RESUMO
Naive pluripotent stem cells have the highest developmental potential but their in vivo existence in the blastocyst is transient. Here we report a blastocyst motif substrate for the in vitro reversion of mouse and human pluripotent stem cells to a naive state. The substrate features randomly varied microstructures, which we call motifs, mimicking the geometry of the blastocyst. Motifs representing mouse-blastocyst-scaled curvature ranging between 15 and 62 mm-1 were the most efficient in promoting reversion to naivety, as determined by time-resolved correlative analysis. In these substrates, apical constriction enhances E-cadherin/RAC1 signalling and activates the mechanosensitive nuclear transducer YAP, promoting the histone modification of pluripotency genes. This results in enhanced levels of pluripotency transcription factor NANOG, which persist even after cells are removed from the substrate. Pluripotent stem cells cultured in blastocyst motif substrates display a higher development potential in generating embryoid bodies and teratomas. These findings shed light on naivety-promoting substrate design and their large-scale implementation.
RESUMO
Sequentially coupling two material functions requires matching the output from the first with the input of the second function. Here, magnetic heating controls thermal actuation of a hybrid composite in a challenging system environment causing an elevated level of heat loss. The concept is a hierarchical design consisting of an inner actuator of nanocomposite material, which can be remotely heated by exposure to an alternating magnetic field (AMF) and outer layers of a porous composite system with a closed pore morphology. These porous layers act as heat insulators and as barriers to the surrounding water. By exposure to the AMF, a local bulk temperature of 71 °C enables the magnetic actuation of the device, while the temperature of the surrounding water is kept below 50 °C. Interestingly, the heat loss during magnetic heating leads to an increase of the water phase (small volume) temperature. The temperature increase is able to sequentially trigger an adjacent thermal actuator attached to the actuator composite. In this way it could be demonstrated how the AMF is able to initiate two kinds of independent actuations, which might be interesting for robotics operating in aqueous environments.
Assuntos
Magnetismo , Nanocompostos/química , Teste de Materiais , Temperatura , Água/químicaRESUMO
Remaining uremic toxins in the blood of chronic renal failure patients represent one central challenge in hemodialysis therapies. Highly porous poly(ether imide) (PEI) microparticles have been recently introduced as candidate absorber materials, which show a high absorption capacity for uremic toxins and allow hydrophilic surface modification suitable for minimization of serum protein absorption. In this work, the effects of extracts prepared from PEI microparticles modified by nucleophilic reaction with low molecular weight polyethylene imine (Pei) or potassium hydroxide (KOH), on human monocytic (THP-1) cells are studied. The obtained results suggested that the extracts of Pei and KOH modified PEI absorbers have no negative effect on THP-1 cell viability and do not initiate the critical differentiation towards macrophages. The extracts did not enhance transcript or protein levels of investigated proinflammatory markers in THP-1 cells, namely, TNFµ, MCP1, IL6 and IL8. Based on these findings such modified PEI microparticles should be qualified for further pre-clinical evaluation i.e. in an in vivo animal experiment.
Assuntos
Micropartículas Derivadas de Células/química , Éter/química , Imidas/química , Macrófagos/metabolismo , Contagem de Células , Diferenciação Celular , Humanos , Monócitos/metabolismoRESUMO
Fine tuning of the substrate properties to modulate the function of mesenchymal stem cells (MSCs) has emerged as an attractive strategy to optimize their therapeutic potential. In the context of the mechanotransduction process, the conformational change of integrin (integrin activation) plays a critical role in perceiving and transmitting various signals. In this study, polymeric cell culture inserts with defined bottom roughness were fabricated as a model system for cell cultivation. We showed that the conformational change of integrin and its downstream signaling cascade of human adipose-derived mesenchymal stem cells (hADSCs) could be modulated by the curvature of the cell-material interface. The curvature of the substrate surface with a roughness in the size range of a single cell could strongly increase the high-affinity ß1 integrin level of hADSCs without alteration of the total ß1 integrin level. Further, the integrin downstream FAK/ERK and Rho/ROCK pathways were activated and resulted in upregulated VEGF secretion of hADSCs. A conditioned medium on such a surface exhibited a strong pro-angiogenic effect, with an increased formation of the tubular structure, a higher migration velocity of endothelial cells and an enhanced blood vessel density in an ex vivo hen's egg test-chorioallantoic membrane (HET-CAM). These results highlighted the clinical potential to manipulate the topographic features of the cell culture substrate, whereby to regulate integrin affinity states and further control MSC functions.
RESUMO
Water-blown polyurethane (PU) foams are of enormous technological interest as they are widely applied in various fields, i.e., consumer goods, medicine, automotive or aerospace industries. The discovery of the one-way shape-memory effect in PU foams provided a fresh impetus for extensive investigations on porous polymeric actuators over the past decades. High expansion ratios during the shape-recovery are of special interest when big volume changes are required, for example to fill an aneurysm during micro-invasive surgery or save space during transportation. However, the need to program the foams before each operation cycle could be a drawback impeding the entry of shape-memory polymeric (SMP) foams to our daily life. Here, we showed that a reversible shape-memory effect (rSME) is achievable for polyurethane water-blown semicrystalline foams. We selected commercially available crystallizable poly(ε-caprolactone)-diols of different molecular weight for foams synthesis, followed by investigations of morphology, thermal, thermomechanical and shape-memory properties of obtained compositions. Densities of synthesized foams varied from 110 to 180 kgâm-3, while peak melting temperatures were composition-dependent and changed from 36 to 47 °C, while the melting temperature interval was around 15 K. All semicrystalline foams exhibited excellent one-way SME with shape-fixity ratios slightly above 100% and shape-recovery ratios from the second cycle of 99%. The composition with broad distribution of molecular weights of poly(ε-caprolactone)-diols exhibited an rSME of about 12% upon cyclic heating and cooling from Tlow = 10 °C and Thigh = 47 °C. We anticipate that our experimental study opens a field of systematic investigation of rSMEs in porous polymeric materials on macro and micro scale and extend the application of water-blown polyurethane foams to, e.g., protective covers with zero thermal expansion or even cushions adjustable to a certain body shape.
RESUMO
Stress relaxation can strongly influence the shape-memory capability of polymers. Recently a modified Maxwell-Wiechert model comprising two Maxwell units and a single spring unit in parallel has been introduced to successfully describe the shape recovery characteristics of amorphous polyether urethanes. In this work we explored whether such a modified Maxwell-Wiechert model is capable to describe the stress relaxation behavior of a semi-crystalline multiblock copolymer named PCL-PIBMD, which consists of crystallizable poly(É-caprolactone) (PCL) segments and crystallizable poly(3S-isobutylmorpholine-2,5-dione) (PIBMD) segments. The stress relaxation behavior of PCL-PIBMD was explored after uniaxial deformation to different strains ranging from 50 to 900% with various strain rates of 1 or 10 or 50 mm·min -1. The modeling results indicated that under the assumption that in PCL-PIBMD both PCL and PIBMD blocks have narrow molecular weight distributions and are arranged in sequence, the two relaxation processes can be related to the amorphous PCL and PIBMD domains and the spring element can be associated to the PIBMD crystalline domains. The first Maxwell unit representing the faster relaxation process characterized by the modulus E1 and the relaxation time τ1 is related to the amorphous PCL domains (which are in the rubbery state), while the second Maxwell unit (E2 ; τ2) represents the behavior of the amorphous PIBMD domains, which are in the glassy state at 50 °C. Increasing strain rates resulted in an increase of E1 and a significant reduction in τ1, whereas the elastic modulus as well as the relaxation time related to the amorphous PIBMD domains remained almost constant. When a higher deformation was applied (É ≥ 200% ) lower values for the elastic moduli of the three model elements were obtained. In general the applied model was also capable to describe the relaxation behavior of PCL-PIBMD at a deformation temperature of 20 °C, where additional crystalline PCL domains are existent. The presented approach using a modified Maxwell-Wiechert model to analyze the stress relaxation behavior can be useful to understand the changes in structure-function relation of amorphous as well as semi-crystalline polymers occurring during its uniaxial deformation.
Assuntos
Butanos/química , Caproatos/química , Lactonas/química , Morfolinas/química , Polímeros/química , Estresse Mecânico , Simulação por Computador , Cristalização , Módulo de Elasticidade , Substâncias Viscoelásticas/químicaRESUMO
AIM: Multifunctional polymer-based biomaterials, which combine degradability with a shape-memory capability and in this way enable the design of actively moving implants such as self-anchoring implants or controlled release systems, have been recently introduced. Of particular interest are approved degradable polymers such as poly(L-lactide) (PLLA), which can be easily functionalized with a shape-memory effect. In the case of semicrystalline PLLA, the glass transition can be utilized as shape-memory switching domain. METHODS: In this work we applied a fully atomistic molecular dynamics simulation to study the shape-memory behavior of PLLA. A heating-deformation-cooling programming procedure was applied to atomistic PLLA packing models followed by a recovery module under stress-free conditions allowing the shape recovery. The recovery was simulated by heating the samples from Tlow = 250 K to Thigh = 500 K with different heating rates ß of 125, 40 and 4 K·ns(-1). RESULTS: We could demonstrate that the obtained strain recovery rate (Rr) was strongly influenced by the applied simulation time and heating rate, whereby Rr values in the range from 46% to 63% were achieved. On its own the application of a heating rate of 4 K·ns(-1) enabled us to determine a characteristic switching temperature of Tsw = 473 K for the modeled samples. CONCLUSIONS: We anticipate that the atomistic modeling approach presented should be capable of enabling further study of Tsw with respect to the molecular structure of the investigated SMP and therefore could be applied in the context of design and development of new shape-memory (bio)materials.
Assuntos
Materiais Biocompatíveis/química , Poliésteres/química , Cinética , Simulação de Dinâmica Molecular , Temperatura de TransiçãoRESUMO
AIM: The hydrolytic degradation behavior of degradable aliphatic polyester-based polymers is strongly influenced by the up-take or transport of water into the polymer matrix and also the hydrolysis rate of ester bonds. METHODS: We examined the volumetric swelling behavior of poly[(rac-lactide)-co-glycolide] (PLGA) and PLGA-based polyurethanes (PLGA-PU) with water contents of 0 wt%, 2 wt% and 7 wt% water at 310 K using a molecular modeling approach. Polymer systems with a number average molecular weight of Mn = 10,126 gâmol(-1) were constructed from PLGA with a lactide content of 67 mol%, whereby PLGA-PU systems were composed of five PLGA segments with Mn = 2052 gâmol(-1), which were connected via urethane linkers originated from 2,2,4-trimethyl hexamethylene-1,6-diisocyanate (TMDI), hexamethyl-1,6-diisocyanate (HDI), or L-lysine-1,6-diisocyanate (LDI). RESULTS: The calculated densities of the dry PLGA-PU systems were found to be lower than for pure PLGA. The obtained volumetric swelling of the PLGA-PU was depending on the type of urethane linker, whereby all swollen PLGA-PUs contained larger free volume distribution compared to pure PLGA. The mean square displacement curves for dry PLGA and PLGA-PUs showed that urethane linker units reduce the mobility of the polymer chains, while an increase in backbone atoms mobility was found, when water was added to these systems. Consequently, an increased water uptake of PLGA-PU matrices combined with a higher mobility of the chain segments should result in an accelerated hydrolytic chain scission rate in comparison to PLGA. CONCLUSIONS: It can be anticipated that the incorporation of urethane linkers might be a helpful tool to adjust the degradation behavior of polyesters.
Assuntos
Ácido Láctico/química , Ácido Poliglicólico/química , Uretana/química , Hidrólise , Modelos Químicos , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Poliuretanos/química , Solubilidade , Água/químicaRESUMO
BACKGROUND: Magnetic composites of thermosensitive shape-memory polymers (SMPs) and magnetite nanoparticles (MNPs) allow noncontact actuation of the shape-memory effect in an alternating magnetic field. In this study, we investigated whether the magnetic heating capability of cross-linked poly(ε-caprolactone)/MNP composites (cPCLC) could be improved by covalent coating of MNPs with oligo(ε-caprolactone) (OCL). METHODS: Two different types of cPCLC containing uncoated and OCL-coated MNP with identical magnetite weight content were prepared by thermally induced polymerization of poly(ε-caprolactone) diisocyanatoethyl methacrylate. Both cPCLCs exhibited a melting transition at Tm = 48°C, which could be used as switching transition. RESULTS: The dispersion of the embedded nanoparticles within the polymer matrix could be substantially improved, when the OCL-coated MNPs were used, as visualized by scanning electron microscopy. We could further demonstrate that in this way the maximal achievable bulk temperature (Tbulk) obtained within the cPCLC test specimen in magnetic heating experiments at a magnetic field strength of H = 30 kA·m(-1) could be increased from Tbulk = 48°C to Tbulk = 74°C.
Assuntos
Nanopartículas de Magnetita/química , Poliésteres/química , Campos Magnéticos , Polimerização , Temperatura de TransiçãoRESUMO
There is a need to create cell- and histocompatible implant materials, which might temporarily replace the mechanical function of a native tissue for regenerative therapies. To match the elastic behavior of the native tissue two different multiblock co-polymers were investigated: PDC, consisting of poly(p-dioxanone) (PPDO)/poly(ε-caprolactone) (PCL), and PDD, based on PPDO/poly((adipinate-alt-1,4-butanediol)-co-(adipinate-alt-ethylene glycol)-co-adipinate-alt-diethylene glycol) (Diorez). PDC is capable of a shapememory effect. Both multiblock co-polymers show an improved elasticity compared to materials applied in established vascular prosthesis. PDD is softer than PDC at 20°C, while PDC maintains its elasticity at 37°C. Thermodynamic characteristics indicate a more polar surface of PDD. Low cell adhesion was found on surfaces with low molar free energy of hysteresis (ΔG) derived from contact angle measurements in wetting and dewetting mode and high cell adhesion on high-ΔG surfaces. An increasing content of PCL in PDC improved cell adhesion and spreading of human umbilical vein endothelial cells. The prothrombotic potential of PDD is higher than PDC. Finally, it is concluded that PDC is a promising material for vascular tissue engineering because of its improved elastic properties, as well as balanced prothrombotic and anti-thrombotic properties with endothelial cells.
Assuntos
Vasos Sanguíneos/fisiologia , Polímeros/química , Regeneração/fisiologia , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Células 3T3 , Adipatos/química , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/metabolismo , Vasos Sanguíneos/anatomia & histologia , Adesão Celular , Proliferação de Células , Células Cultivadas , Dioxanos/química , Células Endoteliais da Veia Umbilical Humana/citologia , Células Endoteliais da Veia Umbilical Humana/metabolismo , Humanos , Teste de Materiais , Camundongos , Estrutura Molecular , Poliésteres/química , Propriedades de SuperfícieRESUMO
The development, validation, and first applications of a generalized version of an inverse Widom method are described. It permits the calculation of solubility coefficients for molecules as large as, e.g., benzene in all polymers for which reasonable forcefield parameters exist. Predicting the solubility is a key to the knowledge-based design of materials utilized to solve permeability related problems. For long time, particle insertion methods, such as the Widom method, were the only way to predict solubilities from molecular models, but they, in most cases, only worked well for rather small penetrants (e.g., H2, O2, N2). Therefore, a few years ago, a new particle deletion algorithm "DPD" was introduced by Boulougouris, Economou, and Theodorou to overcome this problem in principle. The related computer code was, however, only applicable to special, relatively simple model systems. As application examples for the generalized version described here, solubility calculations for nitrogen, oxygen, and benzene in poly(dimethyl siloxane) are presented.
Assuntos
Algoritmos , Dimetilpolisiloxanos/química , Solventes/química , Benzeno/química , Modelos Moleculares , Nitrogênio/química , Oxigênio/química , Tamanho da Partícula , Solubilidade , Água/químicaRESUMO
The hemocompatibility of four different wettable polymer membranes, namely Cuprophan (CE), polyether-polycarbonate (PC-PE), polysulfone (PSU), and polyetherimide (PEI), was investigated with respect to fibrinogen (Fng) adsorption and platelet adhesion/activation. In order to estimate the polar and dispersion components of the surface free energy, contact angles using water/vapor and water/n-hexadecane systems were measured. Adsorption of fibrinogen was studied using fluorescence-labeled protein. The adsorption isotherms showed that the amount and the affinity of adsorbed Fng increased with decreasing surface wettability of the membranes, which correlates with the dispersion and polar components of the surface free energy. The conformational changes of adsorbed Fng were detected by measuring the difference between monoclonal antibody binding to the conformation-sensitive epitope in the D-domain and the binding of polyclonal anti-Fng antibody. The anticipated conformational/orientational changes were greater for PEI and PSU membranes (the least wettable membranes) and negligible for the more wettable PC-PE and CE membranes. In addition, a possible relationship with the degree of platelet activation was found, showing negligible platelet adhesion on PC-PE and CE, but high platelet adhesion on PEI and PSU. Furthermore, platelets were spread to a large extent on PEI, while the formation of aggregates was observed on PSU. This may correspond to the anticipated differences in the conformational state of Fng on both membranes.