RESUMO
In this work, direct electron transfer (DET)-type extended gate field effect transistor (EGFET) enzymatic sensors were developed by employing DET-type or quasi-DET-type enzymes to detect glucose or lactate in both 100 mM potassium phosphate buffer and artificial sweat. The system employed either a DET-type glucose dehydrogenase or a quasi-DET-type lactate oxidase, the latter of which was a mutant enzyme with suppressed oxidase activity and modified with amine-reactive phenazine ethosulfate. These enzymes were immobilized on the extended gate electrodes. Changes in the measured transistor drain current (ID) resulting from changes to the working electrode junction potential (φ) were observed as glucose and lactate concentrations were varied. Calibration curves were generated for both absolute measured ID and ΔID (normalized to a blank solution containing no substrate) to account for variations in enzyme immobilization and conjugation to the mediator and variations in reference electrode potential. This work resulted in a limit of detection of 53.9 µM (based on ID) for glucose and 2.12 mM (based on ID) for lactate, respectively. The DET-type and Quasi-DET-type EGFET enzymatic sensor was then modeled using the case of the lactate sensor as an equivalent circuit to validate the principle of sensor operation being driven through OCP changes caused by the substrate-enzyme interaction. The model showed slight deviation from collected empirical data with 7.3% error for the slope and 8.6% error for the y-intercept.
Assuntos
Técnicas Biossensoriais , Elétrons , Técnicas Biossensoriais/métodos , Glucose/metabolismo , Glucose 1-Desidrogenase/metabolismo , Ácido Láctico , Enzimas Imobilizadas/metabolismo , EletrodosRESUMO
Glycated albumin (GA) is an important glycemic control marker for diabetes mellitus. This study aimed to develop a highly sensitive disposable enzyme sensor strip for GA measurement by using an interdigitated electrode (IDE) as an electrode platform. The superior characteristics of IDE were demonstrated using one microelectrode of the IDE pair as the working electrode (WE) and the other as the counter electrode, and by measuring ferrocyanide/ferricyanide redox couple. The oxidation current was immediately reached at the steady state when the oxidation potential was applied to the WE. Then, an IDE enzyme sensor strip for GA measurement was prepared. The measurement of fructosyl lysine, the protease digestion product of GA, exhibited a high, steady current immediately after potential application, revealing the highly reproducible measurement. The sensitivity (2.8 nA µM-1) and the limit of detection (1.2 µM) obtained with IDE enzyme sensor strip were superior compared with our previously reported sensor using screen printed electrode. Two GA samples, 15 or 30% GA, corresponding to healthy and diabetic levels, respectively, were measured after protease digestion with high resolution. This study demonstrated that the application of an IDE will realize the development of highly sensitive disposable-type amperometric enzyme sensors with high reproducibility.
Assuntos
Técnicas Biossensoriais/instrumentação , Equipamentos Descartáveis , Enzimas/metabolismo , Albumina Sérica/análise , Eletrodos , Produtos Finais de Glicação Avançada , Reprodutibilidade dos Testes , Albumina Sérica GlicadaRESUMO
Glycated albumin (GA), defined as the percentage of serum albumin glycation, is a mid-term glycemic control marker for diabetes. The concentrations of both glycated human serum albumin (GHSA) and total human serum albumin (HSA) are required to calculate GA. Here, we report the development of a GA sensor employing two albumin aptamers: anti-GHSA aptamer which is specific to GHSA and anti-HSA aptamer which recognizes both glycated and non-glycated HSA. We combine these aptamers with extended gate field effect transistors (EGFETs) to realize GA monitoring without the need to pretreat serum samples, and therefore suitable for point of care and home-testing applications. Using anti-GHSA aptamer-immobilized electrodes and EGFETs, we measured GHSA concentrations between 0.1-10 µM within 20 min. The sensor was able to measure GHSA concentration in the presence of BSA for a range of known GA levels (5-29%). With anti-HSA aptamer-immobilized electrodes and EGFETs, we measured total HSA concentrations from 1-17 µM. Furthermore, GHSA and total HSA concentrations of both healthy and diabetic-level samples were determined with GHSA and HSA sensors. The measured GHSA and total HSA concentrations in three samples were used to determine respective GA percentages, and our calculations agreed with GA levels determined by reference methods. Thus, we developed simple and rapid dual aptamer-based EGFET sensors to monitor GA through measuring GHSA and total HSA concentration, without the need for sample pretreatment, a mandatory step in the current standard of enzymatic GA monitoring.
Assuntos
Técnicas Biossensoriais , Diabetes Mellitus , Humanos , Albumina Sérica Glicada , Produtos Finais de Glicação Avançada , Albumina Sérica , Albumina Sérica Humana , OligonucleotídeosRESUMO
Contemporary electrochemical impedance spectroscopy (EIS)-based biosensors face limitations in their applicability for in vivo measurements, primarily due to the necessity of using a redox probe capable of undergoing oxidation and reduction reactions in solution. Although previous investigations have demonstrated the effectiveness of EIS-based biosensors in detecting various target analytes using potassium ferricyanide as a redox probe, its unsuitability for blood or serum measurements, attributed to its inherent toxicity, poses a significant challenge. In response to this challenge, our study adopted a unique approach, focusing on the use of ingestible materials, by exploring naturally occurring substances within the body, with a specific emphasis on pyrroloquinoline quinone (PQQ). Following an assessment of PQQ's electrochemical attributes, we conducted a comprehensive series of EIS measurements. This involved the thorough characterization of the sensor's evolution, starting from the bare electrode and progressing to the immobilization of antibodies. The sensor's performance was then evaluated through the quantification of insulin concentrations ranging from 1 pM to 100 nM. A single frequency was identified for insulin measurements, offering a pathway for potential in vivo applications by combining PQQ as a redox probe with EIS measurements. This innovative approach holds promise for advancing the field of in vivo biosensing based on the EIS method.
Assuntos
Técnicas Biossensoriais , Cofator PQQ , Técnicas Biossensoriais/métodos , Insulina , Espectroscopia Dielétrica , Imunoensaio , Oxirredução , EletrodosRESUMO
We introduce a versatile method to convert NAD+ or NADP+ -dependent dehydrogenases into quasi-direct electron transfer (quasi-DET)-type dehydrogenases, by modifying with a mediator on the enzyme surface toward the development of 2.5th generation enzymatic sensors. In this study, we use ß-hydroxybutyrate (BHB) dehydrogenase (BHBDh) from Alcaligenes faecalis (AfBHBDh) as a representative NAD+ or NADP+ -dependent dehydrogenase. BHBDhs are important in ketone monitoring, especially for the diagnosis of diabetic ketoacidosis. We modified AfBHBDh with a thiol-reactive phenazine ethosulfate (trPES). We designed, constructed, and modified mutant BHBDhs harboring cysteine residues within 20 Å from the C4 nicotinamide in NAD+/NADH. Mutants Ser65Cys, Thr96Cys, and Lys106Cys showed indistinguishable catalytic activities from the wild-type enzyme, even after trPES modification. These trPES-modified mutants were immobilized on gold disk electrodes via amine coupling with succinimide-groups of dithiobis (succinimidyl hexanoate) self-assembled monolayers for electrochemical measurements. Considering there is a wide range of BHB concentrations, we exploited the linear regression in log scales. The linear range for the sensors with trPES-modified BHBDh mutants Ser65Cys, Thr96Cys, and Lys106Cys were 0.1-4.0 mM in both buffer solution and artificial interstitial fluid (ISF). They have limits of detection of 0.047 mM for Ser65Cys, 0.15 mM for Thr96Cys, and 0.060 mM for Lys106Cys in buffer solution, and 0.12 mM, 0.089 mM, and 0.044 mM in artificial ISF, respectively. These results indicate that redox mediator modification of NAD(P)-dependent dehydrogenases converts them into quasi-DET-type dehydrogenases, thereby enabling their utilization in 2.5th generation enzymatic sensors, which will facilitate the construction of enzymatic sensors suitable for continuous monitoring systems.
Assuntos
Técnicas Biossensoriais , Glucose , NAD , Elétrons , NADP , Técnicas Biossensoriais/métodos , OxirredutasesRESUMO
Haemoglobin A1c (hemoglobin A1c, HbA1c) is an important long-term glycemic control marker for diabetes. The aim of this study was to develop an enzyme flow injection analysis (FIA) system using engineered fructosyl peptide oxidase (FPOx) based on 2.5th generation principle for an HbA1c automated analytical system. FPOx from Phaeosphaeria nodorum (PnFPOx) was engineered by introducing a Lys residue at the R414 position, to be modified with amine reactive phenazine ethosulfate (arPES) in proximity of FAD. The engineered PnFPOx mutant with minimized oxidase activity, N56A/R414K, showed quasi-direct electron transfer (quasi-DET) ability after PES-modification. The FIA system was constructed by employing a PES-modified PnFPOx N56A/R414K and operated at 0 V against Ag/AgCl. The system showed reproducible responses with a linear range of 20-500 µM for both fructosyl valine (FV) and fructosyl valylhistidine (FVH), with sensitivities of 0.49 nA µM-1 and 0.13 nA µM-1, and the detection limits of 1.3 µM and 2.0 µM for FV and FVH, respectively. These results indicate that the enzyme electrochemical FIA system covers the clinical range of HbA1c detection for more 200 consecutive measurements. Protease digested three different levels of HbA1c samples including healthy and diabetic range subjects were also measured with the FIA system. Thus, it will be possible to develop an integrated system consisting of sample pretreatment and sample electrochemical measurement based on an FIA system possessing quasi-DET type PnFPOx.
Assuntos
Técnicas Biossensoriais , Análise de Injeção de Fluxo , Ascomicetos , Elétrons , Hemoglobinas Glicadas/análise , Humanos , PeptídeosRESUMO
Haemoglobin A1c (HbA1c) is a significant glycaemic marker for diabetes mellitus. The level of HbA1c reflects the mean blood glucose level over the prior 2-3 months and it is useful for the assessment of therapeutic effectiveness and for diagnosis. In this study, we report the label-free affinity sensor for HbA1c based on the chemiresistor-type field-effect transistor, which has a simple sensor configuration. Single-walled carbon nanotubes (SWNTs) were used as the transducing element. The fructosyl amino acid binding protein from Rhizobium radiobacter (SocA), which binds to α-fructosyl amino acid specifically, was used as the biorecognition element for fructosyl valine (FV), the product of the proteolytic hydrolysis of HbA1c. The developed sensor shows the ability to measure as low as 1.2 nM FV, which is 14-fold more sensitive compared to the previously reported fluorescence-based sensor using SocA. This sensor also exhibits high specificity where no significant response is observed from either fructosyl lysine (FK) or glucose, which are potential interferents. FK is the ε-fructosyl amino acid from glycated albumin, another glycated protein, whereas glucose is naturally present at very high concentration in the blood. We propose that the modulation of the surface charges on the SWNTs caused by the conformational change in SocA upon ligand binding leads to the proportionate changes in the number of carriers in the SWNT channel.
Assuntos
Agrobacterium tumefaciens/química , Proteínas de Bactérias/química , Técnicas Biossensoriais/métodos , Hemoglobinas Glicadas/análise , Nanotubos de Carbono/química , Valina/análogos & derivados , Técnicas Biossensoriais/instrumentação , Desenho de Equipamento , Humanos , Proteólise , Transistores Eletrônicos , Valina/análiseRESUMO
Enzyme based electrochemical biosensors are divided into three generations according to their type of electron transfer from the cofactors of the enzymes to the electrodes. Although the 3rd generation sensors using direct electron transfer (DET) type enzymes are ideal, the number of enzyme types which possess DET ability is limited. In this study, we report of a glucose sensor using mediator-modified glucose dehydrogenase (GDH), that was fabricated by a new quick-and-easy method using the pre-functionalized amine reactive phenazine ethosulfate (arPES). Thus mediator-modified GDH obtained the ability to transfer electrons to bulky electron acceptors as well as electrodes. The concentration of glucose was successfully measured using electrodes with immobilized PES-modified GDH, without addition of external electron mediators. Therefore, continuous monitoring systems can be developed based on this "2.5th generation" electron transfer principle utilizing quasi-DET. Furthermore, we successfully modified two other diagnostically relevant enzymes, glucoside 3-dehydrogenase and lactate oxidase, with PES. Therefore, various kinds of diagnostic enzymes can achieve quasi-DET ability simply by modification with arPES, suggesting that continuous monitoring systems based on the 2.5th generation principle can be developed for various target molecules.
Assuntos
Técnicas Biossensoriais/métodos , Botrytis/enzimologia , Enzimas Imobilizadas/química , Glucose 1-Desidrogenase/química , Glucose/análise , Aerococcus/enzimologia , Agrobacterium tumefaciens/enzimologia , Glicemia/análise , Transporte de Elétrons , Glucose Desidrogenase/química , Humanos , Oxigenases de Função Mista/química , Fenazinas/química , Proteínas Recombinantes/químicaRESUMO
Glycated proteins, such as glycated hemoglobin (HbA1c) or glycated albumin (GA) in the blood, are essential indicators of glycemic control for diabetes mellitus. Since GA, compared to HbA1c, is more sensitive to short term changes in glycemic levels, GA is expected to be used as an alternative or together with HbA1c as a surrogate marker indicator for glycemic control. In this paper we report the development of a sensing system for measuring GA by combining an enzyme analysis method, which is already used in clinical practice, with electrochemical principles. We used fructosyl amino acid oxidase, hexaammineruthenium(III) chloride as the electron mediator, and an inexpensive and economically attractive screen-printed carbon electrode. We used chronoamperometry to measure protease-digested GA samples. The developed sensor strips were able to measure protease-digested samples containing GA in very small sample volumes (1.3µL) within about 1min. We also prepared enzyme sensor strips suitable for clinical use in which the enzyme and the mediator were deposited and dried on. This sensor system showed a clear correlation between the GA concentration and the resulting current. The strips were stable following 3 months of storage at 37°C. We conclude that this disposable enzyme sensor strip system for measuring GA is suitable for point-of-care test (POCT) applications.
Assuntos
Técnicas Biossensoriais/instrumentação , Sistemas Automatizados de Assistência Junto ao Leito , Fitas Reagentes/análise , Albumina Sérica/análise , Aminoácido Oxirredutases/química , Carbono/química , Eletrodos , Desenho de Equipamento , Produtos Finais de Glicação Avançada , Humanos , Limite de Detecção , Albumina Sérica GlicadaRESUMO
Currently available enzymatic methods for the measurement of glycated proteins utilize fructosyl amino acid/peptide oxidases (FAOXs/FPOXs) as sensing elements. FAOXs/FPOXs oxidize glycated amino acids or glycated dipeptides but they are not able to accept longer glycated peptides or intact glycated proteins as substrates. Therefore, pretreatment via proteolytic digestion is unavoidable with the current enzymatic methods, and there remains a need for simpler measurement methods for glycated proteins. In this study, in order to develop a novel sensing system for glycated albumin (GA), a marker for diabetes, with no requirement for proteolytic digestion, we created an electrochemical sensor based on fructosamine 6-kinase (FN6K) from Escherichia coli. Uniquely, FN6K can react directly with intact GA unlike FAOXs/FPOXs. The concentration of GA in samples was measured using a carbon-printed disposable electrode upon which FN6K as well as two additional enzymes, pyruvate kinase and pyruvate dehydrogenase were overlaid. A clear correlation between the response current and the concentration of GA was observed in the range of 20-100 µM GA, which is suitable for measurement of GA in diluted blood samples from both healthy individuals and patients with diabetes. The sensing system reported here could be applied to point-of-care-testing devices for measurement of glycated proteins.