Periodic Operation of a Dynamic DNA Origami Structure Utilizing the Hydrophilic-Hydrophobic Phase-Transition of Stimulus-Sensitive Polypeptides.

Dynamic DNA nanodevices are designed to perform structure-encoded motion actuated by a variety of different physicochemical stimuli. In this context, hybrid devices utilizing other components than DNA have the potential to considerably expand the library of functionalities. Here, the reversible reconfiguration of a DNA origami structure using the stimulus sensitivity of elastin-like polypeptides is reported. To this end, a rectangular sheet made using the DNA origami technique is functionalized with these peptides and by applying changes in salt concentration the hydrophilic-hydrophobic phase transition of these peptides actuate the folding of the structure. The on-demand and reversible switching of the rectangle is driven by externally imposed temperature oscillations and appears at specific transition temperatures. Using transmission electron microscopy, it is shown that the structure exhibits distinct conformational states with different occupation probabilities, which are dependent on structure-intrinsic parameters such as the local number and the arrangement of the peptides on the rectangle. It is also shown through ensemble fluorescence resonance energy transfer spectroscopy that the transition temperature and thus the thermodynamics of the rectangle-peptide system depends on the stimuli salt concentration and temperature, as well as on the intrinsic parameters.

Solvent Properties of Water in Aqueous Solutions of Elastin-Like Polypeptide.

The phase-transition temperatures of an elastin-like polypeptide (ELP) with the (GVGVP)40 sequence and solvent dipolarity/polarizability, hydrogen-bond donor acidity, and hydrogen-bond acceptor basicity in its aqueous solutions were quantified in the absence and presence of different salts (Na2SO4, NaCl, NaClO4, and NaSCN) and various osmolytes (sucrose, sorbitol, trehalose, and trimethylamine N-oxide (TMAO)). All osmolytes decreased the ELP phase-transition temperature, whereas NaCl and Na2SO4 decreased, and NaSCN and NaClO4 increased it. The determined phase-transition temperatures may be described as a linear combination of the solvent's dipolarity/polarizability and hydrogen-bond donor acidity. The linear relationship established for the phase-transition temperature in the presence of salts differs quantitatively from that in the presence of osmolytes, in agreement with different (direct and indirect) mechanisms of the influence of salts and osmolytes on the ELP phase-transition temperature.

Utilizing avidity to improve antifreeze protein activity: a type III antifreeze protein trimer exhibits increased thermal hysteresis activity.

Antifreeze proteins (AFPs) are ice growth inhibitors that allow the survival of several species living at temperatures colder than the freezing point of their bodily fluids. AFP activity is commonly defined in terms of thermal hysteresis, which is the difference observed for the solution freezing and melting temperatures. Increasing the thermal hysteresis activity of these proteins, particularly at low concentrations, is of great interest because of their wide range of potential applications. In this study, we have designed and expressed one-, two-, and three-domain antifreeze proteins to improve thermal hysteresis activity through increased binding avidity. The three-domain type III AFP yielded significantly greater activity than the one- and two-domain proteins, reaching a thermal hysteresis of >1.6 °C at a concentration of <1 mM. To elucidate the basis of this increase, the data were fit to a multidomain protein adsorption model based on the classical Langmuir isotherm. Fits of the data to the modified isotherms yield values for the equilibrium binding constants for the adsorption of AFP to ice and indicate that protein surface coverage is proportional to thermal hysteresis activity.

Conjugation of type I antifreeze protein to polyallylamine increases thermal hysteresis activity.

Antifreeze proteins (AFPs) are ice binding proteins found in some plants, insects, and Antarctic fish allowing them to survive at subzero temperatures by inhibiting ice crystal growth. The interaction of AFPs with ice crystals results in a difference between the freezing and melting temperatures, termed thermal hysteresis, which is the most common measure of AFP activity. Creating antifreeze protein constructs that reduce the concentration of protein needed to observe thermal hysteresis activities would be beneficial for diverse applications including cold storage of cells or tissues, ice slurries used in refrigeration systems, and food storage. We demonstrate that conjugating multiple type I AFPs to a polyallylamine chain increases thermal hysteresis activity compared to the original protein. The reaction product is approximately twice as active when compared to the same concentration of free proteins, yielding 0.5 °C thermal hysteresis activity at 0.3 mM protein concentration. More impressively, the amount of protein required to achieve a thermal hysteresis of 0.3 °C is about 100 times lower when conjugated to the polymer (3 µM) compared to free protein (300 µM). Ice crystal morphologies observed in the presence of the reaction product are comparable to those of the protein used in the conjugation reaction.

Molecular architecture influences the thermally induced aggregation behavior of elastin-like polypeptides.

Elastin-like polypeptides are thermally responsive polymers that exhibit phase separation above a transition temperature. The effect of molecular architecture on the temperature responsive behavior of elastin-like polypeptide solutions was investigated by characterization of solutions of three-armed star polypeptides, linear polypeptides, and their mixtures. These biosynthesized polypeptides have precise lengths and amino acid sequences. Transition temperatures were measured as a function of molecular weight and solution concentration and compared to their linear counterparts. Like their linear counterparts, the transition temperature is linearly related to log concentration. A mathematical relationship was used to fit the transition temperature data of different polypeptide lengths to a volume-based concentration using the polymer coil volume. The results of this model suggest that the linear ELP is in a random coil conformation at the transition temperature while the three-armed ELP is in a compact extended coil conformation, consistent with different pathways for aggregation. Solutions containing both trimer and linear constructs have two transition temperatures, further supporting differing aggregation behaviors.

Two domains of RD3 antifreeze protein diffuse independently.

Antifreeze proteins (AFPs) make up a class of structurally diverse proteins that help to protect many organisms from freezing temperatures by inhibiting ice crystal growth at temperatures below the colligative freezing point. AFPs are typically small proteins with a relatively flat, slightly hydrophobic binding region that matches the lattice structure of a specific ice crystal plane. The only known two-domain AFP is RD3 from the Antarctic eel pout. It consists of two nearly identical type III domains connected by a nine-residue linker. This protein exhibits higher activity than the single-domain protein at low concentrations. The initial solution structure of RD3 revealed that the domains were aligned so that the binding regions were nearly coplanar, effectively doubling the surface area for binding. A more recent report suggests that the domains may not be aligned in solution but rather diffuse independently. To resolve the issue, we have measured the NMR residual dipolar couplings using alignment media of stretched gels and filamentous phage to determine the relative orientation of the domains. We find that the two domains of RD3 are free to move relative to each other, within the constraint of the flexible nine-residue linker. Our data show that there is no strongly preferred alignment in solution. Furthermore, the flexibility and length of the linker are sufficient to allow the two domains to have their binding faces in the same orientation and coplanar for simultaneous binding to an ice crystal surface.

Preparing Genes for Repetitive Elastin-Like Polypeptides Using Gibson Assembly.

Elastin-like polypeptides (ELPs) are stimuli-responsive polymers consisting of peptide repeat units from the elastin protein. Most commonly these materials are biosynthesized in E. coli using genes that have been built by standard molecular biology techniques. The inherent repetitive nature of these polypeptides makes the construction of genes that encode them more challenging than for typical recombinant proteins. Described here is a robust technique to produce genes encoding long chains of ELP through successive rounds of Gibson assembly that nearly double the ELP length with each cloning iteration. Using Gibson assembly to produce the genes for high molecular weight ELPs requires fewer steps and significantly less time than current techniques. This approach is modular and allows for the flexible assembly of ELPs with various compositions. The procedure can be adapted for preparing genes encoding other repetitive proteins.

Self-Assembled Active Plasmonic Waveguide with a Peptide-Based Thermomechanical Switch.

Nanoscale plasmonic waveguides composed of metallic nanoparticles are capable of guiding electromagnetic energy below the optical diffraction limit. Signal feed-in and readout typically require the utilization of electronic effects or near-field optical techniques, whereas for their fabrication mainly lithographic methods are employed. Here we developed a switchable plasmonic waveguide assembled from gold nanoparticles (AuNPs) on a DNA origami structure that facilitates a simple spectroscopic excitation and readout. The waveguide is specifically excited at one end by a fluorescent dye, and energy transfer is detected at the other end via the fluorescence of a second dye. The transfer distance is beyond the multicolor FRET range and below the Abbé limit. The transmittance of the waveguide can also be reversibly switched by changing the position of a AuNP within the waveguide, which is tethered to the origami platform by a thermoresponsive peptide. High-yield fabrication of the plasmonic waveguides in bulk was achieved using silica particles as solid supports. Our findings enable bulk solution applications for plasmonic waveguides as light-focusing and light-polarizing elements below the diffraction limit.

Multifunctional nanoparticles for use in theranostic applications.

Theranostics is a promising field that combines therapeutics and diagnostics into single multifunctional formulations. This field is driven by advancements in nanoparticle systems capable of providing the necessary functionalities. By utilizing these powerful nanomedicines, the concept of personalized medicine can be realized by tailoring treatment strategies to the individual. This review gives a brief overview of the components of a theranostic system and the challenges that designing truly multifunctional nanoparticles present. Considerations when choosing a class of nanoparticle include the size, shape, charge, and surface chemistry, while classes of nanoparticles discussed are polymers, liposomes, dendrimers, and polymeric micelles. Targeting to disease states can be achieved either through passive or active targeting which uses specific ligands to target receptors that are overexpressed in tumors and common targeting elements are presented. To image the interactions with disease states, contrast agents are included in the nanoparticle formulation. Imaging options include optical imaging techniques, computed tomography, nuclear based, and magnetic resonance imaging. The interplay between all of these components needs to be carefully considered when designing a theranostic system.

Size and shape characterization of thermoreversible micelles of three-armed star elastin-like polypeptides.

Three-armed star elastin-like polypeptides are shown to have the capability of self-assembling into micellar constructs at certain environmental conditions. Here, a study of the size distribution, shape, and molecular weight of these micelles at different salt concentrations and pH values is presented. Multiangle dynamic light scattering was used to study the formation, reversibility, and size of the micelles at different environmental conditions. On the basis of the salt concentration of the solution, two distinct size distribution regimes and a transition region were observed. Static light scattering was performed to study the molecular weight and geometrical anisotropy of the micelles in each regime. The anisotropic behavior and elongation of the particles were independently confirmed by depolarized dynamic light scattering, and a model for micelles at each regime was proposed. The size and molecular weight of the micelles were verified using viscosity measurements. The results of this study suggest that there is big jump in the size and molecular weight of the micelles from the first salt-dependent regime to the other, and the shape of the micelles changes from spheres to cylindrical micelles with a higher than 10:1 axis ratio.

Modified Langmuir isotherm for a two-domain adsorbate: derivation and application to antifreeze proteins.

Many organisms are exposed to subzero temperatures in nature and can survive these temperatures by the effect of antifreeze proteins (AFPs), which inhibit ice crystal growth and change the morphology of ice crystals. Although the effects of these proteins, such as recrystallization inhibition, ice growth inhibition, and crystal habit changes, are known, a conclusive description of the protein-ice crystal interaction including interaction energy, surface coverage, and lifetime of adsorbate has been elusive. In this study, we determine the binding equilibrium constant for a type III fish antifreeze protein and the relationship between thermal hysteresis and surface coverage for this protein. This is possible using experimental data from a two-domain antifreeze protein and its related single domain protein. The classical Langmuir isotherm is used to describe the equilibrium exchange of the single domain type III AFP molecules at the ice crystal surface, while a modification of the Langmuir isotherm is derived to describe the adsorption of the two-domain AFP. Because the protein adsorption is governed by different isotherm relationships, there are two independent data sets allowing the determination of the two unknowns of surface coverage and binding energy. The data yield an equilibrium binding constant of 1.9 mM(-1) for the type III AFP-ice interaction. The analysis results in a relationship between surface coverage and thermal hysteresis, as well as kinetic equations of the adsorption of the proteins onto the ice surface.

Activity of a two-domain antifreeze protein is not dependent on linker sequence.

The reported NMR structure of RD3, a naturally occurring two-domain antifreeze protein, suggests that the two nearly identical domains are oriented to allow simultaneous binding of their active regions to the ice surface. It is implied that the nine residues linking the two domains play a role in this alignment, but this has not been established. We have designed and expressed a modified form of RD3 that replaces the nine-residue linker with a generic sequence of one serine and eight glycine residues to test the importance of the linker amino acid sequence. The modified linker is shown to have significantly different characteristics compared to the original linker. Heteronuclear nuclear Overhauser effect experiments show that the new linker residues have more mobility than the linker residues in the native protein. Further, NMR data show that the folding of the C-terminal domain is somewhat perturbed by the altered linker. Finally, distributions of residual dipolar couplings indicate that the two domains tumble and move independently of each other. Nevertheless, the thermal hysteresis activity of the modified protein is indistinguishable from that of native RD3, proving that increased activity of the two-domain antifreeze protein is not dependent on structure of the linker.

Single-molecule optomechanical cycle.

Light-powered molecular machines are conjectured to be essential constituents of future nanoscale devices. As a model for such systems, we have synthesized a polymer of bistable photosensitive azobenzenes. Individual polymers were investigated by single-molecule force spectroscopy in combination with optical excitation in total internal reflection. We were able to optically lengthen and contract individual polymers by switching the azo groups between their trans and cis configurations. The polymer was found to contract against an external force acting along the polymer backbone, thus delivering mechanical work. As a proof of principle, the polymer was operated in a periodic mode, demonstrating for the first time optomechanical energy conversion in a single-molecule device.