RESUMO
Stepwise oxidative addition of copper(I) complexes to form copper(III) species via single electron transfer (SET) events has been widely proposed in copper catalysis. However, direct observation and detailed investigation of these fundamental steps remain elusive owing largely to the typically slow oxidative addition rate of copper(I) complexes and the instability of the copper(III) species. We report herein a novel aryl-radical-enabled stepwise oxidative addition pathway that allows for the formation of well-defined alkyl-CuIII species from CuI complexes. The process is enabled by the SET from a CuI species to an aryl diazonium salt to form a CuII species and an aryl radical. Subsequent iodine abstraction from an alkyl iodide by the aryl radical affords an alkyl radical, which then reacts with the CuII species to form the alkyl-CuIII complex. The structure of resultant [(bpy)CuIII(CF3)2(alkyl)] complexes has been characterized by NMR spectroscopy and X-ray crystallography. Competition experiments have revealed that the rate at which different alkyl iodides undergo oxidative addition is consistent with the rate of iodine abstraction by carbon-centered radicals. The CuII intermediate formed during the SET process has been identified as a four-coordinate complex, [CuII(CH3CN)2(CF3)2], through electronic paramagnetic resonance (EPR) studies. The catalytic relevance of the high-valent organo-CuIII has been demonstrated by the C-C bond-forming reductive elimination reactivity. Finally, localized orbital bonding analysis of these formal CuIII complexes indicates inverted ligand fields in σ(Cu-CH2) bonds. These results demonstrate the stepwise oxidative addition in copper catalysis and provide a general strategy to investigate the elusive formal CuIII complexes.
RESUMO
Alkanes, ideal raw materials for industrial chemical production, typically exhibit limited reactivity due to their robust and weakly polarized C-H bonds. The challenge lies in selectively activating these C-H bonds under mild conditions. To address this challenge, various C-H activation mechanisms have been developed. Yet, classifying these mechanisms depends on the overall stoichiometry, which can be ambiguous and sometimes problematic. In this study, we utilized density functional theory calculations combined with intrinsic bond orbital (IBO) analysis to examine electron flow in the four primary alkane C-H activation mechanisms: oxidative addition, σ-bond metathesis, 1,2-addition, and electrophilic activation. Methane was selected as the representative alkane molecule to undergo C-H heterolytic cleavage in these reactions. Across all mechanisms studied, we find that the CH3 moiety in methane consistently uses an electron pair from the cleaved C-H bond to form a σ-bond with the metal. Yet, the electron pair that accepts the proton differs with each mechanism: in oxidative addition, it is derived from the d-orbitals; in σ-bond metathesis, it resulted from the metal-ligand σ-bonds; in 1,2-addition, it arose from the π-orbital of the metal-ligand multiple bonds; and in electrophilic activation, it came from the lone pairs on ligands. This detailed analysis not only provides a clear visual understanding of these reactions but also showcases the ability of the IBO method to differentiate between mechanisms. The electron flow discerned from IBO analysis is further corroborated by results from absolutely localized molecular orbital energy decomposition analysis, which also helps to quantify the two predominant interactions in each process. Our findings offer profound insights into the electron dynamics at play in alkane C-H activation, enhancing our understanding of these critical reactions.
RESUMO
exo-6b2-Methyl-substituted pentabenzocorannulene (exo-PBC-Me) was synthesized by the palladium-catalyzed cyclization of 1,2,3-triaryl-1H-cyclopenta[l]phenanthrene. Its bowl-shaped geometry with an sp3 carbon atom in the backbone and a methyl group located at the convex (exo) face was verified by X-ray crystallography. According to DFT calculations, the observed conformer is energetically more favorable than the endo one by 39.9â kcal/mol. Compared to the nitrogen-doped analogs with intact π-conjugated backbones (see the main text), exo-PBC-Me displayed a deeper bowl depth (avg. 1.93â Å), redshifted and broader absorption (250-620â nm) and emission (from 585 to more than 850â nm) bands and a smaller optical HOMO-LUMO gap (2.01â eV). exo-PBC-Me formed polar crystals where all bowl-in-bowl stacking with close π â â â π contacts is arranged unidirectionally, providing the potential for applications as organic semiconductors and pyroelectric materials. This unusual structural feature, molecular packing, and properties are most likely associated with the assistance of the methyl group and the sp3 carbon atom in the backbone.
RESUMO
A series of hexapole helicenes (HHs) and nonuple helicenes (NHs) were prepared from 1,3,5-tris[2-(arylethynyl)phenyl]benzene through two steps, namely, iodocyclization and subsequent palladium-catalyzed annulation with ortho-bromoaryl carboxylic acids. The crucial advantages of this synthetic method are the facile introduction of substituents, high regioselectivity, and efficient backbone extension. Three-dimensional structures of three C1-symmetric HHs and one C3-symmetric NH were elucidated using X-ray crystallography. Unlike most conventional multiple helicenes, the HHs and NHs investigated herein possess a unique structural feature where some double helical moieties share a terminal naphthalene unit. Chiral resolution of a HH and an NH was successfully achieved, and the enantiomerization barrier (ΔH) of the HH was experimentally determined to be 31.2 kcal/mol. A straightforward method for predicting the most stable diastereomer was developed based on density functional theory calculations and structural considerations. It was found that the relative potential energies (ΔHrs) of all diastereomers for two HHs and one NH can be obtained using minimal computational effort to analyze the types, helical configurations, numbers, and ΔH(MP-MM)s [= H(M,P/P,M) - H(M,M/P,P)] of the double helicenyl fragments.
RESUMO
A simple visible-light-induced CuCl-catalyzed synthesis was developed for highly functionalized carbon-centered compounds (α-alk/aryloxy-α-diaryl/alkylaryl-acetaldehydes/ketones) at room temperature using benzoquinone, alkyl/aryl alcohol, and alkyl/aryl terminal/internal alkynes. Late-stage functionalized compounds show good antifungal activities, especially against Candida krusei fungal strain, in inâ vitro experiments (the Broth microdilution method). Moreover, toxicity tests (zebrafish egg model experiments) indicated that these compounds had negligible cytotoxicity. The green chemistry metrics (E-factor value is 7.3) and eco-scale (eco-scale value is 58.8) evaluations show that the method is simple, mild, highly efficient, eco-friendly, and environmentally feasible.
Assuntos
Antifúngicos , Cobre , Animais , Antifúngicos/química , Catálise , Cloretos , Cobre/química , Halogênios , Cetonas/química , Temperatura , Peixe-Zebra , OxirreduçãoRESUMO
In the search for efficient and inexpensive electrocatalysts for the hydrogen evolution reaction (HER), the hydrogen binding energy is often used as a descriptor to represent the catalytic activity. The success of this approach relies on the Brønsted-Evans-Polanyi (BEP) relationship. In this study, we used constant electrode potential density functional theory calculations to examine this relationship. Eight fcc metals with a low hydrogen adsorption concentration of 1/9 were used as the model systems. We found that the HER kinetic barriers are indeed correlated to the . Both the s of the hollow site and less favourable top site correlate to the kinetic barriers; however, the correlation is better for the latter. This behaviour leads to a set of equations for estimating the HER kinetic barriers with improved accuracy that can be used to predict the HER performance of the materials with a low hydrogen adsorption concentration. This work demonstrates the importance of calculating the of a suitable adsorption site to establish good BEP relationships.
RESUMO
Stereochemical-controlled hydrogen bond donors play essential roles in the pharmaceutical industry. Consequently, organic molecules that bear difluoromethyl (CF2H) groups at chiral centers are emerging as pivotal components in pharmaceuticals due to their distinct hydrogen-bonding property. However, a general approach for introducing CF2H groups in an enantioselective manner remained elusive. Here, we show that enantioconvergent difluoromethylation of racemic alkyl electrophiles, through alkyl radical intermediates, represents a new strategy for constructing CF2H-containing stereocenters. This strategy is enabled by using copper catalysts bound with a chiral diamine ligand bearing electron-deficient phenyl groups, and a nucleophilic difluoromethyl-zinc reagent. This method allows for the high-yield conversion of a diverse range of alkyl halides into their alkyl-CF2H analogs with excellent enantioselectivity (up to 99% e.e.). Mechanistic studies, supported by DFT calculations, revealed a route involving asymmetric difluoromethylation of alkyl radicals and crucial non-covalent interactions in the enantio-determining steps.
RESUMO
With the relay process of Ag(I)/Au(I) catalysts, a one-pot synthesis of skeletally rearranged (1-hydroxymethylidene)indene derivatives from 2-alkynylbenzaldehydes and α-diazo esters is described. This cascade sequence involves Au(I)-catalyzed 5-endo-dig attack of highly enolizable aldehydes at the tethered alkynes, leading to carbocyclizations with a formal 1,3-hydroxymethylidene transfer. On the basis of density functional theory calculations, the mechanism likely involves formation of cyclopropylgold carbenes, followed by an appealing 1,2-cyclopropane migration.
RESUMO
This work reports cascade cyclization between 1-allenyl-2-alkynylbenzenes and nitrosoarenes. When these two components reacted alone under N2, N,O-functionalized indane-fused isoxazolidines 3 were obtained selectively. DFT calculations verify that this reaction sequence involves unprecedented nitrone/alkyne cycloadditions, followed by diradical rearrangement.