RESUMO
The dorsal hippocampus is involved in behavioral avoidance regulation. It is unclear how experiences such as the neonatal stress of maternal deprivation (MD) and post-weaning environmental enrichment (EE) affect avoidance behavior and the dorsal hippocampal parameters, including neuronal morphology, corticotrophin-releasing hormone (CRH) signaling, and oxytocin receptor (OTR) level. In male BALB/c mice, we found that MD impaired avoidance behavior in the step-on test compared to non-MD and EE rearing conditions could alleviate that partially. MD increased neuronal branches in the CA1 but decreased synaptic connection levels in the CA2, CA3, and DG. Meanwhile, MD increased the CA1's OTR levels, which negatively correlated with nucleus densities. MD also increased the CA1's and CA2's CRH levels, which positively correlated with CRHR1 levels. However, MD statistically elevated the CA3's CRH receptor 1 (CRHR1) levels, which negatively correlated with nucleus densities and, probably, synaptic connection levels in the CA3. The additive effects of MD and EE maintained similar CRH levels and CRHR1 levels as well as OTR levels in the hippocampal areas as the additive of non-MD and non-EE. However, the presence of MD and EE still decreased the CA1's neuronal branches and the CA2's and DG's synaptic connection levels. The study illustrates how MD and EE affect avoidance behaviors, hippocampal neuron morphology, and CRH and OTR levels. The results indicate that the late-life environmental improvement partially restores the alterations in dorsal hippocampal areas induced by early life stress.
Assuntos
Hipocampo , Receptores de Ocitocina , Camundongos , Animais , Masculino , Hipocampo/metabolismo , Neurônios/metabolismo , Hormônio Liberador da Corticotropina/metabolismoRESUMO
Ten novel meroterpenoids, dryoptins/11â³-epi-dryoptins A~E (1: ~10: ) with an unprecedented skeleton consisting of dimeric or trimeric acylphloroglucinols and dehydrotheonelline, two undescribed acylphloroglucinol-nerolidol meroterpenoids (11: ~12: ), and ten known acylphloroglucinol derivatives (13: ~22: ), were isolated from D. crassirhizoma. The novel structures including absolute configurations were established by comprehensive spectroscopic analyses and quantum chemical electronic circular dichroism (ECD) calculations. A biosynthetic pathway of 1: ~10: was assumed. The trimeric acylphloroglucinol meroterpenoids 7: /8: showed significant antifungal activity against standard Candida albicans with a MIC50 value of 1.61 µg/mL [fluconazole (FLC): 3.41 µg/mL], and when combined with FLC, the principal components 20: and 21: exhibited strong antifungal activities against FLC-resistant C. albicans with MIC50 values of 8.39 and 7.16 µg/mL (FLC: > 100 µg/mL), respectively. Moreover, compounds 2, 5: /6, 18, 19: , and 21: exhibited inhibitory effects against several pathogenic fungi and bacteria, with MIC50 values of 6.25 ~ 50 µg/mL.
Assuntos
Antifúngicos , Dryopteris , Antifúngicos/farmacologia , Dryopteris/química , Fluconazol/farmacologia , Candida albicans , Dicroísmo CircularRESUMO
A simple and economic strategy to construct a chitosan-ink carbon nanoparticle sponge sensor was proposed by freeze-drying of chitosan and Chinese ink mixture solution. The microstructure and physical properties of the composite sponges with different ratios are characterized. The interfacial compatibility of chitosan and carbon nanoparticles in ink is satisfied, and the mechanical property and porosity of chitosan was increased by the incorporation of carbon nanoparticles. Due to excellent conductivity and good photothermal conversion effect of the carbon nanoparticles in ink, the constructed flexible sponge sensor has satisfactory strain and temperature sensing performance and high sensitivity (133.05 ms). In addition, these sensors can be successfully applied to monitor the large joint movement of the human body and the movement of muscle groups near the esophagus. Dual functionally integrated sponge sensors show great potential for strain and temperature detection in real time. The prepared chitosan-ink carbon nanoparticle composite shows promising applications in wearable smart sensors.
RESUMO
A DFT study was performed on the mechanisms of B(C6F5)3-catalyzed transfer hydrogenation of aldehydes/ketones, using PhSiH3 and stoichiometric water. Path B2 includes a stepwise Piers SN2-Si process, H- transfer, and hydrolysis desilylation of siloxane, in which the hydrolysis desilylation step is rate-determining. Path C1 is first determined, involving a B(C6F5)3-catalyzed concerted addition step of 2H2O to carbonyl generating R1R2C(OH)2, a subsequent SN2-Si dehydroxylation step of R1R2C(OH)2 giving R1R2C=OH+ and (C6F5)3B-H-, and final H- transfer producing the respective alcohol R1R2CHOH. A B(C6F5)3-catalyzed H2 generation process (Path H0) is determined. Path B2 is the only mechanism for the stepwise method. Using a one-time one-pot feeding method, alkyl/aryl aldehydes, dialkyl ketones, and alkyl aryl ketones (1a-g) can be reduced into alcohols chemoselectively and effectively at room temperature. More than 1 equiv of water over substrates is necessary. Herein, Path C1 is the dominant transfer hydrogenation pathway, and the H2 generation is efficiently inhibited, by the competitive advantage of Path C1 and initial dominant existence of the complexes IM0 and IM1-x. The diaryl ketones (1h,1i) cannot be efficiently reduced into the respective alcohols using the one-time feeding one-pot method. The barriers of C-TS1-h/i are obviously higher than those of C-TS1-a-g, attributed to the electron-donating and space effects of the two aryls on carbonyl C. The possible Paths B2 and C1 of transfer hydrogenation have no competitive advantage with Path H0. The DFT results are consistent with the experiments.
RESUMO
Conductive hydrogels show extensive applications in flexible electronics and biomedical areas, but it is a challenge to simultaneously achieve high mechanical properties, satisfied electrical conductivity, good biocompatibility, self-recovery and anti-freezing properties through a simple preparation method. Herein, chitin nanocrystals (ChNCs) were employed to encapsulate liquid metal nanoparticles (LMNPs) to ensure the dispersion stability of LMNPs in a hydrogel system composed of polyacrylamide (PAM) and polyvinyl alcohol (PVA). The synergistic effect of ChNCs-stabilized LMNPs imparts remarkable conductivity to the hydrogel, making it an effective strain sensor for human motion. With 1 % LMNPs, the composite hydrogel stretches up to 2100 %, showing excellent stretchability. Under 10 cycles of 200 % strain, hysteresis loop curves overlap, indicating outstanding fatigue resistance. The hydrogel exhibits remarkable self-recovery, enduring 1400 % deformation without rupture. In addition, its effective antifreeze properties result from immersion in a glycerol-water solvent. Even at -20 °C and 60 °C, the hydrogel maintains stable, reproducible resistance changes at 150 % tensile strain. Therefore, the high-performance conductive hydrogel containing ChNCs stabilized LM has promising applications in flexible wearable sensing devices.
RESUMO
Halloysite nanotubes (HNTs) are one-dimensional clay nanomaterials featuring distinct tubular structures and unique surface charges. HNTs can readily form ordered assembly structures under specific conditions, which shows significant potential applications in optical and biological fields. In this study, sodium hexametaphosphate (SHMP) was employed as a stabilizer to prepare polymer spherulite-like patterns via the evaporation-induced self-assembly (EISA) technique. The incorporation of SHMP enhanced the repulsion force among the nanotubes and the surface potential, which facilitated the orderly deposition of HNTs. The influence of HNT concentration, SHMP concentration, drying temperature, and substrate on the polymer spherulites-like pattern has been investigated in detail. The optimal conditions were 10 wt % HNT dispersion, 0.6 wt % SHMP concentration, 30 °C as drying temperature, and glass substrates. In addition, by changing the droplet volume and shape of the three-phase contact line, patterns of different sizes and shapes can be achieved. Bovine serum albumin or metal salt compounds were incorporated into the dispersion of SHMP-modified HNTs, which altered the charge and the self-assembled patterns with different area ratios. Thus, this technology can be utilized for the analysis and comparison of protein and metal ion concentration accurately. This study creates the correlation between the structural parameters and the preparation process involved in creating polymer spherulite-like patterns of modified HNTs and offers fresh insights into potential applications for the self-assembly of HNT droplets in the realms of anticounterfeiting and solution concentration analysis.
RESUMO
The leakage during the phase change process and low thermal conductivity of PCMs limit their application area. In this study, Pickering emulsion stabilized with chitin nanocrystals (ChNCs) was used to prepare paraffin wax (PW) microcapsules by forming a dense melamine-formaldehyde resin shell on the surface of droplets. The PW microcapsules were then loaded into the metal foam to endow high thermal conductivity to the composite. The PW emulsions could be formed at low concentrations of ChNCs (0.3 wt%), and the PW microcapsules exhibits a favorable thermal cycling stability and a satisfactory latent heat-storage capacity over 170 J/g. Most importantly, the encapsulation of the polymer shell not only endows the microcapsules with high encapsulation efficiency of 98.8 %, non-leakage properties under prolonged high temperature conditions, but also with high flame retardancy. In addition, the composite of PW microcapsules/copper foam shows satisfactory performance in terms of thermal conductivity, thermal storage capacity and thermal reliability, which can be used for effective temperature regulation of heat generating materials. This study provides new design strategy of natural and sustainable nanomaterials stabilized PCMs, which shows promising application in the field of energy management and thermal equipment temperature regulation.
Assuntos
Quitina , Nanopartículas , Emulsões , Cápsulas , Temperatura Alta , Reprodutibilidade dos Testes , Parafina , PolímerosRESUMO
Uncontrollable bleeding from military conflicts, accidents, and surgical procedures is a major life-threatening factor. Rapid, safe, and convenient hemostasis is critical to the survival of bleeding patients in prehospital care. However, the peel-off of hemostats such as kaolinite sheets from the cotton fibers often poses a risk of distal thrombosis. Here, an efficient clay hemostat of halloysite nanotubes is tightly bound onto commercial cotton fibers, which is capillary mediated by biopolymer alginate with Ca2+ crosslinking. The robust clay nanotube dressing materials maintain high procoagulant activity after harsh water treatment, and only a few residuals of halloysite exist in the wound area. Compared with commercial hemostat QuikClot Combat gauze, halloysite-alginate-cotton composite dressing exhibits hemostatic properties both in vivo and in vitro with high safety. The hemostatic mechanism of the dressing is attributed to activating platelets, locally concentrating clotting components in the nanoclay, halloysite coagulation factors, and alginate cross-linked with Ca2+ . This work inspires robust self-assembly of clay nanotubes on textile fibers and offers a hemostatic material with balanced high hemostatic activity, minimal ingredient loss, and biocompatibility. The robust dressing based on halloysite tightly bounded cotton shows great potential for military, medical, and civil bleeding control with low health risks.
Assuntos
Hemostáticos , Nanotubos , Humanos , Hemostáticos/farmacologia , Argila , Fibra de Algodão , Hemostasia , Hemorragia/terapia , Biopolímeros , Bandagens , Alginatos/farmacologiaRESUMO
Uncontrolled massive hemorrhage is a crucial cause of death, and developing efficient hemostatic materials are of great medical importance. Herein, we prepared a halloysite-chitosan-collagen composite sponge by directional freeze-drying method and coated the sponge with hydrophobic polydimethylsiloxane coating for rapid and effective hemostasis. The aligned channel structure of the sponge with a pore size of ~30 µm was beneficial for the transport of blood. Morphology and spectrum results suggested that chitosan and collagen are capable of adsorbing on the outer surface of HNTs due to the hydrogen bonding and electrostatic attractions. The directional freeze-dried sponge absorbed the majority of the blood within 10 s, and that process essentially was completed in 30 s, which are faster than its non-directional counterpart. The composite sponges exhibited high antibacterial properties towards E. coli and S. aureus, and they are non-cytotoxic towards mouse fibroblasts and have high hemocompatibility. The hemostatic dressing avoided unnecessary blood loss because of excessive blood absorption. In vivo experiments of rats also confirmed the ability of the asymmetric sponges to rapidly clot and reduce reducing blood loss. This work developed a high-performance and hemostatic dressing by material design and processing technique, which shows a promising application in wound healing.
Assuntos
Quitosana , Hemostáticos , Camundongos , Ratos , Animais , Quitosana/química , Argila , Escherichia coli , Staphylococcus aureus , Colágeno/química , Hemostáticos/química , Hemostasia , Hemorragia , Bandagens/microbiologia , Antibacterianos/farmacologiaRESUMO
Preparing complex non-spherical assemblies of elongated nanoparticles and exploring their topological conformations is a challenge due to liquid crystals' mobility and elastic distortion. Here, we fabricated a variety of non-spherical liquid crystal assemblies of chitin nanocrystals (ChNCs) in a coagulation bath containing sodium triphosphate (STP) by drop impact assembly method, and the forming mechanism and internal topology were systematically investigated. The collection height, ChNCs concentration, and STP concentration have significant influence on the shape and size of the assembled structures. Long-range ordered structures and long-lived topological textures of the ChNCs liquid crystal can be obtained since a molecular interaction of hydrogen bonding and electrostatic attractions between ChNCs and STP occur during the impact assembly. Rheological and kinetic analysis suggested the shear thinning behavior of the ChNCs liquid crystals and the rapid gelation phenomenon of ChNCs induced by STP. Morphology results showed that the rod-like ChNCs in the non-spherical assemblies were orderly and closely arranged with periodic repetition and layered structure. The non-spherical assemblies of ChNCs liquid crystals can be used as carriers of carbon nanotubes, magnetic Fe3O4 nanoparticles, synthesized polymers, and anticancer drugs for functional composite applications. The drop impact assembly method of ChNCs liquid crystal structure is highly controllable on the composition, morphology, and function, which shows promising applications in energy, environmental-friendly, and bioactive materials.
RESUMO
Four undescribed tryptamine-derived alkaloids, hunteriasines A - D, were isolated and identified from Hunteria umbellata (Apocynaceae), together with fifteen known indole alkaloids. The chemical structure and absolute configuration of hunteriasine A were determined by spectroscopic and X-ray crystallographic data analyses. Hunteriasine A, featuring with a unique scaffold comprised of tryptamine and an unprecedented "12-carbon unit" moiety, is a zwitterionic indole-derived and pyridinium-containing alkaloid. Hunteriasines B - D were identified by spectroscopic data analyses and theoretical calculations. A plausible biogenetic pathway for hunteriasines A and B was proposed. The lipopolysaccharide-stimulated mouse macrophage cell line J774A.1 cell-based bioactivity assays revealed that (+)-eburnamine, strictosidinic acid, and (S)-decarbomethoxydihydrogambirtannine enhance the release of interleukin-1ß.
Assuntos
Alcaloides , Apocynaceae , Alcaloides de Triptamina e Secologanina , Camundongos , Animais , Alcaloides/farmacologia , Alcaloides Indólicos/farmacologia , Alcaloides Indólicos/química , Apocynaceae/química , Extratos Vegetais/química , Triptaminas/farmacologia , Estrutura Molecular , Alcaloides de Triptamina e Secologanina/químicaRESUMO
Nine previously undescribed compounds including six tocopherol derivatives (1-6) and three acylphloroglucinol derivatives (7-9) were isolated and characterized from the plants of Dryopteris crassirhizoma. Their structures with absolute configurations were determined by extensive spectroscopic analyses, including IR, HRESIMS, NMR, and calculated electronic circular dichroism (ECD). Compounds 1 and 2 are the first tocopheroid derivatives possessing unique 2,5-dimethylcyclopent-4-ene-1,3-dione carbon skeleton, and compounds 3-6 were new 5a-norcyclopentenones having a spirofused bicyclic carbon skeleton. The biosynthetic pathway of compounds 1-6 was postulated. When combined with fluconazole (FLC), compound 3 showed significant antifungal activity against standard Candida albicans with MIC50 value of 1.19 µg/mL (FLC: 3.41 µg/mL). Furthermore, the anti-plant pathogenic fungi and bacterial activities have been evaluated in vitro, compounds 5 and 8 showed anti-Verticillium dahlia and Sclerotinia sclerotiorum with MIC value of 50 µg/mL, respectively. Compounds 1 and 5 exhibited moderate antibacterial activities against Micrococcus luteus with MIC value of 50 µg/mL, respectively.
Assuntos
Dryopteris , Dryopteris/química , Tocoferóis , Estrutura Molecular , Antifúngicos/farmacologia , Antifúngicos/química , Espectroscopia de Ressonância Magnética , Testes de Sensibilidade Microbiana , AntibacterianosRESUMO
High conductive and transparent hydrogels with adhesion function are ideal candidates for soft electronic devices. However, it remains a challenge to design appropriate conductive nanofillers to endow hydrogels with all these characteristics. The 2D MXene sheets are promising conductive nanofillers for hydrogels due to excellent electricity and water-dispersibility. However, MXene is quite susceptible to oxidation. In this study, polydopamine (PDA) was employed to protect the MXene from oxidation and meanwhile endow hydrogels with adhesion. However, PDA coated MXene (PDA@MXene) were easily flocculated from dispersion. 1D cellulose nanocrystals (CNCs) were employed as steric stabilizers to prevent the agglomeration of MXene during the self-polymerization of dopamine. The obtained PDA coated CNC-MXene (PCM) sheets display outstanding water-dispersible and anti-oxidation stability and are promising conductive nanofillers for hydrogels. During the fabrication of polyacrylamide hydrogels, the PCM sheets were partially degraded into PCM nanoflakes with smaller size, leading to transparent PCM-PAM hydrogels. The PCM-PAM hydrogels can self-adhere to skin, and possess high transmittance of 75 % at 660 nm, superior electric conductivity of 4.7 S/m with MXene content as low as 0.1 % and excellent sensitivity. This study will facilitate the development of MXene based stable, water-dispersible conductive nanofillers and multi-functional hydrogels.
RESUMO
A high-performance biodegradable plastic was made from a chitin KOH/urea solution. The solution was transferred into a hydrogel by cross-linking using epichlorohydrin and ethanol immersion, and a chitin bioplastic was finally prepared by drying in a mold at 40 °C. The solution concentration positively impacts viscosity, crystallinity, and smoothness. A 4% chitin bioplastic exhibits high barrier properties, flame retardancy, high-temperature resistance, mechanical properties (tensile strength up to 107.1 MPa), and soil degradation properties. The chitin bioplastic can be completely degraded by microorganisms in 7 weeks. In addition, biosafety tests suggest that chitin is safe for cells and crops (wheat and mung beans). The chitin bioplastic was further applied to containers, straws, cups, and photoprotection, and it was found that the water resistance and transparency were comparable to those of commercial polypropylene plastics. Due to the excellent performance, safety, and sustainability of the chitin bioplastic, it is expected to become a good substitute for conventional fossil fuel-based plastics.
Assuntos
Plásticos Biodegradáveis , Quitina , Polipropilenos , Epicloroidrina , Plásticos , Água , Solo , Hidrogéis , Combustíveis Fósseis , Ureia , EtanolRESUMO
The screen-printing process of conductive ink can realize simple and large-scale manufacture of micro/nano patterns for producing wearable electronic products. Herein, chitin nanocrystals (ChNCs) are used as a dispersant for the preparation of multiwalled carbon nanotube (MWCNT) ink with high viscosity and uniformity by ultrasound treatment. ChNCs can interact with MWCNT in noncovalent ways, including π-π and hydrophobic interactions. ChNCs/MWCNT (CCNT) ink does not aggregate even after standing for 3 months with a maximum MWCNT concentration of 33 mg mL-1 and dispersion efficiency of 91.1%. Using CCNT ink, a paper-based thermoelectric generator (TEG) is manufactured by screen-printing technology. With good thermoelectric and strain sensing properties, CCNT coated paper can stably collect human energy at room temperature to realize self-powering. The CCNT coated paper-based TEG can convert thermal voltage signals into musical notes, monitor the changes in human behavior and respiratory rate, and monitor joint movements. Moreover, CCNT coated paper has no cytotoxicity by CCK-8 and live/dead staining. This work puts forward a strategy of green preparation of MWCNT-based ink by adding renewable chitin, which opens up a new way to apply MWCNT-based ink in self-powering wearable multifunctional sensors.
Assuntos
Nanopartículas , Nanotubos de Carbono , Dispositivos Eletrônicos Vestíveis , Humanos , Nanotubos de Carbono/química , Quitina , TintaRESUMO
The medial-lateral habenula (LHbM)'s role in anxiety and depression behaviors in female mice remains unclear. Here, we used neonatal maternal deprivation (MD) and post-weaning environmental enrichment (EE) to treat female BALB/c offspring and checked anxiety-like and depression-like behaviors as well as the corticotropin-releasing hormone (CRH), oxytocin receptor (OTR), estrogen receptor-beta (ERß) levels in their LHbM at adulthood. We found that MD enhanced state anxiety-like behaviors in the elevated plus-maze test, and EE caused trait anxiety-like behaviors in the open field test and depression-like behaviors in the tail suspension test. The immunochemistry showed that MD reduced OT immunoreactive neuron numbers in the hypothalamic paraventricular nucleus but increased OTR levels in the LHbM; EE increased CRH levels in the LHbM but decreased OTR levels in the LHbM. The additive effects of EE and MD maintained the behavioral parameters, OT-ir neuronal numbers, CRH levels, and OTR levels similar to the additive of non-MD and non-EE. The correlation analysis showed that CRH levels correlated with synaptic connection levels, OTR levels correlated with nucleus densities, and ERß levels correlated with Nissl body levels and body weights in female mice. Neither MD nor EE affected ERß levels in the LHbM. Together, the study revealed the relationships between behaviors and neuroendocrine and neuronal alterations in female LHbM and the effects of experiences including MD and EE on them.
Assuntos
Habenula , Ocitocina , Animais , Feminino , Camundongos , Ocitocina/farmacologia , Hormônio Liberador da Corticotropina , Privação Materna , Receptor beta de Estrogênio/genética , Habenula/metabolismo , Depressão , Receptores de Ocitocina/genética , AnsiedadeRESUMO
A new annulated N-heterocyclic carbene (NHC), pyrido[1,2-a]-2-ethyl[1,2,4]triazol-3-ylidene, has been synthesized and its good catalytic activity for benzoin condensation has been experimentally determined by You and co-workers recently [ Ma , Y. J. , Wei , S. P. , Lan , J. B. , Wang , J. Z. , Xie , R. G. , and You , J. S. J. Org. Chem. 2008 , 73 , 8256 ]. In this work, the mechanism of the title reaction has been intensively studied computationally by employing the density functional theory (B3LYP) method in conjunction with 6-31+G(d) and 6-311+G(2d,p) basis sets. Our results indicate that path A (in which a sequence of intermolecular proton transfers between two carbene/benzaldehyde coupling intermediates affords enamine) and path B (in which a t-BuOH assisted hydrogen transfer generates enamine) proposed on the basis of the Breslow mechanism are competitive for their similar barriers. In path A, the first intermolecular proton transfer between two N-heterocyclic carbene/benzaldehyde coupled intermediates to form tertiary alcohol and enolate anion is theoretically the rate-determining step with corresponding barrier (30.93 kcal/mol), while the t-BuOH assisted hydrogen transfer generating Breslow enamine is the rate-determining step with corresponding barrier (28.84 kcal/mol) in path B. The coupling of carbene and benzaldehyde, and the coupling of enamine and another benzaldehyde to form a C-C bond are partially rate-determining for their relatively significant barriers (24.06 and 26.95 kcal/mol, respectively), being the same in both paths A and B. Our results are in nice agreement with the experimental result in a kinetic investigation of thiazolium ion-catalyzed benzoin condensation performed by White and Leeper in 2001.
Assuntos
Benzoína/química , Piridinas/química , Triazóis/química , Benzaldeídos/química , Catálise , Furanos/química , Hidrogênio/química , Metano/análogos & derivados , Metano/química , Modelos Químicos , Estrutura Molecular , Prótons , Teoria Quântica , terc-Butil Álcool/químicaRESUMO
A DFT and experimental study on the mechanism of B(C6F5)3 catalyzed imine reduction is performed using PhSiH3 as reductant under stoichiometric water conditions. Ingleson's path B is reconfirmed here. And four novel (C6F5)3B-OH2 induced pathways (paths C2, C3, D2 and D3) entirely different from all the previous mechanisms were determined for the first time. They are all B(C6F5)3 and water/amine catalyzed cycles, in which the nucleophilic water or amine catalyzed addition step between PhSiH3 and the N-silicon amine cation is the rate-determining step of paths C2/D2 and C3/D3 with activation Gibbs free energy barriers of 23.9 and 18.3 kcal mol-1 in chloroform, respectively, while the final desilylation of the N-silicon amine cation depends on an important intermediate, (C6F5)3B-OH-. The competitive behavior of the 5 paths can explain the experimental facts perfectly; if all the reactants and catalysts are added into the system simultaneously, water amount and nucleophiles (excess water and produced/added amine) provide on-off selectivity of the pathways and products. 1 eq. water leads to quick formation of (C6F5)3B-OH-, leading to B-II being turned off, and nucleophiles like excess water and produced/added amine switch on CD-II, leading to production of the amine. B-I' of Ingleson's path B is the only mechanism for anhydrous systems, giving N-silicon amine production only; B-I and C-I are competitive paths for systems with no more than 1 eq. water, producing the N-silicon amine and the [PhHC[double bond, length as m-dash]NHPh]+[(C6F5)3B-OH]- ion pair; and paths C2, C3, D2 and D3 are competitive for systems with 1 eq. water and nucleophiles like excess water or added/produced amine, directly giving amination products.
RESUMO
Poly(lactic acid) (PLA)-based composite films reinforced with acetylated cellulose nanocrystals (ACNC) (1 wt%) and ZnO nanoparticles at different content (1, 3, 5 and 7 wt%) were prepared by solution-casting method. The surface acetylation of cellulose nanocrystals improved its dispersion in the PLA matrix. The morphologies, optical, mechanical, barrier, thermal and antibacterial properties of PLA/ACNC/ZnO ternary composite films were investigated. SEM images showed that ACNC and ZnO were evenly distributed in the PLA matrix to form homogenous film when the content of ZnO was ≤5 wt%. The PLA/ACNC/ZnO composite films showed improved UV blocking, mechanical strength, oxygen and water vapor barrier. This ternary composite also exhibited excellent antibacterial activity against E. coli and S. aureus. The migration amounts of Zn2+ from PLA/ACNC/ZnO composite film to food simulants were below the specific migration limit (5 mg/kg). Overall, the desirable properties of the resulting PLA/ACNC/ZnO ternary composite film highlighted the potential application as a promising option for active food packaging materials.
Assuntos
Antibacterianos/química , Celulose/química , Embalagem de Alimentos , Nanopartículas Metálicas , Poliésteres/química , Óxido de Zinco/química , Acetilação , Antibacterianos/farmacologia , Celulose/farmacologia , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Microbiologia de Alimentos , Poliésteres/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Óxido de Zinco/farmacologiaRESUMO
A new natural formulation composed of CMC and various contents of CNC immobilized AgNPs (CNC@AgNPs) was developed for paper coating. The mechanical strength, water vapor and air barrier properties, and antibacterial activities of CMC/CNC@AgNPs coated paper improved with the increasing content of CNC@AgNPs. CMC/CNC@AgNPs7 % coated paper exhibited 1.26 times increase in tensile strength, 45.4 % decrease in WVP, 93.3 % reduction in air permeability as well as the best antibacterial activities against E.coli and S.aureus compared with uncoated paper. Moreover, the cumulative release rate of AgNPs from coated paper significantly reduced due to the immobilization effect of CNC on AgNPs. Furthermore, CMC/CNC@AgNPs coated paper was used to package strawberries under ambient conditions. The results showed that coated paper could maintain better strawberries quality compared with unpackaged strawberries and extend the shelf-life of strawberries to 7 days. Therefore, the prepared CMC/CNC@AgNPs coated paper will have a great application prospect in the food packaging.