleaning of the hospital environment. RESULTS: Clinical isolates were positive for the following genes: blaOXA23, blaOXA51, blaOXA24, blaADC, blaTEM, ISAba1, ISA-23, and ISA-ADC; however, blaOXA58, ISA-51, blaNDM, blaIMP, blaKPC, blaTEM, blaSHV, blaVIM, and blaACC were not detected. Four carbapenem-resistant isolates successfully transferred plasmids from A. baumannii isolates to E. coli J53. MLST showed that all strains belonged to ST2 except for one isolate, which belonged to the new genotype ST1199. The ERIC-PCR method found the following three genotypes: type A in 8, type B in 12, type C in 1, and two profiles (A, B) belonged to ST2. After taking control measures, the prevalence of CRAB isolates decreased, and the discovery rate of CRAB dropped to 11.4% in 2017. CONCLUSION: The obtained result suggests that blaOXA-23-producing CC2 isolates were prevalent in the ICU of the First Affiliated Hospital of Jiamusi University. Targeted surveillance was implemented to identify the current situation of the ICU and the further implementation of infection control effectively prevented the spread of nosocomial infection.

Simultaneous Determination and Analysis of Major Ginsenosides in Wild American Ginseng Grown in Tennessee.

Ginsenosides are the major constituent that is responsible for the health effects of American ginseng. The ginsenoside profile of wild American ginseng is ultimately the result of germplasm, climate, geography, vegetation species, water, and soil conditions. This is the first report to address the ginsenoside profile of wild American ginseng grown in Tennessee (TN), the third leading state for production of wild American ginseng. In the present study, ten major ginsenosides in wild American ginseng roots grown in TN, including Rb1, Rb2, Rb3, Rc, Rd, Re, Rf, Rg1, Rg2, and Rg3, were determined simultaneously. The chemotypic differences among TN wild ginseng, cultivated American ginseng, and Asian ginseng were assessed based on the widely used markers of ginsenoside profiling, including the top three ginsenosides, ratios of PPD/PPT, Rg1/Rb1, Rg1/Re, and Rb2/Rc. Our findings showed marked variation in ginsenoside profile for TN wild ginseng populations. Nevertheless, TN wild ginseng has significant higher ginsenoside content and more ginsenoside diversity than the cultivated ginseng. The total ginsenoside content in TN wild ginseng, as well as ginsenosides Rg1 and Re, increases with the age of the roots. Marked chemotypic differences between TN wild ginseng and cultivated American ginseng were observed based on the chemotypic markers. Surprisingly, we found that TN wild ginseng is close to Asian ginseng with regard to these characteristics in chemical composition. This study verified an accessible method to scientifically elucidate the difference in chemical constituents to distinguish wild from the cultivated American ginseng. This work is critical for the ecological and biological assessments of wild American ginseng so as to facilitate long-term sustainability of the wild population.