Stabilizing Zinc Anode through Ion Selection Sieving for Aqueous Zn-Ion Batteries.

Uncontrollable dendrite growth and corrosion induced by reactive water molecules and sulfate ions (SO42-) seriously hindered the practical application of aqueous zinc ion batteries (AZIBs). Here we construct artificial solid electrolyte interfaces (SEIs) realized by sodium and calcium bentonite with a layered structure anchored to anodes (NB@Zn and CB@Zn). This artificial SEI layer functioning as a protective coating to isolate activated water molecules, provides high-speed transport channels for Zn2+, and serves as an ionic sieve to repel negatively charged anions while attracting positively charged cations. The theoretical results show that the bentonite electrodes exhibit a higher binding energy for Zn2+. This demonstrates that the bentonite protective layer enhances the Zn-ion deposition kinetics. Consequently, the NB@Zn//MnO2 and CB@Zn//MnO2 full-battery capacities are 96.7 and 70.4 mAh g-1 at 2.0 A g-1 after 1000 cycles, respectively. This study aims to stabilize Zn anodes and improve the electrochemical performance of AZIBs by ion-selection sieving.

Carbon Structure Regulation Strategy for the Electrode of Vanadium Redox Flow Battery.

Vanadium redox flow battery (VRFB) is a type of energy storage device known for its large-scale capacity, long-term durability, and high-level safety. It serves as an effective solution to address the instability and intermittency of renewable energy sources. Carbon-based materials are widely used as VRFB electrodes due to cost-effectiveness and well-stability. However, pristine electrodes need proper modification to overcome original poor hydrophilicity and fewer reaction active sites. Adjusting the carbon structure is recognized as a viable method to boost the electrochemical activity of electrodes. This review delves into the advancements in research related to ordered and disordered carbon structure electrodes including the adjusting methods, structural characteristics, and catalytic properties. Ordered carbon structures are categorized into nanoscale and macroscale orderliness based on size, leading to improved conductivity and overall performance of the electrode. Disordered carbon structures encompass methods such as doping atoms, grafting functional groups, and creating engineered holes to enhance active sites and hydrophilicity. Based on the current research findings on carbon electrode structures, this work puts forth some promising prospects for future feasibility.

Stabilizing Zn Metal Anode Through Regulation of Zn Ion Transfer and Interfacial Behavior with a Fast Ion Conductor Protective Layer.

Aqueous Zn-ion batteries (AZIBs) attract intensive attention owing to their environmental friendliness, cost-effectiveness, innate safety, and high specific capacity. However, the practical applications of AZIBs are hindered by several adverse phenomena, including corrosion, Zn dendrites, and hydrogen evolution. Herein, a Zn anode decorated with a 3D porous-structured Na3 V2 (PO4)3 (NVP@Zn) is obtained, where the NVP reconstruct the electrolyte/anode interface. The resulting NVP@Zn anode can provide a large quantity of fast and stable channels, facilitating enhanced Zn ion deposition kinetics and regulating the Zn ions transport process through the ion confinement effect. The NASICON-type NVP protective layer promote the desolvation process due to its nanopore structure, thus effectively avoiding side reactions. Theoretical calculations indicate that the NVP@Zn electrode has a higher Zn ion binding energy and a higher migration barrier, which demonstrates that NVP protective layer can enhance Zn ion deposition kinetics and prevent the unfettered 2D diffusion of Zn ions. Therefore, the results show that NVP@Zn/MnO2 full cell can maintain a high specific discharge capacity of 168 mAh g-1 and a high-capacity retention rate of 74.6% after cycling. The extraordinary results obtained with this strategy have confirmed the promising applications of NVP in high-performance AZIBs.

Zinc-Bismuth Binary Alloy Enabling High-Performance Aqueous Zinc Ion Batteries.

Reconfiguration of zinc anodes efficiently mitigates dendrite formation and undesirable side reactions, thus favoring the long-term cycling performance of aqueous zinc ion batteries (AZIBs). This study synthesizes a Zn@Bi alloy anode (Zn@Bi) using the fusion method, and find that the anode surfaces synthesized using this method have an extremely high percentage of Zn(002) crystalline surfaces. Experimental results indicate that the addition of bismuth inhibits the hydrogen evolution reaction and corrosion of zinc anodes. The finite-element simulation results indicate that Zn@Bi can effectively achieve a uniform anodic electric field, thereby regulating the homogeneous depositions of zinc ions and reducing the production of Zn dendrite. Theoretical calculations reveal that the incorporation of Bi favors the anode structure stabilization and higher adsorption energy of Zn@Bi corresponds to better Zn deposition kinetics. The Zn@Bi//Zn@Bi symmetric cell demonstrates an extended cycle life of 1000 h. Furthermore, when pairing Zn@Bi with an α-MnO2 cathode to construct a Zn@Bi//MnO2 cell, a specific capacity of 119.3 mAh g-1 is maintained even after 1700 cycles at 1.2 A g-1 . This study sheds light on the development of dendrite-free anodes for advanced AZIBs.

Biochar/layered double hydroxides composites as catalysts for treatment of organic wastewater by advanced oxidation processes: A review.

Heterogeneous advanced oxidation process has been widely studied as an effective method for removing organic pollutants in wastewater, but the development of efficient catalysts is still challenging. This review summaries the present status of researches on biochar/layered double hydroxides composites (BLDHCs) as catalysts for treatment of organic wastewater. The synthesis methods of layered double hydroxides, the characterizations of BLDHCs, the impacts of process factors influencing catalytic performance, and research advances in various advanced oxidation processes are discussed in this work. The integration of layered double hydroxides and biochar provides synthetic effects for improving pollutant removal. The enhanced pollutant degradation in heterogeneous Fenton, sulfate radical-based, sono-assisted, and photo-assisted processes using BLDHCs have been verified. Pollutant degradation in heterogeneous advanced oxidation processes using BLDHCs is influenced by process factors such as catalyst dosage, oxidant addition, solution pH, reaction time, temperature, and co-existing substances. BLDHCs are promising catalysts due to the unique features including easy preparation, distinct structure, adjustable metal ions, and high stability. Currently, catalytic degradation of organic pollutants using BLDHCs is still in its infancy. More researches should be conducted on the controllable synthesis of BLDHCs, the in-depth understanding of catalytic mechanism, the improvement of catalytic performance, and large-scale application of treating real wastewater.

Synergistic Catalysis of SnO2/Reduced Graphene Oxide for VO2+/VO2+ and V2+/V3+ Redox Reactions.

In spite of their low cost, high activity, and diversity, metal oxide catalysts have not been widely applied in vanadium redox reactions due to their poor conductivity and low surface area. Herein, SnO2/reduced graphene oxide (SnO2/rGO) composite was prepared by a sol-gel method followed by high-temperature carbonization. SnO2/rGO shows better electrochemical catalysis for both redox reactions of VO2+/VO2+ and V2+/V3+ couples as compared to SnO2 and graphene oxide. This is attributed to the fact that reduced graphene oxide is employed as carbon support featuring excellent conductivity and a large surface area, which offers fast electron transfer and a large reaction place towards vanadium redox reaction. Moreover, SnO2 has excellent electrochemical activity and wettability, which also boost the electrochemical kinetics of redox reaction. In brief, the electrochemical properties for vanadium redox reactions are boosted in terms of diffusion, charge transfer, and electron transport processes systematically. Next, SnO2/rGO can increase the energy storage performance of cells, including higher discharge electrolyte utilization and lower electrochemical polarization. At 150 mA cm-2, the energy efficiency of a modified cell is 69.8%, which is increased by 5.7% compared with a pristine one. This work provides a promising method to develop composite catalysts of carbon materials and metal oxide for vanadium redox reactions.

Separator designs for aqueous zinc-ion batteries.

Aqueous zinc-ion batteries (AZIBs) are attracting worldwide attention due to their multiple merits such as extreme safety, low cost, feasible assembly, and environmentally friendly enabled by water-based electrolytes. At present, AZIBs have experienced systematic advances in battery components including cathode, anode, and electrolyte, whereas research involving separators is insufficient. The separator is the crucial component of AZIBs through providing ion transport, forming contact with electrodes, serving as a container for electrolyte, and ensuring the efficient battery operation. Considering this great yet ignored significance, it is timely to present the latest advances in design strategies, the systematic classification and summary of separators. We summarize the separator optimization strategies mainly along two approaches including the modification of the frequently used glass fiber and the exploitation of new separators. The advantages and disadvantages of the two strategies are analyzed from the material types and the characteristics of different strategies. The effects and mechanisms of various materials on regulating the uniform migration and deposition of Zn2+, balancing the excessively concentrated nucleation points, inhibiting the growth of dendrites, and the occurrence of side reactions were discussed using confinement, electric field regulation, ion interaction force, desolvation, etc. Finally, potential directions for further improvement and development of AZIBs separators are proposed, aiming at providing helpful guidance for this booming field.

Vanadium Redox Flow Battery: Review and Perspective of 3D Electrodes.

Vanadium redox flow battery (VRFB) has garnered significant attention due to its potential for facilitating the cost-effective utilization of renewable energy and large-scale power storage. However, the limited electrochemical activity of the electrode in vanadium redox reactions poses a challenge in achieving a high-performance VRFB. Consequently, there is a pressing need to assess advancements in electrodes to inspire innovative approaches for enhancing electrode structure and composition. This work categorizes three-dimensional (3D) electrodes derived from materials such as foam, biomass, and electrospun fibers. By employing a flexible electrode design and compositional functionalization, high-speed mass transfer channels and abundant active sites for vanadium redox reactions can be created. Furthermore, the incorporation of 3D electrocatalysts into the electrodes is discussed, including metal-based, carbon-based, and composite materials. The strong interaction and ordered arrangement of these nanocomposites have an influence on the uniformity and stability of the surface charge distribution, thereby enhancing the electrochemical performance of the composite electrodes. Finally, the challenges and perspectives of VRFB are explored through advancements in 3D electrodes, 3D electrocatalysts, and mechanisms. It is hoped that this review will inspire the development of methodology and concept of 3D electrodes in VRFB, so as to promote the future development of scientific energy storage and conversion technology.

Synthesis of copper/carbon nanofibers by electrostatic spinning toward persulfate activation for treatment of antibiotic wastewater.

Antibiotics in water will cause serious harm to human health and ecosystem. Carbon-based materials and transition metals activated peroxodisulfate (PDS) to produce active species, which can degrade residual antibiotics in water. In this paper, Cu/CNF (carbon nanofibers) composites were first prepared by introducing Cu into CNF using electrostatic spinning technology, which was used to activate PDS to degrade tetracycline (TC). The degradation efficiency of Cu/CNF/PDS was 36.23% higher than that of CNF/PDS. The reason is that introducing Cu can increase the number of surface functional groups and specific surface area of CNF, and then improve the catalytic performance. The functional groups and Cu species are the active sites for catalytic PDS. Moreover, the main ways to degrade TC in the Cu/CNF/PDS system are singlet oxygen (1O2) and electron transfer. Based on the above analysis, we modified CNF with transition metal salts, prepared efficient environmental functional materials, and used them for PDS activation, providing a theoretical basis and technical support for the degradation of antibiotic pollutants and creating new ideas for other research.

Covalent Organic Framework with 3D Ordered Channel and Multi-Functional Groups Endows Zn Anode with Superior Stability.

Achieving a highly robust zinc (Zn) metal anode is extremely important for improving the performance of aqueous Zn-ion batteries (AZIBs) for advancing "carbon neutrality" society, which is hampered by the uncontrollable growth of Zn dendrite and severe side reactions including hydrogen evolution reaction, corrosion, and passivation, etc. Herein, an interlayer containing fluorinated zincophilic covalent organic framework with sulfonic acid groups (COF-S-F) is developed on Zn metal (Zn@COF-S-F) as the artificial solid electrolyte interface (SEI). Sulfonic acid group (- SO3H) in COF-S-F can effectively ameliorate the desolvation process of hydrated Zn ions, and the three-dimensional channel with fluoride group (-F) can provide interconnected channels for the favorable transport of Zn ions with ion-confinement effects, endowing Zn@COF-S-F with dendrite-free morphology and suppressed side reactions. Consequently, Zn@COF-S-F symmetric cell can stably cycle for 1,000 h with low average hysteresis voltage (50.5 mV) at the current density of 1.5 mA cm-2. Zn@COF-S-F|MnO2 cell delivers the discharge specific capacity of 206.8 mAh g-1 at the current density of 1.2 A g-1 after 800 cycles with high-capacity retention (87.9%). Enlightening, building artificial SEI on metallic Zn surface with targeted design has been proved as the effective strategy to foster the practical application of high-performance AZIBs.

Engineering Covalent Organic Frameworks Toward Advanced Zinc-Based Batteries.

Zinc-based batteries (ZBBs) have demonstrated considerable potential among secondary batteries, attributing to their advantages including good safety, environmental friendliness, and high energy density. However, ZBBs still suffer from issues such as the formation of zinc dendrites, occurrence of side reactions, retardation of reaction kinetics, and shuttle effects, posing a great challenge for practical applications. As promising porous materials, covalent organic frameworks (COFs) and their derivatives have rigid skeletons, ordered structures, and permanent porosity, which endow them with great potential for application in ZBBs. This review, therefore, provides a systematic overview detailing on COFs structure pertaining to electrochemical performance of ZBBs, following an in depth discussion of the challenges faced by ZBBs, which includes dendrites and side reactions at the anode, as well as dissolution, structural change, slow kinetics, and shuttle effect at the cathode. Then, the structural advantages of COF-correlated materials and their roles in various ZBBs are highlighted. Finally, the challenges of COF-correlated materials in ZBBs are outlined and an outlook on the future development of COF-correlated materials for ZBBs is provided. The review would serve as a valuable reference for further research into the utilization of COF-correlated materials in ZBBs.

Polyaniline functionalized separator as synergistic medium for aqueous zinc-ion batteries.

Aqueous zinc-ion batteries (AZIBs) have received increasing attention as a promising energy storage device. However, it was rarely reported that the separators as a synergistic medium stabilize the cathode and anode materials. Herein, a polyaniline functionalized glass fiber separator (PANI-GF) was synthesized in situ. The porous structure of PANI effectively regulated the flux of zinc ions inside the separator and its deposition behavior through ion confinement. The abundant N-containing functional groups can adsorb water molecules and effectively reduce harmful side reactions. Moreover, the PANI-GF separator adjusted pH to inhibit dissolution of the cathode by protonation. Importantly, based on the synergistic separator, the Zn-MnO2 full cell exhibited more than twice discharge capacity compared to the conventional cell after 1000 cycles at 2 A g-1. This study provided in-depth insight into the design of convenient, reliable, cost-effective, and synergistic separators for AZIBs.

Biomass-derived carbon materials for vanadium redox flow battery: From structure to property.

Biomass-derived carbon (BDC) materials are suitable as electrode or catalyst materials for vanadium redox flow battery (VRFB), owing to the characteristics of vast material sources, environmental friendliness, and multifarious structures. A timely and comprehensive review of the structure and property significantly facilitates the development of BDC materials. Here, the paper starts with the preparation of biomass materials, including carbonization and activation. It is designed to summarize the lastest developments in BDC materials of VRFB in four different structural dimensions from zero dimension (0D) to three dimension (3D). Every dimension begins with meticulously selected examples to introduce the structural characteristics of materials and then illustrates the improved performance of the VRFB due to the structure. Simultaneously, challenges, solutions, and prospects are indicated for the further development of BDC materials. Overall, this review will help researchers select excellent strategies for the fabrication of BDC materials, thereby facilitating the use of BDC materials in VRFB design.

Facile synthesis of magnetic ZnFe2O4/AC composite to activate peroxydisulfate for dye degradation under visible light irradiation.

Heterogeneous photocatalysis/persulfate oxidation process has been considered as a promising technology for dye contaminants removal. The magnetic ZnFe2O4/active carbon (AC) composites were hydrothermally synthesized and firstly used to activate peroxydisulfate (PDS) for rhodamine B (RhB) degradation under visible LED light irradiation. The optimized Vis-ZnFe2O4/AC(4/1)-PDS system can enhance the RhB degradation efficiency by 32.01% and 13.87% compared with Vis-ZnFe2O4-PDS and Vis-AC-PDS systems, respectively. The influence of operational parameters such as catalyst dosage (0.2 - 0.4 g L-1), PDS concentration (1.0 - 2.0 g L-1), temperature (25 - 45 °C), solution pH (2.7 - 10.9), and coexisting inorganic ions (Cl-, NO3-, HCO3-, PO43-, Cu2+, Fe3+, and Ca2+) on RhB degradation was studied, and 100% of RhB (20 mg L-1) was degraded after 80 min at operational condition: 0.30 g L-1 of ZnFe2O4/AC(4/1) and 1.5 g L-1 of PDS, solution pH of 2.74, reaction temperature of 25 °C. The quenching experiments, EPR test, and XPS analysis were employed to reveal the proposed mechanism, which demonstrated that 1O2 played a more important role than other reactive species (SO4•-, •OH, O2•-, and h+) in RhB degradation. The generation of 1O2 via the two routes was as follows: (i) the in situ formed active oxygen (O*) reacted with HSO5- to produce 1O2; (ii) O2•- was oxidized by h+ to form 1O2. After five consecutive cycles, the photodegradation efficiency of RhB by ZnFe2O4/AC(4/1) catalyst slightly decreased from 88.52 to 83.92%, indicating the excellent reusability of ZnFe2O4/AC(4/1) photocatalyst. As designed, Vis-ZnFe2O4/AC-PDS oxidation system can effectively remove RhB from the different real water matrices, and the degradation efficiency of RhB in tap water, river water, and secondary effluent was 78.24%, 79.55%, and 74.53% after 80 min of reaction, respectively.

Dual metal ions and water molecular pre-intercalated δ-MnO2 spherical microflowers for aqueous zinc ion batteries.

Layered δ-MnO2 is a promising cathode material for aqueous zinc ion batteries (AZIBs) due to its high theoretical capacity, high operating voltage and low cost. However, the dissolution of MnO2 and the disproportionation of Mn3+ will lead to irreversible reaction and serious structural degradation of the material during cycling process. In this work, the Al3+ pre-intercalated K0.27MnO2·0.54H2O was prepared by a one-step hydrothermal method with citric acid as the complexing agent and weak reducing agent. Based on the pillars of bimetallic ions K+, Al3+ and water, the framework and interlayer of δ-MnO2 is stabilized. Besides, a certain amount of Al3+ facilitates the increase of crystal water compared with the pure K0.27MnO2·0.54H2O, which is not only conducive to promote the construction of porous and loose 3D morphology, but also beneficial to improve the stability of layered structure and accelerate the migration rate of zinc ions. Contributed to the dissolution/deposition reaction mechanism combined with H+/Zn2+ co-insertion/co-extraction mechanism, it has achieved the high capacity with the maximum reversible specific capacity of 269.5 mAh g-1 at 0.5 A g-1 and excellent stability with 205.8 mAh g-1 even after 300 cycles in Zn//Al-KMO battery.

A smelting-rolling strategy for ZnIn bulk phase alloy anodes.

Reversibility and stability are considered as the key indicators for Zn metal anodes in aqueous Zn-ion batteries, yet they are severely hindered by uncontrolled Zn stripping/plating and side reactions. Herein, we fabricate a bulk phase ZnIn alloy anode containing trace indium by a typical smelting-rolling process. A uniformly dispersed bulk phase of the whole Zn anode is constructed rather than only a protective layer on the surface. The Zn deposition can be regarded as instantaneous nucleation due to the adsorption of the evenly dispersed indium, and formation of the exclusion zone for further nucleation can be prevented at the same time. Owing to the bulk phase structure of ZnIn alloy, the indium not only plays a crucial role in Zn deposition, but also improves the Zn stripping. Consequently, the as-designed ZnIn alloy anode can sustain stable Zn stripping/plating for over 2500 h at 4.4 mA cm-2 with nearly 6 times smaller voltage hysteresis than that of pure Zn. Moreover, it enables a substantially stable ZnIn//NH4V4O10 battery with 96.44% capacity retention after 1000 cycles at 5 A g-1. This method of regulating the Zn nucleation by preparing a Zn-based alloy provides a potential solution to the critical problem of Zn dendrite growth and by-product generation fundamentally.

Metal-Organic Frameworks Functionalized Separators for Robust Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries (AZIBs) are one of the promising energy storage systems, which consist of electrode materials, electrolyte, and separator. The first two have been significantly received ample development, while the prominent role of the separators in manipulating the stability of the electrode has not attracted sufficient attention. In this work, a separator (UiO-66-GF) modified by Zr-based metal organic framework for robust AZIBs is proposed. UiO-66-GF effectively enhances the transport ability of charge carriers and demonstrates preferential orientation of (002) crystal plane, which is favorable for corrosion resistance and dendrite-free zinc deposition. Consequently, Zn|UiO-66-GF-2.2|Zn cells exhibit highly reversible plating/stripping behavior with long cycle life over 1650 h at 2.0 mA cm-2, and Zn|UiO-66-GF-2.2|MnO2 cells show excellent long-term stability with capacity retention of 85% after 1000 cycles. The reasonable design and application of multifunctional metal organic frameworks modified separators provide useful guidance for constructing durable AZIBs.

A Review on 3D Zinc Anodes for Zinc Ion Batteries.

Zinc ion batteries (ZIBs) have been gradually developed in recent years due to their abundant resources, low cost, and environmental friendliness. Therefore, ZIBs have received a great deal of attention from researchers, which are considered as the next generation of portable energy storage systems. However, poor overall performance of ZIBs restricts their development, which is attributed to zinc dendrites and a series of side reactions. Constructing 3D zinc anodes has proven to be an effective way to significantly improve their electrochemical performance. In this review, the challenges of zinc anodes in ZIBs, including zinc dendrites, hydrogen evolution and corrosion, as well as passivation, are comprehensively summarized and the energy storage mechanisms of the zinc anodes and 3D zinc anodes are discussed. 3D zinc anodes with different structures including fiberous, porous, ridge-like structures, plated zinc anodes on different substrates and other 3D zinc anodes, are subsequently discussed in detail. Finally, emerging opportunities and perspectives on the material design of 3D zinc anodes are highlighted and challenges that need to be solved in future practical applications are discussed, hopefully illuminating the way forward for the development of ZIBs.

Interfacial Engineering Strategy for High-Performance Zn Metal Anodes.

Due to their high safety and low cost, rechargeable aqueous Zn-ion batteries (RAZIBs) have been receiving increased attention and are expected to be the next generation of energy storage systems. However, metal Zn anodes exhibit a limited-service life and inferior reversibility owing to the issues of Zn dendrites and side reactions, which severely hinder the further development of RAZIBs. Researchers have attempted to design high-performance Zn anodes by interfacial engineering, including surface modification and the addition of electrolyte additives, to stabilize Zn anodes. The purpose is to achieve uniform Zn nucleation and flat Zn deposition by regulating the deposition behavior of Zn ions, which effectively improves the cycling stability of the Zn anode. This review comprehensively summarizes the reaction mechanisms of interfacial modification for inhibiting the growth of Zn dendrites and the occurrence of side reactions. In addition, the research progress of interfacial engineering strategies for RAZIBs is summarized and classified. Finally, prospects and suggestions are provided for the design of highly reversible Zn anodes.

Enhanced Catalysis of P-doped SnO2 for the V2+/V3+ Redox Reaction in Vanadium Redox Flow Battery.

In this work, nanosized P-doped SnO2 (SnO2-P) was prepared by a sol-gel method as a catalyst for the V3+/V2+ redox reaction in vanadium redox flow battery. Compared with SnO2, the electrochemical performance of SnO2-P is significantly improved. This is because P doping provides more active sites and shows greatly improved electrical conductivity, thereby increasing the electron transfer rate. As a result, SnO2-P shows better catalytic performance than SnO2. The SnO2-P modified cell is designed, and it exhibits an increase of 47.2 mA h in discharge capacity and 8.7% in energy efficiency compared with the pristine cell at 150 mA cm-2. These increases indicate that the modified cell has a higher electrolyte utilization rate. This study shows that SnO2-P is a new and efficient catalyst for vanadium redox flow battery.