Polycaprolactone and polycaprolactone triol blends to obtain a stable liquid nanotechnological formulation: synthesis, characterization and in vitro - in vivo taste masking evaluation.

The use of polymeric blends is a potential strategy to obtain novel nanotechnological formulations aiming at drug delivery systems. Saquinavir, an antiretroviral drug, was chosen as a model drug for the development of new stable liquid formulations with unpleasant taste masking properties. Three formulations containing different polymeric ratios (1:3, 1:1 and 3:1) were prepared and properly characterized by particle size distribution, zeta potential, pH, drug content and encapsulation efficiency measurements. The stability was verified by monitoring the zeta potential, particle size distribution, polydispersity index and drug content by 90 days. The light backscattering analysis was used to early identify possible phenomena of instability in the formulations. The in vitro drug release and saquinavir cytotoxicity were evaluated. The in vitro and in vivo taste masking properties were studied using an electronic tongue and a human sensory panel. All formulations presented nanometric sizes around 200 nm and encapsulation efficiency above 99%. The parameters evaluated for stability remained constant throughout 90 days. The in vitro tests showed a controlled drug release and absence of toxic effects on human T lymphocytes. The electronic tongue experiment showed taste differences for all formulations in comparison to drug solutions, with a more pronounced difference for the formulation with higher polycaprolactone content (3:1). This formulation was chosen for in vivo sensory panel evaluation which results corroborated the electronic tongue experiments. In conclusion, the polymer blend nanoformulation developed herein showed the promising application to incorporate drugs aiming at pharmaceutical taste-masking properties.

Anti-HPV Nanoemulsified-Imiquimod: A New and Potent Formulation to Treat Cervical Cancer.

Cervical cancer is associated with the human papilloma virus (HPV) and nowadays is the fourth most frequent cancer among women. One of the treatments for this disease is based on the application of imiquimod. In this study, we postulated that the use of imiquimod in nanoemulsion results in a better antitumoral effect than the drug administered in its nonencapsulated form for the treatment of cervical cancer. Permeability studies using vaginal mucosa, as membrane, and in vitro studies involving cervical cancer cells (viability, clonogenic assay, and cell death analysis) were performed. We showed that low amount of encapsulated imiquimod permeated the vaginal mucosa. However, a higher percentage of cells died after the treatment with low amount (3.0 µmol L-1) of the formulation compared to the free drug. In addition, the innovative formulation presented a combinatory mechanism of cell death involving autophagy and apoptosis. Our results demonstrate that the imiquimod-loaded nanoemulsioncan be an alternative product for the treatment of cervical cancer validating the hypothesis.

Bromelain-Functionalized Multiple-Wall Lipid-Core Nanocapsules: Formulation, Chemical Structure and Antiproliferative Effect Against Human Breast Cancer Cells (MCF-7).

PURPOSE: This study was conducted a promising approach to surface functionalization developed for lipid-core nanocapsules and the merit to pursue new strategies to treat solid tumors. METHODS: Bromelain-functionalized multiple-wall lipid-core nanocapsules (Bro-MLNC-Zn) were produced by self-assembling following three steps of interfacial reactions. Physicochemical and structural characteristics, in vitro proteolytic activity (casein substrate) and antiproliferative activity (breast cancer cells, MCF-7) were determined. RESULTS: Bro-MLNC-Zn had z-average diameter of 135 nm and zeta potential of +23 mV. The complex is formed by a Zn-N chemical bond and a chelate with hydroxyl and carboxyl groups. Bromelain complexed at the nanocapsule surface maintained its proteolytic activity and showed anti-proliferative effect against human breast cancer cells (MCF-7) (72.6 ± 1.2% at 1.250 µg mL-1 and 65.5 ± 5.5% at 0.625 µg mL-1). Comparing Bro-MLNC-Zn and bromelain solution, the former needed a dose 160-folds lower than the latter for a similar effect. Tripan blue dye assay corroborated the results. CONCLUSIONS: The surface functionalization approach produced an innovative formulation having a much higher anti-proliferative effect than the bromelain solution, even though both in vitro proteolytic activity were similar, opening up a great opportunity for further studies in nanomedicine.

Production of Isotonic, Sterile, and Kinetically Stable Lipid-Core Nanocapsules for Injectable Administration.

Lipid-core nanocapsules (LNC) were designed and prepared as a colloidal system for drug targeting to improve the stability of drugs and allow their controlled release. For parenteral administration, it is necessary to ensure formulation sterility. However, sterilization of nanotechnological devices using an appropriate technique that keeps the supramolecular structure intact remains a challenge. This work aimed to evaluate the effect of autoclaving on the physicochemical characteristics of LNC. Formulations were prepared by the self-assembling method, followed by isotonization and sterilization at varying times and temperatures. The isotonicity was confirmed by determining the freezing temperature, which was -0.51°C. The formulation was broadly characterized, and the diameter of the particles was determined utilizing complementary methods. To evaluate the chemical stability of poly(ε-caprolactone), its molecular weight was determined by size exclusion chromatography. The physicochemical characteristics (average diameter, viscosity, and physical stability) of the formulation were similar before and after adding glycerol and conducting the sterilization at the highest temperature (134°C) and the shorter exposure time (10 min). After autoclaving, the sterility test was performed and showed no detectable microbial growth. Multiple light scattering demonstrated that the formulations were kinetically stable, and the mean diameter was constant for 6 months, corroborating this result. The polymer was chemically stable in the sterilized formulation. Isotonic and sterile LNC aqueous suspensions were produced using glycerol and autoclaving. Briefly, the results open an opportunity to produce an isotonic and sterile LNC aqueous dispersion applicable as nanomedicine for intravenous administration in clinical trials.

Pharmacokinetic Investigation of Quetiapine Transport across Blood-Brain Barrier Mediated by Lipid Core Nanocapsules Using Brain Microdialysis in Rats.

Lipid-core nanocapsules (LCNs) have been proposed as drug carriers to improve brain delivery by modulating drug pharmacokinetics (PK). However, it is not clear whether the LCNs carry the drug through the blood-brain barrier or increase free drug penetration due to changes in the barrier permeability. Quetiapine (QTP) penetration to the brain is mediated by influx transporters and therefore might be reduced by drug transporters inhibitiors as probenecid. The goal of this work was to investigate the role of type-III LCNs on brain penetration of QTP using microdialysis in the presence probenecid. QTP-loaded LCN (QLNC) was successfully obtained with a small particle size (143 ± 6 nm), low polydispersity index (PI < 0.1), and high encapsulation efficiency (95.4 ± 1.82%.). Total and free drug concentration in plasma and free drug concentration in brain were analyzed following i.v. bolus dosing of nonencapsulated drug (FQ) and QLNC formulations alone and in association with probenecid to male Wistar rats. QTP free plasma fraction right after administration of QLNC was smaller than the fraction observed after FQ dosing; however, it increased over time until similar free drug levels were attained, suggesting that type-III LNCs produce a short in vivo sustained release of the drug. The inhibition of influx transporters by PB led to a reduction of free QTP brain penetration, as observed by the reduction of penetration factor from 1.55 ± 0.17 to a value closer to unit (0.94 ± 0.15). However, when the drug was nanoencapsulated, the inhibition of influx transporters had no effect on the brain penetration factor (0.88 ± 0.21 to 0.92 ± 0.13) probably because QTP is loaded into LNC and not available to interact with transporters. Taken together, these results suggest that LNC type-III carried QTP in the bloodstream and delivered the drug to the brain.

Methotrexate up-regulates ecto-5'-nucleotidase/CD73 and reduces the frequency of T lymphocytes in the glioblastoma microenvironment.

Glioblastoma multiforme (GBM) is a deadly cancer characterized by a pro-tumoral immune response. T-regulatory (Treg) lymphocytes suppress effector immune cells through cytokine secretion and the adenosinergic system. Ecto-5'-nucleotidase/CD73 plays a crucial role in Treg-mediated immunosuppression in the GBM microenvironment (GME). Methotrexate (MTX) is an immunosuppressive drug that can increase the extracellular concentration of adenosine. In this manuscript, C6 GBM cells were treated with 1.0 µM MTX, and ecto-5'-nucleotidase/CD73 expression and extracellular AMP metabolism were analyzed in vitro. For in vivo studies, rats with implanted GBM were treated for 10 days with MTX-loaded lipid-core nanocapsules (MTX-LNCs, 1 mg/kg/day). The activity of ectonucleotidase and the expression of NTPDase1/CD39 and ecto-5'-nucleotidase/CD73 were measured. The frequencies of T lymphocytes (CD3(+)CD4(+), CD3(+)CD8(+), and CD4(+)CD25(high)CD39(+)) were quantified. In vitro, treatment with MTX increased CD73 expression and activity in C6 cells, which is in agreement with higher levels of extracellular adenosine. In vivo, MTX-LNC treatment increased CD39 expression on CD3(+)CD8(+) lymphocytes. In addition, MTX-LNC treatment up-regulated CD73 expression in tissue isolated from GBM, a finding that is in agreement with the higher activity of this enzyme. More specifically, the treatment increased CD73 expression on CD3(+)CD4(+) and CD3(+)CD8(+) lymphocytes. Treatment with MTX-LNCs decreased the frequencies of T-cytotoxic, T-helper, and Treg lymphocytes in the GME. Although more studies are necessary to better understand the complex cross-talk mediated by supra-physiological concentrations of adenosine in the GME, these studies demonstrate that MTX treatment increases CD73 enzyme expression and AMP hydrolysis, leading to an increase in adenosine production and immunosuppressive capability.

Lipid-Core Nanocapsules Improved Antiedematogenic Activity of Tacrolimus in Adjuvant-Induced Arthritis Model.

Despite significant technological advances, rheumatoid arthritis remains an incurable disease with great impact on the life quality of patients. We studied the encapsulation of tacrolimus in lipidcore nanocapsules (TAC-LNC) as a strategy to enhance its systemic anti-arthritic properties. TAC-LNC presented unimodal distribution of particles with z-average diameter of 212 +/- 11, drug content close to the theoretical value (0.80 mg mL(-1)), and 99.43% of encapsulation efficiency. An in vitro sustained release was determined for TAC-LNC with anomalous transport mechanism (n = 0.61). In vivo studies using an arthritis model induced by Complete Freund's Adjuvant demonstrated that the animals treated with TAC-LNC presented a significantly greater inhibition of paw oedema after intraperitoneal administration. Furthermore, the encapsulation of TAC in lipid-core nanocapsules was potentially able to prevent hyperglycemia in the animals. In conclusion, TAC-LNC was prepared with 100% yield of nanoscopic particles having satisfactory characteristics for systemic use. This formulation represents a promising strategy to the treatment of rheumatoid arthritis in the near future.

Development of an Insect Repellent Spray for Textile Based on Permethrin-Loaded Lipid-Core Nanocapsules.

The aim of this study was to prepare and characterize permethrin-loaded lipid core nanocapsules (P-LNC) in order to produce a long last insect repellent spray formulation for clothes. P-LNC were prepared by self-assembling in aqueous solution showing a mean diameter of 201 +/- 4 nm with a monomodal distribution, a permethrin content of 4.6 +/- 0.1 mg/mL and zeta potential of--16.7 +/- 4 mV. P-LNC (0.46%), as well as the commercial product (0.46%) and the hydroalcoholic solution (0.50%) of permethrin were separately sprayed onto cotton or polyester, followed by successive washes of the fabric. The results showed that the fabrics treated with P-LNC are more resistant than other solutions in terms of remaining permethrin content. After twenty washes, the cotton treated with P-LNC, presented a concentration of 566 +/- 27 mg/M2 of impregnated permethrin, while for the treatment with the substance hydroalcoholic solution and with the commercial product the concentrations values were of 340 +/- 7 mg/M2 and 224 +/- 74 mg/M2, respectively. When the test was performed using polyester, this fiber was less adhesive than cotton, resulting in a final concentration of permethrin (after 20 washes) of 81 +/- 10 mg/m2 for P-LNC suspension, 94 +/- 8 mg/M2 for the substance hydroalcoolic solution and 22 +/- 3 mg/M2 for the commercial product. After impregnating cotton with the formulations and submitting to a temperature of 200 degrees C, the P-LNC also demonstrated higher adherence compared to the other formulations (407 +/- 67 mg/m2 for P-LNC, 236 +/- 72 mg/m2 for the substance hydroalcoholic solution and 158 +/- 62 mg/m2 for commercial product). These results showed that the repellent spray composed of P-LNC developed in this work is a promising and innovative product for the individual protection against insects, useful for impregnation onto cotton garments.

Hydrogel containing adapalene- and dapsone-loaded lipid-core nanocapsules for cutaneous application: development, characterization, in vitro irritation and permeation studies.

Lipid-core polymeric nanocapsule suspensions containing adapalene and dapsone (AD-LCNC) were developed and incorporated in a Carbopol 940® hydrogel (AD-LCNC HG). A nanoemulsion (AD-NE), similarly prepared but omitting the polymer, was developed and also incorporated in a Carbopol 940® hydrogel (AD-NE HG) to evaluate the polymer effect. Physicochemical characteristics were evaluated. AD-LCNC suspensions containing 0.07% of dapsone and 0.025% of adapalene presented an average size of 194.9 ± 0.42 nm, zeta potential of -15 ± 1.2 mV and polydispersity index of 0.12 ± 0.02, using electrophoretic light scattering (n = 3). The granulometric profiles showed unimodal size distributions for AD-LCNC suspensions, demonstrating that no microscopic population is present in the formulation. No instability phenomena were observed by multiple light-scattering analysis. Photomicrographs obtained by TEM showed homogeneous- and spherical-shaped particles. The encapsulation efficiency was 99.99% for dapsone and 100% for adapalene. The pH values for AD-LCNC suspensions were 5.1 and 7.6 for AD-LCNC HG. Formulations were classified as nonirritant in the HET-CAM test. Rheological analysis demonstrated a non-Newtonian pseudoplastic profile. The in vitro skin permeation studies showed a higher amount of adapalene in epidermis (130.52 ± 25.72 ng/mg) and dermis (4.66 ± 2.5 ng/mg) for AD-NE HG. The AD-LCNC HG presented higher amount of dapsone in both the skin layers (73.91 ± 21.64 ng/mg in epidermis and 4.08 ± 0.85 ng/mg in dermis). The assay showed significant difference between AD-LCNC HG and AD-NE HG (p < 0.05), and drug was not found in the receptor medium.

Nanoencapsulation of Rose-Hip Oil Prevents Oil Oxidation and Allows Obtainment of Gel and Film Topical Formulations.

The rose-hip oil holds skin regenerating properties with applications in the dermatological and cosmetic area. Its nanoencapsulation might favor the oil stability and its incorporation into hydrophilic formulations, besides increasing the contact with the skin and prolonging its effect. The aim of the present investigation was to develop suitable rose-hip-oil-loaded nanocapsules, to verify the nanocapsule effect on the UV-induced oxidation of the oil and to obtain topical formulations by the incorporation of the nanocapsules into chitosan gel and film. The rose-hip oil (500 or 600 µL), polymer (Eudragit RS100®, 100 or 200 mg), and acetone (50 or 100 mL) contents were separately varied aiming to obtain an adequate size distribution. The results led to a combination of the factors acetone and oil. The developed formulation showed average diameter of 158 ± 6 nm with low polydispersity, pH of 5.8 ± 0.9, zeta potential of +9.8 ± 1.5 mV, rose-hip oil content of 54 ± 1 µL/mL and tendency to reversible creaming. No differences were observed in the nanocapsules properties after storage. The nanoencapsulation of rose-hip oil decreased the UVA and UVC oxidation of the oil. The chitosan gel and film containing rose-hip-oil-loaded nanocapsules showed suitable properties for cutaneous use. In conclusion, it was possible to successfully obtain rose-hip-oil-loaded nanocapsules and to confirm the nanocapsules effect in protecting the oil from the UV rays. The chitosan gel and film were considered interesting alternatives for incorporating the nanoencapsulated rose-hip oil, combining the advantages of the nanoparticles to the advantages of chitosan.

Polymeric Nanocapsules and Lipid-Core Nanocapsules Have Diverse Skin Penetration.

Biodegradable nanoparticles have been widely studied as drug carriers in order to increase drug solubility in aqueous media, modify biodistribution, target tissues and organs or control the drug release. Those nanoparticles are, in general, produced as liquid formulations to act as final dosage forms or as intermediate for solid or semi-solid products. Considering the dermatological applications, as medicines or cosmetics, different nanoparticles have been proposed to control the skin penetration of encapsulated lipophilic substances. A point rarely investigated is the penetration of the carrier itself into the skin, independent of the drug penetration profile. In this way, our objective was to correlate the flexibility of the biodegradable nanoparticles to the depth of their skin penetration. To minimize the impact of the chemical composition, the surface chemistry or the shape and size distribution on the results, two kinds of polymeric nanocapsules presenting diverse mechanical properties were produced using almost the same materials and their concentrations. The nanocapsules (NC) and the lipid-core nanocapsules (LNC) were prepared by solvent displacement using Rhodamine B-labeled polymer, oil and surfactants. The only difference in composition between them is the presence of sorbitan monostearate in the latter which was used to have a more rigid nanoparticle as previously reported. NC and LNC had, respectively, mean diameters of 178 and 180 nm and zeta potentials of -11 and -9 mV. The in vitro skin penetration was carried out using Franz cells (pig skin as membrane). Skin samples were observed by confocal laser scanning microscopy (CLSM). NC reached the dermis, while LNC was retained at the outermost layers of the skin. The result was in accordance with the flexibility previously determined for those nanocapsules, in a way that higher flexibility gives deeper penetration. NC can reach the dermis and LNC can act as reservoir systems at the epidermis.

How Sorbitan Monostearate Can Increase Drug-Loading Capacity of Lipid-Core Polymeric Nanocapsules.

Lipid-core polymeric nanocapsules are innovative devices that present distinguished characteristics due to the presence of sorbitan monostearate into the oily-core. This component acted as low-molecular-mass organic gelator for the oil (medium chain triglycerides). The organogel-structured core influenced the polymeric wall characteristics disfavoring the formation of more stable polymer crystallites. This probably occurred due to interpenetration of these pseudo-phases. Sorbitan monostearate dispersed in the oily-core was also able to interact by non-covalent bonding with the drugs increasing the drug loading capacity more than 40 times compared to conventional nanocapsules. We demonstrated that the drug-models quercetin and quercetin pentaacetate stabilized the organogel network probably due to interactions of the drug molecules with the sorbitan monostearate headgroups by hydrogen bonding.

New strategy to surface functionalization of polymeric nanoparticles: one-pot synthesis of scFv anti-LDL(-)-functionalized nanocapsules.

PURPOSE: In general, the surface functionalization of polymeric nanoparticles is carried out by covalently bounding ligands to the nanoparticle surface. This process can cause a lack or decrease of the ligand specificity to its target receptor, besides the need of purification steps. We proposed a ligand-metal-chitosan-lecithin complex as a new strategy to functionalize the surface of biodegradable nanoparticles. METHODS: One pot synthesis of scFv anti-LDL(-)-functionalized nanocapsules was carried out by self-assembly and interfacial reactions. Particle sizing techniques, lipid peroxidation and molecular recognition by enzyme linked immuno sorbent assays were carried out. RESULTS: The selected formulation had unimodal size distribution with mean diameter of about 130 nm. The metals in the complex did not enhance the oxidative stress, and the scFv anti-LDL(-)-functionalized nanocapsules recognized LDL(-) and did not react with native LDL indicating the maintenance of the active site of the fragment. CONCLUSIONS: The one pot synthesis, using the ligand-metal-chitosan-lecithin complex to functionalize the surface of the biodegradable nanocapsules, maintained the active site of the antibody fragment making the device interesting for applications in nanomedicine.

Prednisolone-loaded nanocapsules as ocular drug delivery system: development, in vitro drug release and eye toxicity.

OBJECTIVE: To develop non-toxic aqueous ocular drug delivery systems containing prednisolone by means of its nanoencapsulation. MATERIALS AND METHODS: Nanocapsules were prepared by interfacial deposition of preformed polymer [poly(ε-caprolactone) or Eudragit® RS100]. Particle size distribution was determined by laser diffractometry, photon correlation spectroscopy and nanoparticle tracking analysis. Ocular irritation and cytotoxicity were evaluated in vitro on the chorioallantoic membrane (CAM) and rabbit corneal epithelial cell line, respectively. RESULTS AND DISCUSSION: Nanocapsules showed mean particle sizes between 100 and 300 nm and prednisolone encapsulation efficiency of around 50%. Controlled release of prednisolone occurred for 5 h for both formulations according to the biexponential model. Both formulations were found to be non-irritant in the CAM test and non-cytotoxic toward rabbit corneal epithelial cells. CONCLUSIONS: Encapsulation of prednisolone in nanocapsules was reported for the first time, being suitable for producing eye drops for the treatment of ocular inflammatory and no eye toxicity was indicated.

Castor oil and mineral oil nanoemulsion: development and compatibility with a soft contact lens.

CONTEXT: The non-invasive ophthalmic therapy has a drawback: low residence time in the eye socket. Nanoparticles and contact lenses have been studied as promising ocular drug delivery systems. OBJECTIVE: To develop a nanoemulsion and evaluate its compatibility with a soft contact lens as a potential strategy for ocular delivery. MATERIALS AND METHODS: The formulations were developed by spontaneous emulsification and fully characterized. Two drops of nanoemulsion were instilled on the surface of a commercial contact lens and its transparency was measured using a UV-Vis spectrophotometer. Before and after the instillation of the drops, the morphology (scanning electron microscopy - SEM) and ion permeability of the lenses were analyzed. RESULTS: The formulations had a mean particle size of 234 nm, polydispersity below 0.16, zeta potential of -8.56 ± 3.49 mV, slightly acid pH, viscosity ≈1.2 mPa s(-1) and spherical-shaped particles. Nanoemulsion was non-irritant (hen's egg test-chorioallantoic membrane), which was confirmed by the cytotoxicity studies in the SIRC cell cultures. After instillation, SEM analysis showed nanodroplets inside and on the surface of the lenses, although their transparency remained near 100%. No significant differences were found between lens ion permeability coefficients before and after instillation. CONCLUSIONS: Formulations presented appropriate physicochemical characteristics and suitability for ocular application. The contact lens remained transparent and ion-permeable after association with the formulation.

Applying the sensory analysis in the development of chitosan hydrogel containing polymeric nanocapsules for cutaneous use.

This work aimed to develop a chitosan hydrogel containing polymeric nanocapsules with optimized sensory properties, linking the advantages of the nanocarriers, such as controlled release and protection of the substances, to the chitosan properties, such as bioadherence, cicatrizing effect, and antimicrobial activity. Sixty untrained volunteers evaluated the sensory properties of chitosan hydrogels compared to hydroxyethyl cellulose gels (Phase I) and to optimized chitosan gels (Phase II). The volunteers' preference between formulations was also evaluated. The chitosan hydrogel, despite the presence of nanocapsules, presented higher immediate stickiness and film formation on the skin, and lower acceptance than the hydroxyethyl cellulose gels. Regarding the optimized gel, decrease on the film formation and increase on the homogeneity of the film was observed, compared to the prior chitosan gel. So, the optimization of the chitosan gel led to higher acceptance by the volunteers. The presence of nanocapsules, besides increasing the chitosan gel consistence, increased the perception of film formation. For the optimized chitosan gel, the nanocapsules increased the homogeneity of the film formed on the skin, without increasing the perception of film formation. In conclusion, through sensory analysis, the formulation was optimized presenting, at the final stage, adequate sensory properties for cutaneous use.

Vitamin K1-loaded lipid-core nanocapsules: physicochemical characterization and in vitro skin permeation.

BACKGROUND: The incorporation of substances in nanocarriers can modulate and/or manage their delivery profiles (immediate or sustained) and permeation through skin. Consequently, drug nanencapsulation intended for topical treatment can reduce the systemic absorption of the substance. OBJECTIVE: To obtain and characterize vitamin K1-loaded lipid core nanocapsules as well as to determine whether the nanoencapsulation influences the skin permeation of this vitamin. METHODS: The skin permeation study was performed by means of Franz-type diffusion cells followed by the tape stripping and retention techniques. The vitamin K1-loaded lipid core nanocapsules were obtained by the preformed polymer precipitation method and the particles were characterized. RESULTS: The nanocapsules presented average diameter of 211 ± 2 nm, pH of 5.7 ± 0.3, zeta potential of -14.9 ± 0.6 mV and drug content of 10.2 mg/mL (102.1%). The physical stability of the nanocapsule suspension was verified using multiple light backscattering analysis. The amount of vitamin K1 in the dermis after 8 h of drug permeation was higher when the nanocapsules were applied compared to the control. Moreover, retention in the outermost skin layer and a decrease in the skin permeation to the receptor compartment due to the nanoencapsulation were observed. CONCLUSION: Thus, nanoencapsulation can lead to the selective permeation of vitamin K1 through the skin.

Nanotechnology-based alternatives for the topical delivery of immunosuppressive agents in psoriasis.

Psoriasis is a recurring, immune-mediated dermatological disorder. Many therapeutic agents are available for the treatment of psoriasis, including immunosuppressants and biologic treatments with immunosuppressant action. The employment of nanotechnology allows drug tailoring to achieve dermal targeting, improve efficacy and minimize undesirable effects. Here we discuss the use of the topical route in combination with nano-based drug delivery systems containing immunosuppressants for the management of psoriasis. This review is based on articles selected from 2011 to 2022, using the keywords "Psoriasis" AND "Immunosuppressants" AND "Nano*" in the main databases. Fifty-seven articles were retrieved, although only forty-two matched the inclusion criteria. Nanocarriers such as liposomes, ethosomes, niosomes, solid lipid nanoparticle, nanostructured lipid carriers and microspheres containing immunosuppressive drugs (methotrexate, cyclosporine, tacrolimus, and etanercept) were identified. The main findings of these studies are related to the improved in vitro/ex vivo permeation/penetration and therapeutic efficacy of nanoparticles in vitro and in vivo, compared to the drug in solution. Based on the studies discussed in this review, encapsulation in several types of nanocarriers decreases toxicity, dose, and dose frequency. Furthermore, it enables specific targeting of the active drug, pointing to the possibility of improving topical therapy for psoriasis. In conclusion, nanoformulations represent a novel and promising tool for psoriasis treatment.

Development and stability of innovative semisolid formulations containing nanoencapsulated lipoic acid for topical use.

INTRODUCTION: The cosmetic benefit obtained from the use of lipoic acid in the treatment of different skin disorders related to oxidative stress is compromised by its chemical instability, which complicates the preparation of cosmetic formulations suitable for topical use. Considering that nanoencapsulation increases the stability of lipoic acid, the aim of this study was to develop different semisolid formulations, based on innovative cosmetic ingredients and containing lipoic acid-loaded nanocapsules. MATERIALS AND METHODS: Lipoic acid-loaded nanocapsules (5.0 mg/mL) were prepared by interfacial deposition of the pre-formed polymer and the thickening agents Aristoflex AVC and DC RM2051, used alone or in combination. The formulations were characterized in terms of resistance to centrifugation, pH, lipoic acid content, rheological characteristics and optical parameters determined by multiple light scattering. Also, their stability when subjected to cycles of thermal heating and freezing was evaluated. RESULTS AND DISCUSSION: The semisolid formulations presented suitable properties for cutaneous administration, with enhanced physicochemical stability, considering the drug content and resistance to centrifugation, being observed for the formulations containing nanocapsules. All of the proposed formulations showed pseudoplastic flow behavior. The nanoencapsulation leads to an increase in the flow indexes. After the stress cycles an improvement in the consistency, particularly for the formulations containing nanocapsules, was observed. According to the results of multiple light scattering analysis, the formulations can be considered stable. CONCLUSIONS: The use of new cosmetic ingredients, unlike traditional hydrogels, represents a differentiated platform for preparation of stable semisolid formulations containing polymeric nanocapsules, presenting physicochemical properties suitable for topical use.

Sustained antioxidant activity of quercetin-loaded lipid-core nanocapsules.

Lipid-core nanocapsules (LNC) are vesicular nanocarriers prepared by solvent displacement. LNC have been previously prepared using medium-chain triglyceride and sorbitan monostearate as liquid and solid lipophilic components dispersed in the core, surrounded by poly(epsilon-caprolactone) (PCL). Our objective was to investigate the antioxidant activity of LNC containing quercetin (QUE), a radical scavenger, prepared with octyl methoxycinnamate and sorbitan monostearate as lipophilic core components and PCL as the polymer wall. We selected Saccharomyces cerevisae cells as the proposed biological model. QUE-LNC presented z-average diameter of 212 nm, pH of 5.51 and zeta potential of -11 mV. Multiple light scattering analysis (TurbiscanLab) showed a photon path length of 172 microm. Furthermore, a validated turbidimetric study determined that the density of particles in suspension was 1.66 x 10(13). DSC analysis showed that the melting temperature of PCL shifted to lower values when in contact with octyl methoxycinnamate indicating a molecular interaction. After 1 h (7 h), the QUE-LNC formulation and QUE solution incubated with H2O2 showed cell survival of 84.4% (87.7%) and 65.6% (7.3%), respectively. After 35 h of incubation, cell survival was 31.7% and 0.9%, respectively. The QUE-LNC showed sustained antioxidant activity and potential as a nanostructured material to formulate final products.