Characterization and Antibiofilm Activity of Mannitol-Chitosan-Blended Paste for Local Antibiotic Delivery System.

Mannitol, a polyalcohol bacterial metabolite, has been shown to activate dormant persister cells within bacterial biofilm. This study sought to evaluate an injectable blend of mannitol, chitosan, and polyethylene glycol for delivery of antibiotics and mannitol for eradication of Staphylococcal biofilm. Mannitol blends were injectable and had decreased dissociation and degradation in the enzyme lysozyme compared to blends without mannitol. Vancomycin and amikacin eluted in a burst response, with active concentrations extended to seven days compared to five days for blends without mannitol. Mannitol eluted from the paste in a burst the first day and continued through Day 4. Eluates from the mannitol pastes with and without antibiotics decreased viability of established S. aureus biofilm by up to 95.5% compared to blends without mannitol, which only decreased biofilm when loaded with antibiotics. Cytocompatibility tests indicated no adverse effects on viability of fibroblasts. In vivo evaluation of inflammatory response revealed mannitol blends scored within the 2-4 range at Week 1 (2.6 ± 1.1) and at Week 4 (3.0 ± 0.8), indicative of moderate inflammation and comparable to non-mannitol pastes (p = 0.065). Clinically, this paste could be loaded with clinician-selected antibiotics and used as an adjunctive therapy for musculoskeletal infection prevention and treatment.

Blended Chitosan Paste for Infection Prevention: Preliminary and Preclinical Evaluations.

BACKGROUND: Local drug delivery devices offer a promising method for delivering vancomycin and amikacin for musculoskeletal wounds. However, current local delivery devices such as beads and sponges do not necessarily allow for full coverage of a wound surface with eluted antibiotics and do not address the need for reducing the antibiotic diffusion distance to help prevent contamination by bacteria or other microorganisms. We blended chitosan/polyethylene glycol (PEG) pastes/sponges to increase biocompatibility and improve antibiotic coverage within the wound. QUESTIONS/PURPOSES: (1) Are blended chitosan/PEG pastes biodegradable? (2) Are the blended pastes biocompatible? (3) How much force does paste require for placement by injection? (4) Will the pastes elute active antibiotics to inhibit bacteria in vitro? (5) Can the pastes prevent infection in a preclinical model with hardware? METHODS: Our blended paste/sponge formulations (0.5% acidic, 1% acidic, and acidic/neutral) along with a control neutral 1% chitosan sponge were tested in vitro for degradability, cytocompatibility, injectability tested by determining the amount of force needed to inject the pastes, elution of antibiotics, and activity tested using zone of inhibition studies. Along with these studies, in vivo models for biocompatibility and infection prevention were tested using a rodent model and an infected mouse model with hardware, respectively. By evaluating these characteristics, an improved local drug delivery device can be determined. RESULTS: All three of the paste formulations evaluated were almost fully degraded and with 6 days of degradation, the percent remaining being was less than that of the control sponge (percent remaining: control 99.251% ± 1.0%; 0.5% acidic 1.6% ± 2.1%, p = 0.002; 1% acidic 1.7% ± 1.6%, p = 0.002; acidic/neutral 2.3% ± 1.7%, p = 0.010). There was good biocompatibility because cell viability in vitro was high (control 100.0 ± 14.3; 0.5% acidic formulation at 79.4 ± 12.6, p < 0.001; 1% acidic formulation at 98.6 ± 6.1, p = 0.993; acidic/neutral formulation at 106.7 ± 12.8, p = 0.543), and in vivo inflammation was moderate (control 2.1 ± 1.2; 0.5% acidic 3.3 ± 0.2, p = 0.530; 1% acidic 2.5 ± 0.9, p = 0.657; acidic/neutral 2.9 ± 1.1, p = 0.784). Force required to inject the 0.5% acidic and 1% acidic pastes was less than the acidic/neutral paste used as a control (control 167.7 ± 85.6; 0.5% acidic 41.3 ± 10.7, p = 0.070; 1% acidic 28.0 ± 7.0, p = 0.940). At 72 hours, all paste formulations exhibited in vitro activity against Staphylococcus aureus (control 2.6 ± 0.8; 0.5% acidic 98.1 ± 33.5, p = 0.002; 1% acidic 87.3 ± 17.2, p = 0.006; acidic/neutral 83.5 ± 14.3, p = 0.010) and Pseudomonas aeruginosa (control 163.0 ± 1.7; 0.5% acidic 85.7 ± 83.6, p = 0.373; 1% acidic 38.0 ± 45.1, p = 0.896; acidic/neutral 129.7 ± 78.0, p = 0.896). Also, the paste formulations were able to prevent the infection with 100% clearance on the implanted hardware and surrounding tissue with the control being a 0.5% acidic paste group without antibiotics (control 4 × 104 ± 4.8 × 104; 0.5% acidic 0.0 ± 0.0, p value: 0.050; 1% acidic 0.0 ± 0.0, p = 0.050; acidic/neutral 0.0 ± 0.0, p = 0.050). CONCLUSIONS: The preliminary studies demonstrated promising results for the blended chitosan/PEG pastes with antibiotics provided degradability, biocompatibility, injectability, and infection prevention for musculoskeletal-type wounds. CLINICAL RELEVANCE: The preliminary studies with the chitosan paste delivered antibiotics to a contaminated musculoskeletal wound with hardware and prevented infection. More studies in a complex musculoskeletal wound and dosage studies are needed for continued development.

Phosphatidylcholine Coatings Deliver Local Antimicrobials and Reduce Infection in a Murine Model: A Preliminary Study.

BACKGROUND: Phosphatidylcholine coatings have been shown to elute antibiotics for several days. A recently developed biofilm inhibitor, cis-2-decenoic acid (C2DA), has been shown to exhibit synergistic activity with several common antibiotics. This study aims to evaluate the effectiveness of C2DA and amikacin dual drug delivery from a phosphatidylcholine coating. QUESTIONS/PURPOSES: (1) What are the in vitro elution profiles of amikacin and C2DA from phosphatidylcholine-coated coupons in incubated phosphate-buffered saline? (2) Does the presence of C2DA in eluate samples lower the amount of amikacin needed for bacterial inhibition in overnight bacterial turbidity assays? (3) Does addition of amikacin and C2DA result in decreased colony-forming units (CFUs) on wire implants and bone when compared with phosphatidylcholine coatings alone in a mouse model of periprosthetic joint infection? METHODS: Effects of loading concentrations were assessed during 7-day in vitro elution studies for coatings containing all mixtures of 0%, 5%, 15%, and 25% wt of amikacin and C2DA (n = 4) through quantitative high-performance liquid chromatography concentration determination and plotting concentration eluted over time. Antimicrobial activity was assessed by overnight turbidity testing of elution study samples against Staphylococcus aureus or Pseudomonas aeruginosa. In vivo efficacy was assessed using phosphatidylcholine-coated wire implants in a murine (mouse) model of infection (n = 3). Wire implants were coated with phosphatidylcholine containing no antimicrobials, amikacin alone, C2DA alone, or amikacin and C2DA and then inserted into the intramedullary femur of each mouse and inoculated with S aureus. The number of viable bacterial colonies on the implant surface and in the surrounding bone was determined after 1 week with the goal of achieving complete bacterial clearance. Total viable CFU count and proportion of samples achieving complete clearance were compared between groups. RESULTS: Elution samples showed a burst response of amikacin and C2DA for 1 to 2 days with C2DA release continuing at low levels through Day 4. All tested eluate samples inhibited P aeruginosa. Samples from coatings containing 25% amikacin or 15% amikacin and any amount of C2DA were able to inhibit S aureus formation, but all coatings with 5% amikacin or 15% amikacin but no C2DA were not inhibitory. All in vivo treatment groups achieved complete bacterial clearance on the wire implant, and the C2DA alone and amikacin alone coatings cleared all CFUs in bone (pin: phosphatidylcholine only one of three; amikacin three of three, C2DA three of three, amikacin + C2DA three of three, p = 0.04 [Fisher's exact test]; bone: coating only: zero of three; amikacin: three of three; C2DA; three of three; C2DA + amikacin: one of three; p = 0.03 [Fisher's exact test]). CONCLUSIONS: Phosphatidylcholine coatings elute antimicrobials in vitro under infinite sink conditions for up to 4 days in phosphate-buffered saline and were able to reduce bacterial colonies in a preliminary in vivo model. Turbidity testing with eluate samples containing varying amounts of C2DA and amikacin agrees with previous studies showing synergy between them. CLINICAL RELEVANCE: Used as an adjunctive to systemic therapy, C2DA-loaded phosphatidylcholine coatings have potential value as a prophylactic infection prevention measure. Future studies may include different antibiotics, animal studies with larger sample sizes and more controls, and advanced coating delivery methods.

Novel Antibiotic-loaded Point-of-care Implant Coating Inhibits Biofilm.

BACKGROUND: Orthopaedic biomaterials are susceptible to biofilm formation. A novel lipid-based material has been developed that may be loaded with antibiotics and applied as an implant coating at point of care. However, this material has not been evaluated for antibiotic elution, biofilm inhibition, or in vivo efficacy. QUESTIONS/PURPOSES: (1) Do antibiotic-loaded coatings inhibit biofilm formation? (2) Is the coating effective in preventing biofilm in vivo? METHODS: Purified phosphatidylcholine was mixed with 25% amikacin or vancomycin or a combination of 12.5% of both. A 7-day elution study for coated titanium and stainless steel coupons was followed by turbidity and zone of inhibition assays against Staphylococcus aureus and Pseudomonas aeruginosa. Coupons were inoculated with bacteria and incubated 24 hours (N = 4 for each test group). Microscopic images of biofilm were obtained. After washing and vortexing, attached bacteria were counted. A mouse biofilm model was modified to include coated and uncoated stainless steel wires inserted into the lumens of catheters inoculated with a mixture of S aureus or P aeruginosa. Colony-forming unit counts (N = 10) and scanning electron microscopy imaging of implants were used to determine antimicrobial activity. RESULTS: Active antibiotics with colony inhibition effects were eluted for up to 6 days. Antibiotic-loaded coatings inhibited biofilm formation on in vitro coupons (log-fold reductions of 4.3 ± 0.4 in S aureus and 3.1 ± 0 for P aeruginosa in phosphatidylcholine-only coatings, 5.6 ± 0 for S aureus and 3.1 ± 0 for P aeruginosa for combination-loaded coatings, 5.5 ± 0.3 for S aureus in vancomycin-loaded coatings, and 3.1 ± 0 for P aeruginosa for amikacin-loaded coatings (p < 0.001 for all comparisons of antibiotic-loaded coatings against uncoated controls for both bacterial strains, p < 0.001 for comparison of antibiotic-loaded coatings against phosphatidylcholine only for S aureus, p = 0.54 for comparison of vancomycin versus combination coating in S aureus, P = 0.99 for comparison of antibiotic- and unloaded phosphatidylcholine coatings in P aeruginosa). Similarly, antibiotic-loaded coatings reduced attachment of bacteria to wires in vivo (log-fold reduction of 2.54 ± 0; p < 0.001 for S aureus and 0.83 ± 0.3; p = 0.112 for P aeruginosa). CONCLUSIONS: Coatings deliver active antibiotics locally to inhibit biofilm formation and bacterial growth in vivo. Future evaluations will include orthopaedic preclinical models to confirm therapeutic efficacy. CLINICAL RELEVANCE: Clinical applications of local drug delivery coating could reduce the rate of implant-associated infections.

Composite chitosan and calcium sulfate scaffold for dual delivery of vancomycin and recombinant human bone morphogenetic protein-2.

A biodegradable, composite bone graft, composed of chitosan microspheres embedded in calcium sulfate, was evaluated in vitro for point-of-care loading and delivery of antibiotics and growth factors to prevent infection and stimulate healing in large bone injuries. Microspheres were loaded with rhBMP-2 or vancomycin prior to mixing into calcium sulfate loaded with vancomycin. Composites were evaluated for set time, drug release kinetics, and bacteriostatic/bactericidal activity of released vancomycin, induction of ALP expression by released rhBMP-2, and interaction of drugs on cells. Results showed the composite set in under 36 min and released vancomycin levels that were bactericidal to S. aureus (>MIC 8-16 µg/mL) for 18 days. Composites exhibited a 1 day-delayed release, followed by a continuous release of rhBMP-2 over 6 weeks; ranging from 0.06 to 1.49 ng/mL, and showed a dose dependent release based on initial loading. Released rhBMP-2 levels were, however, too low to induce detectable levels of ALP in W20-17 cells, due to the affinity of rhBMP-2 for calcium-based materials. With stimulating amounts of rhBMP-2 (>50 ng/mL), the ALP response from W-20-17 cells was inhibited when exposed to high vancomycin levels (1,800-3,600 µg/mL). This dual-delivery system is an attractive alternative to single delivery or preloaded systems for bone regeneration since it can simultaneously fight infection and deliver a potent growth factor. Additionally, this composite can accommodate a wide range of therapeutics and thus be customizable for specific patient needs, however, the potential interactive effects of multiple agents must be investigated to ensure that functional activity is not altered.

A daptomycin-xylitol-loaded polymethylmethacrylate bone cement: how much xylitol should be used?

BACKGROUND: The rate of release of an antibiotic from an antibiotic-loaded polymethylmethacrylate (PMMA) bone cement is low. This may be increased by adding a particulate poragen (eg, xylitol) to the cement powder. However, the appropriate poragen amount is unclear. QUESTIONS/PURPOSES: We explored the appropriate amount of xylitol to use in a PMMA bone cement loaded with daptomycin and xylitol. METHODS: We prepared four groups of cement, each comprising the same amount of daptomycin in the powder (1.36 g/40 g dry powder) but different amounts of xylitol (0, 0.7, 1.4, and 2.7 g); the xylitol mass ratio (X) (mass divided by mass of the final dry cement-daptomycin-xylitol mixture) ranged from 0 to 6.13 wt/wt%. Eight mechanical, antibiotic release, and bacterial inhibitory properties were determined using three to 22 specimens or replicates per test. We then used an optimization method to determine an appropriate value of X by (1) identifying the best-fit relationship between the value of each property and X, (2) defining a master objective function incorporating all of the best fits; and (3) determining the value of X at the maximum master objective function. RESULTS: We found an appropriate xylitol amount to be 4.46 wt/wt% (equivalent to 1.93 g xylitol mixed with 1.36 g daptomycin and 40 g dry cement powder). CONCLUSIONS: We demonstrated a method that may be used to determine an appropriate xylitol amount for a daptomycin-xylitol-loaded PMMA bone cement. These findings will require in vivo confirmation. CLINICAL RELEVANCE: While we identified an appropriate amount of xylitol in a daptomycin-xylitol-loaded PMMA bone cement as a prophylactic agent in total joint arthroplasties, clinical evaluations are needed to confirm the effectiveness of this cement.

Chitosan sponges for local synergistic infection therapy: a pilot study.

BACKGROUND: Although bacterial antibiotic resistance is increasing, fewer new antibiotics are being developed to compensate. Localized delivery of synergistic antiseptics and antibiotics with a chitosan sponge device may offer an alternative infection treatment. QUESTIONS/PURPOSES: In this pilot study, we asked whether antiseptic and antibiotic combinations provided in vitro synergism against Staphylococcus aureus, whether synergism reduces cell viability, and whether their combination releases drugs at inhibitory levels. METHODS: To investigate the pharmacodynamics among three combinations of the antiseptic chlorhexidine digluconate (CHX) with the antibiotics amikacin, daptomycin, and vancomycin (VAN) (n=1), we determined the fractional inhibitory concentration (FIC) index against S aureus Cowan I. The determined synergistic combination of CHX and VAN was evaluated for cell compatibility using NIH/3T3 fibroblasts (n=3) and the drug release profile from a chitosan sponge device (n=5). RESULTS: With an FIC index<0.5, the combination of CHX+VAN exhibited synergism against S aureus. CHX concentrations≥3.91 µg/mL resulted in fibroblast viability decrease, whereas the combination of CHX+VAN did not decrease fibroblast viability until their concentrations reached ≥7.81 µg/mL. The CHX and VAN release profile, both individually and in combination, was an initial bolus with no difference between eluate concentrations after Day 5. CONCLUSIONS: CHX+VAN combination may be delivered locally by a chitosan sponge that synergistically inhibits S aureus growth. CLINICAL RELEVANCE: The use of synergism between combined antibiotic and antiseptics delivered at high local concentrations with an implanted chitosan sponge may provide a useful alternative infection treatment option.

Use of xylitol to enhance the therapeutic efficacy of polymethylmethacrylate-based antibiotic therapy in treatment of chronic osteomyelitis.

Using a rabbit model of postsurgical osteomyelitis, we demonstrate that incorporation of xylitol into polymethylmethacrylate (PMMA) bone cement enhances the elution of daptomycin under in vivo conditions. We also demonstrate that this can be correlated with an improved therapeutic outcome in the treatment of a chronic bone infection following surgical debridement.

Cis-2-decenoic acid inhibits S. aureus growth and biofilm in vitro: a pilot study.

BACKGROUND: Cis-2 decenoic acid (C2DA) disperses biofilm in many strains of microorganisms. However, whether C2DA inhibits bacterial growth or has potential to boost the actions of antibiotics is unknown. QUESTIONS/PURPOSES: We asked whether (1) C2DA inhibited MRSA growth and biofilm, (2) antibiotics increased inhibitory effects, (3) inhibitory concentrations of C2DA were cytotoxic to human cells, and (4) effective concentrations could be delivered from a chitosan sponge drug delivery device. METHODS: Broth containing seven concentrations of C2DA and six concentrations of either daptomycin, vancomycin, or linezolid was inoculated with a clinical isolate of MRSA and added to a total of 504 coated microtiter plate wells in triplicate (n = 3) for turbidity bacterial growth and crystal violet biofilm mass quantification. We used fibroblast cell viability assays of six C2DA concentrations (n = 4) to evaluate preliminary biocompatibility. We measured the elution of C2DA from a chitosan sponge drug delivery device with two representative loading concentrations (n = 3). RESULTS: C2DA at concentrations of 500 µg/mL and above inhibited growth, while 125 µg/mL C2DA inhibited biofilm. Combination with antibiotics increased these effects. At concentrations up to 500 µg/mL, there were no cytotoxic effects on fibroblasts. Chitosan sponges loaded with 100 mg of C2DA eluted concentrations at or above biofilm-inhibitory concentrations for 5 days. CONCLUSIONS: C2DA inhibited biofilm formation by MRSA at biocompatible concentrations, with increasing biofilm reduction with added antibiotics. Elution of C2DA from a chitosan sponge can be modified through adjusting loading concentration. CLINICAL RELEVANCE: By inhibiting biofilm formation on implant surfaces, C2DA may reduce the number of infections in musculoskeletal trauma.

Hematoma-inspired alginate/platelet releasate/CaPO4 composite: initiation of the inflammatory-mediated response associated with fracture repair in vitro and ex vivo injection delivery.

A clinical need continues for consistent bone remodeling within problematic sites such as those of fracture nonunion, avascular necrosis, or irregular bone formations. In attempt to address such needs, a biomaterial system is proposed to induce early inflammatory responses after implantation and to provide later osteoconductive scaffolding for bone regeneration. Biomaterial-induced inflammation would parallel the early stage of hematoma-induced fracture repair and allow scaffold-promoted remodeling of osseous tissue to a healthy state. Initiation of the wound healing cascade by two human concentrated platelet releasate-containing alginate/ß-tricalcium phosphate biocomposites has been studied in vitro using the TIB-71™ RAW264.7 mouse monocyte cell line. Inflammatory responses inherent to the base material were found and could be modulated through incorporation of platelet releasate. Differences in hydrogel wt% (2 vs. 8 %) and/or calcium phosphate granule vol.% (20 vs. 10 %) allowed for tuning the response associated with platelet releasate-associated growth factor elution. Tunability from completely suppressing the inflammatory response to augmenting the response was observed through varied elution profiles of both releasate-derived bioagents and impurities inherent to alginate. A 2.5-fold upregulation of inducible-nitric oxide synthase gene expression followed by a tenfold increase in nitrite media levels was induced by inclusion of releasate within the 8 wt%/10 vol.% formulation and was comparable to an endotoxin positive control. Whereas, near complete elimination of inflammation was seen when releasate was included within the 2 wt%/20 vol.% formulation. These in vitro results suggested tunable interactions between the multiple platelet releasate-derived bioagents and the biocomposites for enhancing hematoma-like fracture repair. Additionally, minimally invasive delivery for in situ curing of the implant system via injection was demonstrated in rat tail vertebrae using microcomputed tomography.

Evaluation of two sources of calcium sulfate for a local drug delivery system: a pilot study.

BACKGROUND: Local drug delivery has substantial potential to prevent infections compared with systemic delivery. Although calcium sulfate (CaSO(4)) has been studied for local drug delivery and two types are commercially available, it is unknown whether they differentially release antibiotics. QUESTIONS/PURPOSES: We determined the differences between two sources of CaSO(4) and the K(2)SO(4) catalyst's presence on the degradation, daptomycin elution, and activity against Staphylococcus aureus. METHODS: We formed pellets from synthetic and naturally sourced (from gypsum) CaSO(4) and loaded with 5% daptomycin and 3% or 0% K(2)SO(4). We used in vitro experiments to determine the daptomycin concentration and degradation profiles over 10 days. Turbidity assays were used to evaluate the activity of the daptomycin eluates against S. aureus. RESULTS: All pellets exhibited a bolus release with the highest daptomycin concentration on Day 1 with the sourced CaSO(4) pellets. The synthetic CaSO(4) pellets with 3% K(2)SO(4) exhibited a slower drug release compared with the synthetic CaSO(4) pellets with 0% K(2)SO(4), which degraded and eluted daptomycin too quickly to inhibit S. aureus. Turbidity assays demonstrated that all CaSO(4) pellets inhibit S. aureus for expected lengths of time. CONCLUSIONS: Our preliminary in vitro data suggest differences in the degradation, elution, and activity properties between sourced and synthetic CaSO(4) pellets. The addition of K(2)SO(4) appeared beneficial when using synthetic CaSO(4). Synthetic CaSO(4) may be effective when slow degradation and longer elution times are needed. CLINICAL RELEVANCE: Local delivery of eluted daptomycin can be tailored through material selection and K(2)SO(4) addition.

Chitosan coatings deliver antimicrobials from titanium implants: a preliminary study.

OBJECTIVE: Chitosan was investigated as a coating for local delivery of antimicrobials for prevention of acute implant infection. The objectives of this study were to (1) measure the release of 2 antimicrobials from chitosan coatings, (2) determine efficacy of eluted antimicrobials against bacteria, in vitro, and (3) evaluate toxicity of eluted drugs to host cells/tissues. METHODS: Chitosan coatings (80.7% deacetylated, 108 kDa) containing 20% tetracycline or 0.02% chlorhexidine digluconate were bonded to titanium via silane reactions. After elution in culture medium for 7 days, eluates were tested against model pathogens Actinobacillus actinomycetemcomitans and Staphylococcus epidermidis in turbidity tests and in 24-hour cytotoxicity tests using human osteoblasts and fibroblasts. Finally, antibiotic-loaded chitosan-coated titanium pins were implanted for 7 days in muscle of Sprague-Dawley rats to evaluate the initial tissue response. RESULTS: Coatings released 89% of tetracycline in 7 days and 100% chlorhexidine in 2 days. Released tetracycline inhibited growth (95%-99.9%) of pathogens for up to 7 days with no cytotoxicity to human cells. Released chlorhexidine was active against pathogens for 1 to 2 days (56%-99.5% inhibition) but was toxic to cells on the first day of elution. Typical acute inflammatory response was observed to antimicrobial-loaded chitosan coatings similar to unloaded coatings. CONCLUSION: These preliminary data support the hypothesis that chitosan coatings have the potential to locally deliver antimicrobials to inhibit bacteria without being toxic to host cells/tissues and warrant additional studies to evaluate the ability of the coatings to prevent/resist infection and promote osseointegration.

Staphylococcal infection prevention using antibiotic-loaded mannitol-chitosan paste in a rabbit model of implant-associated osteomyelitis.

Antibiotic-loaded chitosan pastes have shown advantages in the treatment and coverage of complex musculoskeletal defects. We added mannitol, previously shown to increase antibiotic susceptibility of biofilm, to an injectable chitosan/polyethylene glycol paste for delivery of antibiotics. Ground sponges (0.85% acetic acid solution, 1% chitosan, 0% or 2% mannitol, 1% polyethylene glycol) were hydrated using phosphate-buffered saline with 10 mg/ml amikacin and 10 mg/ml vancomycin added to form pastes. We inoculated rabbit radial defects with 105 colony-forming units of Staphylococcus aureus (UAMS-1) and inserted titanium pins into the cortical bone. Groups compared included mannitol blend pastes, non-mannitol blends, antibiotic-loaded bone cement, vancomycin powder, and no treatment controls. We harvested tissue samples and retrieved the pins retrieved at 3 weeks. All antibiotic-loaded groups lowered bacterial growth and colony-forming unit counts in soft and bone tissue and on titanium pins in in vivo studies. The results indicate this biomaterial is capable of eluting active antibiotics at concentrations that reduce bacterial growth on biomaterials and tissue, which, in turn, may prevent biofilm formation. Blends of chitosan and mannitol may be useful in prevention and treatment of osteomyelitis and implant-associated infections.

An Approach for determining antibiotic loading for a physician-directed antibiotic-loaded PMMA bone cement formulation.

BACKGROUND: When a physician-directed antibiotic-loaded polymethylmethacrylate (PMMA) bone cement (ALBC) formulation is used in total hip arthroplasties (THAs) and total knee arthroplasties (TKAs), current practice in the United States involves arbitrary choice of the antibiotic loading (herein defined as the ratio of the mass of the antibiotic added to the mass of the cement powder). We suggest there is a need to develop a rational method for determining this loading. QUESTIONS/PURPOSES: We propose a new method for determining the antibiotic loading to use when preparing a physician-directed ALBC formulation and illustrate this method using three in vitro properties of an ALBC in which the antibiotic was daptomycin. MATERIALS AND METHODS: Daptomycin was blended with the powder of the cement using a mechanical mixer. We performed fatigue, elution, and activity tests on three sets of specimens having daptomycin loadings of 2.25, 4.50, and 11.00 wt/wt%. Correlational analyses of the results of these tests were used in conjunction with stated constraints and a nonlinear optimization method to determine the daptomycin loading to use. RESULTS: With an increase in daptomycin loading, the estimated mean fatigue limit of the cement decreased, the estimated elution rate of the antibiotic increased, and the percentage inhibition of staphylococcal growth by the eluate remained unchanged at 100%. For a daptomycin-loaded PMMA bone cement we computed the optimum amount of daptomycin to mechanically blend with 40 g of cement powder is 1.36 g. CONCLUSIONS: We suggest an approach that may be used to determine the amount of antibiotic to blend with the powder of a PMMA bone cement when preparing a physician-directed ALBC formulation, and highlighted the attractions and limitations of this approach. CLINICAL RELEVANCE: When a physician-directed ALBC formulation is selected for use in a TKA or THA, the approach we detail may be employed to determine the antibiotic loading to use rather than the empirical approach that is taken in current clinical practice.

Chitosan sponges to locally deliver amikacin and vancomycin: a pilot in vitro evaluation.

BACKGROUND: Open orthopaedic wounds are ideal sites for infection. Preventing infection in these wounds is critical for reducing patient morbidity and mortality, controlling antimicrobial resistance and lowering the cost of treatment. Localized drug delivery has the potential to overcome the challenges associated with traditional systemic dosing. A degradable, biocompatible polymer sponge (chitosan) that can be loaded with clinician-selected antibiotics at the point of care would provide the patient and clinician with a desirable, adjunctive preventive modality. QUESTIONS/PURPOSES: We asked (1) if an adaptable, porous chitosan matrix could absorb and elute antibiotics for 72 hours for potential use as an adjunctive therapy to débridement and lavage; and (2) if the sponges could elute levels of antibiotic that would inhibit growth of Staphylococcus aureus and Pseudomonas aeruginosa? METHODS: We fabricated a degradable chitosan sponge that can be loaded with antibiotics during a 60-second hydration in drug-containing solution. In vitro evaluation determined amikacin and vancomycin release from chitosan sponges at six time points. Activity tests were used to assess the release of inhibitory levels of amikacin and vancomycin. RESULTS: Amikacin concentration was 881.5 microg/mL after 1 hour with a gradual decline to 13.9 microg/mL after 72 hours. Vancomycin concentration was 1007.4 microg/mL after 1 hour with a decrease to 48.1 microg/mL after 72 hours. Zone of inhibition tests were used to verify inhibitory levels of drug release from chitosan sponges. A turbidity assay testing activity of released amikacin and vancomycin indicated inhibitory levels of elution from the chitosan sponge. CLINICAL RELEVANCE: Chitosan sponges may provide a potential local drug delivery device for preventing musculoskeletal infections.

Optimized elution of daptomycin from polymethylmethacrylate beads.

We demonstrate that xylitol can be added to polymethylmethacrylate (PMMA) bone cement to enhance the elution of daptomycin in terms of both the peak and sustained release of antibiotic. We also demonstrate that a PMMA-xylitol formulation optimized for daptomycin can be used to enhance the elution of both vancomycin and gentamicin.

Characterization of trimethyl chitosan/polyethylene glycol derivatized chitosan blend as an injectable and degradable antimicrobial delivery system.

Advanced local delivery systems are needed as adjunctive treatments for severe injuries with high infection rates, such as open fractures. Chitosan systems have been investigated as antimicrobial local delivery systems for orthopaedic infection but possess mismatches between elution and degradation properties. Derivatives of chitosan were chosen that have enhanced swelling ratios or tailorable degradation properties. A combination of trimethyl chitosan and poly(ethylene glycol) diacrylate chitosan was developed as an injectable local delivery system. Research objectives were elution of antimicrobials for 7 days, degradation as open fractures heal, and cytocompatibility. The derivative combination eluted increased active concentrations of vancomycin and amikacin compared to the non-derivatized chitosan paste, 6 vs. 5 days and 5 vs. 4 days, respectively. The derivative combination degraded slower than non-derivatized paste in an enzymatic degradation study, 14 vs. 3 days, which increased antimicrobial delivery duration. Cytocompatibility of the combination with fibroblast and pre-osteoblast cells exceeds the cell viability standard set in ISO 10993-5. Combination paste requires an increased ejection force of 9.40 N (vs. 0.64 N), but this force was within an acceptable injection force threshold, 80 N. These preliminary results indicate combination paste should be further developed into a clinically useful adjunctive local delivery system for infection prevention.

Chitosan films: a potential local drug delivery system for antibiotics.

Local antibiotic delivery is an emerging area of study designed to provide alternative methods of treatment to clinicians for compromised wound sites where avascular zones can prevent the delivery of antibiotics to the infected tissue. Antibiotic-loaded bone cement is the gold standard for drug-eluting local delivery devices but is not ideal because it requires a removal surgery. Chitosan is a biocompatible, biodegradable polymer that has been used in several different drug delivery applications. We evaluated chitosan as a potential localized drug delivery device. We specifically determined if chitosan could elute antibiotics in an active form that would be efficacious in inhibiting S. aureus growth. Elution of amikacin was 24.67 +/- 2.35 microg/mL (85.68%) after 1 hour with a final cumulative release of 27.31 +/- 2.86 microg/mL (96.23%) after 72 hours. Elution of daptomycin was 10.17 +/- 3.83 microg/mL after 1 hour (31.61% release) and 28.72 +/- 6.80 microg/mL after 72 hours (88.55%). The data from the elution study suggested effective release of amikacin and daptomycin. The activity studies indicated the eluants inhibited the growth of S. aureus. Incorporating antibiotics in chitosan could provide alternative methods of treating musculoskeletal infections.

Chitosan-coated stainless steel screws for fixation in contaminated fractures.

Stainless steel screws and other internal fixation devices are used routinely to stabilize bacteria-contaminated bone fractures from multiple injury mechanisms. In this preliminary study, we hypothesize that a chitosan coating either unloaded or loaded with an antibiotic, gentamicin, could lessen or prevent these devices from becoming an initial nidus for infection. The questions investigated for this hypothesis were: (1) how much of the sterilized coating remains on the screw with simulated functional use; (2) is the unloaded or loaded chitosan coating bacteriostatic and biocompatible; and (3) what amount and rate does an antibiotic elute from the coating? In this study, the gentamicin eluted from the coating at a detectable level during 72 to 96 hours. The coating was retained at the 90% level in simulated bone screw fixation and the unloaded and loaded chitosan coatings had encouraging in vitro biocompatibility with fibroblasts and stem cells and were bacteriostatic against at least one strain of Staphylococcus aureus. The use of an antibiotic-loaded chitosan coating on stainless steel bone screws and internal fixation devices in contaminated bone fracture fixation may be considered after optimization of antibiotic loading and elution and more expanded in vitro and in vivo investigations with other organisms and antibiotics.

Daptomycin eluted from calcium sulfate appears effective against Staphylococcus.

The emergence of resistant strains of Gram-positive organisms in osteomyelitis creates treatment challenges. Daptomycin is an antibiotic that shows promise for treating some resistant strains of Gram-positive infections; however, it has not been widely used clinically for the treatment of osteomyelitis. We determined whether daptomycin eluted from calcium sulfate-a local delivery vehicle used for the treatment of osteomyelitis-retained activity against Gram-positive bacteria. Daptomycin was mixed with calcium sulfate hemihydrate, with both laboratory powder and a commercial kit, to form a hardened pellet. Daptomycin was eluted from calcium sulfate and retained its ability to inhibit bacterial growth of Staphylococcus aureus and Staphylococcus epidermidis for eluates gathered up to 28 days. Our preliminary data demonstrates sterilized pellets with daptomycin retained their ability to inhibit bacterial growth of certain strains of Gram-positive organisms.