Intraoperative radiographic method of locating the radial head safe zone: the bicipital tuberosity view.

HYPOTHESIS: The proximal radius is asymmetrical, is mostly articular, and rotates through a large arc of motion. Because of these anatomic factors, there is limited space for hardware. This is magnified in the setting of complex fractures. The portion of the radial head where a radial head plate can be placed without compromising forearm motion has been termed the "safe zone." We hypothesized that the bicipital tuberosity could be used as a reproducible intraoperative fluoroscopic landmark to confirm radial head plate position in the safe zone. METHODS: Seventeen cadaveric radii were evaluated. First, the anatomic safe zone was identified using the method previously described by Caputo et al. A proximal radial plate was then placed in the center of this safe zone. The relationship of the plate to the tuberosity was evaluated, and the angle from the point of the greatest tuberosity profile to the center of the safe zone was measured. RESULTS: The maximum profile of the bicipital tuberosity is 166° ± 10° from the center of the safe zone as described by Caputo et al. By use of radiographic imaging, a radial head plate placed directly opposite the bicipital tuberosity will be within the safe zone. This position can be ascertained fluoroscopically with an anteroposterior view of the proximal forearm, in which the surgeon rotates the forearm into full supination. The plate should be placed opposite the bicipital tuberosity as seen on the greatest profile at maximum supination. With this method, the plate will be consistently placed within the safe zone. CONCLUSION: The bicipital tuberosity can be used as a consistent radiographic anatomic landmark to ensure proximal radial plate placement within the safe zone. If the proximal radial head plate is placed 166° ± 10° opposite the bicipital tuberosity, a landmark easily identified on intraoperative imaging, the implant will be in the safe zone and will not impinge on the ulna in rotation.

Monteggia Fracture Dislocation.

SUMMARY: Monteggia fracture is a complex fracture consisting of a proximal ulna fracture with a dislocation of the radial head. This review article highlights the relevant anatomy, clinical evaluation, classification, surgical management, recent innovation, and advancements with treating these injuries. A thorough understanding of these fractures allows for detailed operative plans and reconstitution of normal anatomy.

Peri-articular fractures of the hand.

Peri-articular fractures of the hand are common injuries. Long-term consequences can be relatively innocuous or severely disabling. Due to the specific anatomy of the hand, avulsion fractures are likely more common here than anywhere else in the body and often occur at or near joints. The management of peri-articular fractures of the hand requires consideration of both the articular reduction and the status of ligament and tendon attachments. In general, these fractures can be treated non-operatively. Operative treatment can be percutaneous or open and should be individualized.

Predictors of Adverse Events in the Surgical Treatment of Adult Distal Humerus Fractures.

The purpose of this study was to identify surgical complications after distal humerus fracture fixation as well as correlations between these complications and patient variables. A total of 132 patients underwent open reduction and internal fixation of traumatic distal humerus fractures between October 2011 and June 2018. Included were adult patients who underwent surgical fixation and had more than 6 months of follow-up. Excluded were patients with inadequate radiographic imaging, less than 6 months of follow-up, and previous distal humerus surgery. Multivariate logistic regression models controlling for age and body mass index were used to determine preoperative factors predictive of postoperative complications. A total of 73 patients were included in this analysis. Surgical complications were reported for 17 patients. Reoperation was required for 13 patients. Open injury at presentation was predictive of delayed union. Predictors of subsequent elbow surgery included younger age, polytrauma, open fracture, and ulnar nerve injury at the time of injury. Radial nerve injury at the time of presentation was also a risk factor for postoperative radial nerve symptoms. Predictors of postoperative heterotopic ossification included older age. Thirty-one patients had an olecranon osteotomy during their open reduction and internal fixation and none went on to nonunion. There were 13 patients with ulnar nerve complications. Of these patients, 3 had undergone an ulnar nerve transposition. None of the other studied variables were predictors of complications, malunion, or nonunion at latest follow-up. Although open reduction and internal fixation is effective in treating distal humerus fractures, its complications cannot be overlooked. Open fractures are more likely to go on to delayed union. Ulnar nerve injury, open fracture, and polytrauma were predictive for reoperation. Older patients were less likely to have subsequent surgery but more likely to develop heterotopic ossification. By identifying at-risk patients, managing physicians can better prognosticate and counsel patients on their recovery. [Orthopedics. 2023;46(6):352-357.].

Distal biceps reconstruction: a long-term follow-up of the complications and durability of the single-incision power optimizing cost-effective (SPOC) repair.

Background: The Single-Incision Power Optimizing Cost-Effective Repair (SPOC) method reattaches the distal biceps tendon to its original posterior anatomic footprint and utilizes the anterior cortex of the supinated radius for fixation. The purpose of the study was to define the long-term complications and durability of the SPOC method. Methods: Two hundred and eighteen patients underwent the SPOC repair of distal biceps ruptures from 2008 to 2020, with 185 having at least 1-year follow-up data. The average follow-up was 50.1 months. Information regarding smoking, body mass index, interval between injury and surgery, peripheral nerve injury, heterotopic ossification, vascular injury, re-rupture, chronic regional pain syndrome, fracture of the radius, loss of motion, pain with use, and deformity were acquired. Results: No complication occurred beyond the third postoperative month. No patient complained of severe lateral antebrachial cutaneous nerve-related symptoms. Major complications exclusive of re-rupture occurred include 1 case of heterotopic ossification and 1 deep infection. Major complications with re-ruptures occurred in 9 patients (4.8%). Seven of the re-ruptures (78%) were associated with an unexpected forceful contraction within the first 4 weeks postop. All complications aside from 1 minor complication occurred in the chronic group. Long term follow-up revealed no re-ruptures and high satisfaction rate with return of strength, motion, and biceps profile. Conclusion: The safety profile of the SPOC repair is consistent with those of other published repairs. Major complications were associated with prolonged intervals between injury and reconstruction. Re-ruptures were associated with worker's compensation status and patient noncompliance with postoperative protocols.

A Medial Approach That Provides Ample Exposure of the Coronoid for Fracture Management.

We describe a medial approach to the coronoid where the flexor-pronator mass is released from its humeral origin by creating a proximally based tendinous flap. This technique facilitates access to the coronoid, preservation of the medial collateral ligament origin, and repair of the flexor-pronator mass. This approach has utility for all coronoid fracture variations but especially the O'Driscoll anteromedial subtype 3, which includes fractures of the sublime tubercle, the anteromedial facet, and the coronoid tip.

Linking the distal humerus columns in articular fracture fixation.

INTRODUCTION: Concerning rates of nonunion in articular distal humerus fractures indicate an unsolved problem. The fixation principles of O'Driscoll describe linking the fractured articular segment to the distal humerus columns with compression screws which creates a stable fixed angle construct. A novel device has been introduced which utilizes an interlocking beam through the articular segment to connect the distal aspect of the medial and lateral plates, creating a linked construct. We sought to evaluate the stability of this linked construct using an articular model of distal humerus fracture. MATERIALS AND METHODS: Ten matched pair specimens of 65 years of age or older were randomized to the use (LB group) or non-use (NLB group) of an interlocking beam to link the medial and lateral locking plates in fixation of an AO Type C3 fracture model. Outside of the linking beam, fixation between the matched pairs was consistent using 2.7 mm locking screws distally with fixed trajectories and +/- 2 mm lengths. RESULTS: Mean stiffness was 273 Newtons/mm in the LB group and 225 Newtons/mm in the NLB group (p = 0.001). Mean maximum displacement was 0.28 in the LB group and 0.93 mm in the NLB group (p = 0.006). Mean load to failure was 277 pounds in the LB group and 280 pounds in the NLB group (p = 0.94). DISCUSSION: Our results indicate that an interlocking beam which links the medial and lateral plates provides greater stability compared to a similar construct without an interlocking beam. We attribute this finding to the beam's double supported design which resists cantilever bending and provides robust compression of the fractured fragments.

Double Barrel Screw Fixation for Proximal Phalanx Fracture.

A variety of fixation options exist for treatment of unstable proximal phalanx fractures. Variables which require consideration include the strength of fixation, the invasiveness of the technique and the postoperative rehabilitation protocol. Here we present a minimally invasive technique for dual headless compression screw fixation of proximal phalanx fractures which reduces extensor tendon violation and allows early motion in the immediate postoperative period.

Avoiding articular breakthrough in screw fixation of radial head fractures.

Background: The radial head is anatomically complex, making fracture fixation challenging because of the difficult visualization of the articular surface. As a result, screw penetration into the radiocapitellar joint can often occur. To facilitate safe placement of screws tangential to the joint surface, we define an approximate and reliable distance from the articular rim of the radial head that can minimize the risk of articular breach. Methods: A Kirschner wire for cannulated drilling was placed tangential to the articular surface in 15 cadaveric proximal radii. The distance from the wire to the articular rim was measured 3 times. After insertion of a 3.5-mm compression screw, the radial head was divided in the coronal plane, bisecting the screw track, to visualize the cross section of the screw's position. Headless compression screws of 3.5 mm were placed the distance from the most proximal edge of the screw track to the radial head's articular surface was measured 3 times. Results: The average distance from the articular rim to the distal surface of the Kirschner wire was 5.1 mm. The average distance from the articular rim to the proximal edge of the cavity was 1.7 mm. The screw placement was subchondral and extra-articular in all cases. Conclusion: When fixing Mason type 2 articular radial head fractures with 3.5-mm headless compression screws placed tangential to the articular surface, maintaining a screw entry point about 5 mm distal to the articular surface of the radial head will minimize the possibility of articular screw breach. This position also places the screw into subchondral bone, providing the best bone quality for mechanical support.

Mitigation of Triceps Avulsion Fracture After Proximal Ulna Plate Fixation.

OBJECTIVES: Triceps avulsion fractures have become an increasingly common postoperative complication of olecranon fracture repair with proximal ulna plate (PUP) fixation. The purpose of this study is to create an efficient, reproducible mechanism to mitigate this issue. METHODS: Ten matched pair cadaveric specimens underwent a complete transverse osteotomy to simulate an olecranon fracture, followed by fracture reduction with a PUP. One arm from each pair underwent an additional augmented suture repair, where the triceps tendon was sutured directly to the plate. A custom jig was used to hold the specimen in position and apply a tensile force on the triceps until mechanical failure. RESULTS: All control specimens (without augmented suture repair) failed through a full-thickness triceps avulsion fracture at an average force of 967.7 N. The augmented suture-repaired specimens failed at an average force of 1204.3 N through partial avulsion fractures, widening of the osteotomy site, and triceps ruptures. CONCLUSIONS: Our study demonstrated that an augmented suture repair of PUP fixation for olecranon fractures is a simple and effective way to significantly increase fixation strength and change the potential failure mechanism.

Column-Specific Distal Radius Fracture Fixation.

SUMMARY: Despite the popularity and success of volar fixed angle plating, variations in distal radius fracture presentation underscore the importance of understanding different surgical treatment options to maximize patient outcomes. The 3-column theory of wrist mechanics provided the foundation for using a column-specific fixation approach. Implant placement within the ulnar column can be challenging because of anatomical constraints. Some have described "safe zones" for implant position to decrease the potential for tendon impingement. A thorough understanding of the surrounding anatomy can allow fixation decisions based on fracture fragment location. Literature reports have shown excellent results when using fragment specific fixation constructs and similar outcomes when comparing these constructs with volar locked plating. Achieving optimal outcomes in surgically treated distal radius fractures requires the surgeon to be competent along a spectrum of surgical approaches and fixation constructs.

Osteosarcoma of the pelvis: outcome analysis of surgical treatment.

UNLABELLED: Risk factors to explain the poor survival of patients with osteosarcoma of the pelvis are poorly understood. Therefore, we attempted to identify factors affecting survival and development of local recurrence and metastasis. We retrospectively reviewed 43 patients who had high-grade pelvic tumors and were treated surgically. Twenty lesions were chondroblastic, 10 fibroblastic, 11 osteoblastic, and one each was giant cell-rich and small cell osteosarcomas. At a median of 3.5 years (range, 0.3-21 years) postoperatively, 13 patients were alive with no evidence of disease. The overall and disease-free 5-year survival rates were 38% and 29%, respectively, at 5 years. Anatomic location, tumor size, and margin predicted survival. Fifteen patients (35%) had local recurrence. The 5-year cumulative incidence of recurrence with death as a competing risk factor was 34%. Location in the ilium and size of the tumor predicted local recurrence. Twenty-one (49%) of 43 patients had metastases develop. The cumulative incidence of metastasis with death as a competing risk factor was 48% at 5 years. Six patients who presented with metastasis had a worse survival than patients who had no evidence of metastasis at presentation (2-year survival, 33% versus 76%). If distant metastasis is diagnosed subsequent to primary treatment, aggressive therapy may be justified. LEVEL OF EVIDENCE: Level II, prognostic study. See the Guidelines for Authors for a complete description of levels of evidence.

The Vascularity and Osteogenesis of a Vascularized Flap for the Treatment of Scaphoid Nonunion: The Pedicle Volar Distal Radial Periosteal Flap.

Background: Vascularized periosteal flaps from the distal radius have been previously proposed. The purpose of this study was to investigate the vascularity and osteogenic potential of a vascularized volar distal radial periosteal flap for the treatment of scaphoid nonunion. Methods: In 5 fresh frozen cadavers, a rectangular periosteal flap was elevated from the distal radius with the pedicle just proximal to the watershed line. Latex dye was injected into the radial artery proximally and the vascularity of the flap characterized by microscopic evaluation. Patients with scaphoid nonunion were then treated with open reduction, internal fixation, and distal radius cancellous bone graft. Two groups of patients with midwaist nonunion scaphoid were then evaluated. The first group received the vascularized periosteal flap and the second group received a nonvascularized periosteal flap. A third group of proximal pole nonunions also received the vascularized flap. Results: Cadaveric dissections revealed that all of the injected flaps demonstrated vascularity to the distal edge of the flap. Vascularized flaps formed visible bone on imaging in 55% of cases. None of the nonvascularized flaps formed visible bone. In group 1, 12/12 midwaist nonunions united. In group 2, union was achieved in 6/6 of patients who completed the follow-up. In group 3, 6/7 proximal pole fractures united. Conclusions: Previously proposed vascularized periosteal flaps from the distal radius appear to possess notable osteogenic potential that may be of interest to surgeons treating scaphoid nonunion.

Dogs and Orthopaedic Injuries: Is There a Correlation With Breed?

OBJECTIVES: To identify the incidence of orthopaedic injuries secondary to dog bites, determine the responsible breeds, and assess the severity of injury by dog breed. DESIGN: Retrospective. SETTING: Single Level I trauma center. PATIENTS: Ninety-five patients treated for a dog bite that resulted in an orthopaedic injury between January 2010 and July 2016. INTERVENTION: Patients were treated according to their specific orthopaedic injury. MAIN OUTCOME MEASUREMENTS: Dog breed and type of orthopaedic injury. RESULTS: Thirty-nine percent of all dog bite-related emergency department visits resulted in an orthopaedic injury requiring specialist treatment. Of the 95 patients, 50% were the result of a pit bull terrier bite and 22% by a law enforcement dog. A total of 32% were attacked by multiple dogs. There was a 51% incidence of severe injury (amputation or fracture) with a significant association with breed. CONCLUSIONS: Thirty-nine percent of all dog bite-related emergency department visits at our facility resulted in an injury requiring orthopaedic treatment. Pit bull terrier bites were responsible for a significantly higher number of orthopaedic injuries and resulted in an amputation and/or bony injury in 66% of patients treated, whereas bites from law enforcement dogs and other breeds were less associated with severe injuries. LEVEL OF EVIDENCE: Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.