Centennial Records of Microplastics in Lake Cores in Huguangyan Maar Lake, China.

Microplastic records from lake cores can reconstruct the plastic pollution history. However, the associations between anthropogenic activities and microplastic accumulation are not well understood. Huguangyan Maar Lake (HML) is a deep-enclosed lake without inlets and outlets, where the sedimentary environment is ideal for preserving a stable and historical microplastic record. Microplastic (size: 10-500 µm) characteristics in the HML core were identified using the Laser Direct Infrared Imaging system. The earliest detectable microplastics appeared unit in 1955 (1.1 items g-1). The microplastic abundance ranged from n.d. to 615.2 items g-1 in 1955-2019 with an average of 134.9 items g-1. The abundance declined slightly during the 1970s and then increased rapidly after China's Reform and Opening Up in 1978. Sixteen polymer types were detectable, with polyethylene and polypropylene dominating, accounting for 23.5 and 23.3% of the total abundance, and the size at 10-100 µm accounted for 80%. Socioeconomic factors dominated the microplastic accumulation based on the random forest modeling, and the contributions of GDP per capita, plastic-related industry yield, and total crop yield were, respectively, 13.9, 35.1, and 9.3% between 1955-2019. The total crop yield contribution further increased by 1.7% after 1978. Coarse sediment particles increased with soil erosion exacerbated microplastics discharging into the sediment.

Evidence of economic development revealed in centennial scale sedimentary records of organic pollutants in Huguangyan Marr Lake.

Sedimentary records of polycyclic aromatic hydrocarbons (PAHs) and phthalates could reflect energy consumption and industrial production adjustment. However, there is limited knowledge about their effects on variations of PAH and phthalate compositions in the sediment core. The PAH and phthalate sedimentary records in Huguangyan Maar Lake in Guangdong, China were constructed, and random forest models were adopted to quantify the associated impact factors. Sums of sixteen PAH (∑16 PAH) and seven phthalate (∑7 PAE) concentrations in the sediment ranged from 28.8 to 1110 and 246-4290 µg/kg dry weight in 1900-2020. Proportions of 5-6 ring PAHs to the ∑16 PAHs increased from 32.0 %-40.7 % in 1900-2020 with increased coal and petroleum consumption, especially after 1980. However, those of 2-3 ring PAHs decreased from 30.7 % to 23.6 % due to the biomass substitution with natural gas. The proportions of bis (2-ethylhexyl) phthalate to the ∑7 PAEs decreased from 52.3 %-29.1 % in 1900-2020, while those of di-isobutyl phthalate increased (13.7 % to 42.3 %). The shift from traditional plasticizers to non-phthalates drove this transformation, though the primary plastic production is increasing. Our findings underscore the effectiveness of optimizing energy structures and updating chemical products in reducing organic pollution in aquatic environments.

Accurate and precise determination of boron isotopic ratios at low concentration by positive thermal ionization mass spectrometry using static multicollection of Cs2BO2+ ions.

A static double-collector system for accurate, precise, and rapid boron isotope analysis has been established by employing a newly fixed Faraday H3 and H4 cup enabling simultaneously collected Cs2BO2(+) ion beams (m/z = 308 and 309) on a Finnigan-MAT Triton thermal ionization mass spectrometer of boron (Triton B). The experimental result indicated that Cs2BO2(+) ion beams (m/z = 308 and 309) were simultaneously collected using a fixed Faraday H3 and H4 cup without using the "Zoom Quad" function and reduced accelerating voltage. Furthermore, the method enabled the measurement of samples containing as little as 20 ng of boron. An analysis of the National Institute of Standards and Technology standard reference material (NIST SRM) 951 standard showed external reproducibility (2RSD) of ±0.013‰, ± 0.013‰, and ±0.019‰ for 100, 50, and 20 ng of boron, respectively. The present method of static multicollection of Cs2BO2(+) ions is applicable to a wide field of boron isotopic research that requires high precision and accuracy to analyze samples with low boron concentrations, including pore fluids, foraminifera, rivers, rainwater, and other natural samples.

Strontium concentrations and isotope ratios in enamel of healthy and carious teeth in southern Shaanxi, China.

RATIONALE: As the trace element strontium (Sr) plays a significant role in dental health, it is important to determine the Sr concentration and isotope composition ((87)Sr/(86)Sr) of teeth and whether these values are related to caries formation, age and sex. METHODS: A total of 160 permanent teeth were collected from 7- to 79-year-old people from the southern Shaanxi area of China, including 100 healthy teeth and 60 carious teeth (men and women each accounted for half of the samples). The concentration and isotope composition of Sr elements in the dental enamel of the teeth were measured using inductively coupled plasma mass spectrometry (ICP-MS) and thermal ionization mass spectrometry (TIMS). RESULTS: A significantly lower Sr concentration was found in the enamel of the carious teeth than in that of the healthy teeth for individuals of varying ages and sex. The Sr concentration in human carious teeth ranged between 79.70 µg/g and 85.80 µg/g; while the Sr concentration in healthy teeth ranged between 128 µg/g and 156.77 µg/g. Our results also demonstrated that the (87)Sr/(86)Sr ratio did not appear to be affected by the caries formation, age or sex. The (87)Sr/(86)Sr ratio in the enamel of the healthy and carious teeth of individuals of varying ages and genders ranged between 0.710935 and 0.711037, which falls into the range of (87)Sr/(86)Sr ratios found in the local, naturally occurring water, soils and rocks. CONCLUSIONS: Sr plays a significant role in dental health, and there is a negative correlation between Sr and the occurrence of dental caries. The (87)Sr/(86)Sr ratio of teeth reflects the (87)Sr/(86)Sr ratio of the associated environment, and there is no significant relationship with the frequency of dental caries, age or sex.

High precision measurements of lithium isotopic composition at sub-nanogram by MC-ICP-MS with membrane desolvation.

The geochemistry of Li and Li isotopes is a promising tracer of chemical weathering processes for both modern and ancient times. Therefore, accurate and precise determination of the isotopic composition of Li is required for a large variety of complex geological samples with different Li concentrations and matrix/Li ratios. Especially, geochemical studies of precious geological samples with ultra-low lithium content and high matrix. In this study, the accuracy and the precision corresponding to Li isotopic measurements of low-level samples using multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) with membrane desolvation introduction system was evaluated. The method of MC-ICP-MS with membrane desolvation and a high-sensitivity X-skimmer cone, together with a simple one-step column separation enabled the high-precision isotopic analysis of Li quantities as small as 2 ng. The long-term instrumental external reproducibility of δ7Li values for the L-SVEC and SPEX-Li were 0.0 ± 0.1‰ (n = 20) and 12.1 ± 0.4‰ (n = 20), respectively. Based on the measurements on a series of international reference materials over the last two years. The measured δ7Li values for the standards with a variety of matrices, including BHVO-2, AGV-2 and seawater (NASS-6). The δ7Li values of BHVO-2 (4.58 ± 0.35‰), AGV-2 (6.85 ± 0.40‰) and NASS-6 (30.88 ± 0.20‰) are in agreement with the published data within the uncertainty. We also present analytical results for South China Sea surface seawater water, meteorite, limestones and rain water. These results demonstrate the validity of the method for obtaining highly precise and accurate outcomes.

Spatial distribution and potential sources of arsenic and water-soluble ions in the snow at Ili River Valley, China.

Trace elements and water-soluble ions in snow can be used as indicators to reveal natural and anthropogenic emissions. To understand the chemical composition, characteristics of snow and their potential sources in the Ili River Valley (IRV), snow samples were collected from 17 sites in the IRV from December 2018 to March 2019. Inverse distance weighting, enrichment factor (EF) analysis, and backward trajectory modelling were applied to evaluate the spatial distributions and sources of water-soluble ions and dissolved arsenic (As) in snow. The results indicate that Ca2+ and SO42- were the dominant ions, and the concentrations of As ranged from 0.09 to 0.503 µg L-1. High concentrations of As were distributed in the northwest and middle of the IRV, and the concentrations of the major ions were high in the west of the IRV. The strong correlation of As with F-, SO42-, and NO2- demonstrates that As mainly originated from coal-burning and agricultural activities. Principal component analysis showed that the ions originated from a combination of anthropogenic and crustal sources. The EFs showed that K+, SO42-, and Mg2+ were mainly influenced by human activities. Backward trajectory cluster analysis suggested that the chemical composition of snow was affected by soil dust transport from the western air mass, the unique terrain, and local anthropogenic activities. These results provide important scientific insights for atmospheric environmental management and agricultural production within the IRV.

Effective elimination of organic matter interference in boron isotopic analysis by thermal ionization mass spectrometry of coral/foraminifera: micro-sublimation technology combined with ion exchange.

In order to better estimate the effectiveness of micro-sublimation technology on the elimination of organic matter interference during boron isotopic analysis, a series of improved experiments was carried out using simple apparatus. Recovery rates after micro-sublimation were measured for boric acid solutions with different B contents or different B/organic matter ratios. The improved micro-sublimation procedure combined with ion-exchange technology was then used to test natural samples (coral and foraminifera) for the separation of boron. Our results show that the time taken for 100% recovery of different amounts of B differed and that the proportions of B/organic matter within the natural organic matter have little effect on the relationship between the recovery rates of B and the micro-sublimation times. The experiments further confirm that the organic matter does indeed have an effect on boron isotope analyses by positive thermal ionization mass spectrometry and that the use of micro-sublimation can effectively remove interferences from the organic matter during boron isotopic analysis.