Borane-Pyridine: An Efficient Catalyst for Direct Amidation.

Borane-pyridine acts as an efficient (5 mol%) liquid catalyst, providing improved solubility for the direct amidation of a wide range of aromatic and aliphatic carboxylic acids and amines to form secondary and tertiary carboxamides. Tolerance of potentially incompatible halo, nitro, and alkene functionalities has been demonstrated.

Dehydroborylation of Terminal Alkynes Using Lithium Aminoborohydrides.

Dehydrogenative borylation of terminal alkynes has recently emerged as an atom-economical one-step alternative to traditional alkyne borylation methodologies. Using lithium aminoborohydrides, formed in situ from the corresponding amine-boranes and n-butyllithium, a variety of aromatic and aliphatic terminal alkyne substrates were successfully borylated in high yield. The potential to form mono-, di-, and tri-B-alkynylated products has been shown, though the mono-product is primarily generated using the presented condition. The reaction has been demonstrated at large (up to 50 mmol) scale, and the products are stable to column chromatography as well as acidic and basic aqueous conditions. Alternately, the dehydroborylation can be achieved by treating alkynyllithiums with amine-boranes. In that respect, aldehydes can act as starting materials by conversion to the 1,1-dibromoolefin and in situ rearrangement to the lithium acetylide.

TiCl4-Catalyzed Hydroboration of Ketones with Ammonia Borane.

Investigation of a variety of Lewis acids for the hydroboration-hydrolysis (reduction) of ketones with amine-boranes has revealed that catalytic (10 mol %) titanium tetrachloride (TiCl4) in diethyl ether at room temperature immensely accelerates the reaction of ammonia borane. The product alcohols are produced in good to excellent yields within 30 min, even with ketones which typically requires 24 h or longer to reduce under uncatalyzed conditions. Several potentially reactive functionalities are tolerated, and substituted cycloalkanones are reduced diastereoselectively to the thermodynamic product. A deuterium labeling study and 11B NMR analysis of the reaction have been performed to verify the proposed hydroboration mechanism.

ß,γ-Diaryl α-methylene-γ-butyrolactones as potent antibacterials against methicillin-resistant Staphylococcus aureus.

A selected series of racemic α-methylene-γ-butyrolactones (AMGBL) synthesized via allylboration or allylindation reactions were screened against methicillin-resistant Staphylococcus aureus (MRSA) USA300. Unlike natural AMGBLs, such as parthenolide, synthetic analogs bearing aryl moieties at the ß- and γ-positions are potent against MRSA. The most potent molecules were comparable to vancomycin and linezolid, the drugs of the last resort for MRSA infections, in their effectiveness with minimum inhibitory concentrations (MICs) ranging from 3.0 to 5.2 µM. These lactones also exhibited potent antibacterial activity against other clinically important multidrug-resistant Gram-positive bacteria (except enterococci), while also showing high tolerability to mammalian cells. Several of these molecules surpassed vancomycin in their rapid killing of the high MRSA inoculum (2 h vs 12 h) in a standard time-kill kinetics assay, with compounds 1l and 1m significantly reducing the intracellular burden of MRSA by about 98-99%, at low concentrations. Additionally, the compounds surpassed vancomycin in inhibiting staphylococcal protease production, indicating that synthetic methylene lactones warrant further investigations as promising anti-MRSA candidates.

Stain removal effect of novel papain- and bromelain-containing gels applied to enamel.

OBJECTIVES: The aims of the study are to prepare novel stain removal gel-based formulations containing papain or bromelain and to investigate their stain removal effect when applied to enamel. MATERIALS AND METHODS: Experimental bromelain- and papain-based stain removal gels were prepared. Next, enamel/dentin tooth samples (6 × 6 mm2, 4 mm in thickness) were obtained from bovine teeth, stained in coffee solution for 1 week, and measured with a digital spectrophotometer (Easyshade, Vita Zahnfabrik) for color assessment (baseline). The samples were then randomly allocated into four groups (n = 7), according to the stain removal agent applied: ContrastPM+ (Discus Dental, LLC), which is based on 20 wt.% carbamide peroxide (positive control); bromelain-based; papain-based; and no agent (negative control). The materials were applied once a week, three times per day, during 4 weeks, and following the directions of use from positive control. The samples were measured again with the Easyshade and using the CIEL * a * b * color system. The color change (ΔE *) results were obtained by subtracting the baseline values from the final color values obtained at each time point. The data were statistically analyzed using two-way repeated-measures analysis of variance and Student Newman Keuls's test as a post hoc test (α = 5 %). RESULTS: All stain removal agents produced greater color change than the negative control (p < .001), with the positive control demonstrating greater ΔE * values when compared to the experimental gels (p ≤ .004). The second application of all gels resulted in greater ΔE * values compared to the first application (p ≤ .025), although no color change was observed after the third application (p ≥ .051), regardless of the material evaluated. CLINICAL SIGNIFICANCE: The proposed gels containing proteolytic enzymes (bromelain or papain) of vegetal origin may hold significant clinical potential as active agents for the preparation of stain removal agents free of hydrogen/carbamide peroxide.

Aryl carbonyls and carbinols as proelectrophiles for Friedel-Crafts benzylation and alkylation.

Friedel-Crafts benzylation/alkylation using benzylic, tertiary, and homobenzylic alcohols; aryl aldehydes, aryl ketones, and the highly challenging aryl carboxylic acids and esters as proelectrophiles has been achieved using borane-ammonia and TiCl4, greatly broadening the scope of useable substrates. Incorporation of deactivated aromatic proelectrophiles and specificity for substitution at the benzylic position are demonstrated in the synthesis of various di- and triarylalkane products. Dual protocols allow for the use of standard nucleophilic solvents (benzene, toluene, etc.) or for stoichiometric addition of more valuable nucleophiles including furans, thiophenes, and benzodioxoles.

TiF4-mediated, one-pot, reductive amination of carboxylic acids with borane-ammonia.

A facile one-pot, two-step, reductive alkylation of amines with carboxylic acids has been achieved with BH3-NH3 as an air- and moisture-stable reductant in the presence of TiF4. The catalyst is effective for both amidation and reduction steps, and the product amines are isolated in high yields as either the free amines, for those products containing an arylamine, or the borane-complexes. The free amine can be separated from these complexes using BF3-Et2O, followed by hydrolysis. The amide reduction has been demonstrated for primary, secondary, and tertiary amides, as well as lactams, and the reductive amination is applicable to a wide variety of aromatic and aliphatic acids as well as amines.

Catalyst- and Stoichiometry-Dependent Deoxygenative Reduction of Esters to Ethers or Alcohols with Borane-Ammonia.

A facile and selective room temperature deoxygenation of both aromatic and aliphatic carboxylic esters to ethers has been achieved by regulating the stoichiometry of the reductant, BH3-NH3, and the catalyst, TiCl4. This first, practical borane-mediated process is compatible with various potentially sensitive functional groups and is applicable to the deoxygenative ether formation from typically challenging aromatic acid esters. Substituting BF3-Et2O as the catalyst alters the reaction pathway, reducing the esters to alcohols. Mechanistic insights are provided by NMR spectroscopy, deuterium labeling, and kinetic isotope studies.

Balancing Lewis Acidity and Carbocation Stability for the Selective Deoxyhalogenation of Aryl Carbonyls and Carbinols.

Deoxyhalogenation of aryl aldehydes, ketones, carboxylic acids, and esters has been achieved utilizing an appropriate metal halide Lewis acid acting as a carbonyl activator and halogen carrier in combination with borane-ammonia as the reductant. Selectivity is accomplished by matching the stability of the carbocation intermediate with the effective acidity of the Lewis acid. Substituents and substitution patterns significantly influence the requisite solvent/Lewis acid combination. Logical combinations of these factors have also been applied for the regioselective conversion of alcohols to alkyl halides.

Aminoboranes via Tandem Iodination/Dehydroiodination for One-Pot Borylation.

A rapid synthesis of aminoboranes from amine-boranes utilizing an iodination/dehydroiodination sequence is described. Monomeric aminoboranes are generated exclusively from several substrate adducts, following an E2-type elimination, with the added base playing a critical role in monomer vs dimer formation. Diisopropylaminoborane formed using this methodology has been applied to a one-pot palladium-catalyzed conversion of iodo- and bromoarenes to the corresponding boronates. Additionally, modification of the workup allows for isolation of the boronic acid and recovery of the utilized amine.

A Safer Reduction of Carboxylic Acids with Titanium Catalysis.

Ammonia-borane, shown previously to react with carboxylic acids under reflux to form primary amides, reduces acids to alcohols at room temperature in the presence of catalytic TiCl4. The process, which is tolerant of a variety of potentially reactive functional groups, including N-protected amino acids, can be employed for the selective reduction of acids in the presence of amides, nitriles and, to some extent, esters. Aliphatic acids can be selectively reduced in the presence of aromatic acids.

Activation of sodium borohydride via carbonyl reduction for the synthesis of amine- and phosphine-boranes.

A highly versatile synthesis of amine-boranes via carbonyl reduction by sodium borohydride is described. Unlike the prior bicarbonate-mediated protocol, which proceeds via a salt metathesis reaction, the carbon dioxide-mediated synthesis proceeds via reduction to a monoformatoborohydride intermediate. This has been verified by spectroscopic analysis, and by using aldehydes and ketones as the carbonyl source for the activation of sodium borohydride. This process has been used to produce borane complexes with 1°-, 2°-, and 3°-amines, including those with borane reactive functionalities, heteroarylamines, and a series of phosphines.

Ammonia-borane as a Catalyst for the Direct Amidation of Carboxylic Acids.

Ammonia-borane serves as an efficient substoichiometric (10%) precatalyst for the direct amidation of both aromatic and aliphatic carboxylic acids. In situ generation of amine-boranes precedes the amidation and, unlike the amidation with stoichiometric amine-boranes, this process is facile with 1 equiv of the acid. This methodology has high functional group tolerance and chromatography-free purification but is not amenable for esterification. The latter feature has been exploited to prepare hydroxyl- and thiol-containing amides.

Amine-boranes as Dual-Purpose Reagents for Direct Amidation of Carboxylic Acids.

Amine-boranes serve as dual-purpose reagents for direct amidation, activating aliphatic and aromatic carboxylic acids and, subsequently, delivering amines to provide the corresponding amides in up to 99% yields. Delivery of gaseous or low-boiling amines as their borane complexes provides a major advantage over existing methodologies. Utilizing amine-boranes containing borane incompatible functionalities allows for the preparation of functionalized amides. An intermolecular mechanism proceeding through a triacyloxyborane-amine complex is proposed.