Kondo Effect of Co-Porphyrin: Remarkable Sensitivity to Adsorption Sites and Orientations.

We investigated the Kondo effect of cobalt(II)-5-15-bis(4'-bromophenyl)-10,20-bis(4'-iodophenyl)porphyrin (CoTPPBr2I2) molecules on Au(111) with low-temperature scanning tunneling microscopy under ultrahigh vacuum conditions. The molecules exhibit four adsorption configurations at the top and bridge sites of the surface with different molecular orientations. The Kondo resonance shows extraordinary sensitivity to the adsorption configuration. By switching the molecule between different configurations, the Kondo temperature is varied over a wide range from ≈8 up to ≈250 K. Density functional theory calculations reveal that changes of the adsorption configuration lead to distinct variations of the hybridization between the molecule and the surface. Furthermore, we show that surface reconstruction plays a significant role for the molecular Kondo effect.

Highly Sensitive, Easy-to-Use, One-Step Detection of Peroxide-, Nitrate- and Chlorate-Based Explosives with Electron-Rich Ni Porphyrins.

Homemade explosives, such as peroxides, nitrates, and chlorates, are increasingly abused by terrorists, criminals, and amateur chemists. The starting materials are easily accessible and instructions on how to make the explosives are described on the Internet. Safety considerations raise the need to detect these substances quickly and in low concentrations using simple methods. Conventional methods for the detection of these substances require sophisticated, electrically operated, analytical equipment. The simpler chemical detection methods are multistep and require several chemicals. We have developed a simple, one-step method that works similarly to a pH test strip in terms of handling. The analytical reaction is based on an acid-catalyzed oxidation of an electron-rich porphyrin to an unusually stable radical cation and dication. The detection limit for the peroxide-based explosive triacetone triperoxide (TATP), which is very frequently used by terrorists, is 40 ng and thus low enough to detect the substance without direct contact via the gas phase. It is sufficient to bring the stick close to the substance to observe a color change from red to green. Nitrates and chlorates, such as ammonium nitrate, urea nitrate, or potassium chlorate, are detected by direct contact with a sensitivity of 85-350 ng. A color change from red to dark brown is observed. The test thus detects all homemade explosives and distinguishes between the extremely impact-, shock-, and friction-sensitive peroxides and the less sensitive nitrates and chlorates by color change of a simple test strip.

To Isomerize or not to Isomerize? E/Z Isomers of Cyclic Azobenzene Derivatives and Their Reactivity Upon One-Electron Reduction.

Azo compounds are efficient electron acceptors. Upon one-electron reduction they generally isomerize forming the thermodynamically most stable radical anion. Herein we show that the size of the central ring in 1,2-diazocines and diazonines has a ruling influence on the configuration of the one-electron reduced species. Markedly, diazonines, which bear a central nine membered heterocycle, show light-induced E/Z isomerization, but retain the configuration of the diazene N=N moiety upon one-electron reduction. Accordingly, E/Z isomerization is not induced by reduction.

Exceptionally Mild and High-Yielding Synthesis of Vinyl Esters of Alpha-Ketocarboxylic Acids, Including Vinyl Pyruvate, for Parahydrogen-Enhanced Metabolic Spectroscopy and Imaging.

Metabolic changes often occur long before pathologies manifest and treatment becomes challenging. As key elements of energy metabolism, α-ketocarboxylic acids (α-KCA) are particularly interesting, e.g., as the upregulation of pyruvate to lactate conversion is a hallmark of cancer (Warburg effect). Magnetic resonance imaging with hyperpolarized metabolites has enabled imaging of this effect non-invasively and in vivo, allowing the early detection of cancerous tissue and its treatment. Hyperpolarization by means of dynamic nuclear polarization, however, is complex, slow, and expensive, while available precursors often limit parahydrogen-based alternatives. Here, we report the synthesis for novel 13C, deuterated ketocarboxylic acids, and a much-improved synthesis of 1-13C-vinyl pruvate-d6, arguably the most promising tracer for hyperpolarizing pyruvate using parahydrogen-induced hyperpolarization by side arm hydrogenation. The new synthesis is scalable and provides a high yield of 52%. We elucidated the mechanism of our Pd-catalyzed trans-vinylation reaction. Hydrogenation with parahydrogen allowed us to monitor the addition, which was found to depend on the electron demand of the vinyl ester. Electron-poor α-keto vinyl esters react slower than "normal" alkyl vinyl esters. This synthesis of 13C, deuterated α-ketocarboxylic acids opens up an entirely new class of biomolecules for fast and cost-efficient hyperpolarization with parahydrogen and their use for metabolic imaging.

Light-Controlled Destruction and Assembly: Switching between Two Differently Composed Cage-Type Complexes.

We report on two regioisomeric, diazocine ligands 1 and 2 that can both be photoswitched between the E- and Z-configurations with violet and green light. The self-assembly of the four species (1-Z, 1-E, 2-Z, 2-E) with CoII ions was investigated upon changing the coordination vectors as a function of the ligand configuration (E vs Z) and regioisomer (1 vs 2). With 1-Z, Co2 (1-Z)3 was self-assembled, while a mixture of ill-defined species (oligomers) was observed with 2-Z. Upon photoswitching with 385 nm to the E configurations, the opposite was observed with 1-E forming oligomers and 2-E forming Co2 (2-E)3 . Light-controlled dis/assembly was demonstrated in a ligand competition experiment with sub-stoichiometric amounts of CoII ions; alternating irradiation with violet and green light resulted in the reversible transformation between Co2 (1-Z)3 and Co2 (2-E)3 over multiple cycles without significant fatigue by photoswitching.

Light-Powered Dissipative Assembly of Diazocine Coordination Cages.

Stimuli-responsive coordination cages allow reversible control over guest binding and release, relevant for adaptive receptors, carriers, catalysts, and complex systems. Light serves as an advantageous stimulus, as it can be applied with precise spatial and temporal resolution without producing chemical waste products. We report the first Pd-mediated coordination cage based on ligands embedding a diazocine photoswitch. While the thermodynamically more stable cis-photoisomer sloppily assembles to a mixture of species with general formula [Pdncis-L2n], the less stable trans-isomer yields a defined [Pd2trans-L4] cage that reversibly converts back to the cis-system by irradiation at 530 nm or thermal relaxation. The [Pdncis-L2n] species do not bind a given guest; however, [Pd2trans-L4] is able to encapsulate a bis-sulfonate as long as it is kept assembled, requiring continuous irradiation at 385 nm. In the absence of UV light, thermal relaxation results in back-switching and guest release. Assembly and properties of the system were characterized by a combination of NMR, ion mobility ESI-MS, single-crystal X-ray diffraction, and UV-vis absorption studies.

Photoswitchable Diazocine-Based Estrogen Receptor Agonists: Stabilization of the Active Form inside the Receptor.

Photopharmacology is an emerging approach in drug design and pharmacological therapy. Light is used to switch a pharmacophore between a biologically inactive and an active isomer with high spatiotemporal resolution at the site of illness, thus potentially avoiding side effects in neighboring healthy tissue. The most frequently used strategy to design a photoswitchable drug is to replace a suitable functional group in a known bioactive molecule with azobenzene. Our strategy is different in that the photoswitch moiety is closer to the drug's scaffold. Docking studies reveal a very high structural similarity of natural 17ß-estradiol and the E isomers of dihydroxy diazocines, but not their Z isomers, respectively. Seven dihydroxy diazocines were synthesized and subjected to a biological estrogen reporter gene assay. Four derivatives exhibit distinct estrogenic activity after irradiation with violet light, which can be shut off with green light. Most remarkably, the photogenerated, active E form of one of the active compounds isomerizes back to the inactive Z form with a half-life of merely several milliseconds in water, but nevertheless is active for more than 3 h in the presence of the estrogen receptor. The results suggest a significant local impact of the ligand-receptor complex toward back-isomerization. Thus, drugs that are active when bound but lose their activity immediately after leaving the receptor could be of great pharmacological value because they strongly increase target specificity. Moreover, the drugs are released into the environment in their inactive form. The latter argument is particularly important for drugs that act as endocrine disruptors.

Synthesis of 13 C and 2 H Labeled Vinyl Pyruvate and Hyperpolarization of Pyruvate.

The hyperpolarization of nuclear spins has enabled unique applications in chemistry, biophysics, and particularly metabolic imaging. Parahydrogen-induced polarization (PHIP) offers a fast and cost-efficient way of hyperpolarization. Nevertheless, PHIP lags behind dynamic nuclear polarization (DNP), which is already being evaluated in clinical studies. This shortcoming is mainly due to problems in the synthesis of the corresponding PHIP precursor molecules. The most widely used DNP tracer in clinical studies, particularly for the detection of prostate cancer, is 1-13 C-pyruvate. The ideal derivative for PHIP is the deuterated vinyl ester because the spin physics allows for 100 % polarization. Unfortunately, there is no efficient synthesis for vinyl esters of ß-ketocarboxylic acids in general and pyruvate in particular. Here, we present an efficient new method for the preparation of vinyl esters, including 13 C labeled, fully deuterated vinyl pyruvate using a palladium-catalyzed procedure. Using 50 % enriched parahydrogen and mild reaction conditions, a 13 C polarization of 12 % was readily achieved; 36 % are expected with 100 % pH2 . Higher polarization values can be potentially achieved with optimized reaction conditions.

Effect of an axial ligand on the self-assembly of molecular platforms.

Sub-monolayer amounts of trioxatriangulenium (TOTA) molecules functionalized with biphenyl on Ag(111) were investigated with scanning tunnelling microscopy. The molecule is comprised of a rod-shaped axial ligand and a triangular platform that tends to form hydrogen bonds in arrays. Two superstructures are observed, a hexagonal tiling and a phase of molecular double rows. While the former structure matches previous observations from other functionalized TOTA molecules the latter one was unexpected. Aided by density functional theory results, we analyse the observed intramolecular contrast and present a model of the new phase. We discuss possible interaction mechanisms underlying the molecular pattern.

Parahydrogen-Induced Polarization Relayed via Proton Exchange.

The hyperpolarization of nuclear spins is a game-changing technology that enables hitherto inaccessible applications for magnetic resonance in chemistry and biomedicine. Despite significant advances and discoveries in the past, however, the quest to establish efficient and effective hyperpolarization methods continues. Here, we describe a new method that combines the advantages of direct parahydrogenation, high polarization (P), fast reaction, and low cost with the broad applicability of polarization transfer via proton exchange. We identified the system propargyl alcohol + pH2 → allyl alcohol to yield 1H polarization in excess of P ≈ 13% by using only 50% enriched pH2 at a pressure of ≈1 bar. The polarization was then successfully relayed via proton exchange from allyl alcohol to various target molecules. The polarizations of water and alcohols (as target molecules) approached P ≈ 1% even at high molar concentrations of 100 mM. Lactate, glucose, and pyruvic acid were also polarized, but to a lesser extent. Several potential improvements of the methodology are discussed. Thus, the parahydrogen-induced hyperpolarization relayed via proton exchange (PHIP-X) is a promising approach to polarize numerous molecules which participate in proton exchange and support new applications for magnetic resonance.

Azimuthal Dipolar Rotor Arrays on Surfaces.

A set of dipolar molecular rotor compounds was designed, synthesized and adsorbed as self-assembled 2D arrays on Ag(111) surfaces. The title molecules are constructed from three building blocks: (a) 4,8,12-trioxatriangulene (TOTA) platforms that are known to physisorb on metal surfaces such as Au(111) and Ag(111), (b) phenyl groups attached to the central carbon atom that function as pivot joints to reduce the barrier to rotation, (c) pyridine and pyridazine units as small dipolar units on top. Theoretical calculations and scanning tunneling microscopy (STM) investigations hint at the fact that the dipoles of neighboring rotors interact through space through pairs of energetically favorable head-to-tail arrangements.

Catalytic Hydrogenation of Trivinyl Orthoacetate: Mechanisms Elucidated by Parahydrogen Induced Polarization.

Parahydrogen (pH2 ) induced polarization (PHIP) is a unique method that is used in analytical chemistry to elucidate catalytic hydrogenation pathways and to increase the signal of small metabolites in MRI and NMR. PHIP is based on adding or exchanging at least one pH2 molecule with a target molecule. Thus, the spin order available for hyperpolarization is often limited to that of one pH2 molecule. To break this limit, we investigated the addition of multiple pH2 molecules to one precursor. We studied the feasibility of the simultaneous hydrogenation of three arms of trivinyl orthoacetate (TVOA) intending to obtain hyperpolarized acetate. It was found that semihydrogenated TVOA underwent a fast decomposition accompanied by several minor reactions including an exchange of geminal methylene protons of a vinyl ester with pH2 . The study shows that multiple vinyl ester groups are not suitable for a fast and clean (without any side products) hydrogenation and hyperpolarization that is desired in biochemical applications.

Molecular Spin State Switching and Photochromism in the Red and Near Infrared with Ni(II) Chlorin and Ni(II) Bacteriochlorin.

Molecules or ions are either paramagnetic (unpaired electrons) or diamagnetic (all electrons are paired). Switching between the two states under ambient conditions was considered a typical solid state phenomenon and has been termed spin crossover. The first single-molecule spin state switches operated with light in solution were developed a decade ago and offer a number of technical applications that are not accessible to solid state systems. Magnetic switching in biological environments, however, requires water solubility, and for in vivo applications, switching wavelengths within the bio-optical window (650-950 nm) are needed. We now present molecular spin state switches that are water-soluble and switchable in the far-red and near-infrared region. At the same time, they are photochromic compounds with excellent photophysical properties. trans-cis isomerization is induced with 505 nm radiation, and cis-trans conversion with 620 or 720 nm radiation. The metastable cis isomers are stable at room temperature for at least several weeks. The detailed mechanism of this surprising and unprecedented long wavelength photoisomerization of azobenzenes is still under investigation.

Photoswitching of Diazocines in Aqueous Media.

We present a systematic investigation of the photophysical properties of diazocines in aqueous media. The Z-E photoconversion yields of CH2CH2- and CH2S-bridged diazocines decrease with increasing water content in acetonitrile. However, there is one exception. A CH2-NAc-bridged diazocine mostly retains its photostationary state in water (85 to 72%) because of the high quantum yields for the Z → E conversion. Moreover, it is water-soluble without further substitution and is therefore ideally suited as a photoswitch in biological (aqueous) environments.

Selective excitation of hydrogen doubles the yield and improves the robustness of parahydrogen-induced polarization of low-γ nuclei.

We describe a new method for pulsed spin order transfer of parahydrogen-induced polarization (PHIP) that enables high polarization in incompletely 2H-labeled molecules by exciting only the desired protons in a frequency-selective manner. This way, the effect of selected J-couplings is suspended. Experimentally 1.25% 13C polarization were obtained for 1-13C-ethyl pyruvate and 50% pH2 at 9.4 Tesla.

Towards Photoswitchable Contrast Agents for Absolute 3D Temperature MR Imaging.

Temperature can be used as clinical marker for tissue metabolism and the detection of inflammations or tumors. The use of magnetic resonance imaging (MRI) for monitoring physiological parameters like the temperature noninvasively is steadily increasing. In this study, we present a proof-of-principle study of MRI contrast agents (CA) for absolute and concentration independent temperature imaging. These CAs are based on azoimidazole substituted NiII porphyrins, which can undergo Light-Driven Coordination-Induced Spin State Switching (LD-CISSS) in solution. Monitoring the fast first order kinetic of back isomerisation (cis to trans) with standard clinical MR imaging sequences allows the determination of half-lives, that can be directly translated into absolute temperatures. Different temperature responsive CAs were successfully tested as prototypes in methanol-based gels and created temperature maps of gradient phantoms with high spatial resolution (0.13×0.13×1.1 mm) and low temperature errors (<0.22 °C). The method is sufficiently fast to record the temperature flow from a heat source as a film.

Substituted nitrogen-bridged diazocines.

Novel nitrogen-bridged diazocines (triazocines) were synthesized that carry a formyl or an acetyl group at the CH2NR-bridge and bromo- or iodo-substituents at the distant phenyl ring. The photophysical properties were investigated in acetonitrile and water. As compared to previous approaches the yields of the intramolecular azo cyclizations were increased (from ≈40 to 60%) using an oxidative approach starting from the corresponding aniline precursors. The Z→E photoconversion yields in acetonitrile are 80-85% and the thermal half-lives of the metastable E configurations are 31-74 min. Particularly, the high photoconversion yields (≈70%) of the water-soluble diazocines are noteworthy, which makes them promising candidates for applications in photopharmacology. The halogen substituents allow further functionalization via cross-coupling reactions.

Visible-light-driven photocontrol of the Trp-cage protein fold by a diazocine cross-linker.

Diazocines are characterized by extraordinary photochemical properties rendering them of particular interest for switching the conformation of biomolecules with visible light. Current developments afford synthetic access to unprecedented diazocine derivatives promising particular opportunities in photocontrol of proteins and biological systems. In this work, the well-established approach of photocontrolling the secondary structure of α-helices was exploited using a diazocine to reversibly fold and unfold the tertiary structure of a small protein. The protein of choice was the globulary folded Trp-cage, a widely used model system for the elucidation of protein folding pathways. A specifically designed, short and rigid dicarboxy-functionalized diazocine-based cross-linker was attached to two solvent-exposed side chains at the α-helix of the miniprotein through the use of a primary amine-selective active ester. This cross-linking strategy is orthogonal to the common cysteine-based chemistry. The cross-linked Trp-cage was successfully photoisomerized and exhibited a strong correlation between protein fold and diazocine isomeric state. As determined by NMR spectroscopy, the cis-isomer stabilized the fold, while the trans-isomer led to complete protein unfolding. The successful switching of the protein fold in principle demonstrates the ability to control protein function, as the activity depends on their structural integrity.

Photoswitchable Azo- and Diazocine-Functionalized Derivatives of the VEGFR-2 Inhibitor Axitinib.

In this study, we aimed at the application of the concept of photopharmacology to the approved vascular endothelial growth factor receptor (VEGFR)-2 kinase inhibitor axitinib. In a previous study, we found out that the photoisomerization of axitinib's stilbene-like double bond is unidirectional in aqueous solution due to a competing irreversible [2+2]-cycloaddition. Therefore, we next set out to azologize axitinib by means of incorporating azobenzenes as well as diazocine moieties as photoresponsive elements. Conceptually, diazocines (bridged azobenzenes) show favorable photoswitching properties compared to standard azobenzenes because the thermodynamically stable Z-isomer usually is bioinactive, and back isomerization from the bioactive E-isomer occurs thermally. Here, we report on the development of different sulfur-diazocines and carbon-diazocines attached to the axitinib pharmacophore that allow switching the VEGFR-2 activity reversibly. For the best sulfur-diazocine, we could verify in a VEGFR-2 kinase assay that the Z-isomer is biologically inactive (IC50 >> 10,000 nM), while significant VEGFR-2 inhibition can be observed after irradiation with blue light (405 nm), resulting in an IC50 value of 214 nM. In summary, we could successfully develop reversibly photoswitchable kinase inhibitors that exhibit more than 40-fold differences in biological activities upon irradiation. Moreover, we demonstrate the potential advantage of diazocine photoswitches over standard azobenzenes.

Coverage-Controlled Superstructures of C3 -Symmetric Molecules: Honeycomb versus Hexagonal Tiling.

The competition between honeycomb and hexagonal tiling of molecular units can lead to large honeycomb superstructures on surfaces. Such superstructures exhibit pores that may be used as 2D templates for functional guest molecules. Honeycomb superstructures of molecules that comprise a C3 symmetric platform on Au(111) and Ag(111) surfaces are presented. The superstructures cover nearly mesoscopic areas with unit cells containing up to 3000 molecules, more than an order of magnitude larger than previously reported. The unit cell size may be controlled by the coverage. A fairly general model was developed to describe the energetics of honeycomb superstructures built from C3 symmetric units. Based on three parameters that characterize two competing bonding arrangements, the model is consistent with the present experimental data and also reproduces various published results. The model identifies the relevant driving force, mostly related to geometric aspects, of the pattern formation.