Preparation and Evaluation of Bacterial Nanocellulose/Hyaluronic Acid Composite Artificial Cornea for Application of Corneal Transplantation.

The treatment for corneal damage requires donor corneal transplantation, but there is a serious scarcity of donor corneas worldwide. In this study, we aimed to design a new artificial cornea with good cytocompatibility, excellent optical properties and suture resistance, and great moisturizing properties. A new bacterial nanocellulose (BNC) membrane with anisotropic mechanical properties and high light transmission was produced in a horizontal rotary drum reactor. However, as a potential material for artificial keratoplasty, the transparency and mechanical properties of the new BNC membrane were not satisfactory. Thus, hyaluronic acid (HA) was introduced in the BNC to synthesize the BNC/HA composite membrane by using 1,4-butanediol diglycidyl ether (BDDE) as the chemical cross-linking agent. The micro-morphology, light transmittance, mechanical properties, water content, moisture retention ability, and cytocompatibility of the composite membranes were further evaluated. HA was fixed in the BNC network by the ether bond, and the composite membrane was found to have excellent light transmittance (up to 95.96%). The composite membrane showed excellent mechanical properties, for instance, its tensile strength exceeded the human normal intraocular pressure (IOP) (1.33-2.80 kPa), the maximum burst pressure was about 130 kPa, 46-97 times that of the normal IOP, and its suture force was close to that of the human amniotic membrane (0.1 N). Based on the three-dimensional network scaffold of BNC and the high water absorption characteristics of HA, the artificial cornea had high water content and high moisture retention ability. The rabbit corneal stromal cells cultured in vitro showed that the artificial cornea substitute had excellent cytocompatibility. BDDE is the most frequently used cross-linker in most HA products in the current cosmetic medicine industry owing to its long-term safety records for over 15 years. Therefore, the BNC/HA composite hydrogel cross-linked with BDDE has great potential in artificial keratoplasty or ocular surface repair.

Bacteria-engineered porous sponge for hemostasis and vascularization.

BACKGROUND: Hemostasis and repair are two essential processes in wound healing, yet early hemostasis and following vascularization are challenging to address in an integrated manner. RESULTS: In this study, we constructed a hemostatic sponge OBNC-DFO by fermentation of Komagataeibacter xylinus combined with TEMPO oxidation to obtain oxidized bacterial nanocellulose (OBNC). Then angiogenetic drug desferrioxamine (DFO) was grafted through an amide bond, and it promoted clot formation and activated coagulation reaction by rapid blood absorption due to the high total pore area (approximately 42.429 m2/g measured by BET). The further release of DFO stimulated the secretion of HIF-1α and the reconstruction of blood flow, thus achieving rapid hemostasis and vascularization in damaged tissue. This new hemostatic sponge can absorb water at a rate of approximate 1.70 g/s, rapidly enhancing clot formation in the early stage of hemostasis. In vitro and in vivo coagulation experiments (in rat tail amputation model and liver trauma model) demonstrated superior pro-coagulation effects of OBNC and OBNC-DFO to clinically used collagen hemostatic sponges (COL). They promoted aggregation and activation of red blood cells and platelets with shorter whole blood clotting time, more robust activation of endogenous coagulation pathways and less blood loss. In vitro cellular assays showed that OBNC-DFO prevailed over OBNC by promoting the proliferation of human umbilical vein endothelial cells (HUVECs). In addition, the release of DFO enhanced the secretion of HIF-1α, further strengthening vascularization in damaged skin. In the rat skin injury model, 28 days after being treated with OBNC-DFO, skin appendages (e.g., hair follicles) became more intact, indicating the achievement of structural and functional regeneration of the skin. CONCLUSION: This hemostatic and vascularization-promoting oxidized bacterial nanocellulose hemostatic sponge, which rapidly activates coagulation pathways and enables skin regeneration, is a highly promising hemostatic and pro-regenerative repair biomaterial.

In Situ Fabrication of Nerve Growth Factor Encapsulated Chitosan Nanoparticles in Oxidized Bacterial Nanocellulose for Rat Sciatic Nerve Regeneration.

Autograft is currently the gold standard in the clinical treatment of peripheral nerve injury (PNI), which, however, is limited by the availability of a donor nerve and secondary injuries. Nerve guidance conduits (NGC) provide a suitable microenvironment to promote the regeneration of injured nerves, which could be the substitutes for autografts. In this study, nerve growth factor (NGF) encapsulated chitosan nanoparticles (CSNPs) were first constructed in situ in an oxidized bacterial cellulose (OBC) conduit using the ion gel method after the introduction of a CS/NGF solution under pressure to enable a sustainable release of NGF. A novel NGF@CSNPs/OBC nanocomposite with antibacterial activity, biodegradability, and porous microstructure was successfully developed. In vitro experiments showed that the nanocomposite promoted the adhesion and proliferation of Schwann cells. When the nanocomposite was applied as NGC to repair the sciatic nerve defect of rats, a successful repair of the 10 mm nerve defect was observed after 4 weeks. At week 9, the diameter, morphology, histology, and functional recovery of the regenerated nerve was comparable to the autografts, indicating that the NGC effectively promoted the regeneration and function recovery of the nerve. In summary, the NGF@CSNPs/OBC as a novel NGC provides great potential in the treatment of PNI.

Improved Performance of Bacterial Nanocellulose Conduits by the Introduction of Silk Fibroin Nanoparticles and Heparin for Small-Caliber Vascular Graft Applications.

Bacterial nanocellulose (BNC) is a promising material for small-caliber artificial blood vessels, although promoting its anticoagulant properties with more rapid endothelialization would improve long-term patency. Silk fibroin nanoparticles (SFNP) were introduced into the luminal wall surface of BNC conduits both with and without heparin (Hep) through pressurization followed by fixation. Hep was introduced in two ways: (1) embedded within SF nanoparticles to form SF-HepNPs for construction of the BNC-SF-HepNP conduit and (2) chemically grafted onto BNC and BNC-SFNP to form BNC-Hep and BNC-SFNP-Hep conduits. Fourier transform infrared spectroscopy confirmed the formation of SF-HepNPs, although they did not incorporate into the fibrillar network due to their large size. Hep was successfully grafted onto BNC and BNC-SFNP, verified by toluidine blue staining. The hemocompatibility and cytocompatibility of the five samples (BNC, BNC-SFNP, BNC-SF-HepNP, BNC-Hep, and BNC-SFNP-Hep conduits) were compared in vitro. The heparinized BNC-Hep and BNC-SFNP-Hep conduits improved the anticoagulant properties, and BNC-SFNP-Hep promoted human umbilical vein endothelial cell proliferation but also controlled excessive human arterial smooth muscle cell proliferation, assisting rapid endothelialization and improving lumen patency. No significant inflammatory reaction or material degradation was observed after subcutaneous implantation for 4 weeks. Autogenous tissues were observed around the conduits, and cells infiltrated into the edges of all samples, the BNC-SFNP conduit causing the deepest infiltration, providing an appropriate microenvironment for angiogenesis when used in small-caliber blood vessel applications. Few inflammatory cells were found around the BNC-Hep and BNC-SFNP-Hep conduits. Thus, the anticoagulant properties of the BNC-SFNP-Hep conduit and its stimulation of endothelialization suggest that it has great potential in clinical applications as a small-caliber artificial blood vessel.

Comparison of tolerance of four bacterial nanocellulose-producing strains to lignocellulose-derived inhibitors.

BACKGROUND: Through pretreatment and enzymatic saccharification lignocellulosic biomass has great potential as a low-cost feedstock for production of bacterial nanocellulose (BNC), a high value-added microbial product, but inhibitors formed during pretreatment remain challenging. In this study, the tolerance to lignocellulose-derived inhibitors of three new BNC-producing strains were compared to that of Komagataeibacter xylinus ATCC 23770. Inhibitors studied included furan aldehydes (furfural and 5-hydroxymethylfurfural) and phenolic compounds (coniferyl aldehyde and vanillin). The performance of the four strains in the presence and absence of the inhibitors was assessed using static cultures, and their capability to convert inhibitors by oxidation and reduction was analyzed. RESULTS: Although two of the new strains were more sensitive than ATCC 23770 to furan aldehydes, one of the new strains showed superior resistance to both furan aldehydes and phenols, and also displayed high volumetric BNC yield (up to 14.78 ± 0.43 g/L) and high BNC yield on consumed sugar (0.59 ± 0.02 g/g). The inhibitors were oxidized and/or reduced by the strains to be less toxic. The four strains exhibited strong similarities with regard to predominant bioconversion products from the inhibitors, but displayed different capacity to convert the inhibitors, which may be related to the differences in inhibitor tolerance. CONCLUSIONS: This investigation provides information on different performance of four BNC-producing strains in the presence of lignocellulose-derived inhibitors. The results will be of benefit to the selection of more suitable strains for utilization of lignocellulosics in the process of BNC-production.

Effects of heterogeneous surface characteristics on hemocompatibility and cytocompatibility of bacterial nanocellulose.

The surface properties of cardiovascular biomaterials play a critical role in their biological responses. Although bacterial nanocellulose (BNC) materials have exhibited potential applications in cardiovascular implants, the impact of their surface characteristics on biocompatibility has rarely been studied. This study investigated the mechanism for the biocompatibility induced by the physicochemical properties of both sides of BNC. With greater wettability and smoothness, the upper BNC surface reduced protein adsorption by 25 % compared with the lower surface. This prolonged the plasma re-calcification time by 14 % in venous blood. Further, compared with the lower BNC surface, the upper BNC surface prolonged the activated partial thromboplastin time by 5 % and 4 % in arterial and venous blood, respectively. Moreover, the lower BNC surface with lesser rigidity, higher roughness, and sparser fiber structure promoted cell adhesion. The lower BNC surface enhanced the proliferation rate of L929 and HUVECs cells by 15 % and 13 %, respectively, compared with the upper BNC surface. With lesser stiffness, the lower BNC surface upregulated the expressions of CD31 and eNOS while down-regulating the ICAM-1 expression - This promoted the proliferation of HUVECs. The findings of this study will provide valuable insights into the design of blood contact materials and cardiovascular implants.

Chitosan particles embedded bacterial nanocellulose flat membrane for hemodialysis.

The development of bio-based hemodialysis membranes continues to be a challenge. Bacterial nanocellulose (BNC) membranes show potential in hemodialysis but can hardly retain beneficial proteins. Here, chitosan particles/bacterial nanocellulose (CSP/BNC) membranes were designed to efficiently remove uremic toxins and retain beneficial proteins. First, CSPs were synthesized in situ within a BNC membrane by ionic gelation following negative pressure impregnation. Subsequently, these membranes were thoroughly characterized. Compared with the BNC membrane, the pore volume and pore size of the 3 % CSP/BNC membrane decreased by 42.2 % and 32.1 %, respectively. The increased 22.2 times of Young's modulus and 88.9 % of tensile strength in the 3 % CSP/BNC membrane confirmed enhanced mechanical property. The sieving coefficient of bovine serum albumin decreased to 0.05 ± 0.03 in the 3 % CSP/BNC membrane. Moreover, the CSP/BNC membrane exhibited good hemocompatibility and cytocompatibility. The simulated dialysis results showed that the 3 % CSP/BNC membrane exhibited high clearance of urea (16.37 %/cm2) and lysozyme (3.54 %/cm2), while efficiently retaining bovine serum albumin (98.04 %/cm2). This is the first demonstration of the construction of a BNC-based hemodialysis membrane with in situ CSP formation to effectively regulate the pore properties of the membrane, making the CSP/BNC membrane a promising candidate for hemodialysis applications.

Synthesis of hemostatic aerogel of TEMPO-oxidized cellulose nanofibers/collagen/chitosan and in vivo/vitro evaluation.

The treatment of internal hemorrhage remains challenging due to the current limited antibacterial capability, hemostatic efficacy, and biocompatibility of hemostatic materials. The TEMPO-oxidized cellulose nanofibers/collagen/chitosan (TCNF/COL/CS) hemostatic aerogel was developed in this work by physically encasing COL in a sandwich structure and electrostatically self-assembling polyanionic TCNF with polycationic CS. In vitro coagulation experiments revealed the favorable procoagulant properties of TCNF/COL/CS along with high adhesion to erythrocytes and platelets. TCNF/COL/CS significantly increased the hemostatic efficacy by 59.8 % and decreased blood loss by 62.2 % in the liver injury model when compared to Surgicel®, the most frequently used hemostatic material. Furthermore, it demonstrated outstanding biodegradability both in vitro and in vivo, and a substantial increase in resistance (96.8 % against E. coli and 95.4 % against S. aureus) compared to TCNF. The significant hemostatic and biodegradable characteristics of TCNF/COL/CS can be ascribed to its interconnected porous structure, increased porosity, and efficient water absorption, along with the synergistic effect of the three constituents. The TCNF/COL/CS aerogel shows significant potential to control internal bleeding. A novel plant-derived nanocellulose composite aerogel has been described here for the first time; it has outstanding antibacterial characteristics, higher biocompatibility, and outstanding hemostatic characteristics in vivo.

Development and performance evaluation of a novel elastic bacterial nanocellulose/polyurethane small caliber artificial blood vessels.

There is an increasing demand for small-diameter blood vessels. Currently, there is no clinically available small-diameter artificial vessel. Bacterial nanocellulose (BNC) has vast potential for applications in artificial blood vessels due to its good biocompatibility. At the same time, medical polyurethane (PU) is a highly elastic polymer material widely used in artificial blood vessels. This study reports a composite small-diameter BNC/PU conduit using a non-solvent-induced phase separation method with the highly hydrophilic BNC tube as the skeleton and the hydrophobic polycarbonate PU as the filling material. The results revealed that the compliance and mechanical matching of BNC/PU tubes were higher than BNC tubes; the axial/radial mechanical strength, burst pressure, and suture strength were significantly improved; the blood compatibility and cell compatibility were also excellent. The molecular and subcutaneous embedding tests showed that the composite tubes had lighter inflammatory reactions. The results of the animal substitution experiments showed that the BNC/PU tubes kept blood flow unobstructed without tissue proliferation after implantation in rats for 9 months. Thus, the BNC/PU small-diameter vascular prosthesis had the potential for long-term patency and acted as an ideal material for small-diameter vessels.

Production of novel elastic bacterial nanocellulose/polyvinyl alcohol conduits via mercerization and phase separation for small-caliber vascular grafts application.

Size and properties of tubular bacterial nanocellulose (BNC) can be regulated by controllable mercerization with thinner tube walls, better mechanical properties, and improved biocompatibility. Although mercerized BNC (MBNC) conduits have considerable potential as small-caliber vascular grafts (<6 mm), poor suture retention and lack of compliance that cannot match natural blood vessels increase the difficulty of surgery and limit potential clinical application. Polyvinyl alcohol (PVA) is a kind of hydrophilic polymer with good biocompatibility and elasticity, which can precipitate in alkaline solutions. In this study, novel elastic mercerized BNC/PVA conduits (MBP) are manufactured combining mercerization of BNC tubes with precipitation and phase separation of PVA with thinner tube wall, improved suture retention, better elasticity, good hemocompatibility and great cytocompatibility. The MBP obtained with 12.5 % PVA is selected for transplantation in a rat abdominal aorta model. For 32 weeks, normal blood flow is observed using Doppler sonographic inspection, which demonstrates long-term patency. Immunofluorescence staining results also indicate the formation of endothelium and smooth muscle layers. The results indicate the introduction of PVA, and its phase separation into mercerization of tubular BNC can endow MBP conduits with better compliance and suture retention, making it a promising candidate for blood vessel replacement.

Vascular cells responses to controlled surface structure and properties of bacterial nanocellulose artificial blood vessel after mercerization.

Therapeutic benefits of small caliber artificial blood vessels to cure cardio and cerebrovascular diseases are mainly limited by their low patency during long-term transplantation. Bacterial nanocellulose (BNC), as a natural polysaccharide mainly synthesized by a bacterium Komagataeibatacter xylinus, has shown great potential in small-caliber vascular graft applications due to its shape controllability, and furthermore its physical surface structure can be adjusted with different treatments. However, influences of physical surface structure and properties of BNC conduits on behaviors of vascular cells have not been investigated. In this work, mercerized BNC conduits (MBNC) with different surface roughness and stiffness were constructed by controlled alkali (NaOH) treatment. The changes of surface structures and properties significantly affected the behaviors of vascular cells and gene expression; meanwhile, the cell seeding density also affected the cell responses. After mercerization with NaOH concentration > 10 %, it was observed that the increased stiffness of MBNC decreased several functional gene expressions of human vascular endothelial cells, and the pathological transformation of smooth muscle cells was inhibited. This study demonstrates physical surface structure of MBNC conduits will critically regulate functions and behaviors of vascular cells and it also provides important designing parameters to improve the long-term patency of BNC-based conduits.

A recombinant strain of Komagataeibacter xylinus ATCC 23770 for production of bacterial cellulose from mannose-rich resources.

The development of bacterial cellulose (BC) industrialization has been seriously affected by its production. Mannose/mannan is an essential component in many biomass resources, but Komagataeibacter xylinus uses mannose in an ineffective way, resulting in waste. The aim of this study was to construct recombinant bacteria to use mannose-rich biomass efficiently as an alternative and inexpensive carbon source in place of the more commonly used glucose. This strategy aimed at modification of the mannose catabolic pathway via genetic engineering of K. xylinus ATCC 23770 strain through expression of mannose kinase and phosphomannose isomerase genes from the Escherichia coli K-12 strain. Recombinant and wild-type strains were cultured under conditions of glucose and mannose respectively as sole carbon sources. The fermentation process and physicochemical properties of BC were investigated in detail in the strains cultured in mannose media. The comparison showed that with mannose as the sole carbon source, the BC yield from the recombinant strain increased by 84%, and its tensile strength and elongation were increased 1.7 fold, while Young's modulus was increased 1.3 fold. The results demonstrated a successful improvement in BC yield and properties on mannose-based medium compared with the wild-type strain. Thus, the strategy of modifying the mannose catabolic pathway of K. xylinus is feasible and has significant potential in reducing the production costs for industrial production of BC from mannose-rich biomass.

Evaluation of wet nanocellulose membranes produced by different bacterial strains for healing full-thickness skin defects.

Bacterial nanocellulose (BNC) is an excellent candidate biomaterial for wound dressing applications, although its preparation should consider the differences in wound healing resulting from BNC biosynthesized by different bacterial strains. This study design aimed to characterize the BNC produced by three different bacterial strains and compare their effectiveness for wound healing applications. The results demonstrated that the upper surfaces of the BNC membranes were clearly denser and more compact than the lower surfaces, while all varieties were capable of serving as a physical barrier to the invasion of bacteria. The growth of fibroblasts demonstrated that the lower surfaces of BNC membranes exhibited biocompatibility superior to that of the upper surfaces. In vivo analysis indicated that, of all samples, wounds treated with the BNC membrane synthesized by DHU-WX-1 displayed the greatest wound repair efficacy. The results indicate that BNC biosynthesized by different strains displayed different wound healing effectiveness. Placing the lower surface of BNC membranes in contact with wounds, with the denser upper surface outward, satisfied the clinical requirements of a wound repair biomaterial.

Potential of a Composite Conduit with Bacterial Nanocellulose and Fish Gelatin for Application as Small-Diameter Artificial Blood Vessel.

Bacterial nanocellulose (BNC) has received great attention for application as an artificial blood vessel material. However, many results showed that pristine BNC could not perfectly meet all the demands of blood vessels, especially for rapid endothelialization. In order to improve the properties of small-caliber vessels, different concentrations of fish gelatin (Gel) were deposited into the 3D network tubes and their properties were explored. The BNC/Gel composite tubes were treated with glutaraldehyde to crosslink BNC and fish gelatin. Compared with pristine BNC tubes, the BNC/Gel tubes had a certain improvement in mechanical properties. In vitro cell culture demonstrated that the human endothelial cells (HUVECs) and human smooth muscle cells (HSMCs) planted on the internal walls of BNC/Gel tubes showed better adhesion, higher proliferation and differentiation potential, and a better anticoagulation property, as compared to the cells cultured on pristine BNC tubes. Whole-blood coagulation experiments showed that the BNC/Gel tube had better properties than the BNC tube, and the hemolysis rate of all samples was less than 1.0%, satisfying the international standards for medical materials. An increase in the content of fish gelatin also increased the mechanical properties and the biocompatibility of small-caliber vessels. Considering the properties of BNC/Gel tubes, 1.0 wt/v% was selected as the most appropriate concentration of fish gelatin for a composite.

A poly-l-lysine-bonded TEMPO-oxidized bacterial nanocellulose-based antibacterial dressing for infected wound treatment.

Oxidized bacterial nanocellulose (O-BNC) is a favorable material to subdue bacterial infection because of the carboxylate content that not only has a weak antibacterial activity but also is capable of bonding electrostatically to polycationic antibacterial agents. In this study, the 2,2,6,6-Tetramethylpiperidinyloxy radical (TEMPO)-mediated oxidation of BNC was optimized to achieve high carboxylate content while retaining an acceptable tensile profile. To develop an O-BNC-based functional wound dressing, ε-poly-l-lysine (PLL) was then covalently bonded with O-BNC via 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) reaction after homogeneous distribution by ultrasonication. The antibacterial activity of the obtained wound dressing was significantly higher (p < 0.05), and no toxicity was observed. The infected full-thickness wounds of rats were healed faster (p < 0.05) covered by the dressing due to less inflammation, faster blood vessel proliferation, and epidermal layer formation. The material is an effective and promising functional dressing for the treatment of infected wounds.

Super solvent of cellulose with extra high solubility for tunable cellulose structure with versatile application.

Low-temperature two-step concentrated H2SO4 was discovered to be a solvent with high cellulose solubility [>300 g/L (17 wt%)], fast cellulose dissolution, high regeneration yield (>0.92 g/g), and cellulose being mouldable during regeneration. The superior performance was enabled by the much better compatibility of cellulose with lower concentrated H2SO4 at low temperature, compared with that of high concentrated H2SO4. The regenerated cellulose was characterized by mostly unchanged composition and highly tunable degree of polymerization (DP). The H2SO4 starting content, cotton fibre temperature, dissolution temperature, regeneration temperature, regeneration bath and storage time were factors determining the DP of regenerated cellulose, which could be equivalent to 4-90 % of the original cotton. These advantages of the solvent enabled versatile application in fabrication of extra strong cellulose hydrogels, manufacture of strong cellulose fibres, preparation of various homogenous composites which would be prepared with much more difficulty by using other solvents, and facile manufacture of cellooligosaccharides.

Homogeneous and efficient production of a bacterial nanocellulose-lactoferrin-collagen composite under an electric field as a matrix to promote wound healing.

BNC was functionalized with collagen (COL) and lactoferrin (LF) to form three different composites: BNC/COL, BNC/LF and BNC/LF/COL using a novel electrophoresis-based technology. The technology is less time-consuming than traditional immersion-adsorption methods and offers the additional advantages of greater protein loading, better homogeneity and a lower requirement for processing solution. Significantly, it has general applicability and great potential for fabricating other similar composites. The water-holding capability and water vapor transmission rate (WVTR) of BNC composites were significantly improved, particularly in the case of BNC/LF/COL, with a WVTR of 2600 g m-2 d-1, indicating that the composite maintains a moderately moist environment over the wound bed, which would enhance epithelial cell migration during the healing process. Compared with BNC and BNC/COL, the LF-impregnated composites mediated a reduction in bacterial viability of at least 77%. Impregnation with COL significantly improved the cytocompatibility of BNC composites to promote the adhesion and proliferation of fibroblast cells. Furthermore, a greater therapeutic effect of BNC/LF/COL was observed in a rat model of wound healing, with a new epithelium formed within 9 days and without any significant adverse reactions. These results suggest that BNC/LF/COL obtained using the electrophoresis method represents a promising wound dressing for use in practical applications.

Implantation of air-dried bacterial nanocellulose conduits in a small-caliber vascular prosthesis rabbit model.

There are no small-caliber (<6 mm) vascular prostheses so far commercially available around the globe. Bacterial nanocellulose (BNC) is considered a promising material for small-caliber artificial blood vessel applications. Although BNC hydrogel-like (BNC-Gel) materials possess a 3D network structure, facilitating nutrient exchange when used as vascular prostheses, they are difficult to suture during surgery due to their softness. Furthermore, a water content greater than 99% prevents the material from convenient methods of preservation and transport. Air-drying the BNC (BNC-Dry) would solve these problems. The comparative morphology, mechanical properties, hemocompatibility, and cytocompatibility of the BNC-Gel and BNC-Dry conduits of 3 mm in diameter were recorded in the present study, the results indicating that the mechanical properties, hemocompatibility, and cytocompatibility of BNC-Dry conduits were superior to conduits of BNC-Gel. Forty-six days after replacement of the carotid artery in New Zealand white rabbits, the BNC-Dry conduits remained patent. Composite blood vessels composed of cellulose and autologous tissue were harvested for immunohistochemistry and immunofluorescence staining. Sections demonstrated that the outer walls of the conduits were wrapped with autologous tissue. Contractile smooth muscle cells (SMCs) were observed on the outer surface of the conduit, similar to that observed in natural blood vessels. BNC-Dry conduits exhibited excellent performance and possessed properties convenient for surgical applications as small-diameter blood vessels.

A novel approach for efficient fabrication of chitosan nanoparticles-embedded bacterial nanocellulose conduits.

Incorporation of chitosan (CS) into Bacterial nanocellulose (BNC) matrix is of great interests in biomedical field due to the advantageous properties of each material. However, the conventional strategies result in poor composite effect with low efficiency. In this study, the three-dimensional fibrillar network of BNC was utilized as a template for the first time to homogeneously disperse CS to form nanoparticles (CSNPs) in BNC matrix via ionic gelation method, to develop chitosan nanoparticles-embedded bacterial nanocellulose (CSNPs-BNC) composites. This composite method is simple and efficient, without introducing dispersants and crosslinking agents, while retaining the mechanical properties and native 3D network structure of BNC. The CSNPs-BNC composites had excellent antibacterial activity to support potential clinical application. The CSNPs-BNC composites could promote the adhesion and proliferation of Schwann cells, and demonstrate good biocompatibility both in vitro and in vivo. The results indicated that CSNPs-BNC can provide a promising candidate for biomedical applications.

Functionalization of Aminoalkylsilane-Grafted Bacterial Nanocellulose with ZnO-NPs-Doped Pullulan Electrospun Nanofibers for Multifunctional Wound Dressing.

High moisture permeability, excellent mechanical properties in a wet state, high water-holding capability, and high exudate absorption make bacterial nanocellulose (BNC) a favorable candidate for biomedical device production, especially wound dressings. The lack of antibacterial activity and healing-promoting ability are the main drawbacks that limit its wide application. Pullulan (Pul) is a nontoxic polymer that can promote wound healing. Zinc oxide nanoparticles (ZnO-NPs) are well-known as a safe antibacterial agent. In this study, aminoalkylsilane was chemically grafted on a BNC membrane (A-g-BNC) and used as a bridge to combine BNC with Pul-ZnO-NPs hybrid electrospun nanofibers. FTIR results confirmed the successful production of A-g-BNC/Pul-ZnO. The obtained dressing demonstrated blood clotting performance better than that of BNC. The dressing showed an ability to release ZnO, and its antibacterial activity was up to 5 log values higher than that of BNC. The cytotoxicity of the dressing toward L929 fibroblast cells clearly showed safety due to the proliferation of fibroblast cells. The animal test in a rat model indicated faster healing and re-epithelialization, small blood vessel formation, and collagen synthesis in the wounds covered by A-g-BNC/Pul-ZnO. The new functional dressing, fabricated with a cost-effective and easy method, not only showed excellent antibacterial activity but could also accelerate wound healing.